Unexpected character change in html message.

Hi,
In Outlook 2013, when i press a link with mailto option set, the new mail window opens with preset contents and recepients. The problem is, the closed square brackets in the body of the mail becomes opened brackets. when I change the format of the same mail
to plain text, the brackets become closed as expected! the problem with HTML format. here is the example:
- Mailto link is set with body of the mail as [sometexthere].
- user press mailto link, new mail window opens with above text in body but like this: [sometexthere[
(notice the open bracket at the end)
- If user change the format to plain text, the brackets displayed correctly as expercted: [sometexthere]
Why the html format changes the brackets there? any helpful input is appreciated.
Thanks

Hi,
How did you create the mailto link? I tried the following link and all is working properly:
mailto:[email protected]?subject=This%20is%20a%20test&body=[some text here]
You may have a try (just click the link above) and let me know the result.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

When viewed on QHD display, HTML messages are very narrow and zooming doesn't change width.

I am migrating to a Lenovo Yoga Pro 2 with 3200x1600 13.3" display. I am using ESR17 due to plug-in compatability issues with newer versions (primarily the Funambol plugin for Calendar sync.) I have had to increase the font size to 24 to be able to see the folders and message subjects. I increased the font inside normal text messages using <ctrl><+> but when I view HTML messages, the formatted message body only fills 1/3 of the message pane and using <ctrl><+> only increases the size of the font inside this width resulting in more and more wrapping until single words have to be wrapped.o
Is this issue fixed in a newer version of Thunderbird? Is there a Calendar sync client for Funambol (OneMediaHub) or Google Calendar that works with the newer version? (I have used Funambol to sync my Calendar with my phone (was BB, now Android) for many years.
Thanks
Gerard

I have DPI set to 200. Most of Thunderbird 17 respects this but HTML messages do not. The scroll bar for message body is also verrry narrow. And the icons on the menu bar (e.g. Switch to Calendar Tab) are mircoscopic.
You didn't say which version of Thunderbird addresses these QHD display issues.
I have tried Google Calendar sync but I have had trouble with offline use. Last time I tried it Google's address book seems to be missing fields supported by Thunderbird's address book.

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

Error Starting up WLS_FORMS weblogic Unexpected character 'S' escaped in pa

Hi,
I am trying to startup my Managed server using Windows x86-64bit, weblogic 10.3.4.
when trying to start up my WLS_FORMS it fails and goes to admin mode.
here is the error
<12 18, 12 1:45:07 PM SGT> <Error> <Security> <BEA-090064> <The DeployableAuthorizer "myrealm_weblogic.security.providers.xacml.authorization.XACMLAuthorizationProviderImpl" returned an error: java.lang.IllegalArgumentException: Unexpected character 'S' escaped in pattern: type=<url>, application=WamInst, contextPath=/C:\SPL\WAMCCH\synergen\.>
<12 18, 12 1:45:07 PM SGT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'WamInst' due to error weblogic.application.ModuleException: Failed to load webapp: 'sia'.
weblogic.application.ModuleException: Failed to load webapp: 'sia'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.IllegalArgumentException: Unexpected character 'S' escaped in pattern: type=<url>, application=WamInst, contextPath=/C:\SPL\WAMCCH\synergen\
     at weblogic.security.providers.utils.Utils.convertLDAPPatternForJDO(Utils.java:415)
     at com.bea.security.providers.xacml.store.BasePolicyStore.readPolicy(BasePolicyStore.java:1216)
     at com.bea.security.providers.xacml.store.BasePolicyStore.readPolicy(BasePolicyStore.java:1146)
     at com.bea.security.providers.xacml.entitlement.PolicyManager.listPolicies(PolicyManager.java:747)
     at weblogic.security.providers.xacml.DeployableAuthorizationProviderV2Helper.startDeployPolicies(DeployableAuthorizationProviderV2Helper.java:84)
     Truncated. see log file for complete stacktrace
>
need some help please.
thanks,

