Unexpected deactivation of process monitoring

Hi everybody, hope someone can help me .
I have the following problem with the process monitoring. When I activate the monitoring it works perfectly during all day and night but, next day, when I check it , it seems to be disabled. I mean, the icon tell me that it is still active but no monitoring is executed at all for the new day.
I have no idea why it stops working when a new day starts. The last monitoring messages are issued at 23:30 - 23-45 then...nothing more...
Looking at ST22 I have seen that every night (after midnight) there is an RFC ERROR on Solution manager (DESTINATION_NOT_OPEN ) probably due to the fact that the monitored system (the productive system) is stopped for the backup. I think that maybe it could be the reason why the monitoring stops working but I'm not sure.
Someone can help me ?

This is an autoreply mail.
I have found the solution by myself in an OSS note that completely solve the problem.
Thanks anyway.

Similar Messages

An unexpected error occur processing your request." when launching Muse

An unexpected error occur processing your request." when launching Muse.I am experincing the same problem i found the folder but when i try to delete the file it says action can not be completed file is open in adobe CC iam not even signed in

Hello,
Could you please open Task Manager (Windows) or Activity Monitor (Mac) and look for processes named either AAM Updater or Adobe CC (Creative Cloud).
Please kill (end) the process and after that try to delete the folder.
Regards,
Sachin

Unix/Linux Process Monitoring

When I attempt to run the add monitoring wizard in Operations Manager 2012 R2 against the unix/linux process monitor I receive the following error :-
Date: 12/02/2015 11:55:23
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UISDKException: The page [Microsoft.SystemCenter.CrossPlatform.UI.OM.Integration.Authoring.ProcessTemplate.ProcessDetailsPage] in the assembly [Microsoft.SystemCenter.CrossPlatform.UI.OM.Integration.Authoring.ProcessTemplate,
Version=7.0.6000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the Management Pack that defines this page is installed
or the assembly containing the page is in the path of the executable or that the page derives from known Operations Manager page type. ---> System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions
property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UIPageSet.CreatePage(String assemblyName, String typeName)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UIPageSet.CreatePage(String assemblyName, String typeName)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UIPageSet.GetPages()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomTemplatePagesManager.GetPages()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.PageManagerBase.AttachToFramework(IPageFramework pageFramework, Boolean readOnly)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Pages.TemplateListPage.AddPagesForSelectedItem()
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UIPageSet.CreatePage(String assemblyName, String typeName)
I receive this in my test lab and in a live environment. Both environments are running Operations Manager 2012 R2 and I have imported the latest management packs which are 7.5.1042.0.
I am full administrator at the server and operations manager level. So what is it I am missing?
Thanks.

Agree with Steve, Upgrade to last UR, This issue is related to Management Pack so that Check correct version of Management Pack which is compatible with SCOM 2012R2
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Business Process Monitoring with SAPCCMSR Agents

Hi
I have installed a SAPCCMSR Agent in a non-sap system to monitor log files.
This is the configuration about a particularly log file:
LOGFILE_TEMPLATE
DIRECTORY="E:\LOG"
FILENAME="senddata*.txt"
PATTERN_0="error"
VALUE_0=RED
MONITOR_NEWEST_FILES=1
In this folder every day, log are created (with name senddata-DD-MM-YYYY) and I would like to monitor only the last log produced to search for error.
When the agent run, it creates a monitor in rz20 with the name of the current log(for example senddata-08-09-2014).
Tomorrow when a new log will created, the monitor will change its name (for example in senddata-09-09-2014).
I also want use business process monitoring to create a monitor and assign the mte in rz20.
When I choose from a list which monitor assign, it give me the name of the ccms monitor that have the name valid for today(senddata-08-09-2014).
The problem is that tomorrow this MTE will change its name and will invalidate my monitor in bpm.
I tried to insert manually the value in bpm monitor like ...../senddata*/.... to see if dinamically, it will acquire the monitor with the name in rz20.
But this doesn't work.
Anyone have an idea on how monitor this?
Thanks very much & Best regards
Marco

Hi Mark,
When the agent run, it creates a monitor in rz20 with the name of the current log(for example senddata-08-09-2014).
"senddata-08-09-2014 " - Is this the name of your log file created on OS level everyday ?
If yes, then why not after every log switch after end of day, a file with name sendata replaces its old content with the contents of current logs ?
This "replacing" is scheduled to run every 5 mins from OS level(cron script) and it picks the name of the file using current date method ?
In this was you will have your monitor with same name.
Regards,
Divyanshu

