Unexpected end of file on DNG using LR5

I was editing images in Lightroom 5, just applying "blue" labels to images I wanted to look at again. Then on one image I did some color and tone corrections. Then when I went to open that image in PS I got an error message saying Unexpected end-of-file. The other images which had no color or tone corrections do not have this problem and open fine.
I downloaded a trial of capture one, and it is not able to open or convert it either.
I know this pops up from time to time but not much with DNG, as I saw it listed in a few forums, but none really seem to answer if it is fixable. I looked at the files in iHex-hex editor as one forum briefly mentioned that, but even comparing it to other files that are working fine I don't know what I am looking at with that.
I don't have a backup of this image, so recovery is my only option...that is if it is an option.
The images are stored on a Drobo. I had LR set to save metadata changes to the files automatically. Camera was Leica M240, but I think this error happened while editing in LR, as I was able to generate a 1:1 preview before I started editing.
Do you know if it is fixable? And if so how?
Thanks in advance

I believe the only reason it is displaying in LR is because I had already generated a 1:1 preview of it before I did the editing that I think created the issue. I have tried every export option I know in LR, and all produce the same error
Thanks though.

Similar Messages

Having error when opening psd file. "could not complete your request because an unexpected end-of-file was encountered". Im using a mac air, CS5.1

"could not complete your request because an unexpected end-of-file encountered".

Probably not good news I'm afraid. Hopefully you use Time Machine to keep regular backups of your work?
Have you tried to open the file in Graphic Converter (shareware application)?
I find file corruption practically non-existant these days. I would suggest that you maintain your machine. This can be done with Onyx http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html. Run all the tasks in the "automation" section of this application.
If you can do a drive check - checking your hard drive for physical issues might also be a good idea.

There was an unexpected end of file error

I am currently using DNG Converter 8.1 and converting NEF files from a Nikon D600.
Occacionally I get an error message on some of the files.
"The was an unexpected end of file error" It only happens on some of the ffiles but I can not figure out what is wrong or how to fix the problem.

plasticAnimal wrote:
my solution to the problem was to re-copy the problem files from the card.
Consider checking your disk drive, or just getting a new one.
If known good (on disk) files go bad, problem is usually disk (or ram).
If files known to be good on card, are bad after transfer, problem is usually with the transfer hardware.
If files bad on card, problem is usually camera or card, but may be reader...
Problem is not likely due to DNG Converter software (nor OS) - sorry Jeff if not worded strongly enough for you.
R

What causes 'Unexpected end-of-file' error?

Hi,
I am a photographer and an avid Lightroom user. I have two camera's (Nikon D700 and D300) and two computers, a desktop PC and a MacbookPro. Lightroom is installed on both computers.
For the last three photoshoots I have had this problem where 1 in 3 to 1 in 5 images in Lightroom on my desktop PC suddenly gives a 'Unexpected end-of-file' error. First I thought it was my camera. But then I loaded the images onto my MacbookPro and they worked fine. Then I took some images with my other camera, loaded them on to my Desktop PC, and, voila, same problem.
The problem specified: the image stops rendering a preview. A dull preview appears. At the top of the screen the message appears: "An unexpected end-of-file occurred." The histogram window stays empty and the image can not be developed.
I have browsed through this forum some looking for the cause and the fix. There are some mentions of it, but they all date back to 2007.
I run LR 2.2 on Windows XP SP2 and on a MacbookPro with OS X, version 10.5.8.
Please help me understand the cause of this problem, and help me find a fix?
Thanks,
Rogier
Rotterdam, The Netherlands
www.rogierbos.com