tried to start the server through command line: here are some more logs
8:14 PM SGT> <Error> <Security> <BEA-090064> <The DeployableAuthorizer "myrealm_weblogic.security.providers.xacml.authorization.XACMLAuthorizationProviderImpl" returned an error: java.lang.IllegalArgumentException: Unexpected character 'S' escaped in pattern: type=<url>, application=WamInst, contextPath=/C:\SPL\WAMCCH\synergen\.>
8:14 PM SGT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'WamInst' due to error weblogic.application.ModuleException: Failed to load webapp: 'sia'.
cation.ModuleException: Failed to load webapp: 'sia'
logic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
logic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
logic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
logic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
logic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
ted. see log file for complete stacktrace
a.lang.IllegalArgumentException: Unexpected character 'S' escaped in pattern: type=<url>, application=WamInst, contextPath=/C:\SPL\WAMCCH\synergen\
logic.security.providers.utils.Utils.convertLDAPPatternForJDO(Utils.java:415)
.bea.security.providers.xacml.store.BasePolicyStore.readPolicy(BasePolicyStore.java:1216)
.bea.security.providers.xacml.store.BasePolicyStore.readPolicy(BasePolicyStore.java:1146)
.bea.security.providers.xacml.entitlement.PolicyManager.listPolicies(PolicyManager.java:747)
logic.security.providers.xacml.DeployableAuthorizationProviderV2Helper.startDeployPolicies(DeployableAuthorizationProviderV2Helper.java:84)
ted. see log file for complete stacktrace
8:14 PM SGT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\SPL\Oracle\middleware\DEVCCH\forms\j2ee\formsapp.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
8:14 PM SGT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\SPL\Oracle\middleware\user_projects\domains\ClassicDomain\servers\WLS_FORMS\tmp\_WL_user\formsapp_11.1.1\wb1h9e/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
8:14 PM SGT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\SPL\Oracle\middleware\user_projects\domains\ClassicDomain\servers\WLS_FORMS\tmp\_WL_user\formsapp_11.1.1\wb1h9e\formsweb.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
8:18 PM SGT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\SPL\Oracle\middleware\DEVCCH\forms\provision\frmconfigmbeans.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
8:18 PM SGT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\SPL\Oracle\middleware\user_projects\domains\ClassicDomain\servers\WLS_FORMS\tmp\_WL_user\formsconfigmbeans\1rm9hy/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.
8:18 PM SGT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application formsconfigmbeans is not versioned.>
8:18 PM SGT> <Emergency> <Deployer> <BEA-149259> <Server 'WLS_FORMS' in cluster 'cluster_forms' is being brought up in administration state due to failed deployments.>
8:49 PM SGT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
8:49 PM SGT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of cluster_forms.>
8:54 PM SGT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
9:19 PM SGT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 169.254.5.122:9001 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
9:19 PM SGT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "WLS_FORMS" for domain "ClassicDomain" running in Production Mode>
9:19 PM SGT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
9:21 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
9:21 PM SGT> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>

Deserialization error: XML reader error: unexpected character content:

Hi,
I'm just learning to write web services. I pasted the service and it seems to work.
It's code is :
package server;
import javax.jws.WebService;
public class HelloImpl {
   * @param name
   * @return Say hello to the person.
   public String sayHello(String name) {
     return "Hello, " + name + "!";
}I wired the service using spring, following the tutorial :
public class HellowsImpl {
    String name;
    public HellowsImpl() {
    private Hellows service;
    public void setService(Hellows service) {
        this.service = service;
    public void sayHi() {
        try {
            service.sayHello(name);
        } catch (RemoteException e) {
            // TODO
    public Hellows getService() {
        return service;
    public void setName(String name) {
        this.name = name;
}But when I try this :     HellowsImpl service ;
    service=(HellowsImpl)ac.getBean("hellowsclient");
service.sayHi();I get the exception : Caught exception while handling request: deserialization error: XML reader error: unexpected character content: "fd"
Where might be the problem?

