Uneven audio channels

The audio in the timeline is uneven. If I isolate the channel are there any adjustments I can make to improve the sound? I know sound is the worst thing to be trying to fix. But any advice would be great. Thanks.

Or use the Compressor / Limiter filter ( Effects > Audio Filters > Final Cut Pro )
http://www.geniusdv.com/weblog/archives/compressor_limiter_with_final_cut_pro_to _fix_audio.php
The AUMultibandCompressor filter ( Effects > Audio Filters > Apple ) gives you the same controls but more so (allows you to apply the differing amounts of compression to differing frequency ranges).
Theres also "The Levelator" : http://www.conversationsnetwork.org/levelator

Similar Messages

Get 4 audio channels out through SDI whit BlackMagic UltraStudio Express

Hi,
We have some issues with the Blackmagic UltraStudio Express and Premiere Pro.
We need to get out 4 audio channels through SDI for different broadcast and news feeds. We can't do that with the UltraStudio Express on different Mac Book Pro (one on OS 10.9 and one on 10.8.5) with Premiere pro CC and Premiere pro CS6. (We have try with the driver 9.9.3 and 9.6.8). The only thing we manage to monitor out of the UltraStudio is 2 audio channels.
We know it "could" work as :
- We are able with the same setup to get 4 audio channels via FCP 7.0
- We are able with a Mac Pro OS10.8.5 + Blackmagic Decklink HD Extreme 2 (driver 9.6.8) to get 4 audio channels with Adobe Premiere CC
Do you have maybe a solution for this ?
Have a nice day !
Best regards
Yann-David Urbanowicz

You might ask in the Premiere Pro forum http://forums.adobe.com/community/premiere?view=discussions

My ipod's music quality is inferior. It doesnt have the surround sound/ left and right audio channel unlike my brothers ipod? is there a problem with the chip?

I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar or contact an apple specialist through phone because of my work schedule and work load. I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.

I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
Phil

How do I export from FCP to a QuickTime file with multiple audio channels?

I'm delivering a project where the first step is to generate an HD Cam SR master, which I will be doing at a post-production lab. They will then do a QC check for me. To generate this HD Cam SR master, they need to me to bring in my 98-minute long movie on a firewire hard drive, in five equal parts -- QuickTime files. From these five QT files, the lab will then be creating an HD Cam SR master that will have...
dialogue on tracks 1 and 2
effects on tracks 3 and 4
music on tracks 5 and 6
MY QUESTION
a) I don't see any way to separate these audio tracks accordingly in the FCP menu for QuickTime export. Does anyone have any experience doing this?
b) And does anyone know the most efficient way to combine timeline audio tracks for this purpose? I have my dialogue sitting on the first FOUR audio tracks, actually. To deliver this film, I'll need to crush these four audio tracks to two, as listed above. I could generate an AIFF file, I suppose, import it back onto the timeline, sync it up, and then re-export along with the visuals to make the final QT file, but this seems like a generation loss.
thanks,
Shanked
PS the movie is made up of footage from a Sony PMW EX1. I used the codec "XDCAM 1080 24p 35mbs VBR" for editing in FCP. I'll either export to QT using this same codec or switch to "Apple ProRes" if my machine can somehow maintain the sync.

The following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

Help using multiple audio channels for one video

Hi,
I have a video file with 3 audio files (stereo (.wav), 5.1 surround (.AC3), and commentary (.wav).
I have placed these on the time line of the video track, but now I need to have buttons to target each of them from a menu. However, when is choose a buttons target, is doesn't give me the option of which audio channel to play (A1/A2/A3 etc).
Is this possible with just one track, or do I need 3 (each with a different audio file as A1)?
Hope you can help! cheers.
Tim

There is a tutorial on setting this up here;
http://www.kenstone.net/fcphomepage/dvd_languagenattress.html
BTW I would very strongly suggest to compress your WAV files to stereo AC3 files. It will reduce your overall bandwidth, and you will have a disc that will less problems in playing.
http://www.kenstone.net/fcphomepage/a_packwarmouth.html

