"Unexpected error occurred" message on Develop window

I get a message "unexpected error occurred" when I go to the "Develop" screen. I thought I had a bad card, so I used my second card to take a photo then import it. The same error message appeared on the "Develop" screen. I shut my computer down and rebooted it, but the same message occurred. I'm stumped. Any ideas what might be going on?

Are you running Lr 1.4? If so, uninstall and install the previous 1.3.1 release.

Similar Messages

'An unexpected error occurred' using AirPort Utility to configure an Extreme

Hi all, I've been fighting with this problem for a while. I have a 2011 Mac Mini running OS X 10.7.5 and AirPort Ulility 6.2. I also have a new-ish AirPort Extreme A1408. They've never really seemed to work properly together. The only way to configure the device is to manually launch the AirPort Utility, go "file > configure other" and enter the password "public" to log in and manually change the settings.
If I hard-reset (which I've been doing to troubleshoot another issue) and simply choose "Other AirPort Base Stations (1)" I can see my router in the drop-down. It goes through the process of gathering information and joining the default wireless network (I'm using the unsecured default right now as a matter of fact), but then the process ends with 'An unexpected error occurred'. Even with that message displayed, the default wi-fi connection stays up (clicking cancel kills the wi-fi connection immediately).
I can always go back through the "file > configure other" process and set it up manually, but then it never appears in the AirPort Utility as a connected base station - all I see is a green light for Internet and a "No configured base stations have been found" message.
Here's what I'm seeing in the Console:
13-05-25 11:12:27.000 PM kernel: MacAuthEvent en1 Auth result for: 20:c9:d0:20:4c:10 MAC AUTH succeeded
13-05-25 11:12:27.000 PM kernel: wlEvent: en1 en1 Link UP virtIf = 0
13-05-25 11:12:27.000 PM kernel: AirPort: Link Up on en1
13-05-25 11:12:27.000 PM kernel: en1: BSSID changed to 20:c9:d0:20:4c:10
13-05-25 11:12:27.889 PM configd: network configuration changed.
13-05-25 11:12:27.914 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
13-05-25 11:12:27.914 PM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2322 Bypassing probe on Apple Network 204c0f because signature is in the known good cache
13-05-25 11:12:27.915 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
13-05-25 11:12:27.923 PM configd: network configuration changed.
13-05-25 11:20:29.000 PM kernel: wlEvent: en1 en1 Link DOWN virtIf = 0
13-05-25 11:20:29.000 PM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
13-05-25 11:20:29.795 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-05-25 11:20:29.806 PM configd: network configuration changed.
Looks like after I open AirPort Utility, the connection to the default wireless network is established, the system goes to probe the base station, says "nope I know this guy already", then the process spits out the 'An unexpected error occurred' message, I click "cancel", and the link is dropped.
Does anyone know why my AirPort does this? Is it a network configuration setting somewhere in the Mac? I've had this thing for a while and of course decided to dive into the Apple ecosystem entirely dropping to a single Windows gaming rig, only to find that the special magic doesn't work for me

Read this please, before assuming your AirPort Extreme is broken. The links at the end will likely resolve your issues. First try to rollback your AirPort's firmware to 6.1.1, which should restore your Internet connectivity. If it does, but you'd rather have the most recent upgrade available, follow the steps given in the following links, 6.1.3 should work fine for you then.
After numerous attempts by apple IT reps to persuade me that my modem was somehow the cause of my AirPort Extreme broadcasted WiFi network suddenly losing connectivity after the 6.1.3update, I found the truth that helped me to correct my own problem, and successfully use 6.1.3 rather than the rolled back version 6.1 i had been forced to resort to.
If rolling back your Airport's firmware fixes your connectivity issue, or your dns server has been erased by the update to 6.1.3, I speculate that these links will help you out greatly.
It turned out, that this was A KNOWN ISSUE to Apple! With an actual fix Published by Apple themselves! They've just got it hidden away because they must have wanted to drive me to the brink of insanity. . Luckily for Apple I worked with an amazing rep *(Thelma) who at least acted as if she didn't think I was a crazy person. I found the fix on my own after 16 grueling, redundant and fruitless, hours of troubleshooting (time wasting) with "senior" Apple techs.
Let me tell you, 'I told you so' has never sounded so sweet. (Thelma) was ****** that no one in the company bothered to fill her in on this issue or solution and had her support send me a new AirPort just before I discovered the fix. After the discovery, she told me not to bother sending either back, and apologized for the run around that took up weeks of my life.
With out further ado and with thanks to Softpedia for posting the info-
http://news.softpedia.com/news/Airport-Time-Capsule-7-6-3-Affects-IPv6-Tunneling -328680.shtml
http://news.softpedia.com/news/Apple-Releases-Fix-for-IPv6-Tunnel-Error-Under-Ai rPort-7-6-3-331186.shtml
*name(s) changed to protect the competent
AirPort Extreme 802.11n (5th Gen), iOS 6.1.3
I have this question too (1) Reply Categories: Airport Extreme Tags: airport_extreme, firmware, airport, ipad, wifi, 4, router, extreme, multiple_devices, internet_access, update_error, dns_error, amber_light, no_dns, 6.1.1, roll_back, 6.1.3