Hi, I am also facing this error while trying to create "Dynamic Proxy Client"
I am accessing the WS method like this
String UrlString = "http://localhost:1559/DynamicProxy/DProxy?WSDL";
String nameSpace = "urn:DProxy/wsdl";
String serviceName = "DProxy";
String port = "DProxySEIPort";
URL serviceUrl = new URL(UrlString);
ServiceFactory serviceFactory = ServiceFactory.newInstance();
Service service = serviceFactory.createService(serviceUrl,new QName(nameSpace,serviceName));
dproxy.DProxySEI myProxy = (dproxy.DProxySEI)service.getPort(new QName(nameSpace,port),dproxy.DProxySEI.class);
String message = myProxy.sayHello("rajeev");
WSDL File content :
<?xml version="1.0" encoding="UTF-8"?><definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="urn:DProxy/wsdl" xmlns:ns2="urn:DProxy/types" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" name="DProxy" targetNamespace="urn:DProxy/wsdl">
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:DProxy/types" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="urn:DProxy/types">
<complexType name="sayHello">
<sequence>
<element name="String_1" type="string" nillable="true"/></sequence></complexType>
<complexType name="sayHelloResponse">
<sequence>
<element name="result" type="string" nillable="true"/></sequence></complexType>
<element name="sayHello" type="tns:sayHello"/>
<element name="sayHelloResponse" type="tns:sayHelloResponse"/></schema></types>
<message name="DProxySEI_sayHello">
<part name="parameters" element="ns2:sayHello"/></message>
<message name="DProxySEI_sayHelloResponse">
<part name="result" element="ns2:sayHelloResponse"/></message>
<portType name="DProxySEI">
<operation name="sayHello">
<input message="tns:DProxySEI_sayHello"/>
<output message="tns:DProxySEI_sayHelloResponse"/></operation></portType>
<binding name="DProxySEIBinding" type="tns:DProxySEI">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="sayHello">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/></input>
<output>
<soap:body use="literal"/></output></operation></binding>
<service name="DProxy">
<port name="DProxySEIPort" binding="tns:DProxySEIBinding">
<soap:address location="http://localhost:1559/DynamicProxy/DProxy" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"/></port></service></definitions>
and Here is my SEI Implementation class
public java.lang.String sayHello(String name) throws java.rmi.RemoteException {
String message = "hi.."+name+"..How r u";
return message;
Can any one help me plz...
Thanks in advance..

Unexpected namespace change after mapping change

Unexpected namespace change after mapping change
Posted: Apr 18, 2006 5:17 AM Reply
Hi all
We developped a mapping about one year ago on XI SP9.
The source of the message was an Idoc and the target an XML sample (and not a xsd!) of what our customer expected.
Everything was working fine at that point.
Here is an extract of the output we had:
<?xml version="1.0" encoding="UTF-8" ?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://schemas.xmlsoap.org/soap/envelope/">
<env:Header xmlns:p="http://localhost/webs/msgDetails.xsd">
<p:msgDetails xmlns:p="http://localhost/webs/msgDetails.xsd">
<p:sender>
<p:senderId>XXX</p:senderId>
<p:senderName>AUSTRALIA/NEW ZEALAND</p:senderName>
</p:sender>
We are now running SP14 and we had to change the mapping. Since we changed it the namespaces defined in the sample XML we use as a target structure are not used anymore, instead they are replaced by ns0, ns1...
Now the output looks like this:
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://www.w3.org/2001/XMLSchema-instance" ns1:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://schemas.xmlsoap.org/soap/envelope/">
<ns0:Header>
<ns2:msgDetails xmlns:p="http://localhost/webs/msgDetails.xsd" xmlns:ns2="http://localhost/webs/msgDetails.xsd">
<ns2:sender>
<ns2:senderId>21873</ns2:senderId>
<ns2:senderName>XXX</ns2:senderName>
</ns2:sender>
Any idea what has happened here?
Thanks in advance
Gregory

