Undocumented system messages issued by T3+ Storage Array

Hi,
     we have a T3+ Storage Array.
     From several days i've been seeing messages in the logs, issued by the T3+, like these below:
     Sep 01 14:06:22 t3.domain.tld SNXT[1]: N: u1ctr Failed writing system area err=14
     Sep 01 14:06:22 t3.domain.tld MASD[1]: N: u1ctr Failed writing system area err=14
     Sep 01 14:06:22 t3.domain.tld MNXT[1]: N: u1ctr Failed writing system area err=14
     I've searched the net and SunSolve, but didn't find any relevent information.
     Could someone direct me to the possible reasons/problems messages are related to ?
     Thanks in advance!
          Vladimir

I have the same problem on my thinkpad T500 after I upgrade the wireless card (intel wifi link 5300).
For a long time I didn't understand the why of this behavior, but some weeks ago I realise that the problem can solve it hard-locking the wireless card and unlocking after the step: "loading modules".
For more information this is the complete thread on thinkpad forum that I wrote when I try to solve this issue: http://lnv.lithium.com/t5/T400-T500-and … 870#M26238
I apologize if you do not understand what I mean, the problem is that I have some difficulties to express myself in English

Similar Messages

  • SRM 5 BBPSTART - System ID and System Messages issues

    Hi all,
    We just upgraded to SRM 5.0 from SRM 3.0
    The shopping cart logon page(bbpstart) doesn't show System ID and also the system Messages also doesn't work on browser when we set message by sm02.
    I already checked "System ID" and "System messages" from "Select Display" under System Logon Settings from bbpstart>Error Pages>Logon Errors>Configuration>System Logon Settings.
    I searched over the net and can't find anything. I only found a notes for the System messages, but it was for the older release and SRM 5 already applied that note. So I don't know what else I can do.
    Thanks for the itime.
    Kev

    Hello Thomas,
    It is not possible to run a system landscape with 2 identical SID's. And even if you do get it running in some kind of freeky way the system would be very instable (how would you know a transport has gone to the right system?).
    A system copy and a <SID> change is still possible. However, SAP recommends to do an export and an import of your database. Allthough this is the best and the least confusing way (and labour extensive), it is not really necessary.
    If you do a backup/restore procedure with a <SID> change, lets say from PRD to DEV, you will end up with a system that has DEV as <SID> but your tablespaces will look like PSAP-PRD-620. The owner of the database will also be sapprd. This is no problem at all to run the system, it is only confusing.
    I know it works, I've got it running. I've also got a sandbox running with user saptsc and database owner cbdamd and <SID> CBD.
    Kind regards,
    Pascal Ottens

  • Just had to wipe and my Mac but I'm still getting storage message issues.  The About Storage screen says I have 285GB of "Other."  What is it?  Where is it?

    Just had to wipe and my Mac but I'm still getting storage message issues.  The About Storage screen says I have 285GB of "Other."  What is it?  Where is it?  I can't even restore my photo library.

    This should help you understand http://pondini.org/OSX/LionStorage.html

  • Sun Java(tm) System Messaging Server 6.3-0.15 outgoing mail issue

    Hi,
    We are running Sun Java(tm) System Messaging Server 6.3-0.15 (built Feb  9 2007).
    with this java code if i change  email.setFrom(SenderEmial);   to any other email address than the mail server will send email form that email instead of authenticated which is a problem for us so that any one can misuse it. i need help regarding this issue.I think its due to lack of SSL security so i want to know that how i can enable SSL.
      Email email = new SimpleEmail();
        email.setSmtpPort(25);
        email.setAuthenticator(new DefaultAuthenticator("[email protected]","myPass"));
        email.setDebug(false);
        email.setHostName("mail.sunjavamail.com");
        email.setFrom(SenderEmial);  //By changing this my mail server is sending emails from any email address.
        email.setSubject("Hi");
        email.setMsg("Test Mail");
        email.addTo("[email protected]");
          // email.setTLS(true);
       // email.setSSL(true);
        email.send();
        System.out.println("Done");
    Thanks..

