Unexpected Grid View behavior?

Hi All,
Here is a situation I came across, that was quite unexpected compared to the behaviour in iTunes 7.
Suppose I have a playlist with multiple artists/albums. I have this playlist in Grid View. I choose this playlist from the left side navigation tree and press the play button. This playlist is set to shuffle by songs. I expect it to play a song and jump to the next song. iTunes 8 would just keep playing the same songs in the first album listed in the Grid View and would not jump to any other.
http://img152.imageshack.us/img152/4726/itunes20080910191124oh2.jpg
In this screenshot above, it will keep the songs in "The Very Best Of". If I press Ctrl+L (show now playing) then it would show only the songs in this album. This quite explains why it doesn't play other songs.
To explain a bit more on what's happening:
If I go to List View the song now playing does not have the Now Playing icon:
http://img98.imageshack.us/img98/1113/itunes20080910191500vf3.jpg
Notice it is playing "Opa Opa" but in the List View, it doesn't show it.
This is because in Grid View if you play a song from the playlist, it has its own "virtual playlist"
http://img98.imageshack.us/img98/5269/itunes20080910191525wl1.png
Notice the now playing icon there.
Why is this the case?
I hope you guys understood what I was trying to explain.
Thanks in advance,
Mike

wow.
well i just found the solution to my problem. Well i found the cause, not a solution really. All this problem seems related to the fact that i had my albums sorted by Ratings. If i sort them back by artist, it's all good!!
This is really frustrating, come on, this isn't suppose to pass Q.A. tests.
Even more, if i sort them in descending order instead of ascending, it works, but i got my favorite albums on the bottom.. i guess it's a work around.
Now also.. why did they put ratings but no options to filter by ratings? and where are Smart Playlists? Go Itunes, be more Iphoto! :P
JF

Similar Messages

How to change enter key behavior in data grid view?

Greetings community
I have a simple problem. I have a table of several columns, and I want it to be editable without using a mouse. I want user to enter value in the first column, press enter key on keyboard, enter value in second column, press enter key,
and so on. I want data grid view to open another row only when all columns in the working row are populated. However, pressing the enter key causes opening new row whenever user presses the enter key.
I tried to set current cell of data grid view in CellValueChanged event , but it didn’t work. Actually, it really moves current cell where I want, but after that it moves it one row down.
I traced the execution of code, and counted CurrentCellChanged events to see what happens.
Does anyone know if there’s any way to suppress this behavior?
Thanks in advance

Greetings community
I have a simple problem. I have a table of several columns, and I want it to be editable without using a mouse. I want user to enter value in the first column, press enter key on keyboard, enter value in second column, press enter key,
and so on. I want data grid view to open another row only when all columns in the working row are populated. However, pressing the enter key causes opening new row whenever user presses the enter key.
I tried to set current cell of data grid view in CellValueChanged event , but it didn’t work. Actually, it really moves current cell where I want, but after that it moves it one row down.
I traced the execution of code, and counted CurrentCellChanged events to see what happens.
Does anyone know if there’s any way to suppress this behavior?
Thanks in advance
Hello,
It perhaps be better using Tab key which is exactly used for switch focus to the next cell instead of dealing with enter key.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Lightroom 5.5 grid view fails to load some images. These do load in develop, then re-appear in grid. Re-installed 5.4 (after deleting 5.5, then emptying trash in 10.9.5) and it now exhibits same behavior. Suggestions?

These same images fail to load in slideshows; "loading" appears without the image ever appearing. I can export these grayed-out images and retrieve the image content in the exported file. Not being able to see all images in grid view is an inconvenience for sure; e.g., I can't review all the contents of a collection before posting it. This behavior didn't occur until I upgraded to 5.5. Now it has migrated back into 5.4, despite having selected 5.5 and emptying trash before the re-install.

Whoa this is happening to me...

Grid View - Weird album behavior

Hi,
whenever i try to play an album throught the Grid View using the "play album" or "play" button (on album rollover), it plays the first song and stops.
Actually i realised that if i go inside the album(double-click), the album is sorted by song order, but inverted (last top). Even if i put it back to normal song order sorting, it oftens mess up and stop at the end of fist song. Then sometimes if i try another song ( say 3rd one ), it will skip to the previous (2nd). Like if it didn't understood my resorting.
Last, even if i put it back to standard song order sorting, go out to grid view and "play album" from there it does it again, inverting the sorting.
Looks like Grid View is acting strange.
I'm starting to think that's because i imported my library from my old Mac wich had an old Itunes.
any help?
Jeff

wow.
well i just found the solution to my problem. Well i found the cause, not a solution really. All this problem seems related to the fact that i had my albums sorted by Ratings. If i sort them back by artist, it's all good!!
This is really frustrating, come on, this isn't suppose to pass Q.A. tests.
Even more, if i sort them in descending order instead of ascending, it works, but i got my favorite albums on the bottom.. i guess it's a work around.
Now also.. why did they put ratings but no options to filter by ratings? and where are Smart Playlists? Go Itunes, be more Iphoto! :P
JF