Hi Gregory,
after a short view I would say that the two structures you have posted are logically equivalent.
I try to make it clear for the sender-element.
In the first example you have a tag <p:sender>. Obviously the namespace prefix 'p' is used here. In order to find out the qualified name of the element represented by that tag you have to find the namespace declaration for prefix p. As the tag itself does not contain such a declaration you have to go to the parent-tag. Indeed, here you find a declaration for p which says that p is just an alias for 'http://localhost/webs/msgDetails.xsd'. Hence the qualified name for the element is: 'sender' in namespace 'http://localhost/webs/msgDetails.xsd'.
Now let us look at the corresponding tag <ns2:sender> in the second document. In oder to identify the qualified name of the element you have to find out, which namespace is bound to the namespace prefix ns2 which has been used here. Again you cannot find this in the tag itself but in its parent. Here you find that ns2 is bound to 'http://localhost/webs/msgDetails.xsd'. (Indeed, here you see that prefix p is also bound to that namespace. This seems to be superfluous to me, as the prefix is never used.)
Consequently, the qualified name of that element is: 'sender' in namespace 'http://localhost/webs/msgDetails.xsd'.
Thus, both tags represent elements with the same qualified name. For more details look at http://www.w3.org/TR/REC-xml-names/.
Greetings Stephan

Unexpected error from Microsoft HTML compiler.

when trying to complie my .mpj file into Microsoft HTML help,
I get the following error message
Unexpected error from Microsoft HTML compiler.
any ideas about what to do to get my compiler to work
properly?

Please don't cross post. Only one post gets answered and
anyone later searching then finds useless threads.
Please add a link here to the post that has been answered.
Also you duplicated the post in this forum. Please edit that
too.
You need to be a bit patient if nothing happens when you
click the button to post. Trick is that if nothing happens copy you
message to the clipboard and cancel the post. Sometimes it has
taken, nothing else to do. Sometimes it has not so then create a
new post using the clipboard.

Mail in Mountain Lion does not display all HTML messages

For some reason Mail app stopped siplaying most HTML messages. I haven't changed any settings but can't seem to figure out how to make mwaagwa qirg HTML display the way they used to. Thanks in advance!

how do you log into hotmail at work? via webmail interface? hotmail provides POP email access only when using an email clienet and you probably have Mail set to remove messages from server after downloading them. go to Mail preferences->account->advanced and check those settings. you can change them to leave messages on server or to remove them from server only when they are moved from the inbox.

Unexpected character content when calling getFolderResponse

When I call getFolderResponse on shared folder I get an exception:
deserialization error: XML reader error: unexpected character content: "[email protected]"
at com.sun.xml.rpc.client.StreamingSender._handleRunt imeExceptionInSend(StreamingSender.java:331)
at com.sun.xml.rpc.client.StreamingSender._send(Strea mingSender.java:313)
at com.novell.groupwise.ws.GroupWisePortType_Stub.get FolderRequest(GroupWisePortType_Stub.java:3858)
Caused by: deserialization error: XML reader error: unexpected character content: "[email protected]"
at com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.deserialize(LiteralObjectSerializerBase .java:128)
at com.novell.groupwise.ws.NameAndEmail_InterfaceSOAP Serializer.doDeserialize(NameAndEmail_InterfaceSOA PSerializer.java:84)
at com.sun.xml.rpc.encoding.InterfaceSerializerBase.d eserialize(InterfaceSerializerBase.java:118)
at com.novell.groupwise.ws.SharedFolder_LiteralSerial izer.doDeserialize(SharedFolder_LiteralSerializer. java:310)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.internalDeserialize(LiteralObjectSerial izerBase.java:216)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.deserialize(LiteralObjectSerializerBase .java:124)
at com.novell.groupwise.ws.Folder_InterfaceSOAPSerial izer.doDeserialize(Folder_InterfaceSOAPSerializer. java:72)
at com.sun.xml.rpc.encoding.InterfaceSerializerBase.d eserialize(InterfaceSerializerBase.java:118)
at com.novell.groupwise.ws.GetFolderResponse_LiteralS erializer.doDeserialize(GetFolderResponse_LiteralS erializer.java:54)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.internalDeserialize(LiteralObjectSerial izerBase.java:216)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.deserialize(LiteralObjectSerializerBase .java:124)
at com.novell.groupwise.ws.GroupWisePortType_Stub._de serialize_getFolderRequest(GroupWisePortType_Stub. java:6396)
at com.novell.groupwise.ws.GroupWisePortType_Stub._re adFirstBodyElement(GroupWisePortType_Stub.java:543 6)
at com.sun.xml.rpc.client.StreamingSender._send(Strea mingSender.java:228)
... 6 more
In xml I can see only one place with that string: <gwt:owner>username.mypostoffice.mydomain@company. com</gwt:owner>
Any suggestion what to do with this problem?

