Unfamiliar icon & how to get it serviced

I let the ipod go too long without charging...
In addition to the exclamation point/folder icon, sometimes an unfamiliar icon (not one of those seen on the ipod support page) will appear. It has an exclamation and a battery.
The ipod can be recognized by computers and the music and data can be accessed, the problem is that when disconnected from the computer, the ipod will not turn on (except to give the "you have a problem" icons). I've gone thru the reset, charge (which it appears to be doing when connected), update, etc. and that does not help.
So, how to get it serviced?
I've had it for less than 6 months so it should be under warranty. Problem is that I'm moving out of the country in a few days, not enough time to have them get it back to me - and I don't think the warranty is good for outside the US.
I might be able to stop by an Apple store, but so far the genius bars are all booked up, will they look at it if I don't have an appointment?
ipod nano   Mac OS X (10.4.3)   with Mac

Whats happened is the battery has degraded where you have not charge it in forever.
the Battery with ! Icon is shown here on this page at apple along with a link to steps you may take if it still shows this icon after getting a full charge http://docs.info.apple.com/article.html?artnum=93936
Id say if you keep it connected to a charge and let it charge up for afew hours (Not like afew min or just one hour), then restore it most of the issues will go away.
If connected to a computer to charge, make sure the computer stays on and doesn't go into some "Sleep Mode". If on a laptop plug the lap up to its ac adapter while the nano is charging and don't close the screen down

Similar Messages

  • How to get warranty service claim from nokia c5-03...

    how to get warranty service claim from nokia c5-03 in india because i have problem with nokia c5-03 I Purchase 2 week ago a new nokia c5-03 but from day 1 i facing same problem like 1) app close itself 2) internet browse close if any thing is downloading or downloading over 3) memory full always then i should reboot the phone then it work. 4) ovi map is open it shows memory full close the app So kindly help me how to get warranty service claim from nokia c5-03 in india i am unhappy with nokia c5-03
    Solved!
    Go to Solution.

    i updated software also but the same problem cont... I want to know that nokia will give back money or exchange for other new mobile

  • How to get a service notification number for given serial number

    Please, someones know how to get a service notification number based on serial number.
    In our process the notification can be created as first step (IW51) or can be created starting from service order (IW32).
    Thanks in advance.
    Luca

    Hi pooja,
    actually standard service request numbers are configured in spro->crm->transactions->Settings for Service Requests->Number Ranges. here they are maintain service request,incident,problem number ranges..
    so when ever your creating any service request then that number range will appear in that object id.
    you have to get that object id in your custom field get_method and based on that you have to change your number..
    example:
    current = me->bo.
    current->get_property_as_string( EXPORTING iv_attr_name  = 'OBJECTI_ID'  RECEIVING rv_result  = lv_id ).
    here you will get object_id based on that you have to write your own logic to display custom value.
    " write your custom logic to populate custom field. pass that custom field value into returning parameter.
    value = custom_value.
    Thanks & Regards,
    Srinivas.

