Unexpected kernel mode trap wdf01000.sys

  HI I been facing this issue last couple of days its becouse while browzing the interner and BSNl model U 100 which is based in India . I goin to give you the whocrased report below here. Crash Dump Analysis
Crash dump directory: C:\WINDOWS\Minidump
Crash dumps are enabled on your computer.
On Sun 02-08-2015 03:41:17 GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\080215-24031-01.dmp
This was probably caused by the following module: wdf01000.sys (Wdf01000+0x316CA)
Bugcheck code: 0x1000007F (0x8, 0xFFFFD00022764130, 0xFFFFD0002277FFE0, 0xFFFFF801B14C86CA)
Error: UNEXPECTED_KERNEL_MODE_TRAP_M
file path: C:\WINDOWS\system32\drivers\wdf01000.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Kernel Mode Driver Framework Runtime
Bug check description: This indicates that a trap was generated by the Intel CPU and the kernel failed to catch this trap.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
  System Information (local)
computer name: VISAKH
windows version: Windows 8.1 , 6.3, build: 9600
windows dir: C:\WINDOWS
Hardware: HP 15 Notebook PC, Hewlett-Packard, 2212
CPU: GenuineIntel Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 6370975744 total
  Please help me to resolve this problem. Regards Visakh

Similar Messages

"Unexpected Kernel Mode Trap (Wdf01000.sys)" and a Blue Screen appearing frequently on my Windows 8.1 (64-bit) laptop and laptop restarting all of a sudden.

Hi I am Arka Dey. I am using a
Windows 8.1 64-bit single language Dell laptop. Recently I have installed an update to my Windows 8.1 (X-64) operating system from the "Windows Update" available in the "Control Panel" section of my laptop.
But from that very day when I installed the updates, my laptop started behaving weird sometimes.
The problem is while I am using my laptop, a
blue screen suddenly appears and it says, " Your PC has run into a problem and needs to be restarted." Along with it there is
written the following message: " You can later search for this online - Unexpected Kernel Mode Trap (Wdf01000.sys)".
After displaying this for a few seconds in the blue screen mode, my
laptop automatically restarts. This has been happening for sometime for the past few weeks. I do not understand the meaning of the message displayed in the blue screen and nor do I know the reason behind its occurrence. Please help me with
a solution to this irritating problem as I am not a student of computer related sciences and software technologies. Neither am I that tech savvy. So please do help me with a guide or set of instructions to solve this problem of mine. The detailed specifications
of my laptop are given as follows:-
System Information
OS Name Microsoft Windows 8.1 Single Language
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DELL
System Manufacturer Dell Inc.
System Model Inspiron 5521
System Type x64-based PC
System SKU Inspiron 5521
Processor Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Dell Inc. A11, 29-08-2013
SMBIOS Version 2.7
Embedded Controller Version 1.01
BIOS Mode UEFI
BaseBoard Manufacturer Dell Inc.
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Mobile
Secure Boot State On
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale India
Hardware Abstraction Layer Version = "6.3.9600.17031"
User Name DELL\Arka Dey
Time Zone India Standard Time
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.88 GB
Available Physical Memory 5.08 GB
Total Virtual Memory 15.9 GB
Available Virtual Memory 12.6 GB
Page File Space 8.00 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection Yes
N.B. : If you need more specifications about hardwares then I can send them to you in later messages. Please help me.

Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag

Unexpected kernel mode error trap (Ndu.sys)

I've been getting thus BSOD error "unexpected kernel mode trap (ndu.sys)" after
installing visual studio 2013 when in connect to the internet and open the browser. If the browser is not opened then it runs just fine even if the internet is connected.
The worst situation even makes my PC crash 5 times in an hour. Almost crazy.
I've read the related topic about upgrade my driver would solve the question. But I just
clean reinstall Windows 8.1 two days ago. Before that I was still using Windows 8.1, VS2013, older driver and patch, and never got BSOD before. Why newer and cleaner environments cause PC so much trouble? I don't get it and come seek for help.
Here is one of my BSOD dump file. Please check it.
https://dl.dropboxusercontent.com/u/62254866/072614-11859-01.rar
Thank you very much!

