Unexplained black lines in embedded links.  only show up in print.

These lines are not showing up on the screen or on the screen PDF; only when printed.  Embedded all my links.  Not sure what to do. 

Yes, I am experiencing this as well.  Thin black vertical lines about 2.8cm apart.  Initially I thought they were just on things sent to the printer from Photoshop, but now I see them on colour items I print directly from the copier and on an email attachment from my iPad.  At times the lines are barely visible ant that is what happened when I was talking wiht hp support.  It looked as though the problem had been solved after reloading the software onto my iMac.  But afterI hung up with them it happened again and when I went back to look at the other prints the lines were there too but not very visible.  I have cleaned and aligned the heads and replaced an empty yellow cartridge.  I printed a blank white sheet that had no lines.  I cannot figure it out.  Any suggestions anyone?

Similar Messages

  • Some of my website images with embeded links only show the link with firefox, with IE8 the image appears correctly, why does this happen

    my website http://www.functionkey.net. If you view my homepage you will see that 3 of my images with embedded links only show up with the links. I am not using "_blank" in my code. The website was created using Microsoft Frontpage 2003.

    If you look at the page source then you will notice that there are some errors with (missing) closing tags.<br />
    Such errors shows as RED text.<br />
    You need to correct at least all codes marked as red text.
    The first &lt;a&gt; tag isn't closed here and you open a second &lt;a&gt;
    <pre>&lt;a target="_blank" border="0" href="http://www.win-rar.com"&gt;
    &lt;div align="left"&gt;
    &nbsp;&lt;/div&gt;
    &lt;div align="left"&gt;
    <u>&lt;a href="http://www.smartdraw.com"&gt;</u>
    &lt;img src="images/sd_logo.gif" width="256" height="111" border="1" alt="SmartDraw - The world's first Visual Processor (TM)" hspace="0"&gt;&lt;/a&gt;</pre>

  • TS3999 In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ event

    In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
    Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date?  i.e. more "user-friendly" presentation?
    Thx!
    [email protected]

    In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
    Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date?  i.e. more "user-friendly" presentation?
    Thx!
    [email protected]

  • Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

    I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
    I'm using Preview Version 7

    Hello @kgingeri1, 
    Welcome to the HP forums.
    If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
    If ePrint works fine, it is definitely a Google Cloud Print issue.
    Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
    Please call our Cloud Services at 855-785-2777.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Hours:
    Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
    Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
    Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
    Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • My ipod all of a sudden blacked out and now it only shows the apple icon. When i press the on/off or home button it still remains with the apple icon. I tried plugging it to my lap top and going to i tunes but it says there is an error in the device

    I was looking through my pictures and when i tapped to see a specific one my ipod blacked out. Now the screen only shows the apple icon and I cant go anywhere. I tried preshing the on/off and home button but it won't work. I even pressed both at the same time for 10 seconds and still nothing... I connected it to my lap top and went to my itunes account but it tells me that the device that i just plugged in has an error. I already tried plugging it back in several times and it still won't work. I don't know what else to do. I havn't had it for a whole year yet so its still insured to the apple company right? at least thats what I heard

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Embedded link not showing up in Illustrator

    I had a client send me a word document as a pdf which I dropped into Illustrator to make it print ready. When I pulled the file into Illustrator, two of the embedded links, which happened to be the logo of said client, did not show up. The file is in the links panel and shows it as embedded, I can even see the bounding box when I hover over where the logos are supposed to be. However, when I open the file in adobe reader or acrobat, or even preview, those logos show up. Illustrator showed no errors and none of us caught it so it was printed without the logos.
    Is there an explanation for this and how can I check for it in the future just in case it happens again?

    You may need to get the embedded files from the person who authored the Word doc. and relink them to have them show up correctly. I'm not the biggest expert on Word but it may have something to do with the way the PDF was created from Word. Best way to prevent this from happening again would be to make sure if you have embedded files in a PDF you are opening in Illustrator that you address each one with caution. Select the links, one at a time in the links panel and click the go to link icon in the bottom of the links panel. This will highlight the link and zoom you into its location, if you see nothing, no graphic in the linked graphic area then you most likely need to get these graphics from the Word author and Relink them into the Illustrator file. Other possability would be to find out if there is a preset for PDF creation you could supply to the Word author that allows him/her to create PDF files that work for you.

  • Why unexplained strips / lines appear on flattening the PDF in PRO or while zooming in Illustrator ?