Using ARIS process models as the foundation for Business Process Monitoring

Hello,
Do anyone know if you can use IDS Scheer ARIS process models and the integration between IDS Scheer ARIS and SAP Solution Manager as the starting point for end-to-end Business Process Monitoring (BPM) so that you get the process description/model automatically in Solution Manager BPM and just need to configure the monitoring (more or less that you monitor against the modelled process in ARIS)?
Is there an API for SAP Solution Manager BPM so that non-SAP solutions/systems can be part of the end-to-end process monitoring?
If not, how do you usually integrate non-SAP solutions that are part of an end-to-end process that you want to monitor into SAP Solution Manager BPM, or do you not use Solution Manager BPM for this?
What is the roadmap for SAP around SAP Solution Manager BPM when it comes to non-SAP systems/applications/solutions and the new SAP NetWeaver BPM functionality?
Regards,
Markus Johansson

Hello Markus,
I just paste my answer form the other forum entry Re: Business process management strategy in SAP?
in a nutshell BPM Netweaver is focussing on so called edge-processes (usually
SOA-based and often workflow related). These edge-processes a thought to enhance exisitng core business processes and should provide the fast competitive edge versus competitors. Examples would be also xApps. For this Netweaver provides process modelling tools, where you can get exectuable code through the integration between CE and PI. The monitoring part for these processes is mainly targeting business end-users and business manager.
Business Process Monitoring with Solution Manager focusses on core business processes which are realized with the "conventional", "old" SAP Architecture, e.g. Order-to-Cash or Procure-to-Pay. You get a combination of technical monitors (average response times of transactions, background job runtimes, monitors for IDOC or qRFC processing) and application related monitors (you get more than 200 pre-configured application monitors out-of-the-box like number of overdue customer orders or outbound deliveries or number of deliveries with goods issue posted but no invoice). The target group here is the support organization of the customer, from Basis-Support over application support on IT side to process owner on business department side.
Overview presentations can be found under
https://service.sap.com/bpm --> Media Library --> Customer Information -->
"Business Process Monitoring - Part 1 & 2".
Or look under https://www.sdn.sap.com/irj/sdn/nw-processmonitoring
In the end BPM Netweaver and BPMon SolMan are complementary for different purposes and different target groups.
Best Regards
Volker

An unexpected error occurred processing your request. Check the logs for details and correct the problem.

Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
Rakesh

Hi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Unable to see system process request page, process monitor page

Hi all,
We refreshed our test instance with prod recently. sysaudit and ddd audits were clean except for the following entries in sysaudit which i thought wasnt of much significance here.
SEC-30) Role User table (ROLEXLATOPR) should be populated when new User Profiles (entries in PSOPRDEFN) are created
sing User Profile component through PIA. The following User Profiles need to be fixed by simply opening and saving
hem through PIA:
per ID     Description
OPP_PORTALADM     Common Portal Administrator
OPP_PORTALMGR     Common Portal Manager
OPP_USER     Common Portal User
3 Total Rows
On logging to the superuser VP1, am not able to see many pages, such as system process request, process monitor and also do not have access to user profile page.
The upgcount was matched with prod instance and didnt find any issues there. For the same profile in prod, the user has access to all the above mentioned pages. In the cloned copy, no user has access to these pages.
We checked the permission lists and roles attached. They are all in place as the same user is able to access the pages in prod instance.
Could it be webprofile issue. We tried clearing the webserver and appserver cache and bouncing them. the webserver in use is websphere and OS is AIX.
Appreciate any valuble feedback i can get on this.
Thanks

Here's just a thought.
Do you know if it is a security problem or a portal problem? I mean is the issue just that the links for Process Monitor, etc. don't show up in the menu, or does it give you a not authorized message?
Here's the thought:
Try to hit these links by pasting them into your browser:
http://localhost:80/psp/HR90DMO/EMPLOYEE/HRMS/c/PROCESS_SCHEDULER.PRCSMULTI.GBL
http://localhost:80/psp/HR90DMO/EMPLOYEE/HRMS/c/PROCESSMONITOR.PROCESSMONITOR.GBL
Make sure that you change:
- "localhost" for your servername
- "80" for your port
- "HR90DMO" for your weblogic domain name
If you can see the page, we need to look at your portal setup or portal security, maybe run Portal Security Sync. If you get an error message, can you post that message, and maybe we need to check the main security setup, etc.
Hope that helps at least get a little further toward a solution.

