Unexpected problem Can someone please HELP!
My main system in my sig. is the one i'm having a problem with. I decided to OC this system again since when I first got it I OCed it then. I went into the BIOS set the Spread spectrum to disabled, set AGP frequency to 66, set the HT to 800 and set Dram to manual and set ramclock to 166. Then I hit F10 to exit and save settings but it didn't even reboot to BIOS I had to use to jumper to reset the BIOS back to normal then it booted. Why is it that I can't even set the BIOS so that I can start to OC this sytem? Any ideas? Could it be because I have a Raid0 array installed? Would having 3x1024 be doing it? The #1 slot closest to the edge of the board doesn't work for some reason so I have the other slots filled with the same memory.
I am desperate now because I have OCed this system before with no problems. I just don't know what I am doing wrong because I didn't even start to OC the system all I did was setup the BIOS so that I could start the OCing process.
I'll have to try it and find out. I will post back later and let you know.
Something is wrong somewhere here and I'm not sure where it is. First of all when I try and run memtest with the memory in #1 slot with the corsair memory it doesn't run it just boots into my OS. But I have G.Skill DDR500 here that I am going to use for my new build so I just figured I would try it and I put 1 stick in the #1 slot and memtest ran. BUT it doesn't run with the Corsair in slot #1. I tested the corsair in #2 slot. PLUS I put all 4x1024 corsair memory in and checked in the BIOS and it only reads as 34?? as amount or memory.(Not sure of exact amount but it ws 34??.) Another thing I don't understand is that I have had the BIOS set up for Quick boot=enabled and Full Screen Logo=Enabled so that when the system boots all I had was the LOGO then it showed the raid arrays and booted into windows. NOW with the same settings it doesn't have the LOGO and it goes through a page of everything in the system then it boots to OS. Could the BIOS have gone bad some how? This is really starting to annoy me since it is all messed up for no reason. Can anyone give me some answers here since I really need some help about this MB?
Similar Messages
-
Major installation problem: can someone please help?
I bought a hp officejet 4215 all-in-one. I had isues from day one. In the end, the paper would never feed through properly, I always had to feed it manually. So finally they send me a replacement printer and I can't install it. Well actaully it doesn't install the main component. I get the following error message: The hard disk became full while installing the file "hp aio print"
1008:23,-34 The disk is full. However, I've got 21 gigs of free space.
I've spent over an hour on the phone with support. We've uninstalled and reinstalled, we've trashed all kinds of files and folders from the library directory and it just will not install this file, without which, the scan and copy features will not work. They tell me it's an issue with my hard drive but if so, why did it work okay with the original printer? The problem with the original printer was that it wouldn't feed paper properly. The fax, scan and copy features worked just fine. They say I need to contact Apple and have something done with the Twain data source manager, whatever that is. Does anyone have any ideas or suggestions?
iMac G3 Mac OS X (10.3.9)Okay guys, I figured it out myself. The installer was trying to install some components on my OS 9 partition when I got the disk full message. I freed up some HD space on the OS 9 partition and it installed just fine. Now why couldn't hp figure that out?
-
Display problem - can someone please help?
When I turn on my iPod, I'm greeted by a blank white screen (backlight on) or a white screen+zillions of blue lines. No proper display is seen. Repeatedly switching on/off and restoring haven't worked. I desperately need help!
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.
-
My safari keeps closing unexpectedly and when it does it tells me that it quite while using the .GameHouseBeachParty.so plugin. I have no idea what this means! Can someone please help me fix this?
You have the Flashback trojan.
Check out the replies in this thread for what to do;
https://discussions.apple.com/message/18114958#18114958 -
I updated my iPad mini to ios 7.0.2 couple days ago. Everything was fine until yesterday. I noticed that it seemed to have a mind of its own. It kept opening and closing app. I'm not sure what to don to fix this problem. I've tried restoring my iPad mini but that didn't help. Can someone please help me?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/ -
when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!
Try:
iOS: If you can't back up or restore from a backup in iTunes -
Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?
iphoto upgrading: Apple Support Communities
iphoto upgrade hangs: Apple Support Communities -
Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.
Thanks a lot for your great help...i made a quick example:
and what it's made of:
just shapes and gradients. used a combination of pathfinder and shape builder to get the shapes exact. -
I was using my SanDisk Cruzer 4GB today and I ran into problems. Can someone please help?!
When I was using my SanDisk Cruzer 4GB today I ran into some problems.
I was using it normally as I have been doing for 1 year and suddenly this message came up:
"Because your USB device is drawing too much power it has been disabled." Then my USB crashed...
I have tried plugging it back in, and it didn't work, I have tried Safe Boot-ing my computer, but still no result, nothing works.
When I plug my mouse into the same slot, but that does work. So do my USB headphones.
