Uneven distribution of memory in the blades even after reorg

Hello:
We have 3 blades in our BI-A system, and we see that one of the blades is always consuming almost twice the memory of the other 2 blades. We have tried reorg without any success. 
Any suggestions on how to fix this issue?
Thanks,
Bindu

Hello Vitaliy:
Thanks for your reply.  We do have a stand-alone TREX admin tool on blades, but we couldn’t find the interactive graph you have mentioned, to move them with our mouse. Is it possible for you to give us the path in the TREX Admin to find the graphs?
But we did find in Index > Landscape, we could right click and move the master indexes between the blades.
This seems to help, but again we think that the “Total memory used” in the Hosts > Memory tab is not showing the correct number. It is still showing that one blade is almost double the other 2 blades.
We check the Reorg>usage by service(1), and see that all the blades show equal usage. Does this mean the Hosts > Memory tab is not showing the correct values?
Thanks,
Bindu

Similar Messages

  • Problem: Video on slide one continues to play and can be heard in the background, even after the user has navigated to another slide.

    Problem: Video on slide one continues to play in the background, even after user has navigated to another slide.  This only happens on a fresh reload of the page.
    Has anyone else had this problem, or found a solution?
    If you refresh the page and start over, the problem doesn't happen.  But on the first page load it always seems to happen.
    Here is a link to the module I am working with.  If you let the video play for a couple seconds on the first slide, and then click a navigation link to another slide, you will still hear the audio from the first slide playing.
    http://www.thepettitgroup.com/tn/module_01_unit_01A/multiscreen.html

    To clarify - this happens in both IE and Chrome, and is the Flash version of the content.

  • I was asked to download the iOS on my ipad3 which then completed automatically but instead iTune with a plug-in icon came on the screen. SInce then I can't operate the ipad even after I switch it off and on again. The icon just monopolize the screen.

    I was asked to download iOS on my ipad3 which the completed automatically but instead iTune with a plug-in icon came up on the screen. SInce then I can't operate the ipad3 even after I switch off and on again. That icon just monopolize the screen ! What shall I do now? Please help.

    Try and put your iPad in recovery mode
    http://support.apple.com/kb/ht1808

  • Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded.  I just ran the update and it is still not fixed.  What can I do???

    Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded.  I just ran the update and it is still not fixed.  What can I do???  My plug are asking me to re-register them too.  This is annoying.  Please help!!!!!

    How do you try to start the repair dialogue? By starting Aperture or by opening the Library?
    If you not already have tried it with directly opening the library: 
    reveal your Aperture Library in the Finder
    Whilst holding down Command(⌘)- option (⌥) double click on the Aperture Library.
    Select "repair library" from the dialogue.
    What about Frank Caggiano's questions above?
    It would be really helpful to know, how many libraries you have, and if this problem is restricted to one of them.

  • My iPad3 is freezed because the iCloud notification stays on the screen even after I touched the OK button.

    My iPad3 is freezed because the iCloud notification stays on the screen even after I touched the OK button.

    Hold Home and Sleep buttons and the iPad will restart

  • I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up. I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest. any suggestions

    I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up.
    I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest.
    any suggestions?

    weird.
    It's so frustrating, I got my Mac Book 5 days ago and I'm already having a discussion in the forum.
    Thank you so much for your prompt replies.
    It's past midnight here so I'd better get some rest...
    Good night captfred!

  • TS1373 my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I

    my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I do?  it also makes a lot of noise while connected to the computer.

    Is the camera damaged? Could be a hardware problem.
    Try:
    Close the Camera app in the multitasking bar, then try again.
    Restart/Reset/Restore your iPod. In that order.

  • I can't open the app even after reinstalation !

    As I said previously, I can't open it even after switched off the iPad, restarted the app and redownloaded it...
    When I launch it, a grey screen appears and then the app crash ...
    Help me please !

