Undo Message Delete command is sometimes present, sometimes not

I've noticed that sometimes the Undo Message Delete command is present after I delete a message
but other times it isn't - all that's there is Undo which is greyed out. Does anyone know the conditions
under which the Undo Message Delete command appears? I haven't found any consistent pattern.
I know the message can be manually moved back from the Trash but I've found that occasionally I've inadvertently
deleted a message without knowing which message it is which makes it rather hard to find in the Trash.

Open your firewall program. First check the settings. Make sure that the
program is set to tell you if a new program wants access to the web. Then
go to the list of programs the firewall has. Make sure that all the programs
you want to access the web are set to '''ALLOW'''. If it is set to '''AUTO''', the
firewall may not allow access.
====================================
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Similar Messages

Content of message deleted to save memory

Hi experts,
When I click on "details" tab in message Monitoring. It gives message "Content of message deleted to save memory" and does not show the Payload of the messages too.
Please let me know wht does this means"Content of message deleted to save memory"??
thanks in advance

Hi!
Abishek's tip is well for the Java part (RWB/Adapter Engine message persisting - you will have to set a parameter there).
In SXMB_MONI you will see ...
1. only the ABAP part of the messages (not message content in Adapter Engine - therefore you need RWB)
2. synch messages only if you have configured for persisting synchronous messages in ABAP stack.
You can do that in SXMB_ADM -> Configure Integration Engine -> Category RUNTIME -> LOGGING and/or LOGGING_SYNC -> set to 1 (0 per Default).
Regards,
Volker

Delete command sometimes error in CS6

Sometimes in CS6 the delete command just acts as a non-optional "clear" command, and does not show a menu providing the content aware option. Sometimes this cures itself by closing and reopening the program. Sometimes not.
How do I get rid of this defect in the program, why is it there, and have others experienced this?

It depends on whether you're on a layer or on the background.
If on a layer, it's a delete. If on the background it's a fill. That's the design behavior.
There are modifier keys (e.g. Shift) you can use if you always want a fill.
-Noel

'Undo' no longer working in Outlook inbox after a message delete

I've been using Outlook 2010 for a couple of years; I used to occasionally use 'Undo' (or ctrl-Z) to bring back a message I had just deleted from Inbox after reading it. It was a limited undo - I could only bring back the one message - but it did get back
a single message if I had just been a bit too hasty with the Del key.
Now recently that no longer works - instead of getting the message back, after a few seconds I get a dialog message "Cannot undo. Operation failed. The item was either moved or deleted after it was copied, or you do not have permission". If I go
to the 'Deleted Items' folder the message is there and can be either opened or dragged back to the Inbox, so I can get it back but it is a nuisance to lose the quick undo.
Has this behavior been changed by a software update? I don't believe I have changed any account settings or Outlook option settings, but if this is controlled by an option can someone point me to it? I've tried searching the 'Help' and found nothing relevant.
Thanks in advance
Steve M.

I suspect that you have only downloaded message header and the headers that were not yet downloaded remain marked for deletion, and there is not an option on the
Edit menu to undelete the selected item.
Go to Define Send/Receive Group and set download message completely for your account.
http://support.microsoft.com/kb/281366
When you delete a header and delete a downloaded message item, it is two distinct processes. When you click an item and either drag it to the deleted items folder (in Microsoft Outlook) or click the
Delete button, the item is moved from the Inbox folder to the Deleted Items folder. If you click
Undelete, it moves the item back. If you delete a header (the item has not yet been downloaded), it only marks the item for deletion. Until the command to delete is sent back to the e-mail server where the item still remains, the item is not
un-marked for deletion. This is the difference between client-side processing and server-side processing. Until the server receives the command to delete the message, the item remains marked for deletion. The only way to "unmark" the item is to right-click
that item, and then click to select Unmark selected headers.
Tony Chen
TechNet Community Support

Sometimes when I close Firefox and try to open it in few moments it shows me message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, I haven't o

Sometimes when I close Firefox and try to open it in few moments it shows me message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, I haven't opened any additional Firefox related programs, and previous Firefox is closed. First I though it is because of my computer, but then I discovered that other people have the same problem as well
== This happened ==
A few times a week
== some 2 month ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; InfoPath.2; .NET CLR 3.0.30729)

Hi Andis.
First of all, this is completely normal behavior, although it's a bit irritating, I know. What happens is that when you close Firefox, despite the window disappearing right there and then, Firefox keeps running for a little bit until the whole closing procedure is completed. This can take a fraction of a second on fast computers, or can take a few seconds on slow computers or when Firefox is storing a large session (if you save your tabs). All you have to do is wait a bit until Firefox closes, and then open it again.
To see if it's still running, you can press CTRL+SHIFT+ESC and then, under the Processes tab, you can see if firefox.exe is still there. If it's taking an unusual amount of time to close (which happens very rarely, and only if the browser freezes on exit), you can force the application to terminate from this application (task manager).
Firefox 4.0 will reduce by 97% the time it takes firefox.exe to close, so this problem will be basically erased for Firefox's next version.
Until then, I can recommend you this extension, which helps you restart your browser more easily and without bothering about closing times:
https://addons.mozilla.org/en-US/firefox/addon/3559/
Hopefully this will help.

ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css   Also: "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." I have Java enabled in all browsers

ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css    Command then fails
Also: "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." I have Java enabled in all browsers
Thoughts? Using Presenter 10 Win 8.1 Intel I7 new HP with plenty of memory
               Thanks

I had saved one copy as an .asp but then resaved it to .xhtml
I'm assuming this is a static web site. Rename (F2) all your pages with .html or .htm extension.
.xhtml is not a valid extension.
Nancy O.

After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menues, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.

After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menus, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.
== This happened ==
Every time Firefox opened
== After upgrading to 3.6

Step by step, how did you arrive at seeing this agreement?

On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezinginsending

On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezing problem while it sends

See:
iOS: Troubleshooting Messages
However, I suspect it is just a tempery network problem beyond your control

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Sent messages are sometimes not saved

Hello,
This is a follow up to this thread, which was never answered and is now archived:
http://discussions.apple.com/thread.jspa?threadID=2213207
In Mail.app, using IMAP, my sent messages are sometimes not saved. I'd say about 1 in 20 never appear in my Sent folder. The recipients always receive these messages, so it's not a delivery problem. I just don't retain a copy of them. This is very frustrating if I send a cost estimate to a client, or a detailed description of a technical problem that I need to refer back to later.
I've rebuilt my mailboxes and I've checked my IMAP folders on the server via a webmail interface, and the messages are not there.
Has anyone else experienced this? It's hard to believe I'm the only one, but it's hard to search for this problem because my search results are always full of people who have lost or can't save -any- of their sent messages. My problem is intermittent and random.
Thanks,
-Arlo

I have a similar occasional problem with an IMAP account using a Comcast Business Class Exchange server. I use Mail and my iPhone to access the account; I'm running OS X 10.6.4 on my laptop but my "sent messages" issue predates the latest release.
The first time I noticed this issue I thought, "I'll just access my mail via the Comcast web portal. It'll be in the 'sent' folder there." No dice. The "sent" messages simply never stay on the server, yet my recipients get them.
It's distressing. First, the solution would appear to be a switch to a MS mail client, which I swore off years ago. Second, I rely on having a "sent" message as a record. I switched off IDLE per your suggestion, Ernie, but otherwise I'm in the same boat as the others here. Please keep this thread alive. I'm hopeful that this can be resolved.

When I open a message in Thunderbird, I sometimes get the message content of the preceding message.

When I open a message in Thunderbird, I sometimes get the message content of the preceding message.
This means that the whole content of the message is replaced by the content of the preceding message. I cannot see the message and have to ask the sender to send it again. Why is this, is my mail system overloaded or what?

This usually indicates folder corruption.
Right click the problem folder and select Properties. Then Repair Folder.
Be prepared to lose messages if the corruption is too bad. It might be a good idea to move any messages that you want to keep to a new folder. Make folders under Local Folders to sort your keeper emails into. It is a good idea not to keep lots of mail in the Inbox anyway as you will see when you read the attached article.
Read this article about maintaining your system to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