The owner element changed format. You have to have a consistent
jar file with later POA's.If you have an 8.0.x POA, you need
to recompile the GWWS jar file. (You can't use the original.)
Preston
>>> On Friday, October 15, 2010 at 2:36 AM, testowy
email<[email protected]> wrote:
> When I call getFolderResponse on shared folder I get an exception:
>
> deserialization error: XML reader error: unexpected character content:
> "[email protected]"
> at
>
com.sun.xml.rpc.client.StreamingSender._handleRunt imeExceptionInSend(Streami
> ngSender.java:331)
> at
> com.sun.xml.rpc.client.StreamingSender._send(Strea mingSender.java:313)
> at
>
com.novell.groupwise.ws.GroupWisePortType_Stub.get FolderRequest(GroupWisePor
> tType_Stub.java:3858)
> ..
> Caused by: deserialization error: XML reader error: unexpected
> character content: "[email protected]"
> at
>
com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.deserialize(Lit
> eralObjectSerializerBase.java:128)
> at
>
com.novell.groupwise.ws.NameAndEmail_InterfaceSOAP Serializer.doDeserialize(N
> ameAndEmail_InterfaceSOAPSerializer.java:84)
> at
>
com.sun.xml.rpc.encoding.InterfaceSerializerBase.d eserialize(InterfaceSerial
> izerBase.java:118)
> at
>
com.novell.groupwise.ws.SharedFolder_LiteralSerial izer.doDeserialize(SharedF
> older_LiteralSerializer.java:310)
> at
>
com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.internalDeseria
> lize(LiteralObjectSerializerBase.java:216)
> at
>
com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.deserialize(Lit
> eralObjectSerializerBase.java:124)
> at
>
com.novell.groupwise.ws.Folder_InterfaceSOAPSerial izer.doDeserialize(Folder_
> InterfaceSOAPSerializer.java:72)
> at
>
com.sun.xml.rpc.encoding.InterfaceSerializerBase.d eserialize(InterfaceSerial
> izerBase.java:118)
> at
>
com.novell.groupwise.ws.GetFolderResponse_LiteralS erializer.doDeserialize(Ge
> tFolderResponse_LiteralSerializer.java:54)
> at
>
com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.internalDeseria
> lize(LiteralObjectSerializerBase.java:216)
> at
>
com.sun.xml.rpc.encoding.literal.LiteralObjectSeri alizerBase.deserialize(Lit
> eralObjectSerializerBase.java:124)
> at
>
com.novell.groupwise.ws.GroupWisePortType_Stub._de serialize_getFolderRequest
> (GroupWisePortType_Stub.java:6396)
> at
>
com.novell.groupwise.ws.GroupWisePortType_Stub._re adFirstBodyElement(GroupWi
> sePortType_Stub.java:5436)
> at
> com.sun.xml.rpc.client.StreamingSender._send(Strea mingSender.java:228)
> ... 6 more
>
> In xml I can see only one place with that string:
> <gwt:owner>username.mypostoffice.mydomain@company. com</gwt:owner>
>
>
> Any suggestion what to do with this problem?