Feature Request: Modify Audio Channels from the Timeline in Premiere CC.1

Why have we never been able to modify audio channels once a clip is added to a sequence? I'm guessing there's a good reason Adobe has never had this feature. The lack of this feature is explicitly mentioned a few times in the audio section of the Premiere Pro CC manual, as if it's a benefit NOT to have it. But the benefit is entirely lost on me.
In my workflow, I synchronize my double-system video and audio before anything else. I do this in PluralEyes (and unfortunately I'll have to keep doing it this way, until PPr's sync on sound feature gets fixed—for me it's never worked).
Once PluralEyes has synched hours of footage and audio and placed it on a PLURALEYES GENERATED sequence, I import that sequence into Premiere. Note: Since I haven't gone through the step of creating a blank New Sequence, I don't get the opportunity to setup my audio channels the way I'd like in my sequence (i.e. Stereo recordings should occupy ONE track, not two. Typically these tracks come from a camcorder and are used for reference sound, or ambient noise at best, so I don't need them taking up precious real estate in my sequence).
Since PluralEyes doesn't merge my clips for me (or rather I don't want it to since I'm usually doing multi-cam sequences where I want to keep all 14, or so, tracks of audio), I have to go through the clips one by one and do a Merge Clip action once I've adjusted any minor sync issues, or determined which tracks I actually want to keep. But, and here's the key, at this stage I'm not yet 100% certain whether I'll use the nat sound or the wireless mic sound (separate audio recorder, etc). Furthermore, I don't really want to think about that at this point. After I've spent a few mind-numbing hours just ingesting files, sync and merges, I want to jump into the edit as soon as possible, before I lose all will to finish this edit. If I modify my audio channels right now, I'll lose the ability to make some creative decisions later on.
I'd like to start whacking out an assembly edit. And then after I have a rough program, I can start looking at which audio tracks (nat or double-system) I like better in each circumstance. This is where I become stumped that at this stage, I'm locked into whatever audio channels I've setup (or not) in the earliest stage of the edit, back before any media was actually on the timeline! It's at this stage, and usually only at this stage that I want to start Modifying Channels—FROM THE TIMELINE!
Does anyone else feel the same? If not, what is your workflow?
Feature Summary: Right-click on any clip, (master clip, sub-clip, merged, nested or otherwise) in the timeline and choose Modify > Audio Channels.
I've submitted a feature request, with a link back to this discussion, so please pipe in—especially if you want this feature.

Maybe its your specific workflow, asset mangement and use of a 3rd party application that runs you into an issue.
Take Pluraleyes out of the equation, I would imagine my workflow is the same as most everyone else. Find footage in the Media Browser. Import it. Create a Sequence and start editing. Use the Source Monitor to set Ins and Outs and then Insert the clip on the timeline.
At this point, if the audio needs to be modified, it cannot be done on the Timeline. The workaround, of course, is to Find Clip in Project; Modify Audio in the Project panel; then do a Matchframe to replace the audio clip. This works, but requires many steps per clip. Also, Matchframe in Premiere Pro CC is not reliable.
Introducing a new Modify Audio (from Timeline) feature as seen in the fantasy screenshot above would solve it.
I dont use Pluraleyse ...which I understand to be a synching aid...so I dont know the workflow it imposes on one .
Returning to Pluraleyes workflow, this issue is compounded by the need to Modify almost ALL audio. Every stereo track is separated and placed on two MONO tracks taking up precious real estate. This is not something Pluraleyes imposes. It is due to the way Premiere imports XML timelines. This would apply to sequences imported from Final Cut as well.
In this case it would be ideal to select both the LEFT and RIGHT mono tracks and choose "Modify > Audio Channels > Merge L/R Mono to a Single Stereo track." Ideal? No. I guess Ideal would be if Premiere would interpret XML files properly in the first place.
What actually is the issue with Premieres synch and merge workflow in your case?
Audio Sync in Premiere Pro doesn't work. Period.

How do I reduce the number of audio channels in the source or export settings?

I'. trying to export my finished edit through the "movie" setting but keep getting the message that the number of audio channels to create in the exported file must be equal to, or less than the number of channels in the source. Reduce the number of audio channels in the source. Reduce the number of audio channels in the export settings. I am at a loss as to what this means and how I proceed with it prior to putting it to DVD. Please advise.
JWooley

What is your source, sequence settings and export setting. Which version of PP?
Prefebly a screendump of the export settings box.
(e.g. trying to export a mono track to 5.1)

While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

Hey,
I am using video clips from sony digital hi8 camera and trying to import video clips (.mov) 720*480 fps 29.97 .But unable to get into premiere pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
Manoj

I too am getting this error in Premiere CS5. I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere. I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it. However, upon closer inspection only 2 channels had a waveform. I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels."
Any ideas?