    Hi,
    I do not think this is unusual.  Out of the box there are no restrictions on From: addresses, they're not required to match the domain of the sender or match up with DNS results.  You can configure various restrictions or even modify the from address based on the users authenticated credentials, but not by default. 
    See the following documentation for details on restricting From: addresses:
    https://wikis.oracle.com/display/CommSuite/Mail+Filtering+and+Access+Control#MailFilteringandAccessControl-FROMACCESSDescription
    https://wikis.oracle.com/display/CommSuite/Handling+Forged+Email+by+Using+the+Sender+Policy+Framework

  • Sparc Storage Array 200: HOWTO?

    Hi, I have a sun enterprise 5000 machine up and running with Solaris 10. I also have a Sparc Storage Array 200 which connects via a fibre channel to the machine. I have tried to search for documentation online, but can�t seem to find any on Sun�s website. What I was able to find out is that that there is a program called ssaadm which might help me talk to the array. However that program is not installed and when I do pkgadd it tells me that no packages were found in /var/spool/pkg. I�m very use to the some GNU/linux package management systems (such as apt (debian) or emerge (gentoo)), and they just get the packages online from the repository and download, (compile), and install them. I also cant find any info as what the dev nodes will be for the fibre card (I dont even know if solaris has drivers for it). If anyone could either tell me what needs to be done or point me in the direction of documentation I would greatly like that. Thanks.

    drop down to Solaris 9... if you really want to use the SSA, then Solaris 9 was the last OS that supported it...
    I doubt there is any support in Linux...
    haroldkarl
    oh yes... documentation... docs.sun.com...
    ftp://192.18.109.11/802-2041/802-2041.pdf
    Message was edited by:
    haroldb

  • VNX Storage Arrays

    Good Morning!
    Are many folks running OVM 3 with a VNX storage array? I'm trying to flesh out the support status.
    Right now, the paths look great by default in OVS with =multipath -ll=, but they aren't showing as happy to the VNX, apparently because OVS doesn't have PowerPath or any other agents running. I'm not sure if I should be loading up PowerPath or maybe the Unisphere agent inside the OVS or not.
    How are folks configured with their VNX? Have you guys had support issues, either with Oracle or with EMC? How well is failover working for you?
    Thanks for any pointers!

    I very seriously considered VNX about 3 months ago for a Oracle VM project. I ended up going with a ZFS 7420. The ZFS scales a lot better and the jump from a 5300 to a 5500 was far too much in my eyes. Though I will says that EMC got very aggressive in their pricing. More than I thought they would.
    The main reason that I didn't like the VNX was due to powerpath. I've never used a EMC product without using powerpath and powerpath wasn't supported in Oracle VM 3 at the time. It might be now.... I'm not sure. Most storage vendors products work well with the native multipahting features within most systems. EMC is the exception. All this is mute if you're going to use Iscsi or NFS. I personally still prefer FC for databases. I just don't think you can beat it.
    Support for Oracle VM all the way through was very important to me. Not to mention the fact that if you buy Sun/Oracle hardware, support for everything is built in with premier support for systems.

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • Error in local message system; message 009999000035 not complete

    Hello All.
    I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
    SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
    and SAP_SV_FDB_NOTIF_BC_CREATE.
    However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
    I have also checked for Product_ID parameter which is not existing.
    One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
    So, this shows clearly that it is an issue with role/authorization.
    Please suggest me !!
    Thanks in advance.
    Regards,
    Satish.

    Hmm not really. Profiles for the roles are also generated?
    Those roles/profiles should be sufficient to create support messages.
    Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
    When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
    The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
    Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04?