While the corruption in your .NEF file could come from any one of a number of sources, here is a way to recover at least some of the information if you own Adobe Acrobat. Your .NEF file should contain a smaller JPEG file created by your Nikon camera when the picture was taken. Even if the .NEF file is corrupt, the JPEG may well be intact, and you can tell that's the case if a preview is visible in Lightroom or Bridge.
If you try to print it from Bridge or Lightroom, though, you will get an error. You can get around this by loading up a CODEC that will let you preview the files in Windows Photo Gallery. Nikon has one available for download to use with Vista x32 at http://www.nikonimglib.com/nefcodec/index.html.en, but it doesn't support Vista x64, so if you're running that (as I am) you'll need a second party CODEC such as the one available from http://www.ardfry.com/Products.htm with a 15-day trial download available. They also have a DNG CODEC which I have not tried.
With that CODEC installed and your system rebooted, preview the damaged NEF file in Windows Photo Gallery. Choose the "Print" option and select the "Adobe PDF" printer. Choose the "Postscript Custom Paper Size" option, and set the dpi resolution to the highest available (4000).
Go to the "Options" link on the bottom right of the window and uncheck the "Sharpen For Printing" box, as you can do this yourself with later processing. Then go to the "Printer Properties" link to see the Adobe PDF settings.
Go to the Adobe PDF Settings tab and choose Default Settings: High Quality Print, which will set the resolution to 2400 dpi.
You want to have Acrobat interfere as little as possible with the output, so select "Edit" from the Default Settings tab, which will bring up the "High Quality Print - Adobe PDF Settings" dialog. Here, turn off the "Optimize for fast web view" check box, then go to the "Images" folder and set the "Downsample" setting to Off and the pixels per inch to 2400. Also, set "Compression" to Off.
If you're going to do this in the future, you can also "Save As ..." your settings for future use with a name like "Fix Bad NEF Files."
Print the file to a designated folder. It won't be quite as good as the NEF file would have been, but at least you haven't lost the shot.

Error message: unexpected end-of-file in Photoshop CS4

"could not complete the command because an unexpected end-of-file was encountered"I just started getting them tonight. It happened when I opt-doubled clicked on an image in Dreamweaver to edit in Photoshop. Now it pops up on every image. I just reinstalled Photoshop CS4 and Bridge today. Help!

Check your scratch disks for fragmentation ( use something like disk warrior ) and available space. Sounds like the files are not getting completely saved.

Quick par upload NWDS ERROR Unexpected end of file from server

Hi:
I can´t deploy my par file from NWDS, this is the error:
28.04.09 / 08:24] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
java.net.SocketException: Unexpected end of file from server
     at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:763)
     at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:626)
     at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:760)
     at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:626)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:957)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:363)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:435)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.deploy(DeployEngine.java:221)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.processUpload(SAPMPWizard.java:416)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.run(SAPMPWizard.java:350)
     at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
     at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
     at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard.performFinish(SAPMPWizard.java:531)
     at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
     at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at com.sap.portal.developmentTools.general.uploader.QuickPARUploader.run(QuickPARUploader.java:146)
     at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
     at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
     at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Any idea?
Thanks a lot for your time on this thread.
Rocío.

Hi Rocio,
Check the proxy settings in NWDS and use JAVA RUNTIME 1.5.0_06-b05.
Please refer to the links below where similar problems have been resolved:
Cannot deploy par from NWDS
Can not download SOAP CLIENT TOOL
Another way of deploying the .par file is from System Administration -> Support -> Portal Runtime -> Administration Console.
Hope this resolves your issue.
Regards,
Seema Rane.
Edited by: Seema Rane on Apr 29, 2009 8:57 AM

HELP! 'unexpected end of file' error-Is there a fix?! OS 10.4.11

Getting 'Unexpected end of file' error when trying to open a file (that's a rush job) in QuarkXpress 6.5. I attributed it to lack of memory, so I immediately backed up all files and HD to an external drive to free up space. Restarted and prayed... Quark launched, but file won't open. Same error.
Have: 2.1 GHz PPC G5, 1.5 GB DDR2 SDRAM OS 10.4.11 (pre Intel)
Capacity: 232.8GB, Available: 163GB, Used 69.6GB
Have been searching help site for 5 hours looking for answer and am DESPERATE! I saved changes regularly, but can't access this file at all... I've lost 2 full days & nights working on this project that has to be done in 2 days.
Ran Disk Utility, but no success opening this specific Quark file (Quark will launch- it's just this file that's affected). Have tried to down load Applejack, etc. but keep finding out they only support OS 10.5 or higher. (Haven't been able to afford upgraded system since Intel requires purchase of full verions of graphics software instead of upgrades to the tune of $6k).
PLEASE, I only know enough to be dangerous, so ANY help is GREATLY APPRECIATED!
Savvy folks- if I'm in the wrong place, please send me a link where I can solve this personal catastrophy.
Many thanks-in-advance

