Unemployed idiot has a few misc web page questions.

Please look at my web page.
http://web.mac.com/chg1000
I would like to know.....
-can "slideshow" button be moved?, (its kinda in the middle of everything).
-can page titles be moved? -also, my last page is a different subject, can this text color be changed?
-how to move photos? (the format spreads them too far apart.)
-how to turn off "reflection" on slideshow?
Thank you!

For iLife 09:
Just click on the slideshow - when you see the white squares - you are able to move it just like a text box. Sometimes you have to click outside the main area and click back in.
Titles can be moved just like above - just like a text box in Word.
Just highlight the text you want changed and hit the A button in the editor. Click on the color box and you will usually see a crayon box come up - change the color by clicking the crayon you want.
You can remove reflection and move photos - I am not at my mac now so will have to look later at exact instructions - someone else might jump in before that.

Similar Messages

Has anyone else experienced web pages in Safari being unexpectedly re-directed to knock off MMO ad sites like 'League of Angels'?

As recently as one month ago, I started experiencing a phenomenon where web-pages I was on would randomly be redirected to ad sites for knock-off MMO's. For example, if I had left a tab open to an article on Cracked.com, but was reading a different tab, the Cracked article would re-direct itself to another website. This usually was a minor annoyance, in that I would just have to go back a page in my browser, but this evening I was watching an episode on HBO Go and in the middle of streaming the video the web page abruptly changed to League of Angels. Has anyone else experienced these strange re-directs, or know what is causing them?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Fire Fox 18 has problems correctly rendering web pages.

I am having problems with web pages not displaying correctly or being malformed since I installed Firefox 18. I have not changed any settings.

I downgraded to v 18.0 and so far so good

Code for Embedding Quicktime Movies in Web Pages-Question

I have been embedding QT movies in web pages for years. I used to use the embed and object tags, but due to the problems with the default settings of IE7, in regards to ActiveX, I recently changed to the javascript method.
I will paste sample code below, of how I use it, with the movie title change to sample: (of course I change the dimensions, depending on the movie size.)
<script language="JavaScript" type="text/javascript"></script>
and I put at the top of the page, right before </head>
<script src="AC_QuickTime.js" language="JavaScript" type="text/javascript"></script>
I forgot where I got this code. Perhaps from someone on this forum, or elsewhere. It seems to work with the default settings on most browsers.
I have a couple questions, however, regarding fine-tuning it a little more.
1) If it takes a while for the movie to load, users who open my pages see a static Q QT icon. How would one make the icon flash, with flashing text that says "Loading", so that the user knows that the video is loading? (I have seen that on other sites, and don't know how to do that.)
2)As said the javascript works with most browser default settings, as most have javascript enabled by default. But what if a user does not have javascript enabled? Could the code sense that, and if non-existent, tell the user to enable javascript? Or, if javascript is disabled, could the embed and/or object tags be activated?
3) The code above, that I got from someone, says "cache=false". That means that each time someone sees the movie, it has to be reloaded from the net, and not from the browser cache, correct? If so, why would one want it to be set that way? If it's a large movie, a user with a slower computer and/or internet connection would certainly prefer if it could play from the cache the next time, loading much faster. Is there any reason to prefer "cache=false"?
4)Is there any code that could be put in, to allow the user, if they prefer, to download the file,(perhaps with a right-click or CTRL-Click), instead of playing it in the browser?
Thank you very much in advance, to whomever can help with these code questions.

Thank you for your reply, Kirk,
1)Yes, I do have "fast start" enabled in my files, and they were made with QT Pro, newest version. So no, there is no "trouble with my files".
However, I would still like to have that flashing "Loading" icon when the file is loading, as I see on other sites. (And yes, even with "Fast Start" enabled, depending on the size of the file, the speed of the computer and internet connection, it can take a little time beforeit starts.) Anyone know how to create that flashing "Loading" icon, rather than just the static Q?
2)I just wondered if there was a way for the javascript to recognize if the user does not have javascript, and bring up a message if that is the case, telling the user they need to enable it to see the content. (As would happen if the user does not have the QT plugin installed.) Yes, I realize it would not work to include in the normal way the embed and object tags as well, I wondered if there was a way to invoke them only if the user doesn't have javascript. Perhaps impossible, but I thought I'd ask, in case someone knows of a way to do that.
4)Yes, I guess I could just put a separate direct text link to the movie file for downloading. I just wondered if there was a way to put that in the javascript, so that if someone right-clicks on the QT icon, they can download rather than view it, rather than use a separate link. That may also be impossible, but I thought I'd ask, and see if there is a way to do that.
Your question to me regarding dimensions--I forget which was the QT movie, that I took that sample from. Yes, I have some in unusual sizes. They are not normal movies. I don't have time to explain more now though, and that has no bearing on the questions I asked.
Once again, thanks for replying, and if you or someone else could help further with my questions, I would appreciate it very much.
Have a nice day!