  • System Message Shows in  Future Date

    Dear Experts,
    In Our SAP BI System , The System Message SM21 shows in Current & future date both problem messages
    SAP Server OS and SAP BI Application Time and date both are in sync
    The BI system which is connected to ECC PRD also having a sync
    Remote monitoring are not configured in this system,
    System Log: Local Analysis of GEEPASBIPRD                  2
    Date : 22.12.2010
    Time     Type Nr  Clt User         TCode Priority Grp N Text
    10:02:54 DIA  001 350 GPKWTHOFI03                 BY  E Invalid parameter ObjTooLar
    10:04:07 DIA  001 350 GPKWTHOFI03                 BY  E Invalid parameter ObjTooLar
                       System Log: Local Analysis of GEEPASBIPRD                  3
    Date : 02.01.2201
    Time     Type Nr  Clt User         TCode Priority Grp N Text
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:90           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:90           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    71:31:41           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    71:31:41           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
                       System Log: Local Analysis of GEEPASBIPRD                  4
    Date : 03.01.2201
    Time     Type Nr  Clt User         TCode Priority Grp N Text
    00:20:85           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    00:20:85           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
                      System Log: Local Analysis of GEEPASBIPRD
              C o n t e n t s
    Content            Page         Start          End
    Selection criteria   1
                         2  22.12.2010 10:02:54 22.12.2010 10:04:07
                         3  02.01.2201 20:20:84 02.01.2201 90:20:84
                         4  03.01.2201 00:20:85 03.01.2201 00:20:90
                         5  02.01.3201 01:23:65 02.01.3201 90:40:42
                         6  03.01.3201 00:40:41 03.01.3201 11:62:24
                         7  02.01.4201 01:22:30 02.01.4201 90:40:42
                         8  03.01.4201 00:40:41 03.01.4201 11:62:24
                         9  02.01.7201 11:42:21 02.01.7201 31:71:95
                        10  02.01.9201 01:22:30 02.01.9201 81:41:10
                        11  03.01.9201 00:95:23 03.01.9201 11:11:94
                        12  02.01.A201 01:22:30 02.01.A201 81:41:10
                        13  03.01.A201 00:95:23 03.01.A201 11:62:24
                        14  02.01.E201 11:24:13 02.01.E201 71:50:52
                        15  02.01.I201 01:22:30 02.01.I201 81:41:10
                        16  03.01.I201 00:95:23 03.01.I201 11:62:24
                        17  02.01.R201 01:22:30 02.01.R201 81:41:10
                        18  03.01.R201 00:95:23 03.01.R201 11:62:24
    Contents            19
    Thanks
    Jai

    Hi Thahir,
    I deleted the SLOG and Restarted the system now its not showing the future date,
    Issue resolved.
    Thanks ,
    Jai

  • System message 38 from work area ssfcomposer does not exist in va03

    Hi,
    I created a smartform copy from standard, it is working good for all sales order,but for perticular one sale order it shwing error like
    system message 038 from work area ssfcomposer does not exist.
    i have long item line in this sale order what can i do please help me.
    Regards
    KK

    If I am not wrong, I guess you are using template/table inside your smartform.. which is causing the error.
    I issue could be because of the condition on the text inside the template which might be overlapping the output structure line and column. The issue can be also be because of your table cell.
    To trouble shoot place a false condition(like 1 = 2) first on table and if error still occurs then remove condition on table and place it on structure.
    I guess, the above answer will help you to close the thread.
    Regards,
    SaiRam

  • System messages related to Invoice Verification

    Hi Experts,
    Could you please explain when system will issue below four messages during MIRO (Invoice verification) transaction.
    M8   286   Different invoicing party & planned in purchase order & E E
    M8   287   Different invoicing party & planned for del. costs item in PO & E E
    M8   288   Different invoicing party & planned in purchase order & E E
    M8   289   Different invoicing party & planned for del. costs item in PO & E E
    Generally whenever business users are creating invoice with the vendor other than the PO vendor, system will issue these messages.
    But for above mentioned 4 messages, description is almost same. That's why I am confusing. In my case message nos 286 & 288 are very  important.
    I am getting messages no 286 during creation of Invoice with different vendor other than PO vendor.
    So for the remaining 3 messages, I am not able to test business processes.
    Could you please explain when system will issue these messages (other than 286) during MIRO.
    Thanks in advance
    Regards
    KRK

