"Unexpected catalog error" in LR 5
LR 5, not 5.2, is giving me "Unexpected error opening catalog" with the suggestion I attempt to open another catalog. All my recent catalogs give me this error.
I'm using Windows 7 with fully adequate ram and storage. The program was working OK until today.
I back up daily and that always includes optimization. I did find an earlier catalog that comes in successfully.
Advice anyone?
The Lightroom program demands lots of hours of study and work and if errors like this are frequent I'll have to reconsider its usefulness for my photography.
Yes, previously I had done a good bit of work in LR5 and the catalog behaved OK. It was upgraded to 5. The catalogs have about 20,000 images. I have rebooted with no evident change.
I did notice that in the upgrade process, some pictures (about 200) were missing and had to be reimported. When imported they showed processing edits but no history. Kind of strange but I've accepted it.
Now I've found earlier backup copies that open in LR5 so I'm proceeding to use the program successfully. I don't think any work was lost. But my latest catalogs failed. This tells me to make lots of backups, belts and suspenders, to avoid disaster. I truly want to make Lightroom work successfully since I can see its virtues despite this unnerving incident.
Thanks for your counsel.
Similar Messages
-
Finder Unexpectedly quit error message when rebuilding desktop in 9
When I try to rebuild the desktop, I am still getting the Finder Unexpectedly Quit error. This is happening with my iMac G3. I'm running OS 9.2.2 and 10.4.3. I followed all the directions in the Apple Help file here:
http://support.apple.com/kb/HT2344
but it is not rebuilding the desktop at all. Every time I do I get that error message at startup even with extensions off. Is something wrong with my computer?Nevermind. I figured out the solution. I ran Disk First Aid and it showed a lot of catalog problems so I just clicked Repair. When I tried to rebuild the desktop again, it worked. But if anyone else gets this error they can look at this thread.
-
AS2 Receiver Error: MIC not verified # unexpected-processing-error
When sending out a test message using Seeburger AS2 receiver channel I get the following error:
MIC not verified # unexpected-processing-error
So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
Do you have any idea on this?Hi ,
I have been facing this error and tried all the refresh and reimporting of certificate.
"MIC not verified # unexpected-processing-error"
could you be bit specific how to fix this ?
thanks in advance
Praveen -
Can not upgrade. "unexpected system error" [SOLVED]
I seem to have trouble upgrading and synchronizing the databases. I get this output when attempting 'pacman -Syu' and 'pacman -Syy':
:: Synchronizing package databases...
error: failed to update testing (unexpected system error)-----------------] 0%
error: failed to update core (unexpected system error)--------------------] 0%
error: failed to update extra (unexpected system error)-------------------] 0%
error: failed to update community (unexpected system error)---------------] 0%
archlinuxfr 25.0K 60.7K/s 00:00:00 [#####################] 100%
compiz-fusion 3.6K 26.0K/s 00:00:00 [#####################] 100%
I have tried searching for a solution here but it seems that no one else is experiencing this issue (unless I over looked a post). I see nothing about this in the news section of the home page so it might not be a common issue.
This is what my pacman.conf file looks like:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
[testing]
Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/i686
[compiz-fusion]
Server = http://compiz.dreamz-box.de/i686
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Is there a log file I can check to see what happened exactly or is there something that can be done for me to sync the databases again. Any help is appreciated.
Last edited by vytalelementz (2008-10-13 13:45:48)Here is my mirrorlist:
# Arch Linux repository mirrorlist
# North America
# - United States
#Server = ftp://ftp.archlinux.org/$repo/os/i686
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
Server = http://archlinux.unixheads.org/$repo/os/i686
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
Server = http://mirror.neotuli.net/arch/$repo/os/i686
Server = http://mirror.rit.edu/archlinux/$repo/os/i686
Server = http://mirror.umoss.org/archlinux/$repo/os/i686
Server = http://schlunix.org/archlinux/$repo/os/i686
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
# South America
# - Brazil
Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# Europe
# - Austria
Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
# - Belgium
Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Estonia
Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
Server = http://mir.archlinux.fr/$repo/os/i686
Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.rez-gif.supelec.fr/Linux/archlinux/$repo/os/i686
# - Germany
Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
# - Great Britain
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
# - Greece
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Ireland
Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
# - Italy
Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
# - Norway
Server = http://arch.likbilen.com/$repo/os/@carch
# - Poland
Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = http://unix.net.pl/archlinux.org/$repo/os/i686
# - Portugal
Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
# - Russia
Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
Server = http://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
Server = http://server.elsistech.com/archlinux/$repo/os/i686
# - Ukraine
Server = ftp://hell.org.ua/archlinux/$repo/os/i686
Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
# Asia
# - Israel
Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# - Vietnam
# Domain name is ftp.indochinalinux.com but there are frequent DNS problems
Server = ftp://202.78.230.5/archlinux/$repo/os/i686
# Australia
Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686 -
I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.
Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave -
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders -
Lightroom wont open due to catalog error
I have been trying to open lightroom but I keep getting a catalog error and I read all of the forums to help my problem but I just dont understand how to fix it. I have uninstalled and installed almost three times and it still hasnt fixed it. I was learning how to use lightroom then I was just seeing what a catalog was I guess I did something wrong and i got the error. it says cant open dadsfamilypictures 101.jpg.ircat it was a whole file of pictures. Can someone fix this for me! I dont know how to get it to work. Thank you!
Yes that worked I just had to rename the prefreneces! Thank you that was alot easier than looking at half of the stuff on here. I can now use it after ive been trying to figure this out before christmas! Thank you!
-
Creative Cloud is experiencing unexpected server errors...
Anyone else getting this message when accessing files on the website?
This section of Creative Cloud is experiencing unexpected server errors.
We're working quickly to resolve the issue and we're sorry for the delay. Please check back or see our status site for updates. Also, help is available in the Creative Cloud forums.
Thanks for your patience!
This is my first day of switching from Dropbox for file management, so it figures there world be some issue or another... anyone know how long will this be a problem for?I hadn't used it in the past day or so. However...I updated earlier today to Mavericks 10.9.4 on my iMac. After rebooting I found that my Desktop creative Cloud application used for downloading programs and updates will no longer sign in. It looks like it is trying but the little progress wheel for the application just spins..not the Mac pinwheel but the spinning indicator in the CC application. Thinking maybe something got hosed somewhere I uninstalled the application and am having the same problem with a fresh install. I was thinking that perhaps it wasn't compatible with OS X 10.9.4 but now I am thinking it may be Adobe after seeing some other posts about problems with the service. I did make a clone of my system before I updated Mac OS X just in case.
-
SQL SERVER 2012 Installed to SMB share Error 59 (An unexpected network error occurred)
I have installed SQL 2012 on a clustered file share. When I try to add space to extend the log file for a database I get the following error
Msg 5149, Level 16, State 3, Line 1
MODIFY FILE encountered operating system error 59(An unexpected network error occurred.) while attempting to expand the physical file '\\server\share\path to ldf file.ldf'
The SQL service is running under a local domain account that does not have administrator rights to the system. The service account does have full disk and share permissions and the service starts without any problems. I have applied all the cluster
hotfixes and all the current Windows Updates. If I log into the system as the SQL service domain user account I can access the share and have full rights to it.
Any help would be appreciated.
Thanks,The LDF file is 16 GB
Free space on the drive is 62 GB
Expansion is set to 10 percent
I have several instances on this cluster, some are installed to drive letters and others to the clustered file share. The error only occurs on the SQL 2012 instances that are installed to the clustered file share.
I installed them to the clustered file share because I am running out of drive letters in the cluster. -
The document could not be saved. an unexpected network error occurred
I have several users on a terminal server that access a PDF from a file server. This PDF has many fillable fields like Name: with an empty text box next to it.
Sometimes when the users open this PDF everything is missing except the fillable text fields. If they try to save the file they get the error in the subject of this ticket:
the document could not be saved. an unexpected network error occurred
Obviously, this sounds like a networking error, but 2 things.
1) The terminal server and the file server on both virtual servers on the same host, using the same SAN. Very unlikely to have a networking error.
2) This doesn't happen to every, it seems to be only affecting 3 of about 25 right now, and it is not all the time.
Any thoughts? I have checked to see if there were any hidden lock files, but that wasn't it. Google-fu turned up nothing.
Thanks for your helpHey jdorimoto,
Could be please confirm if you are using Adobe Reader or Acrobat (what version) to open a PDF form.
What version of OS are you using?
Try saving the form to any other location with administrative privileges and then check.
Hope to get your response.
Regards,
Anubha -
Oracle Enterprise Manager 11g - 'unexpected login error'
Hi,
I am having trouble logging into Oracle Enterprise Manager - Fusion Middleware Control. at the login screen when i enter in the UN and PWD, I get the msg: 'unexpected login error'. I was able to login before, this just happend and now I cannot login. Any help would be appreciated.
Thanks.You may have greater chances to get an answer....there:
Enterprise Manager
Greetings...
Sim -
EXPDP error - ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOA
Greetings All,
Oracle 11g (11.2.0.0) on Windows 2008 R2
I am getting the error below during a schema export of just 1 particular schema. Other schema expdp’s don’t encounter this problem.