I suggest you start by doing a system file check. This one crash was Related to Ndu.sys Windows Network Data Usage Monitoring Driver from Microsoft Corporation
Please run a system file check (SFC)
All instructions are in our Wiki article below...
Should you have any questions please ask us.
System file check (SFC) Scan and Repair System Files
Wanikiya and Dyami--Team Zigzag

Signing kernel mode driver usbser.sys win 7.

Have signed a kernal-mode driver for our Windows 7 but when installed receive a code 39 error "driver possibly damaged or missing"
I am aware that it must be SHA1 for Windows 7 and this is indicated in the thumbprint, also have verified the signature which came out with no errors. (signtool verify )
My CA is Verisign.
Appreciate any help.
regards
JIm

The problem is related to the USBSER.SYS as I had the same problem with a clean PC.
I finally succeeded in installing the driver when I copied one of the existing USBSER.SYS from the host PC to the folder from where the .cat and inf files replacing the USBSER.SYS file that I used with the driver package.
I tried to install the driver on another win7 PC with the new USBSER.SYS file but initially failed, but then succeeded after copying an existing USBSER.SYS file from the new host PC to the installation folder.
I also had to delete the existing USBSER.SYS in the windows\system32\drivers folder prior to installation.
Doing a file seach on several win7 pc's there are several versions of USBSER.SYS in repositories and driver folders.
Questions I hope someone can answer.
Does anyone have any idea of which versions of USBSER.SYS one should use for the respective OS's?
The USBSER.SYS already exists in windows so why is it necessary for me to include a USBSER.SYS in the driver installation folder? Why doesn't just use the existing one installed with windows?
Has it something to do with my INF file that refers to the copying of the USBSER.SYS?
[DriverInstall.NTamd64]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.NTamd64
AddReg=DriverInstall.NTamd64.AddReg
[DriverCopyFiles.NTamd64]
usbser.sys,,,0x20
Thanks in advance.

Adobe Premier Pro CC Crashes PC with error DRIVER_IRQL_NOT_LESS_OR_EQUAL (wdf01000.sys)

i am a gamer on youtube and i use my all the time i recently did a full system upgrade exceot the ram and hardrive it working fine but then the harddrive became faulty and premier pro cc allways crashed when i opened it so i put a new 120gb ssd in installed
a new version of windows did all the driver updates and it worked fine untill i closed premier pro now im back to it crashes every time i open it and it crashes my pc i allways get this error message DRIVER_IRQL_NOT_LESS_OR_EQUAL (wdf01000.sys)
could someone please help because i really need my pc working again and i hate using my mac

Thanks.
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.
2: kd> .trap 0xffffd000fe1dc280
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=00000000c0000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80031ca470a rsp=ffffd000fe1dc410 rbp=00000000c0000001
r8=00000000c0000001 r9=0000000000000000 r10=0000000000000038
r11=ffffd000fe1dc4c0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
Wdf01000!FxRequest::CompleteInternal+0x4a:
fffff800`31ca470a 488b91b8000000 mov rdx,qword ptr [rcx+0B8h] ds:00000000`000000b8=????????????????
On the faulting instruction, there was a failure writing the contents of the
rdx register into the memory address pointed at by the sum of the
rcx register + 0B8h. This was brought upon by USBXHCI.sys.
1. Remove and replace avast! with Windows 8's built-in Windows Defender for temporary troubleshooting purposes as it's likely causing conflicts:
avast! removal -
http://www.avast.com/uninstall-utility
Windows Defender (how to turn on after removal)
A.
Navigate toControl Panel
(with icons). You can do this by hittingStart
> Search > Control Panel.
Once in Control Panel,
change the drop-down fromCategory
to
Large
and/or Small icons.
B.
Among the list of icons, find and click
Action Center.
C.
Assuming the removal of your prior antivirus software went properly, you will notice for both
Spyware and unwated software protection (important) and
Virus protection (important), it'll have a button labeled Turn on now. Click this button (it doesn't matter which, as Windows Defender serves as
both in Windows 8/8.1).
2. I am curious in regards to whether or not your Avstream drivers are causing a problem, as they are rather old:
2: kd> lmvm ElgatoGC658
start end module name
fffff800`34492000 fffff800`344a1000 ElgatoGC658 (deferred)
Image path: \SystemRoot\System32\Drivers\ElgatoGC658.sys
Image name: ElgatoGC658.sys
Timestamp: Wed Nov 09 02:39:12 2011
I would uninstall if no update is available.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Wdf01000.sys BSOD on shutdown after imaging