  • How to get cloud services CPU Percentage and Network In

    Hi,
    I am using Service management API to collect the cloud services related metrics for example
    Cloud name, Status and location etc.
    How to get the CPU, memory, network and disk related metrics of cloud services using the same API.  I am using java code to collect all the details. Please verify the below source code..But i did not get the output. But there is no error message. Help
    me how to get those details..
    Configuration config = ManagementConfiguration.configure(
    new URI(uri),
    subscriptionId,
    keyStoreLocation, // path to the JKS file
    keyStorePassword, // password for the JKS file
    KeyStoreType.jks  // flag that you are using a JKS keystore
    CloudServiceManagementClient cldCli = CloudServiceManagementService.create(config);
    CloudServiceOperations cldOpe = cldCli.getCloudServicesOperations();
    CloudServiceListResponse cldListRes = cldOpe.list();
    ArrayList<CloudServiceListResponse.CloudService> cldServices = cldListRes.getCloudServices();
    if(cldServices != null)
    for(int cc=0; cc<cldServices.size();cc++)
    CloudServiceListResponse.CloudService yesCld = (CloudServiceListResponse.CloudService)cldServices.get(cc);
    if(yesCld == null)
    continue;
    ArrayList<CloudServiceListResponse.CloudService.AddOnResource> cldResRes = yesCld.getResources();
    if(cldResRes == null)
    continue;
    for(int r=0; r<cldResRes.size(); r++)
    CloudServiceListResponse.CloudService.AddOnResource addOnRes = cldResRes.get(r);
    if(addOnRes == null)
    continue;
    ArrayList<CloudServiceListResponse.CloudService.AddOnResource.UsageLimit> cldUse = addOnRes.getUsageLimits();
    if(cldUse == null )
    continue;
    for(int u=0;u<cldUse.size(); u++)
    CloudServiceListResponse.CloudService.AddOnResource.UsageLimit useLimit = cldUse.get(u);
    if(useLimit == null)
    continue;
    System.out.println("NAME:"+useLimit.getName()+"UNIT "+useLimit.getUnit()+" Amount used "+useLimit.getAmountUsed());
    Thanks & Regards,
    Rathidevi

    Hi,
    The Azure Diagnostics capability supports the configuration of diagnostics information than can be captured locally on a role instance and then persisted to Azure Storage on some timescale, this only support Azure Cloud service, I think it is useful for
    us to analyze the performance, if you don't want to use it, please try to use
    Azure Monitoring Service API, for more information, refer the below articles.
    #https://convective.wordpress.com/2014/06/22/using-azure-monitoring-service-with-azure-virtual-machines/
    #https://convective.wordpress.com/2014/06/27/using-azure-monitoring-services-api-with-azure-cloud-services/
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to get Azure service pricing details programmatically?

    Hi,
    Can anybody please tell me how can I programmatically get Azure service pricing details (pricing for Compute, Data Services , App Services, Network Services) from Azure website?
    Does Azure provide the pricing details in JSON format? 

    Hi,
    We are aware of the great feedback at:
    http://feedback.azure.com/forums/170030-billing/suggestions/1143971-billing-usage-api and we are looking into this. Please feel free to comment/vote on that feature request.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to get the service address from service address number

    Hi, IS-U Gurus:
    I got the service address number by passing business partner number to  BAPI 'BAPI_ISUPARTNER_GETDETAIL'
    On return table of "bapiisubpa", the first field is service number, but what we need is service address,
    How can I get the service address from service number ?
    Thanks in advance.
    Liang
    Edited by: Liang Ji on Apr 27, 2009 6:57 PM

    hi
    are u looking for business partner address?
    if so u can ref table but020, get its bp no. and then refer table but000 for its address.
    Regards,
    Sumedha

  • How to get the service name of a webservice using UDDI API

    Hi,
    Iam working on setting up a dynamic partner link in a BPEL, by passing the endpoint of a web service queried from the UDDI (Oracle Service Registry 10.3 ) using the API. Iam able to do it successfully.
    Now, for example I have two operations in my wsdl, one to createCustomer and the other to bookTicket. I need to get the operation name using UDDI API so that i can pass it along with the endpoint to the partner link. ie. When i need to createCustomer, my UDDI API code will need to get the service name createCustomer and the endpoint and I would pass them to the partnerlink and the createCustomer operation of my webservice would be called.
    Can any one help me to get the service names of the wsdl using UDDI APIs.
    Thanks,
    Ananth

    Hi sia,
    1. Table is APQI
    2. field name for session name is GROUPID
    regards,
    amit m.

  • How to get "Oracle Services for MTS" working?

