Unexpected error from the Operating System
Hello everyone. I have a PCI 1200 board and I use LabWindows/CVI. I want to
make a scan on an analog input channel of my board. For this, I tried the
functions Lab_ISCAN_Op, nidaqAIScanOp and DAQ_Op, and for all of them, the
same error occurs, which is:
return value == -10856
with the message:
osError: An unexpected error occured from the operating system while performing
the given operation.
Any hints for me?
Thanks in advance.
Yves
I have similar problem with Error code= --10452 (noIntAvailError: No
interrupt level is available for use) when I used the Dap_Op() function.
After checking the system's resources (from Control Panel -> System and
click on properties to get the system resources used by my Lab-PC-1200 card.
Win98 has plug and play and so it shows me only the I/O ranges. I forced
the system to allow the Lab-PC card to use IRQ=3 and DMA=5. This resolve my
problem and no more Daq_Op() error messages. I hope this will help. Jack
Sent via Deja.com http://www.deja.com/
Before you buy.
Similar Messages
-
Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
I don't know if the bug exists in the program or the "Creative Cloud.
Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?Entering the serial number is probably part of the registration process.
Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted? -
Database version and patchset applied from the operating system level in so
How to find out the database version and patchset applied from the operating system level in solaris?
[oracle@rac1 udump]$ cd $ORACLE_HOME/OPatch/
[oracle@rac1 OPatch]$ pwd
/u01/app/oracle/product/10.2.0/db_1/OPatch
[oracle@rac1 OPatch]$ export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
[oracle@rac1 OPatch]$ ./opatch lsinventory
Invoking OPatch 10.2.0.1.0
Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0/db_1
Central Inventory : /u01/app/oracle/oraInventory
from : /u01/app/oracle/product/10.2.0/db_1/oraInst.loc
OPatch version : 10.2.0.1.0
OUI version : 10.2.0.1.0
OUI location : /u01/app/oracle/product/10.2
Edited by: rajeysh on Jul 31, 2010 1:19 AM -
Hello I hope someone can help as i am very upset my BB10 is not functioning.
I have had this handset 3 months & love it!
I updated the OS and now on 10.1.0.4181... I had to do a memory swipe as handset working fine until update then it would not make or receive calls hence the swipe also cleaned up emails etc.
Now when I come to add the email accounts which it allows but no emails are received.. I keep getting this
message 'there was an unexpected error and the operation was cancelled.'
I used to have 2 x virgin media email addresses, 1 x hotmail.co.uk & 1 x [email protected] email address linked to Z10
handset and worked perfect..
What has happened to my phone.. I so need it to operate as before as I use it for work (self employed)
On the settings the virgin emails will sometimes say not connected.
I can use the internet & apps ok & text.. but I love the hub and that is not working like it did...
Can someone please help & advise before I send it to a watery grave...ThanksThanks for the reply
Can I get you to manually add the live.co.uk email account by changing the incoming mail server to one of these servers: blu-m.hotmail.com, dub-m.hotmail.com, stn-m.hotmail.com, bay-m.hotmail.com, col-m.hotmail.com or snt-m.hotmail.com.
Then try to add it, let me know if the issue persists.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
BE3.5 : Error from the source system while activating the transfer rule
When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
ArunabhaHi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers! -
Removing OS9 from the operating system
My emac is running 10.3.9. I have a 1 GHz power PC G4. I have a 1GB Sdram with a 60 Gb hard drive that only has 5.5 Gb left of usable space. Can I remove the 2 folders in the mac hard drive that contain
the desktop OS9 and applications OS9 without causing major problems? I need to free up more space so the computer will work faster and I can upgrade the system software to a least 10.4.11. Any suggestions please? JuliaMy OS9 system folder is only ~250MB. Unless your OS9 applications folder is really stuffed, I don't think you'd gain much by removing either. You need to free up several gig and I imagine that evicting the OS9 stuff would gain you less than a gig.
It's more likely that some other folder is hogging your space. Look at this article:
http://thexlab.com/faqs/freeingspace.html
for suggestions on finding what's taking up space and what can be safely removed. -
How can i use the gui of the operating system
hi
i am working with the gui and i want to ask how can the gui of the java be like the operating system..
ex : i want the buttons and the frame be like the windows xp .. not appear as default..i read the UIManager and i found more methods that getting the font the dimension but i want that when i drag and drop the code already inherent the gui (the shape of the buttons , frame and tool bar from the operating system)
ex : i working with windows xp, i want the shape of the gui of the frame that i drag and drop it be like the gui of xp) -
When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.
Some other things to look at.
https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50 -
Why Microsoft doesn't have correct fix to run automatically. How many years we need to cry with same error again n again?
Does any one have correct solution which will fix permanently while running more than 4000 systems in our environment
Manual stuff isn't easy. Pls provide permanent fix?
MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.This isn't a bug to fix. This is by design. Clients must be approved to be managed. Thus, only your configuration or expectations must be fixed. To correct your configuration, see the link Henrik posted. To correct your expectations, read the content linked
by Henrik.