We have SCCM 2012 R2 and Dell. Using the latest combo drivers on Dell, imaging Win7 x86/x64.
I've been seeing BSOD on shutdown on almost all desktops/laptops. They don't BSOD every time, maybe 20-30% of the time on 5-10% of all desktops/laptops.
Dump is below.
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\katiecc\Downloads\e7440_111214-8330-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`0305f000 PsLoadedModuleList = 0xfffff800`032a2890
Debug session time: Wed Nov 12 13:49:33.070 2014 (UTC - 8:00)
System Uptime: 0 days 0:07:08.907
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff88000ec6cce, fffff8800a993308, fffff8800a992b60}
*** WARNING: Unable to verify timestamp for TeeDriverx64.sys
*** ERROR: Module load completed but symbols could not be loaded for TeeDriverx64.sys
Probably caused by : TeeDriverx64.sys ( TeeDriverx64+fc0d )
Followup: MachineOwner
3: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff88000ec6cce, The address that the exception occurred at
Arg3: fffff8800a993308, Exception Record Address
Arg4: fffff8800a992b60, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
Wdf01000!FxIoQueue::CancelForQueue+252
fffff880`00ec6cce 4c897038 mov qword ptr [rax+38h],r14
EXCEPTION_RECORD: fffff8800a993308 -- (.exr 0xfffff8800a993308)
ExceptionAddress: fffff88000ec6cce (Wdf01000!FxIoQueue::CancelForQueue+0x0000000000000252)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000001
Parameter[1]: 0000000000000038
Attempt to write to address 0000000000000038
CONTEXT: fffff8800a992b60 -- (.cxr 0xfffff8800a992b60;r)
rax=0000000000000000 rbx=fffffa800cb2de50 rcx=fffffa80109c1500
rdx=0000000075657500 rsi=0000000000000000 rdi=fffffa80109c14a0
rip=fffff88000ec6cce rsp=fffff8800a993540 rbp=fffffa8010a59d30
r8=0000000000001000 r9=fffff88000e45160 r10=000000000000000c
r11=0000000000000000 r12=fffff88000edad40 r13=0000000000000301
r14=0000000000000000 r15=0000000000000001
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
Wdf01000!FxIoQueue::CancelForQueue+0x252:
fffff880`00ec6cce 4c897038 mov qword ptr [rax+38h],r14 ds:002b:00000000`00000038=????????????????
Last set context:
rax=0000000000000000 rbx=fffffa800cb2de50 rcx=fffffa80109c1500
rdx=0000000075657500 rsi=0000000000000000 rdi=fffffa80109c14a0
rip=fffff88000ec6cce rsp=fffff8800a993540 rbp=fffffa8010a59d30
r8=0000000000001000 r9=fffff88000e45160 r10=000000000000000c
r11=0000000000000000 r12=fffff88000edad40 r13=0000000000000301
r14=0000000000000000 r15=0000000000000001
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
Wdf01000!FxIoQueue::CancelForQueue+0x252:
fffff880`00ec6cce 4c897038 mov qword ptr [rax+38h],r14 ds:002b:00000000`00000038=????????????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000001
EXCEPTION_PARAMETER2: 0000000000000038
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff8000330c100
GetUlongFromAddress: unable to read from fffff8000330c1c0
0000000000000038 Nonpaged pool
FOLLOWUP_IP:
TeeDriverx64+fc0d
fffff880`05117c0d ?? ???
BUGCHECK_STR: 0x7E
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffff88000ec665b to fffff88000ec6cce
STACK_TEXT:
fffff880`0a993540 fffff880`00ec665b : fffffa80`109c14a0 fffff880`0a993600 00000000`00000000 fffffa80`109c14a0 : Wdf01000!FxIoQueue::CancelForQueue+0x252
fffff880`0a9935b0 fffff880`00eb33d3 : 00000000`00000000 fffffa80`109c14a0 0000057f`ef63eb58 00000000`00001003 : Wdf01000!FxIoQueue::QueuePurge+0x28f