I think you best do over your work from scratch. You need to make backup copies of the files regularly. You need to have copies on multiple disks or flash drives.
I saved changes regularly
You should know that this isn't sufficient. You need to have multiplte copies of the file. Backup anyone? Could be the file structure got messed up. Could be Quark messed up the file.
You need to get a newer machine. G5's are not reliable any more. Need to see if Quark will run in compatiblity mode on an intel machine. You should at least get an external firewire drive from owc. Old hd's are not reliable.
Boot in safe mode. Hold down the shift key when powering on the machine. This will run a disk repair program. Boot up will take longer as the harddrive is scanned and repaired.
See this article:
http://docs.info.apple.com/article.html?artnum=107393
Or from:
    mrtotes article :
    Boot from the OS X Install disk and from the Menu Bar choose Disk Utility. Then run "Repair Disk" and "Repair Disk Permissions" on your hard disk.
    a brody:
    https://discussions.apple.com/docs/DOC-1689
Here the apple article on booting single user mode and using fsck. See the section on Use fsck:
http://docs.info.apple.com/article.html?artnum=106214
I suspect not but Perhaps Disk Warrior will be of some help:
http://www.alsoft.com/DiskWarrior/
Robert

How to resolve Unexpected End of file error in Web Crawling

how to resolve Unexpected End of file error in Web Crawling....
I am getting java.net.SocketException :Unexpected End of file error in Web Crawling.
How to get rid of this error.
Please help anybody ASAP.

1. Handle this exception - not recommended since you will be creating an exception handling overhead unnecessarily.
2. Check for EOF using available() method in InputStream. It returns 0 if there are no bytes to read.

Bulk Insert Failure: Unexpected end of file

Hi all,
I have a Bulk Insert task which pulls data from a .csv file to SQL server table.
It works fine 99 out of 100 times, but sometimes it throws the following error in production.
"System exception: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information
about the error.Bulk load: An unexpected end of file was encountered in the data file.". "
My Client says that there was no change to the file and it runs fine the next time.Its a error which I could not reproduce in development.
I have an interface prior to this bulk insert interface to check whether the file is completely available(i.e i try to open the file and check whether its used by any other process).
I'm supposed to give an answer for why it fails sometimes. Your thoughts on this?
Rajkumar

The Bulk insert task is used in SSIS package. The error Posted in my first post is what I got from SSIS..
Why don't you use Data Flow task? BULK INSERT is fast, but not much error control.
BOL quote ( http://msdn.microsoft.com/en-us/library/ms141679.aspx ) : "Error Handling in Data
When a data flow component applies a transformation to column data, extracts data from sources, or loads data into destinations, errors can occur. Errors frequently occur because of unexpected data values. For example, a data conversion fails because a column
contains a string instead of a number, an insertion into a database column fails because the data is a date and the column has a numeric data type, or an expression fails to evaluate because a column value is zero, resulting in a mathematical operation that
is not valid.
Errors typically fall into one the following categories:
Data conversion errors, which occur if a conversion results in loss of significant digits, the loss of insignificant digits, and the truncation of strings. Data conversion errors also occur if the requested conversion is not supported.
Expression evaluation errors, which occur if expressions that are evaluated at run time perform invalid operations or become syntactically incorrect because of missing or incorrect data values.
Lookup errors, which occur if a lookup operation fails to locate a match in the lookup table.
Many data flow components support error outputs, which let you control how the component handles row-level errors in both incoming and outgoing data. You specify how the component behaves when truncation or an error occurs by setting options on individual
columns in the input or output. For example, you can specify that the component should fail if customer name data is truncated, but ignore errors on another column that contains less important data."
http://msdn.microsoft.com/en-us/library/ms141679.aspx
Kalman Toth SQL SERVER & BI TRAINING

