Undoing the changes made to DSO

Hi
One of our developers had modified one DSO and its transformation etc long time back and since the change was put on hold did not transport it to Quality or Prod. Now we have to make other changes and transport these. Is there any way to identify the changes made before, other than manually comparing with Prod and removing one by one.
Is there any table which has change version or some other info.
Please let us know.
Thanks In Advance
Aparna

Hi Aparna,
Not sure about transformations, but you can get for the DSOs by a roundabout technique. In your DEV box, go into SE11 and open up the active data table of the DSO.
Then, follow the menu path Utilities --> Versions --> Version Management. A new screen will open up, and at the top there will be a button called Remote Comparison. Click it, and then enter your production system's ID in the Target Sys field.
It will then show you a list of differences between the production and the development DSOs. This should avoid the manual comparison bit for all the InfoObjects, though you'll still have to check manually for stuff like Nav Attribs, DSO properties etc.
Regards,
Suhas

Similar Messages

  • Swing .............how to undo the changes made by user

    Hi,
    i have created a form in swing asking for the related information from user whose value i m taking in jformetted textfield.
    now i have placed two buttons there.
    one is Apply and second is Cancel.
    when user pressed Apply button all the changes made by the user must be set where as if user clicks cancel button all the changes made by user should be undo to previously set value.
    can anybody help me how this can be done and what code should i write in action performed method
    thanks in advance
    plz reply

    thanx.
    one more thing
    In my application,there is one Button called Option when u clicked on it.It opens up one internal frame where user is asked to asked to fill some parameters.
    1) Now how can i restrict user to create one more internal frame unless first one is closed.
    2) suppose i clicked option button and it opens up internal frame where i can set the parameters and closed it.If i again click on option then i want the parameter to have wht i just set.
    3) and how can pass those parameters value to my main frame from where i m calling internal frame
    Plz reply
    Edited by: neel007 on Mar 11, 2009 8:02 PM

  • How to Track the changes made to the custom table field value

    I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
    Thanks & Regards,
    Kranti

    Hi Satya,
    These are the steps you've to do.
    1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
    2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
    3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
    4. You can keep track of the changes made to the table by monitoring these tables.
    Regards
    Anil Madhavan

  • Report for the changes made in Purchase Order

    Hi Friends,
    In my location, changes are made to the purchase orders as and when required. Is there any report which shows the changes made to the Purchase Orders?? I am aware of the Item changes option in the Purchase Order.
    Thanks in advance..
    Regards,
    Phani

    Hi,
    You have to develope an own ABAP report for this, based on the change tables CDHDR and CDPOS
    CDHDR - Header Change
    CDPOS - Item Change
    EREV - Version Change
    Check the link
    Purchase order change log
    Regards
    KK
    Edited by: Kishore Kumar Galla on Apr 5, 2010 1:16 PM

  • The changes made in the WAD web template is not replicating on web browser

    Hi,
    We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
    If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
    The changes made in the WAD web template is not replicating on web browser result.
    I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
    thanks

    Clear your browser cache also and see if the changes are visible.....
    Arun

  • Error message when I insert a div tag: Couldn't commit the changes made in Live View. Refresh the Live View and try editing again.

    According to a web and support forum search, myself and another person, Chloe in the Dreamweaver Club forum, have ever reported this. Trying to follow along a Lynda.com tutorial, and the instructor isn't getting this error. Can't imagine why it's happening. I'd be very grateful for any help. I'm also getting an error dialog message:
    DIALOG BOX:
    While executing onClick in InsertFGDiv.htm, the following JavaScript error(s) occurred:
    At line 687 of file "Macintosh HD:Applications:Adobe Dreamweaver CC 2014.1:Configuration:Commands:InsertFGElement.js": The object is not currently contained in a document.
    This appears at the top of the screen:
    Couldn't commit the changes made in Live View. Refresh the Live View and try editing again.  [Refresh doesn't do anything.]

    Try the suggestions here -
    Index to Dreamweaver FAQ
    The solution for Javascript errors is likely the one.

  • How to find out the changes made to a photo in numbers rather than in graphs..

    How to find out the changes made to a photo in numbers rather than in graphs..