fffff880`0a993630 fffff880`05117c0d : fffffa80`109c14a0 fffffa80`109912d0 fffff880`0511c028 fffff880`0511c028 : Wdf01000!imp_WdfIoQueuePurge+0x10b
fffff880`0a993690 fffffa80`109c14a0 : fffffa80`109912d0 fffff880`0511c028 fffff880`0511c028 fffffa80`109901e0 : TeeDriverx64+0xfc0d
fffff880`0a993698 fffffa80`109912d0 : fffff880`0511c028 fffff880`0511c028 fffffa80`109901e0 fffff880`00e64e1a : 0xfffffa80`109c14a0
fffff880`0a9936a0 fffff880`0511c028 : fffff880`0511c028 fffffa80`109901e0 fffff880`00e64e1a fffffa80`109912d0 : 0xfffffa80`109912d0
fffff880`0a9936a8 fffff880`0511c028 : fffffa80`109901e0 fffff880`00e64e1a fffffa80`109912d0 fffff880`0510f0d8 : TeeDriverx64+0x14028
fffff880`0a9936b0 fffffa80`109901e0 : fffff880`00e64e1a fffffa80`109912d0 fffff880`0510f0d8 fffffa80`109912d0 : TeeDriverx64+0x14028
fffff880`0a9936b8 fffff880`00e64e1a : fffffa80`109912d0 fffff880`0510f0d8 fffffa80`109912d0 00000000`00000000 : 0xfffffa80`109901e0
fffff880`0a9936c0 fffff880`00e58288 : fffffa80`109901e0 00000000`00000000 00000000`00000005 fffff880`0a9937d8 : Wdf01000!FxPkgPnp::NotifyResourceObjectsDx+0x4a
fffff880`0a993730 fffff880`00e64e99 : 00000000`00000000 fffff880`0a9938b0 fffff880`00edb200 fffffa80`109901e0 : Wdf01000!FxPkgPnp::PowerGotoDxIoStopped+0x120
fffff880`0a993780 fffff880`00e5b0f8 : 00000000`0000031c fffff880`0a9938b0 00000000`ffff7fff fffffa80`109901e0 : Wdf01000!FxPkgPnp::PowerGotoDNotZeroIoStopped+0x9
fffff880`0a9937b0 fffff880`00e5ada6 : fffff880`00edb1c0 fffffa80`10990398 fffffa80`109901e0 fffffa80`109901e0 : Wdf01000!FxPkgPnp::PowerEnterNewState+0x1d8
fffff880`0a993910 fffff880`00e5b627 : 00000000`00000000 fffff880`0a9939f0 fffffa80`10990380 fffffa80`109901e0 : Wdf01000!FxPkgPnp::PowerProcessEventInner+0x13e
fffff880`0a993980 fffff880`00e65dd3 : 00000000`00000000 fffffa80`109901e0 00000000`00000000 00000000`00000000 : Wdf01000!FxPkgPnp::PowerProcessEvent+0x1b3
fffff880`0a993a20 fffff880`00e476f2 : 00000000`00000002 0000057f`ef66efd8 fffffa80`109a8bb0 fffffa80`12b46402 : Wdf01000!FxPkgFdo::DispatchDeviceSetPower+0x117
fffff880`0a993a70 fffff880`00e4679a : fffffa80`12b46410 fffffa80`12b46410 fffffa80`12b46410 00000000`00000000 : Wdf01000!FxPkgPnp::Dispatch+0x2aa
fffff880`0a993ad0 fffff880`00e46866 : fffffa80`12b46410 00000000`00000000 fffffa80`109a8bb0 fffffa80`109a8bb0 : Wdf01000!FxDevice::Dispatch+0x19a
fffff880`0a993b10 fffff800`031f0eb5 : 00000000`00000001 00000000`00000000 fffffa80`109a8bb0 fffffa80`12b464b8 : Wdf01000!FxDevice::DispatchWithLock+0xa6
fffff880`0a993b50 fffff800`0337073a : ffffffff`fa0a1f00 fffffa80`1235ab50 00000000`00000080 fffff8a0`00000002 : nt!PopIrpWorker+0x3c5
fffff880`0a993c00 fffff800`030c58e6 : fffff800`0324fe80 fffffa80`1235ab50 fffffa80`13004b50 fffffa80`13b9f010 : nt!PspSystemThreadStartup+0x5a
fffff880`0a993c40 00000000`00000000 : fffff880`0a994000 fffff880`0a98e000 fffff880`0a9932e0 00000000`00000000 : nt!KxStartSystemThread+0x16
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: TeeDriverx64+fc0d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: TeeDriverx64
IMAGE_NAME: TeeDriverx64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51d31e10
STACK_COMMAND: .cxr 0xfffff8800a992b60 ; kb
FAILURE_BUCKET_ID: X64_0x7E_TeeDriverx64+fc0d
BUCKET_ID: X64_0x7E_TeeDriverx64+fc0d
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x7e_teedriverx64+fc0d
FAILURE_ID_HASH: {c079e5d7-83f0-230c-5936-8e6123aa32cd}
Followup: MachineOwner