    The problems mostly happen when I am using X-Y compare in Library mode. It shows black rectancles over the tops of the sections that contain the photos and these flash. They aren't always the same size, but are only on the top of the section - never big enough to completely cover the photos. Then I get anywhere from one to about four or five extra windows stacked on top of the Lightroom Icon at the bottom of my screen (I use Windows 8) opening and closing, though there isn't enough time for me to click on them and read them because my computer gets so slow that my mouse actin is delayed by a few seconds. And, to shut Lightroom down, I need to use Windows task manager because clicking on the little red box with the X in the upper right corner accomplishes nothing. I have a new Sony Vaio i5 chip and 8Gb RAM. This also hapened on my old computer, though not as often

  • HT4864 I am still having difficulty receiving mail in the cloud, even after system support says all is normal.  anyone else experiencing this?

    Still having difficulty accessing incoming e-mail in iCloud, even after systemsupport says all is normal.

    System Status is currently showing slow or unavailable mail for some users:
    http://www.apple.com/support/icloud/systemstatus/

  • Firefox will not complete the installation even after several attempts of rebooting the computer.

    I downloaded the Firefox 9.0.1 upgrade but it will not complete the installation on my computer. Everytime I try to remove the program, it tells me to reboot the computer to finish the installation. After several reboots, the same error keeps coming up.

    Try to run the Firefox program once as Administrator (right-click firefox.exe: Run as Administrator).
    If that doesn't solve the problem then remove the Firefox program folder (C:\Program Files\Mozilla Firefox\) to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Firefox can't connect to the internet even after trying all solutions from firefox support.

    Since Firefox added a pluging or update, every time I open Firefox, it gives me an error message that says unable to connect. I have tried everything in the Firefox support page and, the problem has not been solved. I am currently using IE and, it's working fine.

    You didn't specifically mention what you have tried or which support articles you have read. The largest problem after a Firefox program update is a Firewall blocking the updated Firefox executable. <br />
    See the instructions for the Firewall in use on your PC. <br />
    http://support.mozilla.com/en-US/kb/Firewalls

  • SQL server 2012 Ent using less memory than the allocated amount after enabling -T834

    I am facing the situation mentioned here.
    http://blogs.msdn.com/b/psssql/archive/2009/06/05/sql-server-and-large-pages-explained.aspx
    My SQL Server 2012 is not able to use all the 112 GB RAM that was allocated to it after enabling -T834.
    This was not the case earlier. Now I see the Total server memory and target server memory counters are just 27 GB constantly. I found the below error while starting SQL after enabling -T834. I restarted services again and this time it started fine. But I
    didnt bother about the error untill users complained slowness and SQL memory usage was found to be low.
     Detected 131068 MB of RAM. This is an informational message; no user action is required.
     Using large pages in the memory manager.
     Large Page Allocated: 32MB
     Large page allocation failed during memory manager initialization
     Failed to initialize the memory manager
     Failed allocate pages: FAIL_PAGE_ALLOCATION 2
     Error: 17138, Severity: 16, State: 1.
     Unable to allocate enough memory to start 'SQL OS Boot'. Reduce non-essential memory load or increase system memory.
    Now, SQL is started by its Total server memory is only 27 GB. How can I make SQL server use all the allocated max server memory with -T834 still on ?
    Bharath Kumar ------------- Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker

    Hi Bharath , 
    in the below post the scenario is mentioned clearly 
    http://blogs.msdn.com/b/psssql/archive/2009/06/05/sql-server-and-large-pages-explained.aspx
    Unable to allocate enough memory to start 'SQL OS Boot'. Reduce non-essential memory load or increase system memory.
    This shows one of the problems with large pages: the memory size requested must be contiguous. This is called out very nicely at the MSDN
    article on Large Pages
    These memory regions may be difficult to obtain after the system has been running for a long time because the space for each large page must be contiguous, but the memory may have become fragmented. This is an expensive operation;
    therefore, applications should avoid making repeated large page allocations and allocate them all one time at startup instead.
    In this case above, even if ‘max server memory’ was set to say 8Gb, the server could only allocate 2Gb and that now becomes a maximum allocation for the buffer pool. Remember we don’t grow the buffer pool when using large pages so whatever memory we allocate
    at startup is the max you get.
    The other interesting thing you will find out with large pages is a possible slowdown in server startup time. Notice in the ERRORLOG entry above the gap of 7 minutes between the server discovering trace flag 834 was on (the "Using large pages..” message)
    and the message about how much large memory was allocated for the buffer pool. Not only does it take a long time to call VirtualAlloc() but in the case where we cannot allocate total physical memory or ‘max server memory” we attempt to allocate lower values
    several times before either finding one that works or failing to start. We have had some customers report the time to start the server when using trace flag 834 was over 30 minutes.
    regards,
    Ram
    ramakrishna

  • How do you update apps that where purchased using different iTunes accounts?  I get a cannot connect to iTunes message and it won't accept the password even after you change it.

    Both my iPad and iPhone have the same problem.  I have purchased apps with three different accounts. I understand I will need to use the original acct to do the update but every time it asks for the password I put it in and get a message that I cannot connect to iTunes store. I have even had the password reset and it still will not connect on the upgrade.  But I can sign in with that account and purchase new apps i am loading a free one now just to make sure. So what is that about?  Please do not tell me I have to also use the original password!  We have reset them so many times that there is no way to remember the original one used at time of purchase a year and 1/2 ago.  Please help. I have also upgraded to the iCloud thinking this would solve the problem but it still exists.

    I use only one Apple ID and only one ID. I did have to change the password at one point but I had no issues at all with updating apps after I changed the password.
    If you can download new apps with the ID that you changed the password for, I would think that you will be able to update apps associated with that ID as well.
    Did you try restarting the iPad after signing out of the one account and then sign in to the other account/accounts?

  • Firefox 4.0 will not open at all. It shows that the process is running in the task manager but will not open the window even after closing the prcess and restarting.

    I have had firefox since an earlier 2. version and have been able to upgrade as normal. After the installation is done it will not open at all. I have restarted and even uninstalled all previous version .exe and still nothing. I am using windows 7 OS. I am still running 3.6.8 and would love to see the new one running on my laptop.

    hello, this crash is caused by Websense Endpoint security software that is running on the system. please try to install all the updates for this program that are available...

  • PROBLEM! 1st I synced my iphone to Mac, then deleted photos to make some space, I think I deleted everything from icloud too! Please tell me there is a genius there who can fix this! is there a way to retrieve the photos even after deleted from icloud.

    Hi, I know this is stupid, but without going into the how, I deleted important photos and actually backed up my icloud, so I think they are gone completely! I am furious with my self, is there anyway to retrieve this data from some space even if I have to be charged by apple ... just being hopeful...

    Photo stream photos are not backed up, and when you delete them from one device, they are also deleted from iCloud and your other devices.  If they were in your camera roll when you last back up you device, restoring the backup should recover them.  Otherwise, they are, unfortunately, gone.
    Also, photo stream photos don't use any of your iCloud storage so deleting them won't free any storage up in your account.
    You can't really use iCloud to back up your photos.  It's designed to stream them to your devices and share with others, not to back them up.  In fact, photo stream photos only remain in iCloud for 30 days.  In order to back up your photos, import them to your computer while they are still in your camera roll, as explained here: http://support.apple.com/kb/HT4083.  Or, if you have a Mac that is signed into your account with photo stream enabled, and you are using iPhoto '11 9.2.2 or later, go to iPhoto>Preferences>iCloud and check Automatic Import.  This will ensure that your photo stream photos are automatically imported to your iPhoto library where they will be safe (especially if you are using Time Machine to back up your Mac).

Maybe you are looking for