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [REF_CONSTRAINT:"CM_MASTER"."PPY_PEN_FK"]
ORA-04063: package body "XDB.DBMS_XDBUTIL_INT" has errors
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 8165
----- PL/SQL Call Stack -----
object line object
handle number name
000000047B38A000 18990 package body SYS.KUPW$WORKER
000000047B38A000 8192 package body SYS.KUPW$WORKER
000000047B38A000 2823 package body SYS.KUPW$WORKER
000000047B38A000 8847 package body SYS.KUPW$WORKER
000000047B38A000 1649 package body SYS.KUPW$WORKER
000000047A576CD0 2 anonymous block
Job "CM_MASTER"."EXP_CM_MASTER" stopped due to fatal error at 17:11:30I have deleted the identified constraint, but then errors out again on another constraint.
I have found a tentative resolution for the ORA-39126 error (delete database stats, then gather database stats) but have not done so yet.
I have tried deleting the statistics for just the schema (cm_master), and then re-gathered stats for the same schema. Still get the error.
I am concerned about the ORA-04063: package body “XDB.DBMS_XDBUTIL_INT” has errors.
I have unlocked and set new password for the XDB user, but am not able to logon as XDB to re-compile the package body in question.
We had some maintenance applied over the weekend that “revoked execute from public” on the following packages:
dbms_datapump
dbms_crypto
dbms_crypto_toolkit
dbms_java_test
dbms_random
dbms_sql
utl_file
utl_http
utl_mail
utl_smtp
utl_tcpThe user performing the export with the problem (cm_master) was then granted execute back on the following packages:
dbms_datapump
dbms_crypto
dbms_random
dbms_sql
utl_file
utl_http
utl_mail
(not: dbms_crypto_toolkit, dbms_java_test, utl_smtp, utl_tcp,)Other schemas were granted execute on the following packages and are NOT having expdp problems:
dbms_datapump
dbms_sql
utl_file
utl_http
utl_mail
(not: dbms_crypto, dbms_crypto_toolkit, dbms_random, utl_smtp, utl_tcp )I don't think the public revokes are causing this error because the "Other schemas" do not have this error and were not specifically granted back all of the public revokes that cm_master received back.
I appreciate any suggestions.
Thanks for your time,
Bob
Edited by: Snyds on Jun 5, 2012 10:03 AMrjamya,
I checked dba_registry, all 18 rows returned are VALID.
I attempted to compile the package body identified in the error messages:
ORA-04063: package body "XDB.DBMS_XDBUTIL_INT" has errorswith
alter package xdb.dbms_xdbutil_int compile body;I got thje following results
Error starting at line 60 in command:
alter package xdb.dbms_xdbutil_int compile body
Error report:
SQL Command: package XDB.DBMS_XDBUTIL_INT
Failed: ORA-24344: success with compilation error
24344. 00000 - "success with compilation error"
*Cause: A sql/plsql compilation error occurred.
*Action: Return OCI_SUCCESS_WITH_INFO along with the error code
package XDB.DBMS_XDBUTIL_INT altered.Any other suggestions regarding how to resolve errors in the XDB.DBMS_ packages?
I also tried granting CM_MASTER execute on the packages that I revoked execute to PUBLIC on, with no effect.
I tried “exclude=REF_CONSTRAINT” on the export, the problem seemed to move to the next section:
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 96.31 MB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/DB_LINK
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION
Processing object type SCHEMA_EXPORT/VIEW/VIEW
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [PACKAGE_BODY:"CM_MASTER"."SR_MAINTENANCE"]
ORA-04063: package body "XDB.DBMS_XDBUTIL_INT" has errors
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 8165
----- PL/SQL Call Stack -----
object line object
handle number name
000000047B38A000 18990 package body SYS.KUPW$WORKER
000000047B38A000 8192 package body SYS.KUPW$WORKER
000000047B38A000 2823 package body SYS.KUPW$WORKER
000000047B38A000 8847 package body SYS.KUPW$WORKER
000000047B38A000 1649 package body SYS.KUPW$WORKER
000000047A576CD0 2 anonymous block
Job "CM_MASTER"."EXP_CM_MASTER" stopped due to fatal error at 19:36:23I tried the suggestion from my Google-ing, drop database statistics, then gather database statistics. No effect, same error.
I also tried granting CM_MASTER execute on the packages that I revoked execute to PUBLIC on, with no effect.
Again what seems odd is that I can export other schemas without errors.
Any other suggestions, please.