Cannot display remote images in HTML messages

Hi all.
This has been a problem since Tiger for me and ironically, is affecting me on two macs (although I sync the two together, so whatever the problem is, I'm guessing it's been copied to both locations). Here's the deal:
I cannot display images in my messages. If I click the checkbox (under viewing in mail prefs) "display remote images in HTML messages" I get the same behavior as if it is unchecked. I've tried checking and unchecking to no avail. My guess is a corrupted preference file, but I don't know which one. If I delete my mail prefs, will I need to do anything with regards to my mailboxes etc? I have over 3GB of offline mail, all filed away into hundreds of folders and do NOT want to mess with that.
Any suggestions are most appreciated. I'd love to see my images again without clicking on the "load images" button for EVERY email.
Thanks,
Rob

I can't believe there's no answer for this at Apple Support! (I looked.) On my MacBook with Leopard (10.5.6 and Mail 3.5) the problem is fairly recent - I only noticed it a few days ago. Unchecking and rechecking the Display remote images in HTML messages does not work, and neither does restarting the computer (I rarely do, preferring to put it to sleep.) Before I removed the plist I thought I'd check here first, having the same reasons for reluctance as xrob - and a good thing I did, too. I'd hate to have the same (bad) experience as someone who already tried it. The only thing I can think that I changed recently was to add SSL support to (all) my accounts. Could that be the culprit? I guess not. I removed "use SSL" on one of the accounts but it changed nothing, except for the port number. I closed and re-opened Mail but did not restart the computer. And, where do you find the "load images" button?

Send email including the data field into the html message body

Hi all,
I would like to send an email to each recipient once only, and including a data field into the html body message. I am not sure how to achive that with my current stored procedure.
USE [CallManager]
GO
/****** Object: StoredProcedure [dbo].[PersonalCallsReminder] Script Date: 08/27/2014 10:26:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[PersonalCallsReminder]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Email Users
declare @email varchar(max)
declare mycursor cursor FAST_FORWARD for
SELECT dbo.HumersStaffExtension.email
FROM dbo.Calls_Mobile_Header INNER JOIN
dbo.HumersStaffExtension ON
dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email,
dbo.HumersStaffExtension.res_id
HAVING (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
OPEN mycursor;
FETCH NEXT FROM mycursor
INTO @email
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'CallsManagement',
@recipients = @email ,
@body_format = 'HTML',
@subject = 'Personal Calls Reminder',
@body = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<title>Personal Calls Reminder</title>
<style type="text/css">
body {
font-family: "Times New Roman", Times, serif;
font-size: 11pt;
.auto-style1 {
background-color: #FFFF00;
</style>
</head>
<body>
<div>
<table style="width: 800px">
<tr>
<td>Dear,<br />
<br />
Please review your phone bills and submit your personal calls using the following link:<br />
<a href="http://companyxyz/personalcalls/">Personal Calls</a></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>Kindly be informed that the deadline to process new bills is on the
<span class="auto-style1">15th of each month</span>.</strong></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td>For assistance, please contact <a href="mailto:[email protected]">[email protected]</a></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>*** This is an automatically generated email, please do not reply ***</strong></td>
</tr>
</table>
</div>
</body>
</html>
FETCH NEXT FROM mycursor
INTO @email
END
CLOSE mycursor;
DEALLOCATE mycursor;
END
Changing the query to the following:
SELECT TOP (100) PERCENT dbo.HumersStaffExtension.email, dbo.Calls_Mobile_Header.ExtractDate
FROM dbo.Calls_Mobile_Header INNER JOIN
dbo.HumersStaffExtension ON
dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email, dbo.HumersStaffExtension.res_id,
dbo.Calls_Mobile_Header.ExtractDate
HAVING (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
ORDER BY dbo.HumersStaffExtension.email
Will provide me with the following results:
email ExtractDate
[email protected]
July-2014
[email protected]
August-2014
[email protected]
July-2014
[email protected]
August-2014
Is it possible to send email to [email protected] once only including in the html message body the ExtractDate field results for July-2014 and August-2014?
I appreciate any assist on the issue.
Thank you in advance.