Panel behavior in Loupe view seperate from Grid view

When I am in grid view I like to have the left navigation panel open. However when I am in Loupe view I like to have all panels closed. Please make it so that the panel view can be different between Grid and Loupe.
Thank you

" It is not that much extra work to hit the tab key." Perhaps not. But doing so changes the state of all panels not just the left panel. I would like finer control for loupe view.
You are right though, it is not a high priority matter. I can make due as it is now. I just want it the other way.
Thanks

Playing a playlist with multiple albums in Grid View in iTunes 8

Hi All,
Here is a situation I came across, that was quite unexpected compared to the behaviour in iTunes 7.
Suppose I have a playlist with multiple artists/albums. I have this playlist in Grid View. I choose this playlist from the left side navigation tree and press the play button. This playlist is set to shuffle by songs. I expect it to play a song and jump to the next song. iTunes 8 would just keep playing the same songs in the first album listed in the Grid View and would not jump to any other.
http://img152.imageshack.us/img152/4726/itunes20080910191124oh2.jpg
In this screenshot above, it will keep the songs in "The Very Best Of". If I press Ctrl+L (show now playing) then it would show only the songs in this album. This quite explains why it doesn't play other songs.
To explain a bit more on what's happening:
If I go to List View the song now playing does not have the Now Playing icon:
http://img98.imageshack.us/img98/1113/itunes20080910191500vf3.jpg
Notice it is playing "Opa Opa" but in the List View, it doesn't show it.
This is because in Grid View if you play a song from the playlist, it has its own "virtual playlist"
http://img98.imageshack.us/img98/5269/itunes20080910191525wl1.png
Notice the now playing icon there.
Why is this the case?
I hope you guys understood what I was trying to explain.

turingtest2: I had already done exactly what you described in the *"Missing Artist or Album not with others by same artist"* section of your article. But what I hadn't done was the advice you gave as the last sentence in this section...*"In addition if you change the Compilation status of tracks they may be temporarily treated as tracks from an Unknown Album, again things should resolve themselves if you close and reopen iTunes".* As soon as I closed and restarted iTunes, the Unknown Album with five tracks disappeared and the tracks were again displayed with the correct album.
Your article is a great read, even for people who understand iTunes...there is a lot of helpful advice there to have bookmarked just in case any of the other problems you address are ever encountered. Thanks for taking the time to compile it and share it iTunes users.

Can DataGrid have the grid view?

Hi,
I have two DataGrids that can drag-drop data between source_datagrid and target_datagrid by defining the dragEnter and dragDrop events.
DataGrid control has list-based view, is there a way to convert the DataGrid control to display the grid-view?
If I need to make another control for the grid-view display, can you point out the example that what controls to use?
and how to do the drag-drop from this grid-view control to dataGrid?
Thank you very much.

Instead of using a DataGrid, you could use a Tile or TileList component.
DataGrid does not have your desired behavior.
You could create a custom component that uses states to display data in a DataGrid or Tile/TileList and switch states as appropriate.
If this post answers your question or helps, please mark it as such. Thanks!
http://www.chikaradev.com
Adobe Flex Development and Support Services

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

How to get list data and bind to data table or Grid view in share point 2010 using j query

hi,
How to bind list data in to data table or grid view using Sp Services.
How to use sp services in share point 2010 lists and document library

Hi, You can use List service, SPServices and JQuery to get your requiement done-
See here for an sample implementation -
http://sympmarc.com/2013/02/26/spservices-stories-10-jqgrid-implementation-using-spservices-in-sharepoint/
http://www.codeproject.com/Articles/343934/jqGrid-Implementation-using-SpServices-in-SharePoi
Mark (creator of SPServices) has some good documentation on how to use SPServices-
http://spservices.codeplex.com/wikipage?title=%24().SPServices
SPServices Stories #7 – Example Uses of SPServices, JavaScript and SharePoint
http://sympmarc.com/2013/02/15/spservices-stories-7-example-uses-of-spservices-javascript-and-sharepoint/
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Why does iTunes grid view not remember default sort settings?

