Unexpected error during setup

I am trying to get a new Time Capsule setup. It's starts the process but when it trys to to join an existing network I get the error, "An unexpected error occured. Try again."
I have tried resetting etc, any thoughts?
Thanks,
-Ed

Join a network is not an approved Apple setup for the TC and why it is hidden.
I suggest you avoid it if at all possible because the moment it works the ethernet ports will be shut off.
Anyway if you are determined.. the security type must match.. generally that means you cannot use wpa/wpa2.. it is not specific.. use wpa2 AES on the router you are joining and wpa2 personal on the TC.
Remember joining wireless to another brand device is never a 100% guaranteed operation. You cannot ever be 100% sure it will work.. wireless chipsets from different manufactures simply will not work together. Apple designed their stuff to work with other apple routers.. so you use extend not join. You may end up having to think up another way to do things.

Similar Messages

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

Microsoft sharepoint foundation 2010 encountered an error during setup. One or more required Office components failed to complete successfully

Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.Main

Hi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com

Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.

Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer

"Microsoft Office Professional Plus 2013 encountered an error during setup."

"Microsoft Office Professional Plus 2013 encountered an error during setup."
Can anyone help me?

Hi,
Please first make sure you have completely uninstalled previous installed version of Office. We can use Fix it tool in the following KB article:
http://support.microsoft.com/kb/971179/en-us
http://support.microsoft.com/kb/2739501/en-us
Also try to disable all your security programs when you try installing Microsoft Office.
In addition, please check the following link and try the method descrbed to check if it helps:
http://www.rushinformation.com/microsoft-office-professional-plus-2013-encountered-an-error-during-setup-fixed/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Microsoft office professional 2013 encountered an error during setup

Trying to install the 32 bit version of Office 2013. Planning to keep all my old versions. I have Access 2002 and 2003 that I need. Was not installing Outlook 2013 as Outlook 2010 is the only Office app that I care if I have issues with
and my IT dept controls a a bit more. Getting the error "microsoft office professional 2013 encountered an error during setup" with no other info. I have Windows 7, full admin rights, and closed all other Office apps. I Just did a restart
which also installed all current Windows patches. Got the same error.
Any ideas or where to look for the cause?

I am having the same problem and am dead in the water.
Just in case one of the suggestions might have worked, I went through all of those above with no luck. At first the issue was that the preview version of the OSE was left behind by the uninstall, but I replaced it with the 2010 version, no dice.
I then uninstalled all office products to get the OSE uninstalled, and setup now gets beyond that hangup, but still fails. Following is the section of the log with the errors (MS email me for the full log):
2012/11/07 15:38:25:897::[5980] MSI(ACTIONSTART): 'Action 15:38:25: PublishProduct. Publishing product information'
2012/11/07 15:38:25:897::[5980] MSI(INFO): 'Action start 15:38:25: PublishProduct.'
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action ended 15:38:25: PublishProduct. Return value 1.'
2012/11/07 15:38:25:901::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallExecute. '
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action start 15:38:25: InstallExecute.'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:25:922::[5980] MSI(ACTIONSTART): 'Action 15:38:25: AllocateRegistrySpace. Allocating registry space'
2012/11/07 15:38:25:923::[5980] MSI(ACTIONSTART): 'Action 15:38:25: ProcessComponents. Updating component registration'
2012/11/07 15:38:25:934::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterLogonTaskRollback.x64.1033. '
2012/11/07 15:38:25:935::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterFallBackTaskRollback.x64.1033. '
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: RemoveODBC. Removing ODBC components'
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallFiles. Copying new files'
2012/11/07 15:38:26:142::[5980] MSI(ACTIONSTART): 'Action 15:38:26: CAOSMRegisterLogonTask.x64.1033. '
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:248::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:249::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:250::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTask.x64.1033 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)'
2012/11/07 15:38:26:253::[5980] MSI(INFO): 'Action ended 15:38:26: InstallExecute. Return value 3.'
2012/11/07 15:38:26:322::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:323::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:26:325::[5980] MSI(ACTIONSTART): 'Action 15:38:26: Rollback. Rolling back action:'
2012/11/07 15:38:26:325::[5980] Log level changed from: Standard to: Verbose
2012/11/07 15:38:26:465::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:466::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:467::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:468::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:469::[5980] MSI(INFO): 'CustomAction CAOSMRegisterFallBackTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:524::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:525::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:526::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:537::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:542::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:546::[5980] MSI(INFO): 'Action ended 15:38:26: INSTALL. Return value 3.'
-Ingram

Microsoft Office 2010 encountered an error during setup: With No error codes/

Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?

Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry

Workspace : Unexpected error during interactive component execution

Hi !
During execution, we have random events where this error appears. It appears for different field names and objects. The error code is displayed in the workspace and this is an excerpt of the workspace log.
We have 2 workspaces using websphere. We noticed that in the past, a few times this was solved by synchronizing the nodes. I does not get fixed like that anymore.
Any clues? this same deployed application worked in the past, it was not updated.
THANKS,
Regards,
Matias
<W>, "May 11, 2011 2:04:59 PM", Default, Main, <2> WebContainer : 0, "Error workspace-1305483686838
Unexpected error during interactive component execution.
Caused by: Invalid type for field newProduct . Expected : 'xobject.company.BusinessObjects.Product'. Received : 'Lxobject/company/BusinessObjects/Product;' .
fuego.web.execution.exception.UnexpectedExecutionException: Unexpected error during interactive component execution.
     at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:187)
     at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
     at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:229)
     at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:220)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:83)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1087)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:118)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:837)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:680)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:588)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:524)
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:321)
     at fuego.web.execution.servlet.ServletExternalContext.forwardInternal(ServletExternalContext.java:197)
     at fuego.web.execution.servlet.ServletExternalContext.finishExecution(ServletExternalContext.java:103)
     at fuego.xobject.runtime.components.XObjectHtmlRuntimeController.service(XObjectHtmlRuntimeController.java:342)
     at fuego.web.execution.servlet.ServletRedirector$ControllerRedirector.forward(ServletRedirector.java:197)
     at fuego.web.execution.servlet.ServletRedirector.redirect(ServletRedirector.java:58)
     at fuego.web.papi.TaskExecutor.processRedirect(TaskExecutor.java:224)
     at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:104)
     at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
     at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:229)
     at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:220)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:83)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1087)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
     at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
     at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
     at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
     at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:837)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:680)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:588)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:524)
     at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:751)
     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:125)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
     at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
     at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1497)
Caused by: java.lang.ClassCastException: Invalid type for field newProduct . Expected : 'xobject.company.BusinessObjects.Product'. Received : 'Lxobject/company/BusinessObjects/Product;' .
     at fuego.io.ObjectSerialization.resolveFieldValue(ObjectSerialization.java:434)
     at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:290)
     at xobject.Moving.BusinessObjects.Agreements.Agreement.readObject(Agreement.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
     at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
     at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
     at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
     at xobject.Moving.BusinessObjects.AccountAgreement.readObject(AccountAgreement.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:378)
     at java.util.ArrayList.readObject(ArrayList.java:617)
     at sun.reflect.GeneratedMethodAccessor15.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
     at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
     at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
     at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
     at xobject.Moving.BusinessObjects.Account.readObject(Account.xcdl)
     at sun.reflect.GeneratedMethodAccessor347.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:378)
     at java.util.HashMap.readObject(HashMap.java:1318)
     at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
     at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
     at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
     at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
     at xobject.Moving.BusinessObjects.Person.readObject(Person.xcdl)
     at sun.reflect.GeneratedMethodAccessor348.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
     at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
     at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
     at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
     at xobject.Moving.BusinessObjects.Account.readObject(Account.xcdl)
     at sun.reflect.GeneratedMethodAccessor347.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
     at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
     at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
     at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
     at xobject.Moving.Views.AbstractView.readObject(AbstractView.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:378)
     at java.util.HashMap.readObject(HashMap.java:1318)
     at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
     at java.io.ObjectInputStream.readArray(ObjectInputStream.java:1670)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1335)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:378)
     at fuego.papi.impl.j2ee.Marshaller.unmarshall(Marshaller.java:46)
     at fuego.papi.impl.j2ee.EJBTaskExecutionResult.unmarshall(EJBTaskExecutionResult.java:73)
     at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:204)
     at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
     at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
     at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
     at fuego.web.papi.TaskExecutor.processResult(TaskExecutor.java:266)
     at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:101)
     ... 59 more
"

Hi
Please let me know, how your exception got resolved ?
Thanks,
Brijesh Kumar Singh

Unexpected error during interactive component execution.