    Hi,
    As per my knowledge the first 2 (286,287)are standard and other 2 are copied from standard they only change that message numbers.
    Thanking you

  • Video Message Issue

    Hello, guys! I have a bit of an issue with the new video message feature of Skype. That is, the option to send a video message is grayed out on every contact I have on Skype, but my friends can send me video messages and I can view them without any problems.
    Skype version: 6.21.59.104 (searching for updates yields me that I have the latest version of Skype)
    Operating system: Windows 7 Home Premium Service Pack 1 (100% legal)
    Camera: Turbo-X 1080P Full HD with built-in microphone (functions perfectly during video calls)
    Internet Speed: Average of 100Mbps if I remember correctly. Fairly fast and functional 100% of the time (I don't know if it is relevant)
    Note: I have no Facebook or Live contacts on my contact list. I do not log in as Invisible. Some of my friends do, but the option is grayed out for everyone, not just those that are Invisible. The only personal modification I have done for Skype is to block the advertisments by blocking access to apps.skype.com through my Control Panel.
    Solved!
    Go to Solution.
    Attachments:
    video message issue.jpg ‏22 KB

    Wingmom23 wrote:
    It seems that everything you are telling me to do about video messaging is not working.   Even going to the Help, About to check for the latest version of Skype is not working.   I downloaded the latest version just in case.   I want to send a video message but the instructions tell me to 1. Click on the contact and then 2. Click on the plus sign.   When I click on the contact, I do not get a plus sign.   I get a dialog box that has a paper clip beside it.   I click on the paper clip and it has the "Send Video Message" there.   I click on that and Skype tells me there is a problem.   What do I need to do?
    Help please.    Thank you.
    Most likely you are on the new Skype version with a different design of user interface.
    http://blogs.skype.com/2014/12/18/here-are-the-skype-for-windows-layout-changes-that-you-requested/
    Please,  run the DirectX diagnostics tool (32-bit option).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Macbook sleeps with long delay and tons of system messages