Hi,
>> *** WARNING: Unable to verify timestamp for TeeDriverx64.sys
>> *** ERROR: Module load completed but symbols could not be loaded for TeeDriverx64.sys
>> Probably caused by : TeeDriverx64.sys ( TeeDriverx64+fc0d )
I suspect the BSOD is caused by Intel(R) Management Engine Interface (c:\windows\system32\drivers\teedriverx64.sys).
Uninstall it and make sure TeeDriverx64.sys is deleted.
Restart machine several times.
After restart, windows will auto configure the appropriate native system driver.
Reference:
Please help keep getting BSOD aiming to wdf01000.sys error
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/please-help-keep-getting-bsod-aiming-to/1e5f7c9b-1dd3-4423-8dfb-37d4b37b995a
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Kernel Mode T

I have a a new PC that has suffered from the dreaded KErnel Mode Memory Trap since its build. New motherboard, memory, video card, cpu and even power supply. The only thng left is the Audigy 2 sound card. I like the sound from this card but cannot tolerate any longer the constant crashes. Does anyone know how to fix this issue?
I am running a P4 2.8Ghz
Asus motherboard (was an Intel)
2Gig of matched Ram (new 2nd replacement)
Windows 2000P Service Pack 4
Audigy 2 sound cardMessage Edited by foxr0 on 09-5-2005 :53 PM

2 things you can try.
Get latest Chipset drivers.
or
Get win XP pro sp2
You can also try to shut down all startup programmes, but I dont know if 2000 has msconfig. Though you may be able to go into the reg and delete startup keys in startupreg .