I have an automatic activity within a screenflow. When I try to access this, it is giving the following exception in logs :(workspace.log)
[<D> 0719 07:52:42.519] Main (<9> [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): ExecutionDispatcher.actionId: RUN_APPLICATION_TASK
[<D> 0719 07:52:42.519] Main (<9> [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): ExecutionDispatcher.runApplicationTask: Global Excecution ->fuego.papi.impl.j2ee.EJBGlobalExecution@9994d62
[<D> 0719 07:52:42.519] Main (<9> [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): ExecutionDispatcher.customRunTask(): 4b10000
[<W> 0719 07:52:42.835] Main (<9> [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Unexpected error during interactive component execution.
*[     (cont)     ] Main: Caused by: The catalog manager [bpmXtest/2009-09-25 11:06:11-05:00.1327] is not registered.*
[     (cont)     ] Main: fuego.web.execution.exception.UnexpectedExecutionException: Unexpected error during interactive component execution.
[     (cont)     ] Main: at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:187)
[     (cont)     ] Main: at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
[     (cont)     ] Main: at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:229)
[     (cont)     ] Main: at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:220)
[     (cont)     ] Main: at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
[     (cont)     ] Main: at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:83)
[     (cont)     ] Main: at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
[     (cont)     ] Main: at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
[     (cont)     ] Main: at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
[     (cont)     ] Main: at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
[     (cont)     ] Main: at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
[     (cont)     ] Main: at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
[     (cont)     ] Main: at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
[     (cont)     ] Main: at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
[     (cont)     ] Main: at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
[     (cont)     ] Main: at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
[     (cont)     ] Main: at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
[     (cont)     ] Main: at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
[     (cont)     ] Main: at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
[     (cont)     ] Main: at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
[     (cont)     ] Main: at weblogic.security.service.SecurityManager.runAs(Unknown Source)
[     (cont)     ] Main: at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
[     (cont)     ] Main: at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
[     (cont)     ] Main: at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
[     (cont)     ] Main: at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
[     (cont)     ] Main: at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
[     (cont)     ] Main: Caused by: java.lang.ClassNotFoundException: The catalog manager [bpmXtest/2009-09-25 11:06:11-05:00.1327] is not registered.
[     (cont)     ] Main: at fuego.util.CatalogLoaderMgrCache.findOrCreateCatalogClassloader(CatalogLoaderMgrCache.java:83)
[     (cont)     ] Main: at fuego.util.CatalogLoaderMgr.getCatalogClassLoader(CatalogLoaderMgr.java:68)
[     (cont)     ] Main: at fuego.papi.impl.j2ee.EJBTaskExecutionResult.unmarshall(EJBTaskExecutionResult.java:72)
[     (cont)     ] Main: at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:204)
[     (cont)     ] Main: at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
[     (cont)     ] Main: at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
[     (cont)     ] Main: at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
[     (cont)     ] Main: at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
[     (cont)     ] Main: at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
What does the exception refer to:Caused by: java.lang.ClassNotFoundException: The catalog manager [bpmXtest/2009-09-25 11:06:11-05:00.1327] is not registered.

Just guessing here, but I'd suspect that you have a BPM Object that you are using in your screenflow. Inside your BPM Object you probably have a method that makes the database call. I'm assuming that you might be using Dynamic SQL in your method.
If this is the case then make sure that this method has the property set to "Server Side".
Dan

An unexpected error during Command execution

Hi,
I am using Project Server 2007 SP 2 at the moment. One of our user keeps encountering this error "An unexpected error during Command execution" for a project file. We tried to restore the earlier version of the plan using Administrative restore.
But it only works as a temporary fix as the problem keeps reapprearing. Kindly help.

Only SP2 for Project 2007? Probably not worth trying to debug, with 2007 it is almost essential to have SP3 and the very last cumulative update for Project pro and Server. 2007 was a very buggy version (they were forced to release at same time as Office
2007 and it was too soon).
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Unexpected error during HTTP request to voucher server The operation timed out

I read books from my library through a system called READS. I have successfully used DE 1.0 without any problems, however, when I tried to use it recently it required me to upgrade to 1.5. Well I did so and now the books won't authorize. Here is the error message I am getting:
Adobe DRM Error System: 5 State: 4 Class: 600 Code: 106 Message: Error on request or response from server. Please check your network connection and try again. Scroll below or view error.log for more details.
Adobe DRM client Error: 706 Unexpected error during HTTP request to voucher server The operation timed out
Requested URL: http://207.54.136.76/fulfill/ebx.etd?action=lend&orderid=939605378082105&bookid=ContentRe serveID:B91CC494-23AF-4C6A-9B0C-7DA050C05722-50
Requested URL: http://207.54.136.76/fulfill/ebx.etd ?action=lend &orderid=939605378082105 &bookid=ContentReserveID:B91CC494-23AF-4C6A-9B0C-7DA050C05722-50
--- end ---
I have tried this multiple times with more than one book. Again, they worked just fine before I did the upgrade. I am running Vista SP1.