    It takes my MacBook Pro a long time to go to sleep (4 minutes or more). During this time thousands of messages are produced in the System log.
    There are so many of them that some messages are discarded. Some of these messages:
    05/10/2014 16:31:08.000 kernel[0]: [0x445334a000, 0x2000]
    05/10/2014 16:31:08.000 kernel[0]: [0x445335c000, 0x2000]
    05/10/2014 16:31:08.000 kernel[0]: [0x4453372000, 0x2000]
    05/10/2014 16:31:08.000 kernel[0]: [0x4453384000, 0x2000]
    05/10/2014 16:31:08.000 kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    05/10/2014 16:31:09.000 kernel[0]: [0x2cb737000, 0x3000]
    05/10/2014 16:31:09.000 kernel[0]: [0x2cb84c000, 0x8000]
    05/10/2014 16:31:09.000 kernel[0]: [0x2cb855000, 0xb000]
    05/10/2014 16:31:09.000 kernel[0]: [0x2cb862000, 0x3000]
    What do these messages mean?
    I have tried, without success, the following things:
    - reinstall the system
    - perform a disk verification
    - repair file permissions
    - boot in safe mode
    What I have not tried is a hardware check, because I couldn't. (Starting up with D pressed has no effect and starting up with option-D pressed initiates the check, but this is aborted because my machine doesn't support it.)
    The behavior takes place with hibernation, not with "unsafe sleep".
    Machine: MacBook Pro 15" mid-2014, 2.4 GHz Core i5, 8GB memory, with Mac OS 10.9.5.
    System messages at the start of the sleep:
    05/10/2014 16:30:58.114 loginwindow[39]: CGSSetWindowTags: Invalid window 0xffffffff
    05/10/2014 16:30:59.404 WindowServer[100]: _CGXHWCaptureWindowList: No capable active display found.
    05/10/2014 16:31:05.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    05/10/2014 16:31:07.000 kernel[0]: hibernate image path: /var/vm/sleepimage
    05/10/2014 16:31:07.000 kernel[0]: efi pagecount 125
    05/10/2014 16:31:07.000 kernel[0]: hibernate_page_list_setall(preflight 1) start 0xffffff80e6133000, 0xffffff80e6173000
    05/10/2014 16:31:07.000 kernel[0]: hibernate_page_list_setall time: 258 ms
    05/10/2014 16:31:07.000 kernel[0]: pages 2044563, wire 264046, act 663382, inact 612315, cleaned 46 spec 1409, zf 27302, throt 0, compr 476063, xpmapped 40000
    05/10/2014 16:31:07.000 kernel[0]: could discard act 0 inact 0 purgeable 0 spec 0 cleaned 0
    05/10/2014 16:31:07.000 kernel[0]: WARNING: hibernate_page_list_setall skipped 87800 xpmapped pages
    05/10/2014 16:31:07.000 kernel[0]: hibernate_page_list_setall preflight pageCount 2044563 est comp 43 setfile 3898605568 min 4294967296
    05/10/2014 16:31:07.000 kernel[0]: [0x13b4cc3000, 0xbc9000]
    05/10/2014 16:31:07.000 kernel[0]: [0x13d0f85000, 0xbbc000]
    In between: thousands of these kernel messages
    System messages at the end of the sleep:
    05/10/2014 16:31:11.000 kernel[0]: [0x4624b20000, 0x1000]
    05/10/2014 16:31:11.000 kernel[0]: [0x4624b2c000, 0xe2000]
    05/10/2014 16:31:11.000 kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    05/10/2014 16:34:25.000 kernel[0]: hibernate_page_list_setall(preflight 0) start 0xffffff80e6133000, 0xffffff80e6173000
    05/10/2014 16:34:25.000 kernel[0]: hibernate_page_list_setall time: 296 ms
    05/10/2014 16:34:25.000 kernel[0]: pages 2048039, wire 266098, act 663683, inact 612389, cleaned 40 spec 1946, zf 27756, throt 0, compr 476127, xpmapped 40000
    05/10/2014 16:34:25.000 kernel[0]: could discard act 0 inact 0 purgeable 0 spec 0 cleaned 0
    05/10/2014 16:34:25.000 kernel[0]: WARNING: hibernate_page_list_setall skipped 87800 xpmapped pages
    05/10/2014 16:34:25.000 kernel[0]: hibernate_page_list_setall found pageCount 2048039
    05/10/2014 16:34:25.000 kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
    05/10/2014 16:34:25.000 kernel[0]: IOHibernatePollerOpen(0)
    05/10/2014 16:34:25.000 kernel[0]: encryptStart 9c190
    05/10/2014 16:34:25.000 kernel[0]: bitmap_size 0x3f784, previewSize 0x24f278, writing 2047182 pages @ 0x32ab8c
    05/10/2014 16:34:25.000 kernel[0]: encryptEnd 95f4600
    05/10/2014 16:34:25.000 kernel[0]: image1Size 0x1430d000, encryptStart1 0x9c190, End1 0x95f4600
    05/10/2014 16:34:25.000 kernel[0]: encryptStart 1430d000
    05/10/2014 16:34:25.000 kernel[0]: PMStats: Hibernate write took 192562 ms
    05/10/2014 16:34:25.000 kernel[0]: all time: 192562 ms, comp bytes: 6044094464 time: 5593 ms 1030 Mb/s, crypt bytes: 4112823408 time: 6386 ms 614 Mb/s,
    05/10/2014 16:34:25.000 kernel[0]: image 0 (0%), uncompressed 6044090368 (427032), compressed 4284058624 (70%), sum1 9a59058d, sum2 8143d3e0
    05/10/2014 16:34:25.000 kernel[0]: zeroPageCount 97178, wiredPagesEncrypted 155568, wiredPagesClear 109748, dirtyPagesEncrypted 1210326
    05/10/2014 16:34:25.000 kernel[0]: hibernate_write_image done(e00002e8)
    05/10/2014 16:34:25.000 kernel[0]: sleep
    05/10/2014 16:34:25.000 kernel[0]: Wake reason: EC LID0
    05/10/2014 16:34:25.000 kernel[0]: SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
    05/10/2014 16:34:38.000 kernel[0]: full wake (reason 1) 23 ms
    05/10/2014 16:34:38.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    05/10/2014 16:34:38.000 kernel[0]: Previous Sleep Cause: 5
    05/10/2014 16:34:38.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    05/10/2014 16:34:38.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    05/10/2014 16:34:38.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x1400 ****
    05/10/2014 16:34:38.616 WindowServer[100]: CGXDisplayDidWakeNotification [42269999693223]: posting kCGSDisplayDidWake
    05/10/2014 16:34:38.617 WindowServer[100]: handle_will_sleep_auth_and_shield_windows: Ordering out authw 0x7ff86b72bc70(2000), shield 0x7ff868f6d380(2001) (lock state: 2)
    05/10/2014 16:34:38.618 WindowServer[100]: handle_will_sleep_auth_and_shield_windows: errs 0x0, 0x0, 0x0
    05/10/2014 16:34:40.949 loginwindow[39]: ERROR | -[LWBuiltInScreenLockAuthLion closeAuthAndReset:] | Attempted to remove an observer when not observing
    05/10/2014 16:34:40.000 kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 5 on so 0xffffff8027164178
    05/10/2014 16:34:41.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  doing reconnect on /Volumes/.TMBACKUP-1