Refer the below code highlighted in bold.
USE [CallManager]
GO
/****** Object: StoredProcedure [dbo].[PersonalCallsReminder]    Script Date: 08/27/2014 10:26:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:  <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[PersonalCallsReminder]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Email Users
declare @email varchar(max),@date datetime
declare @temp table (email varchar(50), extractDate datetime)
insert into @temp
  SELECT     TOP (100) PERCENT dbo.HumersStaffExtension.email, dbo.Calls_Mobile_Header.ExtractDate
  FROM         dbo.Calls_Mobile_Header INNER JOIN
         dbo.HumersStaffExtension ON
         dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
  GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email, dbo.HumersStaffExtension.res_id,
         dbo.Calls_Mobile_Header.ExtractDate
  HAVING      (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
  ORDER BY dbo.HumersStaffExtension.email
declare mycursor cursor FAST_FORWARD for SELECT DISTINCT email from @temp
OPEN mycursor;
FETCH NEXT FROM mycursor
INTO @email
WHILE @@FETCH_STATUS = 0
BEGIN
    DECLARE @date nvarchar(200)
    SELECT @date=Stuff((SELECT ',' + [extractDate]
              FROM   @temp where email = @email
              FOR xml path('')), 1, 1, '')
       EXEC msdb.dbo.sp_send_dbmail
            @profile_name = 'CallsManagement',
            @recipients = @email ,
            @body_format = 'HTML',
            @subject = 'Personal Calls Reminder',
            @body = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<title>Personal Calls Reminder</title>
<style type="text/css">
body {
font-family: "Times New Roman", Times, serif;
font-size: 11pt;
.auto-style1 {
background-color: #FFFF00;
</style>
</head>
<body>
<div>Extract Date : ' + @date + '</div>
<div>
<table style="width: 800px">
  <tr>
   <td>Dear,<br />
   <br />
   Please review your phone bills and submit your personal calls using the following link:<br />
   <a href="Personal">http://companyxyz/personalcalls/">Personal Calls</a></td>
  </tr>
</table>
<br/>
<table style="width: 800px">
  <tr>
   <td><strong>Kindly be informed that the deadline to process new bills is on the
   <span class="auto-style1">15th of each month</span>.</strong></td>
  </tr>
</table>
<br/>
<table style="width: 800px">
  <tr>
   <td>For assistance, please contact <a href="[email protected]:[email protected]">[email protected]</a></td>
  </tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>*** This is an automatically generated email, please do not reply ***</strong></td>
</tr>
</table>
</div>
</body>
</html>
      FETCH NEXT FROM mycursor
      INTO @email
END
CLOSE mycursor;
DEALLOCATE mycursor;
END
Regards, RSingh

Can I Send HTML Messages in Mail?

I am trying to send html messages in Mail, and also to add a small html code to my signature. Is this possible? If so, how? When I put in straight code, it just remains text. I know I receive html mail, so....?

RTf with Tiger Mail is HTML but the Mail.app does not include an HTML composer/editor.
In order to send basic text as HTML instead of Plain Text when using RTF for message composition requires changing the font or color of existing text in a new message and/or when selecting bold, underline or italic for a word or a portion of existing text. This part I don't understand since selecting RTF for message composition should send the font and font size selected under Fonts & Colors for the Mail.app preferences as HTML by itself.
You can use an HTML editor/composer of choice (Apple's Text Edit application can be used for this) and save the completed HTML document. Open the saved HTML document with Safari and after confirming the layout, etc. with Safari, at the menu bar go to File and select Mail Contents of This Page and the rendered page with Safari will be copied to a new Mail.app message which will be sent in its entirety.
You can set up a "template" this way by saving the HTML message as a Draft. Utilize a user created "On My Mac" location mailbox named Templates and transfer this message from the account's Drafts mailbox to the Templates mailbox. Select this templates message and at the menu bar, go to Message and select Send Again entering all recipients and making any changes, etc. The original template message will not be altered.
Regarding creating a Mail.app signature with HTML code, check this link.
http://allforces.com/2006/04/14/css-signatures/
Don't know for sure at this point but it appears this may become easier with the Mail.app under Leopard.
http://www.apple.com/macosx/leopard/mail.html