Thanks,
Bob
Edited by: Snyds on Jun 5, 2012 12:04 PM -
An unexpected processing error occurred. Please contact Microsoft
Before I get flamed like I did on StackOverflow, can I please make the point that there does NOT seem to be a clear route for getting official support for the Live SDK from Microsoft? I'm just trying to get someone from Microsoft to explain to me either
what I need to be doing to my code OR how best to reach out to someone at Microsoft regarding this particular issue.
Using this C# code:
LiveConnectClient liveClient = new LiveConnectClient(currentSession);
LiveOperationResult operationResult = await liveClient.GetAsync(file.FileLocation);
dynamic contentResults = operationResult.Result;
IDictionary<string, object> item = contentResults as IDictionary<string, object>;
the following exception occurred on the GetAsync call:
Microsoft.Live.LiveConnectException occurred
HResult=-2146233088
Message=An unexpected processing error occurred.
Please contact Microsoft.
Source=mscorlib
ErrorCode=server_internal_error
StackTrace:
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task
task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task
task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Relative_History.OneDriveViewModel.<GetPictureURL>d__86.MoveNext()
InnerException:
I've not encountered this exception before and the code works as-is on other files. Restarting the app and the code works as expected so I'm not sure what I'm supposed to do other than "contact Microsoft" as instructed and, as stated at the start
of this post, Microsoft don't say HOW to contact them.Hi,
Do you have some anti-virus software installed and set to scan network drive, temporarily disable it, check if that is the cause.
I also suggest you update the firmware of your router.
Please alos share more information in event viewer with us as mentioned by ZigZag31343x
Meanwhile you can contact the support of My Book Live
http://wdc.com/en/products/products.aspx?id=280
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support -
R 6018 unexpected heap error when generating a form in Designer
When generating a form in Designer i get the following error:
r 6018 unexpected heap error
Has anyone else encountered it before with forms?
Kind Regards
Maurice NiezenYou put the question to wrong forum. If it is regarding to Oracle Forms, then post to Oracle Forms forum. If it is regarding to Oracle Designer, then post to Designer Forum. This is the forum for Oracle Reports.
Thanks,
-Shaun -
WLM 2.5.69 Unexpected Server Error
I have this error on my Torch 9800.
I sign in with my messenger account (eg. [email protected]) and I can login fine, I can chat fine, but suddenly the app logout and appear a message "Unexpected Server Error. Please try again later."
The strange thing is that when I log in with a different account (eg. [email protected]) it can stay all day long connected and no error appears. but with the other account aprox every 5 to 10 minutes it appears this error message.
NOTE:
I tried to uninstall the app, then after reboot I take of the batery and put it again on the device after one minute but it doesnt work.I had the same issue using my blackberry 9800 windows live msn. Unexpected server error. I tried to uninstall/reinstall messenger but same issue. I tried using another account([email protected]) and it was working but not my main account!?? I even re-installed the OS6 but no luck. I tried what you said, simply changing my MSN password. Guess what? It worked! For some reason, simply changing the psw did the trick.
Strange because my old password was working fine on my laptop msn and even MSN on iphone.
thanks!!!
Maybe you are looking for
-
Will Adobe Reader 7.0.9 or 7.1.0 work with Content Server 4?
Hello Adobe, I have a Toshiba Satellite A75-S213 laptop, Intel Pentium 4, 1 GB RAM, Windows XP Home. I've purchased ebooks from SimonSays.com several times over the course of 2008; each time, my Adobe Reader 7.0.9 was able to open the "ebx.etd" file
-
Hello everyone, I've been using Adobe Acrobat Pro 9 to convert PDF files to PDF/a and recently added a batch process to take care of the task. Anytime the process is executed, a copy of the original file (the file being converted) with "_A1b" tagged
-
Replace all occurences in 4.6c
Hi, I have a program which analyse system and gives some output.(Regarding programs,FM's etc). I need to run this my present server which is of 4.6c. But this program developed in ECC 6.0 and when i loaded this notepad program it was giving some erro
-
ERROR 2008-04-30 09:10:35 CJS-00288 Could not update database statistics.
Hi Gurus.. Hi i am in the middle of NW 2004 installation . At the step 29 database update statistics, system stops giving error ERROR 2008-04-30 09:10:35 CJS-00288 Could not update database statistics. DIAGNOSIS: Command brconnect -u / -c -f crsyn -
-
How do you separate the Servers for UCCX?
Hello, We are current on version 8.0.2 uccx servers. We are planning to separate the servers. We will keep one at our location and the other one will be in another location. Can someone tell me where I can find the procedures needed to do this?