"Unexpected error performing command:bad argument #1 to 'lower' (string expected, got nil)"

When in the devil does Adobe plan to correct this major problem with the external editor in LR4?????

Here ?
http://labs.adobe.com/downloads/lightroom4-1.html

Similar Messages

  • Tethering Error: Unexpected error performing command (String expected, got nil)

    Hello, when I try to shoot tethered into lightroom using my Canon t3i, I get the following error when trying to connect: Unexpected error performing command: bad argument #1 to 'stringByAppendingPathComponent' (string expected, got nil)
    Any help with this problem would be greatly appreciated. I am using lightroom 5.2 64-bit.

    Here ?
    http://labs.adobe.com/downloads/lightroom4-1.html

  • An unexpected error during Command execution

    Hi,
    I am using Project Server 2007 SP 2 at the moment. One of our user keeps encountering this error "An unexpected error during Command execution" for a project file.  We tried to restore the earlier version of the plan using Administrative restore.
    But it only works as a temporary fix as the problem keeps reapprearing. Kindly help.

    Only SP2 for Project 2007? Probably not worth trying to debug, with 2007 it is almost essential to have SP3 and the very last cumulative update for Project pro and Server. 2007 was a very buggy version (they were forced to release at same time as Office
    2007 and it was too soon).
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • I have an error( REP-53053: Bad arguments for function call) in this code?somebody pls tell..

    declare
    repname varchar2(50);
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    begin
    repid := find_report_object('MKTRCON03_SUM_WAG11');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);      
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'spreadsheet');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'P_CLIENT='||:block4.CLIENT_CODE||' '||'P_MONTHNM='||:block4.MONTH_NM);
    v_rep := RUN_REPORT_OBJECT(repid);
    WEB.SHOW_DOCUMENT('http://iterp1:8889/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=rep_iterp1','_blank');
    end;

    What is the prototype of the function you're calling?
    void  Norm(uint8_t *Image, uint32_t width, uint32_t height, uint32_t Nx, uint32_t Ny, double *Norm);
    What does your LabVIEW code look like?
    Files attached. It simply reads in an image and calls the C library. This vi executes with a test-dummy dll that accepts the same inputs, and outputs a direct copy of the image; therefore, I can assume that the vi is fine and my inputs match the correct types.
    Are you using arrays? Is the DLL assuming that the caller allocates memory?
    Yes. I initialize two arrays in the calling vi and pass the pointer into the dll. Inside the dll, I dynamically allocate 2 arrays and deallocate them at the end of the function.
    I am sure that the arrays are initialized correctly in the code and the correct value and type are passed into the dll. I made sure of this by commenting out the real code, and writing a simple function to copy the original array into the the resulting array. The results were favorable and the array was successfully copied in the dll and the vi finished without errors, and with correct copied values in the resulting array.
    Is the DLL allocating memory for things like arrays that doesn't get released?
    Yes, I dynamically allocate arrays that are used inside the dll only. These do not get used by my calling vi, and as far as I know, they are effectively deallocated at the end of the function.
    Are you using the correct calling convention? 
    My dll is a .cpp file, but it is written as a C-callable function.
    Message Edited by Candice on 08-11-2009 09:52 AM
    Attachments:
    test driver for dll 2.1.vi ‏50 KB
    Pad an Image with Zeros subvi.vi ‏50 KB

  • After Uninstal of plugin there is error" Incorrect command line arguments"

    The installer must from sap business one
    how to solve this problem

    Hi
    This error comes when your add on is not partially uninstalled and for proper uninstalltion it is not finding the installer.exe in * C:\Program Files\SAP\SAP Business One\AddOns *
    This will not harn your add on.whenever this error come, do remove the specific add on folder in  * C:\Program Files\SAP\SAP Business One\AddOns * and also clear the %temp% folder then reinstall your addon.
    Regards
    Rupinder