    We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • How to find out the changes made to the customized table entries

    Hi Team
    i want to know the changes made to the customized table. i have a 'Z' table in my production system, in that table i would like to know whether any table entry is deleted or not. if at all there is any deletion happened, i want to know who had done it.
    So i request you to please let me know the procedure for the same.
    Thanks
    Raj

    Hi Nagaraju,
                       Go to Table Maintenance (SM30)- Display mode-- Utilities-- change Logs. Give the Date range. before giving the date range click on display status , this will show you If the display is active or not. Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • How to check and delete the change logs for DSO

    Hello All,
    I have build a process chain that will delete the change logs for DSO prior to 7 days but when i executed it, the number of entries are still the same within DSO.
    Then i tried deleting directly from "Environment" menu from DSO maintainance but does not work. Can anyone please explain how to resolve this issue or the proper process of deleting the change logs. Appreciated.
    Thanks,
    M

    Hi
    Check out the below two articles
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1058b68f-96c4-2d10-fbb1-de8757ca6a58?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh

  • Tracking the changes made to the custom table  field value

    Hi all,
           can we track the changes made to the custom table field values. if yes..plz specify how it can be done.
    Example: if i changed the  value of field  'NAME' of table 'YYHCUSTOMER'. i would like to know the old value and the new value of the field. For this, I set the flag 'LOG DATA CHANGES' in the technical settings of the table 'YYHCUSTOMER'.

    -> try TA: SCU3
    regards Andreas

  • How to know the changes made to Quotations & Sales orders?

    Hi all
    I want to know how we can have the records of changes and alterations that are made in quotations and Sales orders. For example, once the quotation is created and saved, there must have been many alterations either on pricing or in terms & conditions based on the final negotiations with the customer. Please let me know how do we record the changes.

    Hi,
    what ashish told is exactly correct.You just go to the Environment-changes and execute,it will shows all the changes made for that order like pricing,payment terms etc.
    Regards,
    Hari.

  • How to find the changes made in spro configuration?

    Dear Friends,
    From my client side, some configuration changes were happened directly to production client not by the consultants. How to trace this that what changes have been made through log or table. We found that in spro->utilities->change log is in switched off mode. We came to know that through this log we can find the changes happened or not. Is it so? or is there any other solution to trace it?
    Please advise.
    thanks & regards
    sankar.

    thanks friends for your prompt replies.
    But, as i said clear, the changes made to production client directly and not by any request. How can we detect who has changed the log settings.
    ****Default account assignment configuration was changed.
    Please advise.
    thanks & regards
    Sankar.

  • How to see the changes made in tx code MN05

    Hi all,
    Do you know how can I see the changes made in tx code MN05?
    I need to know when was The output condition updated? Do you have a change record on this change?
    Thanks and regards

    Hi,
    There is a Transaction code SCU3 to display the change logs
    Goto the Transaction code and enter the  Table for MN05 and execute, it will display all the logs for MN05.
    If you didnt find any change logs here, then you have to activate the Change logs for this table.
    To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
    Check whether it was activated or not, if not activate it.
    Thanks,
    santosh

  • How to see the changes made for iPad in iTunes on my iPad?

    How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?

    Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
    Thanks for your help, it works now :-)

  • I keep getting a warnin that my pages document could not be auto saved. The file has been changed by another application. Click save anyway to keep your changes and save the changes made by the other application as a version, or click revert to keep the c

    I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
    What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
    Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.

    I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
    Working with a Retina Macbook Pro and current software
    These are newly created documents

Maybe you are looking for

  • Can I add a faster processor to my mac book pro early 2011

    I am looking to either increase ram or better still if I can afford it, put in a faster processor, my laptop is quite slow....and with more than two programs open, it can sometimes grind to a halt.... thanks

  • MaxL question

    Hi There, I have MaxL to load data into the essbase: import database Finance.Finance data connect as "password" identified by "password" using server rules_file FinanceRule on error write to "d:\\log\\hDataLoad.err" ; It works without any issue. But

  • Oracle 10g/11g - Operating system support info required

    I want to know all the operating systems supported by oracle 10g and 11g. I searched through oracle tech. center, but failed to find this information. I want to know if oracle (10g/11g) is supported on Linux S/390? Thanks Mac

  • Accounting docs in Subcontracting scenario

    Hi All, I want to understand the accounting doumnets created during ME2O and Goods receipt of finsihed product. To which accounts does ME2O transaction and GR hit. Awaiting your inputs here. Thanks, Regards Raghavendra

  • Employee URL PHOTO ?

    Hi Forum I neeed to build a URL string for the photo of the employee, for display in one application portal. How can i know this url..  i have the file name of the photo....  Thnks Josué Cruz