CS5.1 Camera Raw Unexpected end of file error

I ran into this error a couple of times (the problem would not resolve for these few affected photos) when editing my raw files in my CS5.1 trial.
"Could not complete your request because an unexpected end-of-file was encountered."
I could not get around opening these particular raw files and have come to the theory that these files are corrupted due to the limitations in SD card write speeds. I never had this problem on my D80 when working in CS4 or CS5, but then again the D80 doesnt shoot 20Mb raw files. My D7000 shoots continuous 6fps I'm shooting large, fine JPEG + RAW which pumps out around 25 Mb per photo. At 6fps this is somewhere around 150 Mb/s... My SD Card is a Sandisk 8gb extreme class 6 which has a rated write speed of 22Mb/s but its been a while since I've seen the documented number.
I took one of these raw files and opened it with Photomatix 3 (HDR Software) to create a Psuedo HDR file. The product was obviously corrupted.
Anyone care to comment on other culprits and solutions?
Cheers,
Alex

Files DO get corrupted, often by flash memory errors, sometimes by transfer problems. Revisit all the steps in your process and maybe try transferring the files to your computer differently (e.g., use a flash card reader instead of the camera cable and see if there's a difference in the files).
One thing that almost universally ISN'T necessary to worry about is that your flash memory could be corrupted if you take photos too quickly. CF write speed bottlenecks are dealt with properly by all the camera makers, generally by slowing down the picture-taking process when the camera's RAM buffers fill. You DO have to remember not to cut power to the camera while it is still writing to the flash memory, however, which can take some time after you finish shooting.
You should reformat your flash card in your camera, and personally I would treat that particular card as suspect until you prove that it can be filled and every image is complete and uncorrupted. You might even want to fill it with "junk" shots just to test it.
-Noel

File Error: could not complete your request because an unexpected end-of-file was encountered

I saved a painting I was working on in photoshop for the past week, went to open it up this morning and got the following error: could not complete your request because an unexpected end-of-file was encountered.
I tried opening it up in other programs with no luck. Any suggestions?

Probably not good news I'm afraid. Hopefully you use Time Machine to keep regular backups of your work?
Have you tried to open the file in Graphic Converter (shareware application)?
I find file corruption practically non-existant these days. I would suggest that you maintain your machine. This can be done with Onyx http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html. Run all the tasks in the "automation" section of this application.
If you can do a drive check - checking your hard drive for physical issues might also be a good idea.

"Could not complete your request because an unexpected end-of-file was encountered."

I have gotten this error message a few times now. "Could not complete your request because an unexpected end-of-file was encountered."
My file many layers... a total of 100mgs+. But I work with this kind of file often, so... hmm. It won't open. Is it corrupted? Any way to restore? I can go back in time with our 'time machine program... but that brings me back to having a previous version and many hours of lost work.
I use a Mac OS x 10.5.8, Photoshop version 6 from the 2003 CS suite.
Thanks for any input or advice. Rebecca Doyle

Hello, Rebecca. This forum is for Photoshop Elements, the consumer version of Photoshop. For questions about full photoshop/Creative Suite you'll find more knowledgeable help in the Photoshop forum:
http://forums.adobe.com/community/photoshop/general
Good luck!