Hello,
I am using iTunes 8.1 and I like to use the Grid view (Artists). Using the Grid view and clicking on an artist to look at the albums, I like to sort the albums within using "Album by Year".
Once I have made this change, it sticks until I close iTunes, so I can go into any other artist from Grid view and the albums will be listed using "Album by Year" automatically.
When I restart iTunes and click on an artist in grid view, iTunes has reverted to sorting via the first column, the one with track numbers. I then have to manually click "Album by Year" to get it sorted again.
I was wondering if anyone else has had this issue and if there is a solution to it? This also happened in iTunes before I upgraded to 8.1.
Thanks

Unfortunately, I can't offer any solution because I'm experiencing the same kind of trouble. Please help us! It would be greatly appreciated.
Cheers,
-- D

Slow-to-load album covers in Grid View

I've encountered a problem for a while that I thought I might bring up...
Whenever I start iTunes, it defaults to Grid View, the only view I use when browsing iTunes. Now, I'm unsure if iTunes caches album art or not, but every time I boot it up and scroll down, all of my albums appear artless for half a second before slowly applying the album art. This makes scrolling down incredibly slow and clunky.
Once I fully scroll down, I can scroll smoothly all I want, but if I close iTunes, everything is clunky again. Any tips? Does iTunes not cache album art?

iTunes will need to load all of your artwork when using cover flow and grid view. There IS a cache folder in the Album Artwork folder of iTunes, but i don't know how effective that is.
However, if you are running a version earlier than 9.2, iTunes 9.2 runs cover flow and grid view A LOT faster than previous versions, since what it does is create thumbnail versions of your images for those views only, making those views operate a heck of a lot quicker.
I know 9.2 still has some bugs and some people may advise against it, but if you really want to see a boost of performance with grid view I'd recommend updating if you haven't already. Besides, for any bugs there, Apple will probably release fixes for them shortly.

Help! Where is the button to toggle Grid-View in Dreamweaver CC 2014.1?

Just downloaded the latest version last night, and now the grid-view button is gone, so if I want to re-size a fluid-element, I can't.
Help!

See changes in latest update
Dreamweaver Help | New features summary
Nancy O.

How can I compare two collections at the same time? (View two grid views)

I have two collections containing some of the same images. (My Nikon D70 did not put an end-of-file on some images. I recovered them into a different collection.) Now I want to display both collections side-by-side in grid view. I will select those images in the "recovered" collection that correspond to the bad images in the "main" collection, add the ratings etc, and move just these to another collection.
It is extremely frustrating to have to bounce back and forth between collections, remembering each image one by one and selecting it in the "recovered" collection. (The image names are not preserved in the "recovered" collection -- I have to go by what the image looks like.)
LightRoom allows me to compare photos in the compare view. I want to compare collections in two grid views.

CaptureTheLight,
you have ran into a situation when you have to compare two sets of images and now you're wondering how come Lightroom doesn't have such "obviously necessary" functionality? But you have to admit it, this is not such a common situation in a photographer's workflow recovers broken files and tries to compare them against themselves. I think it's a pretty specific feature you need. Still, Lightroom has enough powerful tools for editing and sorting images.
For example...
You could just put them all - "main" and "recovered" - into a single collection or into the Quick Collection. Label the entire "recovered" collection with, say, red and sort by capture time. Now you'll have everything side by side, ordered chronologically. The "recovered" images will stay next to the "main" images since their capture time will be the same, and they will also stand out since they have the red label.
Make the thumbnails bigger and set up the grid view so it tints the thumbnail cell are tinted with the label color. Now, you can go quickly through them visually checking labeled vs unlabeled.

File name not showing in grid view

I just upgraded to LR 5.4 and I noticed that now when I am in grid view, only the capture date and dimensions show on the image when I run my cursor over it. I used to get a quick pop-up with the file name, capture date & dimensions, so I can quickly see where I am in my numbering system. I have looked at the preferences and also in view, but it is not apparent to me where it went, plus I know I didn't change anything, intentionally.
BTW, I also upgraded to Mavericks OS on my iMac, but I hope that is not what is wrong. I know Adobe put out a bunch of "patches" for Bridge, etc. but I have already downloaded and updated all that.

When you are in Library module/Grid mode, the text that appears in the hovering action is controlled by the Info Overlay. The Info Overlay has three states: Off, Info 1 and Info 2.
Go to View>Loupe Overlay and put a check mark next to the Overlay you wish to be active and your hovering enabled text will change to match that text.

How can I add a new column to Grid view under Tests tab

I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised.
How can I add a new column to Grid view under Tests tab? Thanks Katherine

I don't think this is possible.
Regards,
Jamie

Unexpected Grid View behavior?

Similar Messages

Maybe you are looking for