JMS messages sometimes not received by Flex client

We have a problem that Flex client is sometimes not able to
receive JMS messages from a JBoss JMS Queue. Most of the time it
works, but if users logout/login using the same account frequently
or you restart JBoss 4.0.4 during their session then it might
happen. Then it doesn't work at all even if you wait. Client is
able to send messages when this problem occurs, which can then be
intercepted by other clients but cannot receive any messages from
himself or from the others. JBoss 4.0.4 is running in cluster mode.
Could it be that there is an old frozen session which is receiving
the messages meant for the new client?(consumer selector is unique
to each user, but if a user logs in twice, the same selector is
used) If I run 2 instances of my JMS test consumer using the same
selector then the consumer which registered later receives the
messages and if it quits, then the older consumer starts receving
them. This doesn't occur in Flex.
Flex is running on Tomcat 5.5.17.
Our messaging-config.xml is
<?xml version="1.0" encoding="UTF-8"?>
<service id="message-service"
class="flex.messaging.services.MessageService"
messageTypes="flex.messaging.messages.AsyncMessage">
<adapters>
<adapter-definition id="actionscript"
class="flex.messaging.services.messaging.adapters.ActionScriptAdapter"
default="true" />
<adapter-definition id="jms"
class="flex.messaging.services.messaging.adapters.JMSAdapter"/>
</adapters>
<destination id="JMSQueueB">
<properties>
<network>
<session-timeout>10</session-timeout>
</network>
<jms>
<initial-context-environment>
<property>
<name>java.naming.factory.url.pkgs</name>
<value>org.jboss.naming:org.jnp.interfaces</value>
</property>
<property>
<name>Context.PROVIDER_URL</name>
<value>jnp://x.x.x.x:1100,jnp://x.x.x.y:1100</value>
</property>
<property>
<name>Context.INITIAL_CONTEXT_FACTORY</name>
<value>org.jnp.interfaces.NamingContextFactory</value>
</property>
</initial-context-environment>
<destination-type>Queue</destination-type>
<message-type>javax.jms.TextMessage</message-type>
<connection-factory>ConnectionFactory</connection-factory>
<destination-jndi-name>queue/B</destination-jndi-name>
<destination-name>B</destination-name>
<delivery-mode>PERSISTENT</delivery-mode>
<message-priority>DEFAULT_PRIORITY</message-priority>
<acknowledge-mode>AUTO_ACKNOWLEDGE</acknowledge-mode>
<transacted-sessions>false</transacted-sessions>
</jms>
</properties>
<channels>
<channel ref="my-rtmp"/>
<channel ref="my-secure-amf"/>
</channels>
<adapter ref="jms"/>
</destination>
</service>
Part of our actionscript code:
pmConsumer = new Consumer();
pmConsumer.destination = "JMSQueueB";
pmConsumer.selector = "some jms selector ....";
pmConsumer.addEventListener(MessageEvent.MESSAGE,
presenceMessageHandler);
pmConsumer.addEventListener(MessageFaultEvent.FAULT,
faultHandler);
pmConsumer.addEventListener(ChannelFaultEvent.FAULT,
channelFaultHandler);
pmConsumer.subscribe();
Also Flex seems to be handing channel switching incorrectly,
if rtmp port is firewalled, it won't use amf properly even though
it was given 2 channels in configuration file and JMS messaging
doesn't work. We have to alter the channel set during runtime.
Flex also doesn't automatically switch to other JMS server if
one goes down. Is this a feature or a bug? We have to reset
producer and consumer in order for this to work.

Hi,
It was in earlier version of the OS that you could turn Bonjour On and Off.
If this can be done in Leopard and Snow Leopard I have not found it yet. (But I don't look that often and nor for very long)
This Forum may help with that
I would also try a PRAM reset. (on Both computers)
Shut down the computer.
Restart it holding down APPLE(or ⌘)ALT+PR Keys until you have heard three Start Up Bongs.
7:18 PM Tuesday; December 8, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

TS4006 is there a way to undo the "Erase" command before the deletion starts?

is there a way to undo the "Erase" command before the deletion starts while the phone is turned off. In my case the erase is pending the phone being turned on. Now that I have found the phone, I don't want the deletion to happen. How can I undo the command before turning on the iPhone?

There's no way to block the remote wipe. But once it's been wiped, you can perform a restore from your backup on either icloud or itunes.

Why does my iPhone SOMETIMES not sound alert for new Messages?

Sometimes the iPhone (7.1) will peep with whatever sound is selected and sometimes not. I expect there's some pattern to this, maybe even a setting but I've not been able to dope that out. The two iPhones in my family both behave similarly, so I don't think it's a hardware or software error.
At first, I thought no-peeping happened when Messages was open on the screen, but then I caught it peeping like that. Now I'm puzzled - can anyone clue me in on what rule/algorithm/controls are for this?
Thanks!

Go to Settings>Notifications>Messages>Repeat Alerts
Change this to "Never" and it might help. If not, then you may have the same alert sound you use for messages for another app such as Mail, meaning whenever you were to get mail, it would make the sound, yet no notification pops up due to your default settings. This is the most likely possibility.

I DO NOT get ALL email messages from folks that say they sent me an email. I can get them sometimes and sometimes not.

There are folks that send me emails all the time. Sometimes they come in and most times they don't They are always telling me that they sent me an email and I have not received it. When I tell them to send it NOW as I am sitting at the computer, then the email comes in for the first time. This has been happening since I downloaded Thunderbird. Please tell me why this happens as it if a bit frustrating, especially when they don't know I have not received their email and the information is very important that I get the email and the information they are sending me.
Thank you for your assistance.
barbi saunders

Thunderbird downloads email messages that make it into your Inbox on your providers server. Are these missing messages actually in the Inbox and are not downloaded or do they not make it to the Inbox on the server.
If the later, ask your provider where your mail is going.
It might not hurt to log into your account on the server and check for a spam folder. You might be surprised to see what is in there.

Undo Message Delete command is sometimes present, sometimes not

Similar Messages

Maybe you are looking for