Sending UTF-8 + HTML messages.

Hi all,
I'm working on sending Turkish email to our customers, notify them that they need to activate their account before using our product. Email should contain a link that customers will click on, and it should be in Turkish. I store all messages in .properties file.
                MimeMessage message = new MimeMessage(session);
                message.setFrom(new InternetAddress(EMAIL_FROM));
                // compose body text
                String body += text from .properties file
                message.setText(body, "UTF-8");   //( 1)
                or
                message.setContent(body, "text/html"); // (2)I tried both (1) and (2) alternative, when I tried (1) all Turkish text could be rendered properly but it was not in HTML format at all.
When I tried (2), text couldn't rendered in UTF-8 form, but for HTML it worked well.
1)Am I able to use both of 2 these forms in email? or can just use one of them: UTF-8 or HTML.
2) Is there any way that I can set character encoding before sending message out?
Regards,

I got it fixed, simply put some more text into this:
message.setContent(body, "text/html; charset=utf-8");Thanks for reading.

Creating OS X Mail HTML Messages

Hi all,
I have a mailing script which I use to send a message to a defined mailing list using AppleScript, AppleWorks and OS X Mail.
At the moment the outgoing message is created by the script as plain text, but what I'd like it to be is HTML. Any idea how I can set the mail message body to send HTML within the script?
Help appreciated.
Ross

This is to replace the previous post:
I have been searching for how to create custom HTML emails in Mail, in a way that would work with OS 10.3 and 10.4, so as not to rely on the user having Tiger. After reading through many posts, I came up with a script that creates a new HTML message that you can still edit in Mail itself before sending, and you don't need Safari 2. I'm new to scripting so please let me know if this is useful.
Jodain
Part I: defines the HTML code; you can make something in the script itself as long as the string this_html ends up in proper formatting. I actually came up with this primarily for pasting most the html code in the script itself, with a few changing variables. If you do paste or type html code in the script, make sure you use \\ for every \, and \" for every ". If you're using TextEdit to alter the html, use find and replace in that order (\:\\ then ":\").
Part II: builds a message in Mail with the html content... an undocumented property of a Mail message. However, it only works when visibility is false, so unless you send it right away, the user is not able to still type the recipients and edit the body in Mail as he/she might be used to. Which brings me to...
Part III: takes the saved draft and opens it up for editing. The open command only lets you view the message, even if it is outgoing, so I had to come up with a work-around so you can still edit as if you're composing it for the first time.
--Part I
tell application "Safari" to set this_html to source of document 1
tell application "Safari" to set this_page to name of document 1
--Part II
tell application "Mail"
activate
set theMsg to make new outgoing message with properties ¬
{subject:this_page, html content:this_html & ¬
return & return, content:""}
tell theMsg to make new to recipient
save theMsg
--Part III
if not (exists the front message viewer) then make new ¬
message viewer
tell front message viewer
set selected mailboxes to {the drafts mailbox}
set sort column to date received column
set sorted ascending to false
delay 3
set selected messages to {first message}
tell application "System Events" to tell process ¬
"Mail" to keystroke return
end tell
end tell

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

What I recommend you try doing first is to turn iMessage off then back on. If that doesn't work, make sure that your Apple ID and password are correct. If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
Hope this helps!

Unexpected character change in html message.

Similar Messages

Maybe you are looking for