    I've implemented the microsoft code example (see at the bottom) for the use of distributed transactions (with system.transactions and MTS support). The code works fine as long as I use only MS sqlserver.
    Well, I tried one connection to an oracle database and one connection to the sqlserver - and here the trouble starts ;-)
    Oracle doesn't care about the transaction. After the command is executed the changes are made to the oracle database at once (no commit has occured at that point) even if the second command isn't successfull.
    I suppose at the moment that the problem must be something around the interaction between MTS and oracle database, more precisly the oracle Services for MTS.
    I've installed the odp.net client (ODAC1020221.exe).
    The installer tells me that oracle data access components 10.2.0.2.21 and within the Oracle Services for MTS are installed.
    But I cannot find a service with that name in the service list, OracleMTSRecoveryService is listed, but I'm not sure if that's the right one.
    So here are my questions:
    What's the name for 'Oracle Services for MTS' in the services list?
    Do I have to install more than the odp.net client to get the MTS support running?
    Is there a mistake in the code I'm running?
    any help is welcome ...
    thanx in advance!!!
    And here's the code I'm working with:
    [Transaction(TransactionOption.RequiresNew)]
    public class Worker : ServicedComponent
    [AutoComplete]
    public void Test()
    using (TransactionScope scope = new TransactionScope(TransactionScopeOption.RequiresNew, new TimeSpan(0, 5, 0)))
    DbProviderFactory theFactory = DbProviderFactories.GetFactory("Oracle.DataAccess.Client");
    using (DbConnection connection1 = theFactory.CreateConnection())
    try
    connection1.ConnectionString = ".........";
    connection1.Open();
    DbCommand command1 = theFactory.CreateCommand();
    command1.Connection = connection1;
    command1.CommandText = "Insert into user (name, surname,benoid) values ('hans','wurst','32315134512345')";
    object returnValue = command1.ExecuteNonQuery();
    using (SqlConnection connection2 = new SqlConnection("Data Source=localhost;Database=UserManagement;Trusted_Connection=true;"))
    try
    connection2.Open();
    //this command fails
    SqlCommand command2 = new SqlCommand("Insert into uuuu (name, vorname) values ('hans','wurst')", connection2);
    object retValue = command2.ExecuteNonQuery();
    catch (Exception ex)
    return;
    catch (Exception ex)
    return;
    scope.Complete();
    }

    hey what's up you figured out your problem with M$DTC/Oracle 11i with ODP.NET trying to do a TransactionScope?
    I saw your problem - and I ran into the same.
    Re: 10g Express + ODP.NET (version 2.111.6.20) > support TransactionScope?
    Trying to install "Oracle Services for MTS" not sure how but working on it now. Doc looks old however,
    http://www.oracle.com/technology/tech/windows/ora_mts/index.html
    Did you get pass this already?

  • How to get the service master long text from the AC03

    Hi All,
    we are using the FM READ_TEXT  to read the long text for service master  which is maintained in AC03 ,Please can any one suggest me how to do the same.
    Get long description
    CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                            = LTXT
          language                = EN
          name                    =  '003000124'
          object                  = 'ASMD'
        TABLES
          lines                   = litab_line
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
    Regards
    cb

    Hello
    Try this:
    CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                            = 'LTXT' " <- '' missed
          language                = 'EN' " <- '' missed
          name                    =  '000000000003000124' " <- 18 symbols must be here
          object                  = 'ASMD'
        TABLES
          lines                   = litab_line
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.

  • Double billing: How to get custsomer service????

    I upgraded my account from $35/month to $45/month and now Verizon is billing my credit card for BOTH.  ANd I can't get through to customer service to correct the situation.  What can I do?