Airport Express - "An Unexpected Error Occurred"

Airport Express A1264 (802.11n compliant), trying to set it up using OS X Mavericks (10.9.3) OR Snow Leopard (10.6.8).
I do a hard reset on the Airport Express by depressing the reset button and plugging it in. The Airport Setup utility recognizes that there is an Airport Express, I am able to connect to it and try to set up a new network by entering a password, network name, etc. In BOTH system versions the AE is updated and it says it's restarting, but that is it. The WiFi network name never appears and the connection times out - I get an "unexpected error occurred" message. The AE is not recognized again unless I reset it but that doesn't fix my problem.
What I've tried:
-Have already adjusted IPV6 to no effect.
-Unable to get the AE to join my existing WiFi network.
-Have tried to set up the AE with ethernet cable connected and disconnected.
Current setup is DSL line -> WiFi router/DSL modem -> AE
-> Mac desktop
-iPhone/iPad etc. via WiFi router
Any ideas? I'm pretty sure at this point it's a dud.

Power up the Express for a few minutes, and then hold in the reset button on the device for 10-12 seconds and release. Allow a full minute for the Express to restart.
Connect an Ethernet cable from one of the LAN <--> ports on the 2Wire gateway to the WAN "O" port on the AirPort Express
Open up AirPort Utility
Click on Other WiFi Devices
Click on AirPort Express
That will bring up a window that looks similar to the illustration below
Network Name........Type in a short, simple name for the wireless network
Base Station .......Type in a device name that you want to use to identify the Express
Password.......Type in a password that will be used for both the wireless network and device password
Verify the password
Click Next
When you see the message of Setup Complete, click Done
You should be able to log on to the new network and enter the password to connect

HT201250 i'm getting message: can't be opened because you don't have permission to see its contents. and he operation can't be completed because an unexpected error occurred (error code -8003).

I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
Any advise how to fix my problem?
thanks in advance

While you see a single trash can, in reality there are trash folders on each mounted volume. I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated. So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty. Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal. We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time). So launch Terminal (in utilities). You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
This first line is the only exception to the copy/pasting since you have to enter some information.
sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
where your-TM-volume-name is the name of your TM volume. That's the part you have to fill in since I don't know it.
When you hit return the sudo in that command will cause a prompt for your admin password. Enter it and hit return again. Note the password will not be shown as you type it. Post the results so I can tell you what to do next.
Note this ls command is not doing anything but listing the files in the TM's .Trashes folder. Remember I said each drive has it's own trash folder. .Trashes is it.

Windows Journal cannot open " ". An unexpected error occurred in Windows 7 Professional

I copied my Windows Journal Notes from a tablet with Windows XP Tablet PC edition onto my Windows 7 Computer. When I try to open a note from the pull down "look-in" menu within the Windows Journal program, I gives me the error
"Windows Journal Cannot open. An unexpected error occurred." I thought this was a problem with my computer, BUT have replicated this same error on every computer in Best Buy and other computer stores. This is not a problem with
my personal notes. This is a problem with the coding of the Windows Journal Software on Windows 7 and 8. It was also tested on a Vista computer with the same error.
Please, if someone knows how to fix this problem please let me know. I use Windows Journal exclusively on a tablet PC for my business and am afraid of upgrading from XP to Windows 7 or 8 unless I can see that the Win7 version of JOURNAL works properly
as the WinXP Tablet edition of Win Journal.
Note: I have tried recreating user profiles, sfc.exe, cleanboot, safe mode, chkdisk.... all failed. THE PROBLEM I BELIEVE IS THE ACTUAL CODE that is written for Windows Journal. ALL notes can be opend by hitting FILE-OPEN. However, if you
go to the "view recent notes" button and click on the "look-in" pull down menu within the Windows Journal program, you can not open the file through this. Because of the way I do my business, I need to look up various files quickly
and write notes after opening each note from the "look-in" pull down menu.
Please Help.