How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

I have premier
elements 12
How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

timc
I do not see a way to separate audio channels to edit them separately in Premiere Elements (any version).
Premiere Elements does have audio effects including Balance, Fill Right/Fill Left, and Swap channels, but that is not what you are seeking.
I would refer you to an audio editor such as the free Audacity for what you want to do.
Splitting and Joining Stereo Tracks - Audacity Manual
I am not sure if this is close to what you seek
https://forums.creativecow.net/thread/3/883383
But, the opportunity seems to be in Premiere Pro, not Premiere Elements
Please review and consider and then let me your thinking on the matter relating to your Premiere Elements 12 (what operating system).
Thanks.
ATR

How can I get 2 Mono Audio Channels in, 2 Identical Mono Channels Out?

I use Premiere CS6. Most of my work requires simply editing with one audio track used for the on-camera talent's microphone, adding another track for music, and then outputting BOTH of those tracks to the right channel as a mixed mono output AND the same for the left channel (an identical mixed mono output).
Otherwise, I have had problems in the past based on a user's particular playback settings/hardware/etc., and they may only be able to hear one channel or the other (only hearing voice or music). If I can put a mono mix on the right and a mono mix on the left, then I am covered.
SO HERE'S THE QUESTION: What settings do I need to adjust to accomplish this, and how do I set this up as a default for future projects? (I realize that Premiere CS6 has a lot of flexibility when it comes to controlling audio, however, I have read several help articles, and cannot find the answer to this simple question.)

You're overthinking this. A normal stereo mix with the tracks centered will do the trick. There are several ways to center the audio. Option 3 is probably the most efficient.
http://www.larryjordan.biz/premiere-pro-cs6-isolate-audio-channels/

How do I select just one audio channel in Final Cut Pro X?

I know this has been asked and answered somewehre... and I'm pretty sure the answer is simple. But I don't have hour's to search the net.
And the FCPX "Help" feature just ****** me off....
I recorded voice on channel 2 and shotgun nat.sound on channel 1.
I only want the voice track (channel 2) to playback in stereo.
I have already edited the video so I don't want to re-import the raw video to seperate out just the channel 2 voice track.
How do I select just one audio channel in the timeline, then pan it so it plays back in both the L and R channel?
Also, some of the audio was recorded with a air conditioner running in the background. Any suggestions on best audio filers to remove or lessen it?
Thanks, Barry

I think you want to select the clip in the Timeline, choose the Inspector and then Audio, dual mono.
You can even do this by selecting multiple clips.
In the Event Browser as well.

Stereo Audio channel turns to mono when I close and re-open the project

Hi there,
when I import a random video file with stereo audio channels and put it to the timeline (after peaking), everything works allright - the recording level window shows me the left and the right audio channel.
But when I save and close the project in order to re-open it directly, I only got a mono audio channel (left) and the stereo is away in my timeline and recording level window. The preview of the imported video ist still ok with stereo sound.
Is this a bug ? What can do? Please help me.
Thanks a lot

Are you clearing your recent history either manually or when you close Firefox?
Firefox stores App Tabs and tab group details in the same file that stores details of browsing sessions. Make sure that you have not set Firefox to delete browsing history. For details of the setting to check see https://support.mozilla.com/kb/Clear+Recent+History

Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

Hey Volks,
when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
im very thankful for any idea...

Hi Dast Media,
Have you resolve the multi channel export?
I have the same problem...(the export it's ok but i hear only the first two tracks)
i need to export a MXF file with 8 tracks, 6 stereo and 2 mono.
Thank you for help!

Something's wrong with my imported AVCHD audio channels

I've recently purchased a Panasonic HDC-SD1 camcorder.
I'm glad that iMovie 08 is capable of importing those AVC videos and perform editing on it. (even though it consumes gigabytes of space for a video of just a few minutes)
I've discovered a problem with the audio channels.
I have audio of right channel obviously louder than my left channel.
I've confimed that the machine is working properly, as I've tried to play back the source file in a PC.
How do I get it working again?

I think i should keep all of you updated, in case any one of you are looking for answers in search engines, and found this thread.
The mentioned problem is basically solved with the latest software update released by Apple. You can get the update through "Software Updates" from the Mac OS drop down menu.
This update solves the audio balance, which has been tested and verified by myself, though it brings up another problem of previewing videos to be imported.
Video preview now plays back in mono mode (on right channel). But that should be no big deal and i think should not be discussed in this thread.
good luck to you all, and have fun with your AVCHD video cam.
Message was edited by: burnduck
Message was edited by: burnduck

Timecode on Audio channel

Hi,
Sorry if I sound dumb but can I print timecode on one side of the audio channel? like SMPTE?
For exampel one mono channel music and time code on the other channel. Any idea?
Thanks

Well I don't know about the midi solution. YOu can try. Only way I know you need a capture card.
Shane

Uneven audio channels

Similar Messages

Maybe you are looking for