UNABLE or CAN NOT Install Printer, Windows 8 calls it a Kernel Mode Driver

Very similar to
this thread.
None of the provided solutions work. I wish I could get a screenshot, but this is a computer I was working on for a friend and won't be back there for a couple of days.
Things I have tried:
Download absolute latest Windows 8 x64 Driver from HP's website for the specific printer in question (hp laserjet pro color m251nw). Tried both "driver only" and "full installation" downloads.
Told Windows to use a driver from Windows Update.
There is no Citrix based application to uninstall anywhere on the computer.
The computer is Windows 8 "standard" - so using GPEdit to Disable "Disallow installation of kernel-mode printer drivers" was not an option (although I did use a
3rd party GPEditor to try to modify this setting anyway, to no avail).
I used Advanced Startup to boot without Driver Signature Verification.
Disabled Anti-Virus software to ensure it wasn't preventing installation.
I ensured the local user on the computer had full permissions to the Devices and Printers menu.
I tried to install everything using "Right Click / Run as Administrator"
I tried to install using both Windows 7 and XP SP3 Compatibility Modes.
I have ensured there are no files in the Print Spools folder (C:\Windows\System32\Spool\Printers\). and reset the print spooler.
I am able to ping the network printer and it prints test pages, I do not believe there to be a problem with the printer itself, just some strange setting causing me all of these problems.
HELP! I'm an IT Pro but I spent 3 hours on this and I'm not used to being utterly defeated!
Thanks in advance for any and all advice!!!!
Don't forget, if you find the help you need, click the "Propose as Answer" link at the bottom of the post containing the solution!
NuAngel.net

I wish I could get a screenshot
What are the chances of it being a bogus message? For that reason and others I would be running ProcMon to find, correlate and supplement any and all diagnostics which are being produced. Filter with Operation Is WriteFile. You
need to infer which WriteFile corresponds with which message but that is relatively easy because the Detail contains a close approximation to each message's length. In any case, you get to see all the files that were involved and easy access to
them.
Good luck
Robert Aldwinckle

Question about ASE 15.7 kernel mode – process vs threaded

Hi there,
This question is related to upgrading Sybase ASE Server
from version 15.5 to version 15.7 on Sun Solaris SPARC Operating System
(Solaris 10). For the upgrade, I need to choose between threaded kernel and
process kernel mode.
1> Is the process kernel mode in ASE 15.7 identical to
process kernel in ASE 15.5? Are there any changes to process kernel mode
between version 15.5 and 15.7? With all the other configurations on the Solaris
host being same (Number of CPUs, RAM, Storage, Sybase ASE Configuration
parameter values like total memory, engines), will the performance on ASE 15.7
in process kernel mode be same as on ASE 15.5?
If there are differences in performance, what are they? What should I be monitoring on ASE 15.7 to see
if there is performance issue on the ASE Server?
2> For the threaded kernel mode, are there any performance
overheads like more CPU usage? We are not planning to change the hardware
configuration of the Solaris host during the upgrade. What values should I be monitoring at the OS
level OR Sybase ASE level to make sure that there are no performance issues? Is
there any particular parameter that needs to be monitored closely when we
change to threaded kernel mode?
Are there any Sybase Configuration parameters that I need
to tune for the New threaded kernel mode? If so, do you have any performance
tuning tips (white papers, technical documents) for threaded kernel mode?
3> What is SAP Sybase recommendation on which Kernel mode I
should be using? I researched the SAP Knowledge Base articles for
recommendations on which Kernel mode to use and I could not find a definitive answer.
Thanks,
Raj

Actually with Solaris on SPARC, there is a very key consideration - you should be on ASE 15.7 sp50 or sp100 or higher AND have applied the kernel jumbo patch (Oracle BugID 16054425) from Solaris that fixes the issue in which they prohibited OS threads from issuing KAIO calls.   Then in ASE, you need to configure the 'solaris async i/o mode' parameter.
The changes between threaded and process mode kernels should be transparent to your application. Generally speaking, SAP recommends 'threaded' kernel mode - and specifically for SAP applications only certifies 'threaded' kernel mode.    For custom applications, you *could* use either - although, depending on how many engines you run and what chipset you are on, you might see better performance with one vs. the other - typically threaded kernel mode is better, although there are exceptions.
Generally, the main difference is that in process kernel mode, each engine did disk and network IO polling.   Due to OS security restrictions, this often meant that a engine had to process the disk IO in which it submitted...or for networking, your SPID had to run on your network engine for any network IO. In threaded mode, there is a single parent process with engine tasks (threads) and IO tasks (threads).   Consequently, for customers used to running in the 10's of engines, we suggest a starting point of reducing the number of engines by 2 to give the IO tasks CPU time.
One reason why threaded mode is often better is due to OS scheduling.   With hardware threaded cores, most OS dispatch schedulers do a better job of spreading the threads across the cores before utilizing the threads when a process is multi-threaded with POSIX threads - then a multi-process/kernel threaded implementation.   At one customer, we proved that we consistently got the best performance with threaded kernel and the only way we could match it with process kernel was to use OS cpu affinity to bind the ASE engine processes to individual cores.
However, one consideration is that older SPARC Niagara chips (T1-T4) were notoriously bad at network handling for some reason.   As a result, one of the recommendations for ASE on SPARC Niagara chips is to run the same number of network engines as the number of cores ASE is using.   One solution to that is in Solaris 11 (I think) where Solaris finally started being able to handle network interrupts better - I also think the T5/T6 are much better chips - but I have no customer experience data to go on there.