  • Problem with command line argument files and quoted strings

    I'm trying to use the following custom tag:
    -tag com.me.Test.testTag:f:"My Test Tag"
    This works fine when sent straight to the command line, but if I put it in an argument file (@argfile) along with the rest of my command, I get the following error:
    javadoc: Illegal package name: "My Test Tag"
    Any idea why this is happening? If I use a one-word tag header and omit the quotes, javadoc runs with no problems. I'm using Sun's SDK 1.4.1.
    Thanks for your help!
    Linda Howard

    White space is treated a bit differently in an @argfile,
    to enable users to put packages or options on separate lines.
    You might try escaping the spaces:
    "My\ Test\ Tag"
    or using a non-breaking space:
    "My Test Tag"
    What operating system are you on?
    -Doug Kramer
    javadoc team

  • Bad argument #1 to "ipairs" error

    Hi,
    I use LR 2.1 on a Mac X 10.5.5.
    I've been getting this error message: an internal error has occured, bad argument #1 to 'ipairs' (table expected, got userdata) when I try to use the create slideshows button in the Collections Panel in the Slideshow Module.
    This happens mostly when I have reordered images to do the slideshow. The problem is intermittent, occurring about 95% of the time, so that I think it is fixed when it isn't. It occurs, though somewhat less frequently (maybe 85% of the time) if I have not reordered the images. It remains a major annoyance.
    BTW, sometimes I can (and sometimes I can not) reorder the images in the slideshow module. Sometimes only in the Library module.
    I have tried ALL that Adobe recommends both working with their tech support folks for hours and hours on the phone and by e-mail and on my own...
    I've replaced the preferences file (any number of times), I've created any number of new catalogs, I've tried creating a new administrator file, I've created a tiny catalogue and just imported a few images etc, etc, etc. Each time I think it's resolved it's not.
    Does anyone have any ideas about how to fix this or does anyone have any ideas for workarounds?
    thanks
    stephanie

    'IPAIRS' -Bad argument #1 ERROR UPDATE...
    I originally posted here on 11/23 and after lots of long conversations with the good folks at Adobe and being "bumped up" to higher level tech support there is good news and bad news and I'm not really sure which is which :-)
    The higher level tech support guy logged onto my computer, watched what I did (new catalog, safe mode, new admin file, 2 of adobe's images) and, after watching me, was able to recreate the error on his machine. I guess that's the bad news because the problem is now, clearly, not a bug that is in each of our hardware. Rather the bug is, as we were all figuring, in the program. It seems that the create web collection or create print collection or create slideshow collection, either on Mac or Windows, all give the same ipairs error.
    (Oh, the good news is that means that I don't have to reinstall my OS).
    Tech support's plan is to take this info to other people and at some point they'll decide whether to create a fix for the problem in the next, or later down the road, version of the program.
    I'm told that the best way for the fix to end up happening is for EVERYONE who is having this problem to go to www.adobe.com and file feedback or a bug report. Squeaky wheels get the oil, as they say.
    Stephanie

  • Command Line argument is not valid please verify the switch.......???

    hello frends
    We are currently getting this error.
    Command Line argument is not valid please verify the switch.
    The code used to send the mail is
    mail ="mailto:?subject="+escape(subject)+"&body="+escape(email);
    document.location = mail;
    return ;
    this is a javascript code to open outlook mail to send emails.
    the main problem is,when we write
    mailto:?subject=abc&body=uvwxyz......
    then we should be getting abc as subj and uvwxyz as the body..,and we r getting it....
    but when we include ""(double quotes ) in either the subject or the body..,it is showing the error line mentioned above.
    and if em using the html tags in the body part..,it's giving everything including the tags,which z not desired.
    kindly help me .....

    shikha6g wrote:
    i've thought..,you people are brainy enough to help me out in the javascript too...!!so..,i relied on this forum and have posted my problem,coz solving this thing was really imp for me.
    i din't knew,dat i'll get such circastic replys here.sorryTo me, being brainy implies that you are a smart thinker and good at problem solving. It doesn't mean that you know a language that you never learned.

  • Bridge CS4 Bad argument {LiveObject("Thumbnail").property(0)}

    Can anyone assist with resolving this error message? Bad argument {LiveObject("Thumbnail").property(0)}
    It happens after saving a Gallery.
    Using Windows 7 + Dreamweaver CS4
    Thank you

    Hi
    Can you provide more details to reproduce such error?
    e.g.
    1. launch bridge
    2. choose some files, in output mode, choose a template..
    3..etc
    thanks.