Unexpected end of file from server

Can someone confirm if this is an issue with the code being passed or if it is an issue with the applet?
It seems that I may be receiving this message when I have more than one web app open that uses java.
I am not a java developer but I am just looking for some help, tell me if more detail is needed please.
Failed to parse the response with XML stream: java.net.SocketException: Unexpected end of file from server
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
     at com.kronos.wfc.platform.uiframework.framework.xml.SerializationClient.getResponse(SerializationClient.java:170)
     at com.kronos.wfc.platform.uiframework.applet.datamanager.RetrieveObjectsFromServer.run(RetrieveObjectsFromServer.java:172)
Caused by: java.net.SocketException: Unexpected end of file from server
     at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getHeaderField(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getHeaderField(Unknown Source)
     at com.kronos.wfc.platform.uiframework.framework.xml.SerializationClient.getResponse(SerializationClient.java:132)
     ... 1 more
UIDefaults.getUI() failed: no ComponentUI class for: javax.swing.JOptionPane[,0,0,0x0,invalid,alignmentX=0.0,alignmentY=0.0,border=,flags=0,maximumSize=,minimumSize=,preferredSize=,icon=,initialValue=,message=The application could not get data from the server.
Please log off and try again.,messageType=ERROR_MESSAGE,optionType=DEFAULT_OPTION,wantsInput=false]
java.lang.Error
     at javax.swing.UIDefaults.getUIError(Unknown Source)
     at javax.swing.MultiUIDefaults.getUIError(Unknown Source)
     at javax.swing.UIDefaults.getUI(Unknown Source)
     at javax.swing.UIManager.getUI(Unknown Source)
     at javax.swing.JOptionPane.updateUI(Unknown Source)
     at javax.swing.JOptionPane.<init>(Unknown Source)
     at javax.swing.JOptionPane.showOptionDialog(Unknown Source)
     at javax.swing.JOptionPane.showMessageDialog(Unknown Source)
     at javax.swing.JOptionPane.showMessageDialog(Unknown Source)
     at com.kronos.wfc.platform.uiframework.applet.baseapplet.KronosApplet.private_showErrorMessage(KronosApplet.java:3225)
     at com.kronos.wfc.platform.uiframework.applet.baseapplet.KronosApplet.showErrorMessage(KronosApplet.java:3193)
     at com.kronos.wfc.platform.uiframework.applet.baseapplet.KronosDataManager.showError(KronosDataManager.java:859)
     at com.kronos.wfc.platform.uiframework.applet.baseapplet.KronosDataManager.processNotification(KronosDataManager.java:429)
     at com.kronos.wfc.platform.uiframework.applet.baseapplet.KronosDataManager.update(KronosDataManager.java:741)
     at com.kronos.wfc.platform.uiframework.applet.datamanager.ServerConnectionObject.setRetrievedObject(ServerConnectionObject.java:195)
     at com.kronos.wfc.platform.uiframework.applet.datamanager.RetrieveObjectsFromServer.run(RetrieveObjectsFromServer.java:190)

System.getProperties().put("proxySet", "true");You'll have to show what else you get from the server, but the above line does nothing.

Unexpected end of file occurred while opening Photoshop CC psd in Photoshop Cs4

Can anyone help me? I'm using Photoshop CC 2014 on Windows 7 at home and Photoshop CS4 at school. I get an Unexpected end of file occurred when I try to open my assignements at school.
How can this be fixed?
Thank you!
Sas

Hi Curt...I'm new here, so I'll get the hang of it. Thank you for your quick response. I'm using the Mac OS X version 10.6.8 I'm a digital artist and was working on a psd file. I use a wacom tablet and all of a sudden everything stopped responding. I had to force quit Photoshop and open again. That's when the window telling me an unexpected end-of-file was encountered. So much work has gone into this piece of artwork, so needless to say, I'm beyond frustrated. I had saved this work along the way just so I wouldn't lose it, but now this unexpected twist. I will try what you suggested to see if it will help.
Again THANK YOU!
Katy

Oraclejsp unexpected end of file error

I am getting an OracleJsp Unexpected End of File error when I use the <logic:present name="add"> <html:form action="myAction" /> </logic:present> tag. "add" is referring to something that was set in a struts action (ie: request.setAttribute("add", "present")). I've even tried a scriplet that checks request.setAttribute and I get the same error. Any ideas? Thanks.

Often, file headers get smurfed. Photoshop is very critical of these headers.
JPEG's seem to be very sensitive to these errors. My trick is to open in a more liberal program, like ThumbsPlus, IrfanView, or PhotoImpact, and then just do a Save, keeping the JPEG compression levels low. This nearly always clears things up for PS.
Good luck,
Hunt

Unexpected end of file on DNG using LR5

Similar Messages

Maybe you are looking for