        Hello richardmcmurtry, we undestand how alarming it is to receive unexpected charges! We absolutely would like to dive deeper. We can be reached via these mediums: http://vz.to/19p59Ec or you can send us a direct message via this forum: http://vz.to/1b8XnPy
    Wilton_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • How to get Livecycle Service Discovery Plug-in for Flash Builder working in 4.6

    Hi all.
    Re this product:
    http://help.adobe.com/en_US/livecycle/9.0/sd_releasenotes.htm
    Does this work in 4.6?  It worked fine in 4.5, but I'm not having much luck getting it up and running in 4.6.  Adter installation, I can see the connect to Livecycle DS option under Data, I can log in to the livecycle server and search for services, but when I try to pick a service and hit next, nothing happens, no errors or popups. 
    Anyone else see this?
    Thanks much

    Checking the eclipse log, it would appear that a noSuchMethodError is being thrown:
    !ENTRY org.eclipse.ui 4 0 2012-04-30 11:36:49.633
    !MESSAGE Unhandled event loop exception
    !STACK 0
    java.lang.NoSuchMethodError: com.adobe.flexbuilder.DCDService.core.ServicesFactory.newFlexService(Ljava/lang/String;)L com/adobe/flexbuilder/DCDService/core/IFlexService;
        at com.adobe.flexbuilder.services.lcservice.LCService.introspectService(Unknown Source)
        at com.adobe.flexbuilder.services.lcservice.LCServiceWizard.nextPressed(Unknown Source)
        at com.adobe.flexbuilder.DCDService.ui.wizard.ServiceWizardDialog.nextPressed(ServiceWizardD ialog.java:95)
        at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:428)
        at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
        at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
        at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
        at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
        at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4165)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3754)
        at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
        at org.eclipse.jface.window.Window.open(Window.java:801)
        at com.adobe.flexbuilder.DCDService.ui.wizard.ServiceWizard.show(ServiceWizard.java:191)
        at com.adobe.flexbuilder.DCDService.ui.wizard.ServiceWizard.createService(ServiceWizard.java :153)
        at com.adobe.flexbuilder.dcrad.views.ServiceExplorerView$1.handleEvent(ServiceExplorerView.j ava:533)
        at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
        at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
        at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1077)
        at org.eclipse.swt.widgets.Widget.sendSelectionEvent(Widget.java:1094)
        at org.eclipse.swt.widgets.Link.wmNotifyChild(Link.java:1071)
        at org.eclipse.swt.widgets.Control.wmNotify(Control.java:5534)
        at org.eclipse.swt.widgets.Composite.wmNotify(Composite.java:1896)
        at org.eclipse.swt.widgets.Control.WM_NOTIFY(Control.java:5086)
        at org.eclipse.swt.widgets.Control.windowProc(Control.java:4584)
        at org.eclipse.swt.widgets.Display.windowProc(Display.java:4985)
        at org.eclipse.swt.internal.win32.OS.CallWindowProcW(Native Method)
        at org.eclipse.swt.internal.win32.OS.CallWindowProc(OS.java:2424)
        at org.eclipse.swt.widgets.Link.callWindowProc(Link.java:172)
        at org.eclipse.swt.widgets.Widget.wmLButtonUp(Widget.java:2057)
        at org.eclipse.swt.widgets.Control.WM_LBUTTONUP(Control.java:4912)
        at org.eclipse.swt.widgets.Link.WM_LBUTTONUP(Link.java:909)
        at org.eclipse.swt.widgets.Control.windowProc(Control.java:4565)
        at org.eclipse.swt.widgets.Display.windowProc(Display.java:4972)
        at org.eclipse.swt.internal.win32.OS.DispatchMessageW(Native Method)
        at org.eclipse.swt.internal.win32.OS.DispatchMessage(OS.java:2530)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3752)
        at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
        at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
        at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
        at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
        at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
        at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
        at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
        at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  • How to get Oracle Service Bus 10gR3 for windows 64 bit

    Hi,
    I'm looking for Oracle Service Bus 10gR3 and Oracle Data Service Integrator 10gR3 installables for Windows 64-bit. However, I saw the available versions on download section are only for indows 32-bit. I'm using win 64-bit to detect 4BG RAM or more which is not possible in win 32-bit.
    Can anybody help me wheather compatable version are available or is there any solution for that?
    Thanks in advance,
    Ganesh