  • How to pass command line arguments to Web Start appclient?

    Hi,
    I would like to pass arguments to appclient, but "javaws" unable to do that.
    Do I have to overwrite the JNLP? I use Sun Appserver 9.0, it creates JNLP on the fly!!!
    Please help, thanx!
    MB

    Hi, MB.
    If you are talking about the automatic Java Web Start support for launching app clients in GlassFish, you can pass the equivalent of command line arguments using the query string of the URL you use to launch the app client.
    Briefly, use
    http://host:port/client-path?arg=first-arg&arg=second-arg& ...
    specifying the argument values in the order that you want them passed to the client.
    The GlassFish server will do the right thing and generates the correct JNLP so your arguments are passed to the app client.
    The GlassFish developer's guide http://glassfish.dev.java.net/nonav/javaee5/docs/AS91DG.pdf discusses this and all aspects of the Java Web Start support. You can also take a look at this blog entry http://blogs.sun.com/quinn/entry/command_line_arguments_and_properties that focuses on how to pass arguments.
    Since this technique deals with argument passing in the URL, it works no matter how you launch the app client: a URL in a browser, the javaws command, etc.
    - Tim

  • Inconsistent datatypes:expected - got - error in handling xml

    hi i am getting the error Error(45,12): PL/SQL: ORA-00932: inconsistent datatypes: expected - got - in this procedure
    i tried a lot and landed in confused state..
    create or replace
    PROCEDURE BT_CPE_XML_READ1 IS
    dest_clob CLOB;
    src_clob BFILE := BFILENAME('DOC_PATH', 'tester.xml');
    dst_offset number := 1 ;
    src_offset number := 1 ;
    lang_ctx number := DBMS_LOB.DEFAULT_LANG_CTX;
    warning number;
    ex number;
    v_cast xmltype;
    v_varchar varchar2(32767);
    BEGIN
    DBMS_LOB.CREATETEMPORARY(dest_clob,true);
    ex := dbms_lob.fileexists(src_clob);
    if ex = 1 then
    INSERT INTO test_clob(id, file_name, XML_FILE_COLUMN, timestamp)
    VALUES(1001, 'test.xml', empty_clob(), sysdate)
    RETURNING XML_FILE_COLUMN INTO dest_clob;
    DBMS_LOB.OPEN(src_clob, DBMS_LOB.LOB_READONLY);
    DBMS_LOB.LoadCLOBFromFile(
    DEST_LOB => dest_clob
    , SRC_BFILE => src_clob
    , AMOUNT => DBMS_LOB.GETLENGTH(src_clob)
    , DEST_OFFSET => dst_offset
    , SRC_OFFSET => src_offset
    , BFILE_CSID => DBMS_LOB.DEFAULT_CSID
    , LANG_CONTEXT => lang_ctx
    , WARNING => warning
    DBMS_OUTPUT.ENABLE(100000);
    DBMS_LOB.CLOSE(src_clob);
    COMMIT;
    DBMS_OUTPUT.PUT_LINE('Loaded XML File using DBMS_LOB.LoadCLOBFromFile: (ID=1001).');
    v_cast :=xmltype(dest_clob);
    --dbms_output.put_line(v_cast);
    select extractvalue(XML_FILE_COLUMN,'/modifyProductPortfolioRequest/ns1:stateCode') from test_clob;
    end if;
    END BT_CPE_XML_READ1;
    is there any other way to get the value(xml)from the clob column of a table

    I see two issues off a quick eye-ball of the code<br><br>
    #1) You insert an empty clob into your table, load a local variable with the XML from disk, and then query the table. You never insert the XML into the table so you are querying on an empty column in the table.<br><br>
    #2) extractValue allows a third parm which is the namespace string. Since your XPath contains ns1: you'll need to use the third parm

  • ERROR: -1639 INVALID COMMAND LINE ARGUMENT

    Trying to install software for Shuffle that Santa brought and get this error messsage...
    "Error: -1639 invalid command line argument. Consult the windows Installer SDK for detailed command line help."
    Install stops at this point.
    SOMEONE HELP... My kid is chomping at the bit !
    Thanks.