The problem seems to be that the "look-in" menu doesn't open the files which are located in the "Notes" folder. If I open the files through windows explorer in windows 7, the file opens into windows journal and appears in the look-in menu.
Another interesting thing occurs if you create an additional folder under my documents. I tested this on various computers in an electronic store: Windows Journal was working fine with the "look-in" menu; I was able to open various journal note
documents. Then, once I created another folder under My Documents and tried to open a journal note in that folder and then go back to the "notes" folder, I was able to replicate the same error message.
In short, it seems that once a new folder is created, the original folder "Notes" as well as the new folder, both do not allow for the files within them to be opened through the "look-in" menu. However, they may be opened from hitting FILE, then OPEN.
But, the "look-in" and Browse menu doesn't work.
Also, I looked in the Event Viewer and couldn't find anything in particular related to Win Journal. Please tell me what and where specifically to look in the Event Viewer --- I can't seem to find anything related to Windows Journal errors in the Event
Viewer.
Thank you.

The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message - while executing powershell command for sharepoint online site

" +The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message " OR sometimes
"The remote server returned an error: (503) Server Unavailable..Exception.Message"
Getting exception above when performing various operation (site coll creating, group creation, adding users to group) for sharepoint online (Office 365) site using powershell script.
I want to create 3500 site collections using PS script. In-between getting above exception so it will skip one site collection creating and working again. for eg. after creating 11 site coll, script will through above exception and so 12th site coll will
not be create but working fine from 13 and so on...

Remote server seems working to me...any additional check?
if problem with remote server then may be loop to create site provisioning should not start again..Right?
any idea?

When I try to move files from my mac (v10.8.5) to my external harddrive I get the error message The operation can't be completed because an unexpected error occurred (error code -50).

When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.

Some other things to look at.
https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50

I get this message "The operation can't be completed because an unexpected error occurred (error code -50)" when I try and add any files to my Time Capsule

I get this message "The operation can’t be completed because an unexpected error occurred (error code -50)" when I try and add or delete any files to my Time Capsule. It just started happening a week ago.

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Windows 8 - Right Click Network Connection Properties - An unexpected error occurred

Hi,
I'm encountering an issue with a relatively new Windows 8 Pro x64 install (Been running about a week).
When attempting to right click on the Network Connection and select "Properties", I receive the following error:
"An unexpected error occurred"
The error also occurs when trying to disable the adapter. The network connection DOES work though. I have received an IP from my DHCP router and have network/internet access.
I have tried the Windows XP/7 "fix":
1. Click Start, and then click Run.
2. In the Open box, type regsvr32 %systemroot%\system32\netshell.dll, and then click OK.
3. In the RegSvr32 dialog box, click OK.
Test to see if you can open the properties of the network connection in the Network Connections folder.
1. Click Start, and then click Run.
2. In the Open box, type regsvr32 %systemroot%\system32\ole32.dll, and then click OK.
3. In the RegSvr32 dialog box, click OK.
4. Restart the computer.
Both did NOT work. I have also attempted uninstalling and reinstalling the Network Driver. I have also tried "SFC /scannow".
Neither of these worked either.
Specs:
Windows 8 Pro x64 with all current windows updates
Xeon W3520 CPU
8GB generic kingstom RAM
EVGA X50 SLI LE Motherboard (PN: 141-BL-E757)
Crucial M4 128GB SSD Primary OS Drive
Hitachi 500GB Secondary Storage Drive
Note: C:\Users is remapped/linked to D: drive.

Note: C:\Users is remapped/linked to D: drive.
undo this and try again.
"A programmer is just a tool which converts caffeine into code"

I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

I have been trying to update iTunes 11.1.3 to 11.4 and the error message says "an unexpected error occured. iTunes cannot be installed. Anyone can help

I have been trying to update iTunes 11.1.3 (8) to 11.4 and the error message says "an unexpected error occured. iTunes cannot be installed". Anyone can help?
I have a Mac Book Pro with OS X 10.6.8

If your profile is correct you are using 10.6.8 Snow Leopard. The latest iTunes version for that OS is 11.3.1 If your profile is wrong and you have 10.9.5 Mavericks, then the iTunes version is 11.4. You cannot use Mavericks versions on Snow Leopard.