Never mind, they obviously post the message on the ticket, but it doesn't send an e-mail. I will try what they indicated. Here is their response...
Thank you for contacting Adobe Technical Support.
I understand that you are getting "Adobe DRM Error" in Digital Editions.
We have documented the steps to resolve this error message. Please do
refer to this TechNote:
Error: "Adobe DRM Error" when you activate Digital Editions or access an
eBook
http://www.adobe.com/go/kb402747

Oracle VM on Linux - Unexpected Error during logon

Hi All ,
I am trying to start my OVM. The ovm status is shown as running but I am unable to connect as I get the following error :
Unexpected err during login ( com.oracle.om.mgr.api.exception.FailedOperationException: OVMAPI_6000E Internal Error : Connection refused Connection refused.
In the log files I find that admin is denied access and for the ovm_console it says incorrect username or password. .
connection refused.
I have done the below:
using : ovm_admin
     - Reset the password for OVS schema
     - Reset the admin user password
     - Unlocked the admin user.
ssh -l admin -p 54321 locahost give error connection refused.
Can anyone help
Thanks & Regards

Hi All ,
I am trying to start my OVM. The ovm status is shown as running but I am unable to connect as I get the following error :
Unexpected err during login ( com.oracle.om.mgr.api.exception.FailedOperationException: OVMAPI_6000E Internal Error : Connection refused Connection refused.
In the log files I find that admin is denied access and for the ovm_console it says incorrect username or password. .
connection refused.
I have done the below:
using : ovm_admin
     - Reset the password for OVS schema
     - Reset the admin user password
     - Unlocked the admin user.
ssh -l admin -p 54321 locahost give error connection refused.
Can anyone help
Thanks & Regards

SAP BPC installation - Errors during setup in the create database step

Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
first error pop-up:
Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
second error pop-up:
System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
After the SAP BPC setup:
- in the SQL Database Engine the ApShell database was created
- nothing for ApShell was created in Analysis Sever
- in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change.
At this point I checked these two topics on this forum:
Mulit-Server Install - Installation fails while creating AppServer Database
Problem during BPC installation
1) At first I tryied this solution:
Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
but nothing change: the "SAP BPC setup" problem I have still persists.
2) Then I tryed this workaround:
If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
but the "restore database" fails > I've got the error written in red: OLAP database - fail
What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
Thanx very much in advance for your kindness if you can help me.

Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
- SQL server is EE.
- I installed SQL server (including SSAS) using MyDomain\MyUser.
- MyDomain\MyUser is windows administrator on both servers.
- MyDomain\MyUser is SQL Server and SSAS administrator.
- SSAS service is running under the same service account than the SQL Service.
- All my MSSQL services runs as Local System.
- I'm installing SAP BPC using MyDomain\MyUser.
- I also checked the SSAS service account specific rights to the SSAS data folders.
SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
In the database server, windows event viewer errors after the unsuccessful installation are:
1) SOURCE: MSSQLSERVER
Failure Audit: Login failed for user MyDomain\MyUser
2) SOURCE: MSSQLSERVER
BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
For point 2:
I tried 4 differents SAP BPC installations as follows:
- to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
- to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
- to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
- to don't go into advance options and to don't specify the path.
but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
I don't know how to solve it.
Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM

Unexpected Error during get latest

I support RoboHelp and RoboSource for a couple people in my
company. One of them recently has been having issues while
performing a get latest on all the files when RoboHelp initially
starts up. In the middle of the get latest an error message pops up
"Unexpecte Error: please contact the system administrator." When
she clicks okay the get latest stops midstream, without getting
many of the files. I am the system administrator and have no idea
what the issue is. I made sure all the files from both of the
client computers were checked in properly. And still the error.
Just as a side note, we are still on RoboHelp X5 and the help
system we have created is rather large.
Any ideas would be greatly appreciated.
Seth

Hi Seth,
this error message is extremely helpful, isn't it? ;-)
It can have any number of reasons, but in my experience the
most probaböe ones are:
- The project has been added to RSC by importing the
respective folders using RoboSource Control Explorer instead of
using the Add to Version Control command from within RoboHelp
Office. Therefore, the database contains several files which must
not be there. Look for the project's cbd-file in the database; if
it's there, this will be the cause.
- The database is corrupt. Stop the RoboSource service on the
server and run a jetcomp over the database.
If the problem persists, please ask again; I'm under a slight
time pressure right now.
---Dirk Bock

E1550 - Error code 82BD0119, Cisco Connect gives connection timeout error during setup

During setup, after 90% completion I get "adapter connection timeout period expired". I'm unable to configure my router.
I downloaded the lates Cisco Connect software and tried that as well but I get the same problem.
Operating System : Windows Vista Home Premium SP1 (32 bit).
Any help will be apreciated. Thanks.

I believe you have a static IP address assigned in the computer. Here are the steps to check for the wireless:
~~ Go to Wireless network connection properties.
~~ Click On Internet protocol TCP/IP and go to properties.
~~ Select 'Obtain IP address automatically' and 'Obtain DNS server automatically'.
~~ Click OK and then close.
Check for the Local Area Connection as well in the same procedure.
Then uninstall the existing Cisco connect software, reset the router.
Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
After performing the following steps install the Cisco connect again and check the status.

Unexpected error during setup

Similar Messages

Maybe you are looking for