Can someone please help me, and don't suggest buying a new USB stick.
P.S. I need help A.S.A.P because I need to have a school project done and my work is on my SanDisk Cruzer 4GB.
LucasIt sounds like it is hosed. I hope you have a backup. The only thing I can suggest is to test it in a different computer.
This link is to a previous discussion regarding San disk Cruzer USB thumbdrives
https://discussions.apple.com/message/8700070#8700070 -
Hi, i had recently bought a toshiba 3.0, 1.5tb hdd and i had to change the settings through Disk Utility on my mac to be able to transfer files from my mac to my HDD. The problem i am having now is, it wont connect to my TV or PS3? Can someone please help
"....and i had to change the settings through Disk Utility on my mac to be able to transfer files from my mac to my HDD"
What do you mean by that? Did you format? -
I'm getting the run-around. Can someone please help me with a rebate problem?
I purchased a Samsung W/D from Best Buy with the free vacuum offer. It was delivered and I submitted my rebate request. The submission page said to wait 6 to 8 weeks for processing. I waited 8 weeks and then became concerned. When I called the rebate center they said they had no record of my submission. Obviously, the online process failed. I understand technology doesn't always work, but the operator and manager told me I would now not be able to get my rebate and only offered a mailing address to complain. I am EXTREMELY frustrated. First, because the only reason I purchased these units was for the rebate and now I cannot return them to Best Buy because of the time elapsed. Second, if I was aware that there was a problem with the submission I would have been able to fix the situation. The website said all was OK, and all the information said to wait 6-8 weeks. Why would I have checked in before that time? Now I'm told I'm too late to fix it??? All I want is the vacuum cleaner I was promised when I purchased the W/D. Can someone please help me?
Hello ChadMelton,
I have a hard time passing up offers for free products, so I understand how such an offer could influence your decision to buy. I'm wholly disappointed to read, though, that your rebate experience didn't go smoothly and that the manufacturer seems to have been less than cooperative. I would be frustrated too under such circumstances!
I was unable to locate your purchase using the information you provided when you signed up for Best Buy Unboxed. I would like to look into this situation on your behalf, but will need more information to begin. If you will please send me a private message that includes your full name, telephone number, order number and/or the Customer Service PIN from your purchase receipt, I'll get started.
I'm very grateful that you wrote to us with your concerns.
Sincerely, -
My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?
Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott -
Airport problems! can someone please help?
i've had an ibook G4 for several months now. it has been working perfectly with my belkin router up until the last month. it seems like i can rarely ever connect to the internet at home with airport like i normally would. and when i do mange to connect, it seems to go away after i open it from sleep. i've been using it at school more recently and i'm wondering if this has anything to do with it. i've tried messing around with the network settings but nothing seems to work. i have it set to connect automatically right now. i also installed adobe cs2 recently, but i can't imagine this would affect how airport works. i'm going crazy because i hate not being able to use it to get on the internet when i'm at home. can someone please help me?! thanks!
iBook G4 Mac OS X (10.4.5)Hi Aliciarules,
Welcome to Apple Discussions
You may want to look at this previous post. Have you created different locations (Changing the priority of your network connections?
You may want to look at...
Knowledge Base Document #106858, which is The Airport Troubleshooting Guide
Knowledge Base Document #58543 on Potential sources of interference
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight.. -
Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?
Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta
Maybe you are looking for
-
ITunes could not back up the iPod because the iPod disconnected
I had and solved a problem similar to the one reported by others: My iPod Touch 5 would not back up to iTunes. I was trying to update the iPod from iOS 8.1.3 to iOS 8.2 using iTunes on my PC and iTunes needed to back up the iPod before installing iOS
-
Why are apps taking so long to download/update in the app store?
Applications i am trying to download or update in the app store on my macbook air (OS X Yosemite 10.10.1) take days/weeks to load at least half on average. Why is this happening and how can i speed the downloads/updates up, it's frustrating.
-
Stretching of HTML table in JLabel
Hi all, I am trying to display an HTML table in a JLabel. The table uses width="100%", but the html table doesn't resize according to the size of the JLabel. Is this a know issue or am I doing something wrong? String html = "<html> <head> </head> <
-
KDE systemsettings causing freeze on x86_64 with nvidia
not sure where to post this, but i have been having a difficult time tracking down this problem. it only happens when i have effects enabled. when i try to access system settings it hangs the GUI. i can eventually get over to the command line and "k
-
Problem with quick printing multiple .pdfs from Outlook 2010
Hi there, I have a user who is having problems printing multiple .pdf's using the quick print function in Outlook. I have tried reader 9,10 and 11. 11 errors when printing (nothing specific in the error message) and only 1 or 2 documents are printed.