Larch "couldn't find kernel modules"/"unexpected kernel files"

Hey guys,
I'm using `larch` to build an Arch Linux live ISO. I made it through the Installation part, however I can't get through "Larchify" (whatever that means). Here's the log:
##Initializing larchify process
>>rm -f /home/Kiwi7/larch_build/.larch/system.sqf
>?0
>>rm -rf /home/Kiwi7/larch_build/.larch/larchify
>?0
>>mkdir -p /home/Kiwi7/larch_build/.larch/larchify/overlay
>?0
##Seeking kernel information
##(WARNING): More than one kernel found:
vmlinuz-linux-aufs_friendly
vmlinuz-linux
##(WARNING): No kernel version file (/home/Kiwi7/larch_build/etc/mkinitcpio.d/linux-aufs_friendly.kver)
##Unexpected kernel files at /home/Kiwi7/larch_build/lib/modules/extramodules-3.12-aufs_friendly
?>WARNING:
You seem to have installed a package containing modules
which aren't compatible with your kernel (see log).
Please check that this won't cause problems.
Maybe you need the corresponding package for your kernel?
Continue building?
??YES
#>Yes
##Unexpected kernel files at /home/Kiwi7/larch_build/lib/modules/extramodules-3.13-ARCH
?>WARNING:
You seem to have installed a package containing modules
which aren't compatible with your kernel (see log).
Please check that this won't cause problems.
Maybe you need the corresponding package for your kernel?
Continue building?
??YES
#>Yes
##(WARNING): More than one kernel module directory found:
3.12.6-1-aufs_friendly
3.13.4-1-ARCH
!>Couldn't find kernel modules
Please help me out.

Kiwi7 wrote:I can't get through "Larchify" (whatever that means).
Hmm... personally I would never run any command without understanding what it does, but it's your funeral, I guess.
Apart from that, are you sure larch is still compatible with Arch? It's nearly four years since the last update in the larch git repo, and as I'm sure you know, Arch changes frequently. I'd suggest you try to contact the developer directly.

Repeated Nvidia error on Vaio Z1 laptop: "Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered." Any thoughts?

I keep having my screen go black and then Win 7 pro gives me this error:
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered."
everything is fine after that.
happens 3 or 4 times a day.
'''doesn't '''seem to be on graphics or flash heavy sites.
driver is up to date and tried reloading driver.

I keep having my screen go black and then Win 7 pro gives me this error:
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered."
everything is fine after that.
happens 3 or 4 times a day.
'''doesn't '''seem to be on graphics or flash heavy sites.
driver is up to date and tried reloading driver.

AIX 5.1 (64-bit kernel mode) + JVM 1.3.1 (32-bit)?

We need to run Oracle 9.2 and WebLogic 7.0 on the same box running AIX
5.1. Since Oracle 9.2 is only available as a 64-bit app, we need to
run AIX 5.1 in 64-bit kernel mode.
IBM has released both a 32-bit and 64-bit JVM 1.3.1. Clearly, they
will run in the respective kernel modes, however, has anyone tried
running JVM 1.3.1 (32-bit) in AIX 5.1 (64-bit kernel mode)?? If yes,
what version (java -version printout) of JVM 1.3.1 and WebLogic did
you use?
We need to use the 32-bit JVM because WebLogic 7.0 contains some
32-bit libraries (e.g. Oracle JDriver).
Would apprecite any stories regarding success/failure.