    Hi,
    I have a JOB which on normal Adobe Reader shows no issue.
    While flattening in Adobe Pro or while zooming in Illustrator, it shows some unexplained white lines / strips.
    This is seen on hard printed copy also.
    While Anti Aliasing is set to on in my printer machine, the problem is not there.
    What is the actual problem here ?
    Is there any issues in the JOB ? Could some one explain more technically ?
    Thanks in Advance,
    Bagavath S

    Yep, it definitely is a complicated workflow... But I'm not really sure of any other way to get from the 34" wide pattern to the home-sewing version which is split into pages and has alignment marks and whatnot. I'm very much an amateur that has figured it out as I went
    I went through the page in the photo pretty thoroughly with the layer panel and I couldn't find any mystery lines... But I did find something interesting; when I click on any of the pattern lines, it shows the whole line of the pattern piece, which extends well past the edge of the artboard. So when I'm printing the poster-sized PDF to 7.5x10 pages, it's keeping all the anchor points of a line even if only a small piece of that is on the actual page.
    Does this help? I've included the page in the photo as well http://www.putlocker.com/file/DADB4759DBB860D8
    Thanks again to everyone!
    Also, should I be keeping all the files I'm editing as .ai files and then only exporting to PDF for the very final product? I was doing that at first, but then using .pdf for the whole process didn't seem to make any difference.

  • Thin black line across Indesign CS4 doc exported to PDF

    Hi ... am using Indesign CS4 on OS Windows XP and exporting docs to PDF (Acrobat 9 Professional) then printing on a HP Colour LaserJet CP2025.
    I'm getting a thin black line across the bottom of the page when printing - it doesn't show up on the screen though.  The line sits 5mm above the bottom edge of the page and prints whether I have bleed set or not in Indesign.
    Have tried toggling scaling, printer's marks settings, printer settings,Adobe Acrobat 9 Professional settings with no joy.
    Can anyone help? 

    Hi all,
    EUREKA!   Looks like it's finally fixed ...
    One of my printer (HP Colour Laser Jet CP2025) has an advanced printer property, under printer features, called "Print Data Optimization" - this was set to "Auto" - I changed it to "Optimise for Text and Vector" and voila!  Thin black line has disappeared and I'm happily reprinting a bunch of documents ...
    Thanks everyone for your advice and input - saved my sanity
    Sally

  • TS1702 iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. Have tried to reset it (not responsive), link to iTunes (not recognized), etc.

    iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. I have tried to reset it manually and via iTunes (not responsive), linked it to iTunes (not recognized), etc. Nothing works. This happened after an iTunes updated, after I was asked to "restore" my iPad to factory settings.

    Thanks, King_Penguin. Yes, I tryied putting the iPad into recovery mode. It freezes in the black screen with the iTunes and USB cable. When I followed the instructions and then started iTunes, I received the following message: "A required iTunes component is not installed. Please repair or reinstall iTunes (-424040)".
    I have unistalled iTunes three times already and donloaded and installed three new versions. No luck.
    Thanks a billion once again!

  • Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.

    Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.

    Your feed is at http://blacktribbles.podomatic.com/rss2.xml
    When subscribed to in iTunes the recent episodes show, but the Store hasn't updated for some time.
    There appears to be an issue with the feed. In the episode 'WRESTLING MARCH MADNESS: Final Bracket & Championship' of 31st March you will find in the 'description' tag the following line:
    4. KURT ANGLE
    At the end of this line is an invisible character which seems to be wrecking the feed - although it works OK when suscribing in iTunes it won't load in a browser (and I also found the feed very slow to load, which won't help matters with the Store)
    This sort of thing usually happens when you paste text in from a word processing application and manage to include one of the invisible control characters. I don't know how easy it will be do do it in Podomatic but you should delete that entire line and retype it to remove this charter.
    You should keep an eye on the time it takes the feed to be accessed - if there is a long enough delay (and it was quite some seconds when I tried) the Store may well timeout and fail to read it. At the moment it's showing a cached version from the last time it was able to read it.

  • HP Recovery Manager only shows a black screen when opened on dv6t

    I just recently got a HP Pavilion dv6t-6c00 notebook and I tried to create my set of recovery discs, which I've already been having trouble with because I don't have the right brand of DVDs. I still haven't completed the process of making all 5 recovery discs. When I try to open the HP Recovery Manager to continue the process, it opens but only a black screen comes up that says "Welcome to HP Recovery Manager. Use this tool to get your computer back up and running if it ever stops running as usual." It won't let continue making the recovery discs, or do anything for that matter. I've tried running in safe mode and starting the program, but the same thing happens.