Process monitor alert to include process id and or user

I set up a SCOM 2012 process monitor from the process monitoring template, that now quite nicely alerts me when an instance of a process consumes too much CPU or too much Memory from the host. The problem I have now, is that I have 15 Remote Desktop
Service hosts that my customers log on, to run this process, and an average of 45 users per RDSH. While it's nice to know which server has the process running too high, what I really need to know is the user and/or PID of the offending process. I easily have
this process running 45 times per RDSH throughout the day. If I knew the PID or the user, I could much more easily find my process, and with user, I could even shadow my user via my service broker to see what's going on. As it is now, I have to myself RDP
to the server, pull up task manager, sort by offended instance (memory or CPU), to find the task. Then, find the user/pid associate, go back to the service broker and shadow the session to determine the cause.
I there a fairly simple way to get the PID or user information from the process to show up I the alert? I would think it pretty basic to expect that if I monitor a process, I want to the at least the PID of that process in the alert...and preferably
the user. Other suggestions to accomplish this? I want to be able to hand these alerts (via notification) off to my support folks, so they have enough information to resolve the issue, without jumping from RDSH to RDSH.
Thanks in advance!
mpleaf

Hi mpleaf,
Please look at this post:
http://social.technet.microsoft.com/Forums/windows/en-US/de3799e0-f7db-4481-8f50-cdfe39d73aef/how-to-monitor-process-using-scom-with-pid
Natalya

Queries on Business Process Monitoring (BPM) & Interface Monitoring

Dear all,
I have got a few queries on the subject and would greatly appreciate any valuable inputs.
Before I proceed, want to clarify that I have downloaded all overtly available documents (PDFs, SIMs) from the following URLs:
http://service.sap.com/rkt-solman
http://service.sap.com/solutionmanager Media Library
http://service.sap.com/bpm Media Library
I may not have read them all though since I come from a Functional angle.
Kindly reply to whatever query you can please. Not all of them are sequential.
Queries:
(1) How are Interfaces with External Systems (beyond the firewall of the enterprise) monitored ?
(2) Is it really worth listing all such External Systems as Logical Components in their own right ? I guess this makes sense if at a Process Step level, one wants to list a 'specific' Logical Component involved instead of 'generic' term like External System. However, it would benefit only if Interface Monitoring is feasible; isn't it ?
(3) There are Interfaces which are built between SAP and External System and serve various Business Processes under various Business Scenarios. In such circumstances, it is not easy to list which Process 'owns' the Interface. Therefore, under a normal Implementation Project structure (SOLAR02), choosing a particular Process Step, getting into 'Development' Tab and listing the Interface Program name may not be feasible, since there is no particular place where it belongs.
Is it therefore a good idea to create namesake Scenario for capturing all interfaces and list a library of all interfaces and store documents right there ? If so, will these namesake processes be of any use in BPM at a later date ?
(4) If my primary objective is to accomplish Interface Monitoring and not Business Process Monitoring per se, is it a good idea to create a new Solution Landscape, and manually create Business Processes that are suited to list Interfaces than to assign Template or Implementation Project to the Solution Landscape, and inherit those Processes ?
(5) What is it that a SAP Competence (Support) Centre will find as a 'major' gain in activating BPM to monitor Interfaces alone - is there something that SolMan's BPM based Interface Monitoring gives more than what PI level reporting may provide them with ?
(6) In Interfaces with Non-SAP Systems (some of them are old/ proprietary legacy systems with Credit Card companies; some of them are like 'Active Directory' servers), is it possible to define Metrics for BPM that such systems will contribute to SolMan, for reporting purposes ? Or, is it too much to hope for
Thanks again, for your patience and advance thanks for your kind responses.
Srini
Bes

Hi,
Welcome to BPM
You have asked too many questions in a single Post, Please read rules of engagement before posting
You can monitor the following without any trouble.
● ALE/EDI
● qRFC
1) Its obvious, if your firewall blocks all your request to external enterprise, it is not possible to monitor.
3) These interfaces are not the one related to development tab in SOLAR02, you have to map them from BPM.
4) Yes, you don't have to depend on any project for your processes, you can add it in your Solution Landscape.
5) Post a Separate Thread!!!
6) Post a Separate Thread!!!
Hope this gives a better idea.
Feel free to revert back.
--Ragu

Business Process Monitoring: restrict authorization to confirm alerts

Hello Experts,
I am working with Solution Manager's Business Process Monitoring and I am now facing these questions regarding roles and authorizations to allow/forbid alert confirmation:
- What is the authorization mechanism behind alert confirmation in BPM? Is a specific authorization object involved when pressing the button "Confirm selected"?
- Is it possible to adjust roles (if no standard role is available) in order to have, for example,
--Role1: give users the authorizations to walk through DSWP transaction, see business processes' alerts and confirm them
--Role2: give users the authorizations to walk through DSWP transaction, see business processes' alerts but NOT allow them to confirm any alert?
Our Solution Manager version:
SAP EHP 1 for SAP Solution Manager 7.0 (SP22)
ST-PI 2008_1_700 level2
ST-SER 701_2008_2 level 6
ST-A/PI 01M_CRM570
I hope I managed to explain my doubts properly; any help will be very appreciated.
Thanks in advance for your support,
best regards
Paolo