Safari Font has changed on some web pages

The font on my Safari application has changed for some sites including YouTube and Yahoo. Most other sites are unaffected, including Apple's site. The font is hard to read and I cannot figure out how to get it to go back to it's "factory setting" so to speak.
I've tried going to Safari on the status bar. Then to Preferences>Appearance and changed both standard font and fixed-width font to Times at size 16. This has not solved my problem. Default encoding is "Western (Mac OS Roman)
I don't know if it is related, but I recently installed a large pack of fonts to use in Photoshop. The problem started somewhat after that.
Any help or suggestions would be appreciated!

Phil --
Without a uploaded photo of the garbled font,
I would suggest looking for Helvetica Fractions if
the garbled font has some numbers in it.
You may have duplicates of Helvetica, or Helvetica Neue
or Arial. The font you're talking about seems to be a sans serif,
so I would start carefully look at Helvetica and Arial (all subsets, too)
in Font Book.

My firefox has suddenly stopped displaying web pages only instead the full HTLM

My Foxfire 3.6.13 stopped displaying webpages in full HTML and now only displaying them in text. Like for instance, my homepage is set for www.earthlink.com, but instead displaying as a full HTML, Firefox displays as TEXT page. I don't doing anything my Firefox settings to change this; so what do I do to get it back?

The screenshot didn't attach.
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

Using 6.0.2 just updated, Firefox has stopped responding to web page calls from other programs such as Thunderbird. How can I fix this?

running Windows 7, Firefox 6.0.2 and Thunderbird 3.0.2

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Few Hyperion Web Analysis questions

Hi All,
We are using Web Analysis 11.1.2 and i am a newbie to it. I have few questions regarding reports which may be of very basic level;
Q1. If we right click on a report then we have an option of "Edit data" through which we can enter data directly into planning. My question is that how can i disable this option for all users as i don't want them to manipulate any data through a report?
Q2. As we have made a report in which we have used the dimension members that are used in Hyperion planning. The name of member in Hyperion planning for example is ABC and i want to change the name to XYZ in Hyperion Web analysis report. How is that possible?
Thanks in advance.
Regards,

Q1 depends on the level of provisioning and or useraccess permissions on essbase/olap level.
Use Shared Services in combination with EAConsole to restrict this.
Q@. In plain/ native essbase you can add aliases to the member. Normally you do not edit planning members in essbase (since you have to change them in planning it self) But perhaps you can. You can give it a try in a testenvironment.

Safari won't load web pages while firefox has no problem

Started having problems yesterday and couldn't load any web pages with Safari or get mail. I thought the internet connection was down (it had been down), but the phone gets access via the same home wireless network, and Firefox has no problem loading web pages. Even more bizzare is that the same issue is happening on the iMac and the Macbook: both cannot get mail with Mac Mail or load web pages with Safari, but can with Firefox. This problem seems to correlate with an internet outage - everything worked until the outage, but then didn't work when the internet was back up.

Oh. Another weird thing. When I restart Safari, I can actually load one page. Just the front tab that was open when Safari closed. So odd. I did disable and re-enable DNS prefetching also to no avail also.

Stratosphere will not hold web page in memory

I have looked at a few topics, but nothing seems to be quite on the money with the problem that I have, unless I have missed it. I am a service technician and I receive calls for service through a simple webpage. The page will show the customer and a phone number and other information. When I click on the phone number to switch apps to the phone and call the person, the phone will automatically take me back to the web app which is great. The problem is, it always has to reload the web page. And while that wouldn't be so bad, the biggest problem is that it loads one from history. I am usually sent back to a call I have already completed and I have to refresh the page, or log out and back in to the website.
This is very frustrating as low signal areas take quite a while to load even a simple web page. Is there any way to make the web browser dominant over other apps and have it keep its memory rather than the need to reload a web page from the history? I've tried clearing cookies and history but unless I do that after EVERY call it will take me back to a dead page rather than where I just was.

Sometimes it could be a coding issue.. Try clearing cache and cookies.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Open web pages from an applet

I'm developing an applet that has to open some web pages.
The only way I know is to use the method showDocument that
needs and URL. So, how to pass parameters to the web page?
I don't want to put them in the URL: everyone can see
"secret data"!
Help me, please.