    Hello msorr21. Before I can thoroughly assist you, I need to ask a few questions:
    What is the exact model number of the computer? If you are unsure, reference this link to show you how to find it: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    What Operating System do you have?
    Could you give a little more detail on the issue you are experiencing?
    Please respond as soon as possible. I'm only here to help!
    Mario
    I worked on behalf of HP.

  • MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS

    MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS

    Hi,
    First plaese unplug any external device (except the mouse and keyboard), then hold on the power button, perform a cold reboot, what is the result?
    If doesn't work, please press F8 (or other button, depend on your PC model) boot your compute into recovery console.
    You can restore your system to a previous point or perform a startup repair, please refer to the following link:
    What to do if Windows won't start correctly
    http://windows.microsoft.com/en-in/windows-vista/what-to-do-if-windows-wont-start-correctly
    Yolanda Zhu
    TechNet Community Support

  • Custom splash screen only shows up when command line is used...

    Hi,
    Everything in my Java web start application works perfectly but, the custom splash screen only shows up when command line is used ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"), if I use the shortcut on the desktop or in the start menu, the Java 7 splash screen shows up (tested under Windows Vista and Seven). Does someone have any clues?
    Thanks...
    My jnlp file :
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="6.0+" href="AcSent.jnlp">
      <information>
        <title>AcSent : Commande de repas</title>
        <description>AcSent - Commande de repas</description>
        <vendor>AcSent</vendor>
        <homepage href="http://www.xxx.eu" />
        <icon href="acSentIconBiseau.png" />
        <icon href="splashAcSentRC.png" kind="splash" />
        <shortcut online="true">
          <desktop />
          <menu submenu="AcSent" />
        </shortcut>
      </information>
      <security>
        <all-permissions />
      </security>
      <resources>
        <j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" max-heap-size="128m" />
        <jar href="AcSentJnlpProgressIndicator.jar" download="progress" />
        <jar href="AcSentJnlp.jar" main="true" version="1.0" />
        <property name="jnlp.packEnabled" value="true" />
        <property name="jnlp.versionEnabled" value="true" />
      </resources>
      <application-desc name="AcSent" main-class="eu.acsent.jnlp.AcSentApplication"
           progress-class="eu.acsent.jnlp.progressindicator.CustomProgress"> 
      </application-desc>
    </jnlp>

    Hi again,
    I made some researches :
    - The link in the generated shorcuts ("C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp "C:\Users\Arnaud\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\46\69c1e9ee-1f252d1a") is not the same as the one I use in the command line ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"). Is there a way in the the JNLP file to tell how to generate shortcuts (not the icon, etc., but command line options)?
    - This sample (https://blogs.oracle.com/thejavatutorials/entry/changing_the_java_web_start) displays the splash screen when I click on the the generated shortcuts (I use Windows 7). I have copied the ButtonDemo jar file and the JNLP file on my IIS web server (Windows 2008 Server), this time the splash screen does not show up when I click the generated shortcuts but always shows up when I use the command line. Can someone tell me if it is a trouble with IIS ?
    Thanks again...

  • IPhone 5 Battery stays at the same percentage, phone fades shows white and black lines then dies. Now phone screen is shaking and does the same thing.

    My iPhone 5 which has been working fine has only today started to get these problems. The phones battery percentage stays at the same number and only changes if i swith it off or when it does it byitself but then stays at that number. When I use it it constantly turns off by slowly fading then showing white and black lines then going off. The screen is now shaking and keeps turning off. It was on IOS 6 which I just updated as I thought this could be the issue but it still does the same thing on IOS 7. Has anyone else experienced these problems or know what is wrong with my iPhone?
    Please reply!

    Sounds like the device is failing. Since you updated to iOS 7, that would do the same as a restore. I would make an appointment at the Genius Bar at Apple to have the device checked.

  • Black lines not all showing up the same color when exported as any type file

    Hi everyone,
    I could really use some help as this is driving me crazy! Whenever I upload my Illustrator file with my logo online or export my logo as any type of file, certain black lines are lighter than others. I checked in Illustrator by clicking the lines that were showing up different shades when exported and all have the same #000000.
    Does anyone have any ideas what I'm doing wrong?
    Thanks!

    Unfortunately my file is set up like a hot mess. Everything is in the same layer and I should have definitely done multiple ones. This is only the second logo I've designed and I'm learning as I go. Basically I did an image trace of the drawing and then went back and manually fixed lines. Instead of having only a few to select I have many all in the same layer as my color.
    I noticed my vector logo works fine when exported. It's the files where I am resizing it that are coming up in the different colors.

Maybe you are looking for