    Thanks for the tip. I checked out the link. The issue is not that my log files are large but it's that log messages (the same message over and over again) are being constantly written to that Console application - I guess by syslogd - at a crazy rate per second which is causing the CPU to spike and causing my Free RAM to go from say 3GB to a few MB's within a matter of seconds. I actually can't find a log file on my system (via Spotlight search or Terminal "grep" searching) that has the hundreds and thousands of messages showing up in the Console log app. syslogd just gets "crazy" and pretty much takes over the CPU and depletes my computer free RAM when handling those:
    0x0-0x18018.com.apple.logic.pro358 ARGH: preNdx < 0 (-1073741821)
    messages.

  • System message:Procurement of material&blocked for quality reasons(0006 883

    Hi Greetings!
    I have the following issue.
    I need to make the message "Procurement of material & blocked for quality reasons" as Error message . Message number - 00 06 883.
    This will not allow to create PO , if the "Blocking Function" - 02 "Block Request and Purchase order " is set in the QM info record.
    Even though i ahve set this message as "Error" in the configuration ( Materials Management --> Purchasing --> Define Attributes of System Messages), i am getting only warning message during PO creation.
    Can you please let me know if am missing any setting.
    Gobinathan G

    Dear sir,
    GO to material master of that item go to .. PURCHASING VIEW there is a Plant specific material status chk if that is 01- blocked for production 02- blocked for BOM chk and change it then system will allow you to purchase the parts.
    Kaustubh

Maybe you are looking for

  • Convert XML file to sap

    Dear friends               For converting XML file to SAP, I used TEXT_CONVERT_XML_TO_SAP function module. In this I have some doubt. Pls clarify this. 1. I am getting run time error with type h. 2  I_FIELD_SEPERATOR          = ';'    I_LINE_HEADER  

  • Acrobat X Pro Creative Cloud Subscription Asking for Serial Number

    I have a monthly paid acrobat x pro creative cloud subscription, but it keeps asking me to license my software and input a serial number. The trial period is done, so I cannot use this software that I am paying for.

  • Itunes to network

    Is there a way to move my iTunes library from the HD on my Mac to a hard drive connected to an Airport Extreme or a hard drive connected to a Time Capsule? I'm trying to free up some space on my hard drive.

  • Your Computer Does Not Have Sufficient Memory Resources to Compress SWF File

    I'm sure I'm not the first person to hit this error. And under most circumstances, I would shrug it off and work on cutting the size of the presentation I'm working on down. However, this particular instance of the error is baffling. To begin, I impo

  • Enhacement for VA01

    Hi!     In VA01 i want to insert a new field  with F4 functionality if you press F4 created sales order and contract to be displayed. thanks and regards. siva