Unexpected Failure:Error Initialising Loader. Please check the error log".

I am using Iplanet Enterprise Web Server 4.1 on Solaris 7. I am trying to create a collection to index a few files.I am getting the following error whenever i try to do so.."Unexpected Failure:Error Initialising Loader. Please check the error log". I can't see the Loader error log as this file is not being created.
I also had same error show up for reindexing an exisiting collection.
Any idea what might be wrong in my configuration ?

This appears to be a permissions problem. I do not know exactly what, but if you set the plugins/search directory and everything in it to world-writeable then the error goes away.
e.g.
chmod -R 777 /opt/netscape/server4/plugins/search

Similar Messages

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.

An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.
Somtimes it says it spam also......

The error message is being generated by your email provider's server. Best to ask them what they do not like about your messages and how to solve the problem.

When connecting to itools an error appears that please check the asccernity please check the itunes seetings

when connecting to itools an error appears that please check the asccernity please check the itunes seetings plz tell me to coonect it

when connecting to itools an error appears that please check the asccernity please check the itunes seetings plz tell me to coonect it
iPhone 4S, iOS 7.0.6

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

"Please check the agent -NAME parameter" error

I get the following error when trying to execute a simple ODI package. Before the process even starts running, I get the following message in a popup. I have tested the physical connection to the ODI agent successfully in the topology manager. This agent is running on a Windows 2003 server.
java.lang.Exception: Error during Session launching : Error during Session Preparation : You are trying to execute a session with an agent that is undefined in your repository. Please check the agent -NAME parameter.
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.r.ot.k(ot.java)
     at com.sunopsis.graphical.frame.a.ir.dB(ir.java)
     at com.sunopsis.graphical.frame.a.eu.actionPerformed(eu.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)

Silly me... The physical agent name in the topology manager wasn't the same as the name used by the Windows service - all set now

HT4972 Hi! I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.

Hi!
I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.

Disable the computer's firewall and antivirus during the download and update.

Error : Could not start the SSO service. Please check the configuration

Hi,
I am getting the above error when enabling the"Agent-Based Windows Single Sign-On with Active Directory (Kerberos0".
I already twice did the KTpass.Timing is perfect bet CAS and AD.Please look into this CAS LOG file and advice me the next step to solve this issue.
Thanks
swami

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

Network Error, Please Check The Network!

"Network Error, Please Check The Network!" - I get this error message on the bottom of my screen at least a few times a day when all of my service drops, not just data. I've seen my service go from full 4G coverage one second to absolutely nothing the next, without moving and outside. Sometimes it comes back after a minute or two, other times I have to shut the phone off and pull the battery. I thought it may have been the SIM card but I had that replaced and nothing has changed. I've seen other people describing similar things happening to them as well. I've brought it in 2 times in the last 2 weeks because it was getting unbearable and both times none of the reps could explain why this is happening. I'm wondering if I have a bad device or if this is a widespread issue, and if anyone had this issue and found a fix for it.

I was having this problem as well. Tried hard reset, Verizon messed with phone remotely, etc...Ended up sending me a replacement phone. You may have to go through the steps and let the problem not be fixed, but I would call the 800 number from a land line and get the ball rolling. Mine was also doing weird things like freezing up when I tried to make a call. It would never make it to the screen with the dialer. It would just freeze up and go to the home screen. It ran slow and lagged real bad as if it was deciding if it wanted to work or not. Regardless, Verizon was great and when the usual steps could not fix it they replaced it. Mine is a droid razr (original).

BW variable: Inconsistent in loading. please check use of deleted objects

Hi Experts,
I encountered an error and can not solve it following OSS note.
When I create a variable in query definition for an infoobject, it prompts an error dialog 'Inconsistent in loading. please check use of deleted objects'.
I checked the OSS notes 792779, there is a such description:
The variable existing in the table RSZGLOBV, but not existing in the tables RSZELTDIR or RSZCOMPDIR have inconsistent definition. These situation may return 2 different error messages. When a variable is missing in RSZELTDIR table (or in both together), an attempt to expand a list of variable under a corresponding InfoProvider or a list of text/formula variables will return a message 'Inconsistency in loading...'. All variables which are created for corresponding InfoProvider, text/formula variable are not available. When a variable is missing in the RSZCOMPDIR table only the error message is 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded' in Query Designer
But I checked these tables RSZGLOBV and RSZELTDIR and RSZCOMPDIR. I can find a variable for this infoobject, such as TC_SREG, in these tables. That is, this variable should be availbale in the query definition.
I don't know why.
My sap bw is 3.1, without the program 'ANALYZE_RSZ_TABLES'.
Many thanks for you help.

Hi,
While installing business content make grouping as Data Flow before and collection mode as 'Automatic'. Then expand the Tree in the tree you can see Info Object Catalogue. All installed and activated object will be in green (Active Mode). those will be normally unchecked to install anyway cross check and if found anything check deselect them. Go for Simulation Installation to identify unforeseen errors. Install the same and activate entire data-flow.
Hope your issue will be resolve
Thanks
BVR

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

First RFC call failed, config not loaded. Check the System landscape configuration.

Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.

Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Please check the below Cursor Procedure and correct that code Please

Hai Every One.
Please check the below code I have two issues in that code
1. Invalid cursor
2. Record must be enter
Please correct this code and send me pls its urgent.I cont understand where i done mistake
PROCEDURE fetch_detail_PROC IS
cursor c1 is select * from quota_mast where quota_mast.divn=:quota_mast.divn and quota_mast.QUOT_tyPE=:quota_mast.QUOT_tyPE and quota_mast.INQNO=:quota_mast.INQNO;
cursor c6 is select * from quota_det
where quota_det.divn=:quota_mast.divn AND quota_det.QUOT_TYPE=:quota_mast.QUOT_tyPE and quota_det.enq_num=:quota_mast.INQNO
ORDER BY quota_det.quot_no;
--cursor c5 is select * from acc_mst where cdp=:quota_mast.ccdp and divn=:quota_mast.divn;
--vn acc_mst%rowtype;
i quota_mast%rowtype;
detail1 quota_det%rowtype;
BEGIN
     GO_BLOCK('quota_mast');
for i in c1 LOOP
          :quota_mast.INQNO:=i.INQNO;
                    :quota_mast.DIVN:=i.DIVN;
               :quota_mast.QUOT_NO:=i.QUOT_NO;
                    :quota_mast.quot_type:=i.quot_type;
                    :quota_mast.CCDP:=i.CCDP;
                    select nm into :QUOTA_MAST.PARTY_NAME from acc_mst where acc_mst.DIVN=:QUOTA_MAST.DIVN AND acc_mst.cdp=:ccdp;
                    :quota_mast.pak_for:=i.pack_for_PER;
                    :quota_mast.exc_duty:=i.exc_duty_PER;
                    :quota_mast.vat:=i.vat_PER;
                    :quota_mast.cst:=i.cst_PER;
                    :quota_mast.wct:=i.wct_PER;
                    :quota_mast.ser_tax:=i.ser_tax_PER;
                    :quota_mast.insu:=i.insu_PER;
                    :quota_mast.tot_tax:=i.tot_tax;
                    :quota_mast.tot_val:=i.tot_val;
               :quota_mast.value:=i.value;
                              next_record;
end loop;
     first_record;
GO_BLOCK('quota_det');
               for detail1 in c6
          loop
                    :quota_det.quot_no:=detail1.quot_no;
          :quota_det.ENQ_NUM:=detail1.enq_num;
          :quota_det.item_code:=detail1.item_code;
          SELECT ITNM into :NM FROM itm_MST WHERE DIVN=:quota_mast.DIVN AND iCDP=:ITEM_CODE;
          :quota_det.price:=detail1.price;
          :quota_det.qty:=detail1.qty;
          :quota_det.DISC_PER:=detail1.DISC_PER;
               next_record;
END LOOP;
     first_record;
close c6;
--close c1;
exception
when others then
message(sqlerrm);
message(' ');
END;
Thank you..

Oracle Forms is closely tied to the database meaning you can base your data blocks on your tables and Forms will handle fetching the data. I agree with Christian, your tables lend themselves to using a master - detail configuration and if you need to filter your block then you can use the Data Block WHERE Clause property.
Please correct this code and send me pls its urgent.As to the urgency of your request, the forum is a community of "Volunteers." Enough said.
Regarding your code, I see a several potential problems.
First, how are your QUOTA_MAST and QUOTA_DET blocks synchronized? Are you using a block relationship? Are you using a combination of triggers to synchonize the QUOTA_DET block when you user navigates to a different record in the QUOTA_MAST block?
Second, your Procedure name is "Fetch_Detail_Proc" but you are also fetching Master data as well. What is the purpose of your procedure and where do you call this procedure?
Third, you're using SELECT * in your cursor queries. You should always explicitly name each column. What happens when your table changes and you need to search your code for a column that was dropped?
Fourth, your cursor queries are referencing the same data blocks you are fetching data to populate. This gives the impression that you already have data in your block. This doesn't make sense - could you explain what you are trying to accomplish?
Fifth, with respects to your code, the "Invalid Cursor" error (is this really the error you're getting?) is most likely caused by your explicit call to close the C1 cursor. As Andreas stated, when using a CURSOR FOR LOOP, the cursor is automatically opened, fetched and closed using this construct. There is no need to explicitly close the cursor, in fact - doing so will result in an invalid cursor error.
As to the "Record must be entered" error, is sounds like you have required items in your block or your QUOTA_MAST block is not synchronized with your QUOTA_DET block, so when you attempt to navigate to a different block or record within your the same block the navigation cursor can't move because you haven't entered data that is required.
Please tell us what you are attempting to do with this code so we can tell you if you are using the correct method.
Craig...

Unexpected Failure:Error Initialising Loader. Please check the error log".

Similar Messages

Maybe you are looking for