    Ok I'll do some more searching but I found something in the community forums.
    APPSearch can not return this data into a property, so instead, for some unspeakable reason, returns a value of Null, follwed by another Null. This means that the property is created, and populated with two null characters. Bad news if the property also happens to be a PUBLIC property. All public properties are passed as part of the command line sent in a stream to the background installer process by the Execute Action. Since this stream now contains a double null value in a property, the stream is prematurely terminated. This creates an invalid command line, and thus the 1639 error.
    This user solved it by using the MSi Cleanup installer util.
    EDIT: A little more info...
    This problem is almost impossible to detect through the MSI log files since our friends at Microsoft chose to limit the length of any line in the log. It is impossible to get a dump of the full command line that generates this error.
    EDIT2:Note that error 1639 only ocurrs when the install package is run from removable media. When the package is run from local storage, the behavior is far more obtuse. The background install process, failing to receive a complete command line, is forced to run as if there had been no UI session, which in turn causes the APPSearch action to run again as if the install was running in silent mode. This causes re-evaluation of all properties a second time, destroying the feature selections made in the UI session, and also forcing the install to run under user credentials instead of elevated, even though AdminUser, ALLUSERS and Privleged properties are set. This is a very serious error that causes total failure of the installation.

  • Error when running script to reset size - bad argument gettokenmanager

    Hello,
    I use RoboHelp HTML 8 (currently on 8.0.2.208) and have a project with a number of user interface images that are going to be translated. The translated images will likely be of different size, so I need to have a fast way of reseting all the image sizes in my project.
    I discovered Chasnikov's script "reset all images" on the thread:
    http://forums.adobe.com/message/2128583#2128583
    which seems just perfect for my situation.
    Not wanting to test this on my real project, I made a copy in a different location and tested out the script. The script ran for a while, but then abruptly ended with the following message:
    Bad argument getTokenManager
    In looking at the output window it seemed like it stopped in the middle of a topic after going through a number of topics. For my test situation, I only replaced a few graphics in a few topics and when I checked this limited sample, they all seemed to be correctly resized.
    However, my concern is that if I use this script in my real project, it won't actually resize all of the images.
    Any ideas why the script is terminating abruptly?
    By the way, I did find a similar question about this error message in the thread http://forums.adobe.com/message/2551147
    however, the solution to add the line msg(filepath); to the script resulted in another error -- RH did not recognize 'msg' as a valid command.
    Thanks, Rose

    Thanks Willam for the advice. In the meantime I realized that there was something wrong with my project--because the word count script also gave me the same error message -- so I ran it on another version of the project and it was just fine.
    There are two questions that your response brings to mind:
    1. How are you able to see the line numbers in the script?  When I edit the script, it opens in Notepad and I can't turn on line numbers. I have discovered, that if I have word wrap off, I can use Goto and specifiy a line number to go to.  Are you using a different text editor?
    2. The reset size script doesn't announce that it is finished.  It just seems to stop displaying things in the output window, but it doesn't give me a message to say it has finished.  Can you recommend some code I could add to the reset size script to output that it has finished processing sucessfully?
    Thanks in advance.
    Rose

  • Error while running aiaconfig.sh - The command line argument(s) "weblogicConfig"