Jason | http://blog.configmgrftw.com -
The operating system returned error 23(Data error (cyclic redundancy check).)
My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823). The step failed.
Thanks
RehaanKhan. MDBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
For crying out loud! Don't you have any shame!
There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
Erland Sommarskog, SQL Server MVP, [email protected]
Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
front end application happening as usual. Please help on this.
RehaanKhan. M -
What version of iPhoto. iPhoto 11 9.4.3 (720.91)
What version of the Operating System. OSX 10.8.3
Detail. I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are downloaded. But they are not. They can't be.
I fixed the problem somewhat myself by removing the miniSD and manually inserting it. It did not populate automatically. I had to open iPhoto and then it populated only the most recent photos I had taken which fortunately were the only ones I need. No error messages this seems to be a new occurrence.
Is there a way to just turn iPhoto off and download my photos to the folder of my own choosing?Sure - in the iPhoto prefercences set action when a camera is ocnnected to Image Capture
LN
Note - your cute formatting really does not add anything and makes your post hard to read and follow - try straight typing with no cute formatting in the future -
BDD 2007 -- ZTI -- OSD error "The Operating System Installation Failed Unspecified Error (80004005)
Hi there
Wonder if anyone can advise me on a BDD 2007 OS deployment issue? (Apologies if this is in the wrong forum, I couldn't see a forum for BDD 2007.)
First of all, this BDD 2007 server and the OSD config was not done by me. For info, it is part of a SMS 2003 infrastructure.
I am trying to get the XP Pro build process working. I am led to believe the config has been completed.
Unfortunately, after booting the pc from the nic, I get an error. This is the order:
- the 'Initializing Windows PE' splash appears for perhaps 15 seconds
- very briefly, the text changes to 'Initializing Network'
- for a second or two only 'Initializing Windows PE' appears again
- then this error message appears:
"SMS Operating System Deployment - The Operating System Installation failed. Please contact your system administrator for assistance. Unspecified Error (80004005)"
I've spent some time looking into this error (80004005) and from what I can gather it possibly means 'access denied'.
I'm assuming after Windows PE loads the first Task Sequence begins, and if this possibly is where the issue lies?
One thing I cannot understand - the first Task Sequence (Initialization) has this command line (as do most, with different .wsf file):
cscript.exe "%SCRIPTROOT%\ZTIGather.wsf" /localonly
However, I cannot access %SCRIPTROOT% at all, Windows says it can't find it. I can run other variables such as %USERPROFILE%, %SYSTEMROOT%, etc, but cannot open %SCRIPTROOT%.
Is it simply the case that I should create a new system variable (that has not been created by whoever built the server)?
Thanks
John HenrySince no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.
Hi Tom,
Looks like we have problem here as we see another blank post from you here. It's probably something to do with your email. Let me send you a PM with my email address and we can communicate that way.
Thanks,
Kevin -
When the keyboard is unplugged I get "Error 1962: No Operating system found."
I have a new Lenovo ThinkServer TS130 1105B2U. It has a Core i3-3220 and 4GB of memory. SATA 0 and SATA 1 each have a 250GB HDD configured to mirror each other using RAID1. I just finished installing Windows 7 Pro and drivers. However, I have discovered that when I try to reboot the machine with my USB keyboard disconnected I get "Error 1962: No operating system found. Press any key to repeat boot sequence." When I reconnect the USB keyboard and reboot the machine, Windows 7 Pro boots like expected. Why can't it find the operating system if the keyboard is unplugged?
This is fixed in BIOS version 20B.
You can use the following link to update BIOS from witin Windows.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/bios_ts130_51a20b.exe
The Readme is:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/ts130_51a20b_windows.txt -
Error message from the source system, Caller 09 contains an error message.
Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....Caller 09 is a very common issue - please search the forums before posting....
Arun
Maybe you are looking for
-
How can I get videos to play in playlists on my ipod touch ios6?
I have an iPod Touch that used to have ios5.1 in it but I upgraded it to ios6. Since upgrading, the ability to play vidoes in Playlists in iTunes, seems to have disappeared! I still have one iPod Touch with ios5.1 and it still works fine this way but
-
I just purchased a new hard drive. I currently use Time Machine to back everything up. Can I use this clone my new drive or should I use another program. Also my current drive has a partiton for Windows but it's not big enough. I would like to in
-
CSS....Format Tags Not Working Properly IN Fire Fox
Hi Folks, Setting up a External style sheet.... the h tags (h5 and 6) in this case are not letting the text align to top of the table in fire fox. When I preview in FF the text is one return down from the top and in IE it is at the top. When I take t
-
Trying to find a hdmi to component converter
Home theater only has component inputs
-
HT1535 so I've done all that and I still can't add a playlist I've created in iTunes to the iPod...?
I've followed the instructions to tell the iPod that I want to manage music and video manually, but I still can't add a playlist I've created in iTunes to the iPod...