Take a look at this example that uses a JEditor pane to hold the HTML page.
//Create a new JEditor Pane
jep = new JEditorPane( );
//Ensure the pane is not editable
jep.setEditable(false);
//Use this to get local HTML file
URL fileURL = this.getClass().getResource("Manual/Manual.htm");
//add the html page to the JEditorPane
jep.setPage(fileURL);Ok the core line of code here is this.
URL fileURL = this.getClass().getResource("Manual/Manual.htm");The standard method for accessing a html file via a URL is thus. As you can see its very similar.
URL fileURL = new URL("http://www.comp.glam.ac.uk/pages/staff/asscott/progranimate/docs/Manual/Manual.htm");this.getClass().getResourse() will return the file location of the class you are working with.
By doing the following you can access manual.html in a folder called Manual that sits in the same file location as the class file you are using.
URL fileURL = this.getClass().getResource("Manual/Manual.htm");I hope this helps.
Andrew.

Have been using firefox for years but now having many problems two days ago could not acess any web pages without a firefox message saying page could not be ver

Went on the internet on Friday but a box appeared saying firefox could not verify web page and somebody could be trying to impersinate the web page this was my home page it gave me two options the first was get me out of here or that I understood the risks and to continue I clicked the latter and my home page came up this box continued to appear on each occasion I tried to acess any web pages but when I tried to acess Facebook the box only gave me the option of get me out of here it also did this when I tried to acess Mozilla Firefox to see whether there was a problem with the browser I tried to reinstall the browser but the problem persisted I finally got round the problem by reinstalling my computer to an earlier time before I did this I also have the option for Google chrome on my computer and this browser worked fine Facebook etc I prefere Firefox but although the warning box hasn't materialised since I reset my computer Firefox has become unstable where it has frozen on a web page and the only way I can get out is to start the task manager and end the programme even though the task manager is saying that the page is still working correctly but after I have ended the running of the programme it will not reload the firefox browser but again google chrome is fine I have to restart the computer to fix this problem any ideas thanks.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details" to expand this section.
If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the <b>issuer of the certificate</b>.
You can see more Details like intermediate certificates that are used in the Details pane.
If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

Help! Safari won't fully load web pages until I refresh! Why and any suggestions on how to retify this??

For several months now safari has not been loading web pages properly (not them all, it is a bit random, but maybe every 3rd or 4th page I open?). The blue loading bar gets to about 1.5 inches from the end and stops. I can then click on the bar and refresh and it loads no problems but this is highly inconvenient and I can't seem to fix it.
I have reset safari, updated all software, I am on a mac book pro, I have Version 5.1.5 safari.
Would this be an internet problem rather than a software problem? How would I check.
It's not very convenient when you're doing something important like trying to get tickets for an event and then it jams, and you know you need to refresh but if you refresh you've lost the tickets...
Any suggestions welcome

Hi Krisztina ..
Using OpenDNS can help when pages won't load properly.
Use OpenDNS for better speed, more security, includes anti phishing filters, prevents browser redirects, blocks the flashback trojan, and it's free.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
Apple suggests using OpenDNS here > Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

MY page up and down key does not what its suppose to do but now instead it goes forward or back a web page

Seems like since I installed the new Firefox my Page up and down key has stopped making my web pages go down or up but instead the page up key makes the web page go forward in history and the page down key makes it go back a webpage.

" Is there anyway the apple or my service provider can help me with this? "
No.
"What is the point of the app if it only works when the phone is on? "
The pont is to assist with locating a lost iphone.
"Then it is only usefull within those first couple of days."
Correct. How would any device be tracked if it had no power?
Very sorry for your situation, but there is nothing to do.
Report it to the police and change your passwords.

Fireox became excruciatingly slow to load web pages immediately after following Stop Censorship link over Firefox logo on start page.

Immediately after I followed the Stop Censorship link on the Firefox opening page and e-mailed congressional representatives, Firefox has become extremely glitchy - web pages take forever to load. I had upgraded to Firefox 8 two days ago. Could this be a virus/worm set by pro-censorship or anti-open source agencies like ?Microsoft or is this a problem with the beta version of Firefox 8? I did not notice the extreme slowing of web page loading after upgrading to Firefox 8, but it happened directly after I followed and acted on the Stop Internet Censorship links. My Norton internet security scans shows "no threats detected". Also I am unable to submit this feedback to Firefox: When I click on the Submit Feedback button, nothing happens. What to do? Should I go back to 3.6 or what to do next? Any other Firefox community members have this problem?

SOLVED
I cannot quite fathom why this solution works (since browsing seemed slower without Sophos installed) but with Sophos 9 installed and turning off the new functionality in Sophos 9: Web protection / Block malicious downloads... the browsing experience is again very fast with the exception of netspeed.test.

Unemployed idiot has a few misc web page questions.

Similar Messages

Maybe you are looking for