    Hi Ow;
    Please check:
    Step-By-Step Install of RAC with OCFS on Windows 2003 [ID 178882.1]
    WIN: Does Oracle Cluster File System (OCFS) Support Access from Mapped Drives? [ID 225550.1]
    How To Check The Certification Matrix for Real Application Clusters [ID 184875.1]
    Regard
    Helios

  • How to get Acrobat Services as a print option for my Epson Workforce 600 printer

    1) I subscribed to the Acrobat services, but I am not able to get it to load as a selectable printer on my Epson Workforce 600 printer.
    2) I have a version of Win2PDF.exe that I bought previously that produces PDF files from my print command, but when I try to load them into Acrobat Services to, say, merge PDFs they will not load (get a "Corrupted File" message on ALL Win2PDF files, nit just one or two).

    Hi astrofun,
    You are posting on acrobat.com online service forums.
    Kindly post this query in Acrobat forums:Acrobat
    Regards,
    Florence

  • Several Problems with MBP - How to get it serviced in UK?

    Hi,
    I bought my Macbook Pro in April. I didn't get the extra 3 year Apple Care as I didn't think it was worth it.
    When the MPB arrived, my first issue was noticeable instantly. In the top left hand corner of the screen, there are several pixels that seem to flicker. Now, with them being in the very top corner (right on the edge) I decided to ignore them. Also I was hooking the computer up to an external display and would use it with that pretty much all the time so It wasnt a biggie.
    Just outside my 3 month complimentary Apple Care, a problem with what sounds like one of the fans arose. When the CPU was under load and the fans sped up, a rather irritating noise was coming from the computer. The noise sounds like one of the fans is catching something, and it produces a noise that resembles a hedge strimmer or some other garden tool. The noise gets louder as the fans speed up. Its very irritating and is not a normal operation sound - and i fear that the fan will eventually fail completely and then i'll have problems.
    My third issue is the whine - which I understand Apple are solving by replacing the Logic Boards on affected systems?
    So - about a month ago I contacted Apple support. The guy I spoke to was obviously from India and spoke bad English. I explained my issues - and he gave me three options to solve the problems.
    1. Lay out £279 for Apple Care
    2. Pay £35 for Telephone Support
    3. Take it to an Apple Store to get looked at.
    The first option is a no go. I refuse to pay that amount of money. The second option, what use is that to me? He would take me through telephone support troubleshooting and come to the conclusion that what I told him is right and that they are all hardware faults. Third option, the Nearest Apple Store to me is 40miles away. Over an hours drive. I would need to take it in there, then leave it, and go back and collect it. This really is a pain in the *** because I do not drive and I work Monday-Friday 8-5.
    Now, is there no way that I can just get Apple to send me a container to send my MBP back to them in the mail and then them to send it back? I cannot believe that this is not the case.
    I am in the UK by the way.
    Any help appreciated.
    Thanks

    apple is supposed to be able to deliver boxes to be sent to the repair depot i believe, i doubt the UK is left in the dark on this issue. any problems you have with your MBP should never be ignored, since its likely they could get much much worse. regardless of whether or not your phone support is expired, your warranty is still valid, and you can arrange a pickup if you feel travelling all the way to your nearest apple dealer is too inconvenient. they cant refuse pick up service, because thats one of the things promised to you by apple.
    one thing to note, in the time it takes for apple to repair your unit, they extend the warranty by that much time. i checked in the warranty booklet that came with my computer.

  • OSB: How to get proxy service name

    Hi all,
    Could anyone please tell me the way to get the proxy service name inside the message flow of OSB.
    Regards,
    Rakesh Ranjan.
    Edited by: Rakesh Ranjan on Oct 1, 2010 2:27 PM

    Inound context variable ($inbound) holds the value of service name and operation name being invoked. Use expression $inbound/@name to get service name and expression $inbound/ctx:service/ctx:operation/text() to get operation name being invoked.
    Remember that opeartion name will be there only for services which have operations (like a WSDL based service)
    Regards,
    Anuj

Maybe you are looking for