I've tried and have not found a sucessful combination. I tried the JDK bundled
with 6.1sp2 as well as 1.3.1.10 and 1.3.1.11
sorry no help,
James
[email protected] (Len) wrote:
We need to run Oracle 9.2 and WebLogic 7.0 on the same box running AIX
5.1. Since Oracle 9.2 is only available as a 64-bit app, we need to
run AIX 5.1 in 64-bit kernel mode.
IBM has released both a 32-bit and 64-bit JVM 1.3.1. Clearly, they
will run in the respective kernel modes, however, has anyone tried
running JVM 1.3.1 (32-bit) in AIX 5.1 (64-bit kernel mode)?? If yes,
what version (java -version printout) of JVM 1.3.1 and WebLogic did
you use?
We need to use the 32-bit JVM because WebLogic 7.0 contains some
32-bit libraries (e.g. Oracle JDriver).
Would apprecite any stories regarding success/failure.

Error message on Satellite A200: Can't open ACPI ATK0100 Kernel Mode Driver

Hi,
I have Satellite A200 laptop
When i start the windows(vista) I get the following error: *"Can't open ACPI ATK0100 Kernel Mode Driver.* " !!
I've installed all drivers and the error remains.
I've installed all the drivers from the Toshiba website , but the issue remains.
Device manager shows me that every device is working properly.
Has anyone got an solution?
Thanks

ACPI is the power management facility for your Windows Operating system. If this is failing you may have to run a system recovery on your computer. You can do this with the hidden partition on your hard drive, however this will erase all of the data on your machine. If this doesn't solve the problem, you may have to consider getting your hard drive checked for bad sectors as this may have failed.
Hope this helps. :)

How do I find wether Solaris 8 is running in 32 bit or 64 bit kernel mode

I have some questions
1)Ho do I know wether solaris 8 is running in 32 bit kernel mode or 64 bit kernel mode.
2)Is there any way that we can switch between 32 bit and 64 bit without reinstalling the OS.?
3)Does the SunLink OSI 8.1.1 work with solaris 8(32 bit kernel mode) without any patch. If any patch required , can you tell me the patch that i need to install.
Thanking in anticipation

Hi,
To find out wheter 32 or 63-bit mode
# /usr/bin/isainfo -kv
Now, switching between modes
32-bit mode
# eeprom boot-file=kernel/unix
64-bit mode
# eeprom boot-file=kernel/sparcv9/unix
or OK prompt,
32-bits mode
boot kernel/unix
64-bit mode
boot kernel/sparcv9/unix
or even,
32-bit mode
setenv boot-file kernel/unix
64-bit-mode
setenv boot-file kernel/sparcv9/unix
Arrebola

Getting slice/volume size from kernel mode

Hi, my driver needs to be able to get a slice/volume size in LBs.
Until now, when I wanted to send IOCTLS in kernel mode I used the
cdev_ioctl function.
However I'v encountered some strange problems when using this
function for disksuite devices. The DIOCINFO IOCTL works fine, however
neither DKIOCGVTOC nor DKIOCGAPART worked. The rc is 0 but the buffers
contained random garabage. Does anyone have any idea what's wrong?
Further info:
1.On scsi or veritas volume manager devices these IOCTLS works fine, only on
devices controleld by the disksuite driver (md) am I encountering such problems.
2.The OS is solaris 8.
3.The IOCTLS work fine from user-mode for all devices types.
4.I am using cdev_ioctl as follows:
cdev_ioctl(hTargetDevice, /*The device dev_t*/
ioctlCode, /*Ioctl code*/
(intptr_t)pInputBuffer, /*The info structure*/
FKIOCTL|FREAD, /*Kernel ioctl*/
kcred, /*Root privileges*/
&ioctlRval);
Any help is appreciated.
ERAN

Hi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
Dave

Unexpected kernel mode trap wdf01000.sys

Similar Messages

Maybe you are looking for