Hello Paolo,
it is the first time that I hear that request. Can you explain what your use case is? Why would you allow some users to see and analyze alerts but do not let them confirm the alerts if the problem is solved?
As the user/date/time is logged if somebody confirms you have the transaparency who confirmed which alert at what point of time.
I think that currently no such split in authorizations is supported but perhaps you can find something in the securtiy guide.
Best Regards
Volker

Monitoring proxy abap in business process monitoring

Hi
Expert. Iu2019m working with Business Process Monitoring in my Solution Manager 7.0 sp20.
I would to monitor the communication between SAP ECC and SAP PI.
SAP ECC and SAP PI communicate by proxy.
I would know if can I monitor the proxy abap using SAP PI Message Error Monitoring based on Message-Based-Alerting (RWB).
I have just defined the alert category in abap stack and in RWB. In RWB I have inserted all information in u201CConditionsu201D fields and in the u201CWhere did the error occur?u201D fields I have chose:
Integration engine : XI Proxy
Error Code: *
Is this the correct procedure to monitor a proxy abap?
Thanks a lot
Giou2019

Hello Giovanni,
The described procedure looks correct in general. If you have set any restrictions in "Conditions" fields than you will only monitor on these specific message. If not all message will be considered which turn into a error status on the ABAP Proxy.
For information regarding the PI/XI Message Based Alerting please refer to service.sap.com/bpm -> Media Library -> Technical Information "Setup Guide - Interface Monitoring".
Best regards,
Maciej

Information on Business Process Monitoring

Hello experts,
I want to know if there is a way to monitor spool jobs in business process monitoring or other tool? I assume that I can monitor background jobs with BPMon but I don't find where I can monitor the content of the spool generated by the job?
I read also that job management can monitor jobs, but for the task "monitoring", it refers to BPMon.
Can you please tell me if I can do it? because I read in some doc that it is possible but no way to find how.
Thank you in advance for your help.
BR,
Mohamed BOUSSAID

Hello Mohamed,
the job monitoring does not allow the monitoring of a spool file as it is an unstructured TemSe file. If you have important information to monitor you should write it into the job log and classify it via message class, message type and message number. Such structured information can be easily monitored via BPMon.
Monitoring the content of a unstrucutred spool file which can easily get several MB is too performance expensive and hence not supported.
Best Regards
Volker

What is Business Process Monitoring Tool (BPMT)?

Dear colleagues
There is also a strange tool named Business Process Monitoring Tool (BPMT), provided as an Add-on installation within SAP Netweaver 701 SP06
[Note 1453759 - BPMT 701 Business Process Monitoring Tool: Installation|https://service.sap.com/sap/support/notes/1453759]
What is it, and how it is connected with SAP NW BPM?
Any explanation would be much appreciated

Hi,
this tool is to provide a business process monitoring within the ABAP stack. So you're able to get information about "how many processes of process X have not been finished, yet". This is based on several agents listening to the business process implementations (e.g. SAP Business Workflow) and provides those generated events to a monitoring engine.
As far as I know this component has not been released, yet. I don't know the delivery date (maybe in QII or QIII 2011) --> who know's?
Cheers
Martin

Roles for Business Process Monitoring

Hi Expert,
I'm working with sap solution manager and Business Process Monitoring.
It works fine but I need to create particular roles for my users.
I have created one solution with 2 business scenarios (scenario 1, scenario 2) and 10 Business Processes for each scenario.
I would know if exist a role in order to allow user 1 to see only BP in scenario 1 and allow user 2 to see only BP in scenario 2.
I saw roles: SAP_OP_DSWP_BPM and SAP_SMWORK_BPM but I didn't find any suitable authorization object to use.
Thanks for collaboration
best regards
gio'

Hi Giovanni,
the answer is unfortunately no. There is no authorization object available that limits the visibility of business processes. You could only split by solution, so creating two solutions each containing 10 business processes.
In general you can find information about roles and authorizations in SAP note 834534. There are several MS Excel files attached to this note.
Best Regards
Volker

Monitoring Types on Business Process Monitoring

Hi All
I am currently busy with setting up business process monitoring in our company.
I have gone through all the steps and am currently at a stage where I have to test the monitoring types.
Can anyone please explain what kind of information is required on the monitoring types and if you can also give me a brief explanation on the different kinds of monitoring types and what exactly the do because when I am trying to set them up, nothing is happening and I am not getting any alerts.
Regards
Khuselwa

Hi Khuselwa,
Have you already checked the information provided on the BPM Website in SAP Support Portal?
[http://www.service.sap.com/bpm|http://www.service.sap.com/bpm]
Best regards,
Ruediger

Unexpected deactivation of process monitoring

Similar Messages

Maybe you are looking for