    Hi.
    We are Configuring PIP on AIA 11.1.1.7 after installing AIA PIP release. we we run ./aiaconfig.sh we are getting below error message,
    $./aiaconfig.sh
    Starting Oracle Universal Installer...
    Checking swap space: must be greater than 500 MB.   Actual 169130 MB    Passed
    Checking monitor: must be configured to display at least 256 colors.    Actual 16777216    Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-11-20_04-11-10AM. Please wait ...adevaia                                                        @soa-odi-dev1:/u02/app/Oracle/Middleware/AIAHOME/bin$ [WARN ][jrockit] MaxPermSize=256m ignored: Not a valid opt                                                        ion for JRockit
    Log: /u01/app/oraInventory/logs/install2013-11-20_04-11-10AM.log
    The command line argument(s) "weblogicConfig" or the install mode specified is not valid.
    Copyright (c) 1999, 2011, Oracle and/or its affiliates. All rights reserved.
    Usage:
    config.sh [-mode] [-options] [(<CommandLineVariable=Value>)*]
    Where mode include:
    [Mode is a mandatory parameter. Only one mode can be specified.]
         -silent For silent mode operations, the inputs can be a response file or a list of
                  command line variable value pairs.
    Where options include:
         -help, --help, --usage
                  Displays above usage.
         -invPtrLoc <inventory pointer file>
                  Launches the installer with a custom inventory location. The invPtrLoc
                  should point to a file which contains the following information.
                  inventory_loc=<inventory_location>
                  inst_group=<group_name>
         -response, -responseFile <response file>
                  Specifies the response file and path to use.
         -jreLoc <location>
                  Path where Java Runtime Environment is installed. OUI cannot be run without
                  it.
         -logLevel <level>
                  To filter log messages that have a lesser priority level than <level>.
                  Valid options are: severe, warning, info, config, fine, finer, finest,
                  basic, general, detailed, trace. The use of basic, general, detailed, trace
                  is deprecated.
         -debug  For getting the debug information from OUI.
         -force  Allowing silent mode installation into a non-empty directory.
         -printdiskusage
                  Log debug information for disk usage.
         -printmemory
                  Path where Java Runtime Environment is installed. OUI cannot be run without
                  it.
         -printtime
                  Log debug information for time usage.
         -waitforcompletion
                  For windows. setup.exe will wait for completion instead of spawning the
                  java engine and exiting.
         -noconsole
                  For suppressing display of messages to console. Console is not allocated.
         -ignoreSysPrereqs
                  For ignoring the results of the system pre-requisite checks.
         -executeSysPrereqs
                  Execute system pre-requisite checks and exit.
         -paramFile <location of file>
                  Specify location of oraparam.ini file to be used by OUI.
         -novalidation
                  Disables the validations, can be invoked along with GUI or silent mode.
         -nodefaultinput
                  Disables the default computation of values (pre-populating of values when
                  screen is loaded) in GUI install.
         -nocheckForUpdates
                  To disable all updates checking
         -updatesDir
                  To specify the directory where latest updates are downloaded. This could be
                  used in disconnected mode.
    Command Line Variables Usage:
              Command line variables are specified using <name=value>; for example:
                  [ session: | session:compName: | session:compName:version: ]variableName=" valueOfVariable"]
              Installer variables are specified using:
                  varName=value
                  Ex: ORACLE_HOME=<value>
              OUI Session variables are specified using:
                  session:varName=value
                  Ex: session:VARIABLE_NAME=<value>
              OUI Component variables are specified using:
                  session:compInternalName:[Version:]varName
                  Ex 1: session:oracle.comp1:1.0.1:varName=<value>
                  Ex 2: session:oracle.comp1:varName=<value>
                  The lookup order is compInternalName:Version:varName, then compInternalName:varName
    do anyone had any idea on this.
    Thanks a lot,
    RR.

    try checking relevant environment variables like the CLASSPATH.... a major source of failures in Windows is when in the classpath there is a path containing SPACES.... also enabling some "debug" or "verbose" flag (not sure how to do it) would provide more insight...

  • The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message - while executing powershell command for sharepoint online site

    " +The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message " OR sometimes
    "The remote server returned an error: (503) Server Unavailable..Exception.Message"
    Getting exception above when performing various operation (site coll creating, group creation, adding users to group) for sharepoint online (Office 365) site using powershell script.
    I want to create 3500 site collections using PS script. In-between getting above exception so it will skip one site collection creating and working again. for eg. after creating 11 site coll, script will through above exception and so 12th site coll will
    not be create but working fine from 13 and so on...

    Remote server seems working to me...any additional check?
    if problem with remote server then may be loop to create site provisioning should not start again..Right?
    any idea?

Maybe you are looking for