[Exchange-Online] [EWSMA] [C#] [Windows]: EWS - CreateAttachment problem - The underlying connection was closed: An unexpected error occurred on a send

Hello,
I have a problem with
ExchangeServiceBinding.CreateAttachment(...) method (EWS with Office 365)
When I try to add a small attachment (e.g. 5 MB), then the method works fine.
When I try to add a big attachment (e.g.
12 MB), then the following exception is thrown:
System.Net.WebException
The underlying connection was closed: An unexpected error occurred on a send.
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at C2EWS.Proxy.ExchangeServiceBinding.CreateAttachment(CreateAttachmentType CreateAttachment1) in d:\source\EWSProxyClasses.cs:line 1471
   at EWSRequest.Program.UploadAttachment(ExchangeServiceBinding esb, ItemIdType parentItemIdType) in d:\source\EWSRequest\Program.cs:line 90
   at EWSRequest.Program.Main(String[] args) in d:\source\EWSRequest\Program.cs:line 59
Inner exception:
System.IO.IOException
Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host.
    at System.Net.Sockets.NetworkStream.MultipleWrite(BufferOffsetSize[] buffers)
    at System.Net.Security._SslStream.StartWriting(SplitWritesState splitWrite, SplitWriteAsyncProtocolRequest asyncRequest)
    at System.Net.Security._SslStream.ProcessWrite(BufferOffsetSize[] buffers, SplitWriteAsyncProtocolRequest asyncRequest)
    at System.Net.TlsStream.MultipleWrite(BufferOffsetSize[] buffers)
    at System.Net.Connection.Write(ScatterGatherBuffers writeBuffer)
    at System.Net.ConnectStream.ResubmitWrite(ConnectStream oldStream, Boolean suppressWrite)
Inner exception:
  System.Net.Sockets.SocketException
  An existing connection was forcibly closed by the remote host
     at System.Net.Sockets.Socket.MultipleSend(BufferOffsetSize[] buffers, SocketFlags socketFlags)
     at System.Net.Sockets.NetworkStream.MultipleWrite(BufferOffsetSize[] buffers)
The C# code is the following:
private void UploadAttachment(ExchangeServiceBinding esb, ItemIdType parentItemIdType, string attachmentPath)
// File Attachment
FileAttachmentType fileAttach = new FileAttachmentType();
// Attachment details
byte[] bytes = System.IO.File.ReadAllBytes(attachmentPath);
fileAttach.Content = bytes;
fileAttach.IsInlineSpecified = false;
fileAttach.LastModifiedTimeSpecified = false;
fileAttach.Name = System.IO.Path.GetFileName(attachmentPath);
// Create Attachment
CreateAttachmentType reqCreateAttach = new CreateAttachmentType();
// Add parent Id
reqCreateAttach.ParentItemId = parentItemIdType;
// Add attachment to the query
reqCreateAttach.Attachments = new AttachmentType[1];
reqCreateAttach.Attachments[0] = fileAttach;
// Upload attachment
CreateAttachmentResponseType resp = esb.CreateAttachment(reqCreateAttach);
// Check response errors
CheckErrors(resp);
Could you advise a solution, please?
Robert

Hello,
The maximum size is rather not the problem in this case. As mentioned in my question above, I have a problem uploading messages with 12MB attachments to Office 365 via EWS. According
to the documentation you provided a link to, the message size limit in all plans of Office 365 is 25MB.
When we try the same request using slow network connection (1Mbit/s) there IS problem - we are NOT able to upload 12 MB attachments.
When we try the same request using faster network connection (10Mbit/s) there is NO problem - we are able to upload 12 MB attachments.
It seems like a kind of timeout - probably from Office365.
Is there a possibility to upload attachment in chunks?
Robert

I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

I am using a portable USB storage drive connected to my laptop. I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it? Thank you.

All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
Open the Terminal application in the Utilities folder. At the prompt enter:
sudo rm -rf
Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

I'm getting this error message, "An unexpected error occurred (error code -6584)" Does any know what this is?

I'm getting this error message, "An unexpected error occurred (error code -6584)" Does any know what this is?

I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

Run Disk Utility and try to verify/repair the drive to see if it reports and fixes anything.

"Unexpected error occurred" message on Develop window

Similar Messages

Maybe you are looking for