Unfirmed purchase reqs not getting cancelled in the background MRP run

Good morning,
The system has created Purchase requisitions for 2010 due to the setting in the MRP run. we want to change it to planned orders outside the Vendor lead time and when i run a REGEN MRP with setting 2 (Purchase requisitions in opening period) its not happening. When i run indivudual MRP with MD03 with the same setting its alright, purchase requisitions are deleted and its converted into Planned orders. Can anyone please throw some light on to make backgrouond MRP run delete the Purchase requisition and create planned orders.

Jags,
You must delete the offensive PRs first. Regardless of the MRP settings, MRP will still decide that the PRs are valid and will leave them alone. It will not 'change' them into planned orders.
Run Regenerative MRP with your new settings (Create purchase reqs as '2') but also run your MRP in planning mode '3', delete and recreate planning data. It will delete all existing unfixed purchase requisitions, and then run MRP.
Rgds,
DB49

Similar Messages

Certain Maintenance Plan not getting scheduled in the background job

Hi Gurus,
I am facing an issue here.
A weekly background job (RISTRA20) runs every weekend and schedules the maintenance plans.
But we have noticed that some maintenance plans are not getting scheduled. i.e no orders or schedule is getting generated.
When I run IP30 manually for these plans then the schedule gets generated and orders get called.
I have checked up the background job and it is running fine.
Also, i have noticed a similarity in all these plans which are not getting scheduled. There schedule has been restarted (through IP10) at somepoint or the other.
But i don't see any direct impact of this?
Can any of you provide some help on this?? Points will be rewarded.
Thanks and regards,
Nitin Saini

Hi Narender,
Thanks for replying.
The message number for 'Groups don't match' is ME303.
I think this does not have anything to do with the restart as i have done further investigation.
Whenever I run IP30 with sortfield input as AS02*, i get the error as mentioned above for a certain number of maintenance plans while the remaining plans get scheduled.
If i run IP30 for any other sort fields, it runs fine and i don't encounter the error
mentioned above.
If you send me ur email address, i could forward you screen-shots of the issue.

Purchase requisition not generate for dependent requirement after MRP run

Hello PP expert,
In our MTO scenario after MRP run planned order generate for header material but no PR generate for BOM components, (BOM not explode) when we run MRP component level in MD02 PR generate, system showing message "40- No coverage not provided by master plan" in MD04 order tree. this problem coming after when we DIMP applied. I checked some OSS note also.
Can any one provide right solution.
thanks in advance.....its urgent as client requirement.
regards,
Amit Awasthi.

Hi Amit
You must select the green star for the correct answer, in order to close the thread.
You may also select the yellow start for the helpful answers, in order to award points for those who helped you. See the blog below for more details:
How to close a discussion and why
I can see that most of your old threads are still open, therefore, I'd like to ask you to review and close them, by selecting the correct answer.
BR
Caetano

Inspection lot not getting cancelled after the inbound delivery is created

Hello,
The scenraio is like this.
1. Material was procured in plant A.
2. Using the stock transfer purchase order, transferred the material from Plant A to Plant B.
3. Outbound delivery was created, Handling units were assigned and Post Goods issue was done.
4. As soon as this was done, inbound delivery got created automatically in plant B and Handling units were assigned.
5. Inspection lot was created with origin "08".
6. Now I want to reverse all the transactions, so I did as mentioned below.
7. Handling units were deassigned from the inbound delivery and inbound delivery was successfully deleted.
8. Now tried to do the reverse post goods issue and got the error "Handling unit XXXXXX cannot be reversed"..Goods movement cannot be reversed for handling unit XXXXX because it has been changed or assigned to object since the last goods movement posting".
The issue is that as soon as the inbound delivery is deleted, the inspection lot status should change, which has not changed. So kindly let me know how to make the system cancel the inspection lot as soon as the deassignment of handling units is done in inbound delivery or the inbound delievry is deleted.
Regards,
Narendra Bora

Hello,
Can anyone please reply.
Regards,
Narendra Bora

Norton and will not get out of the way of running shockwave

My shockwave plugin keeps saying it crashed. I am trying to update or download the newest but Norton is making me agree to their service in order for the download to complete and I have been warned about Norton. Please help.

Uncheck Norton before installing the player.

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Partner details are not getting captured to the purchase order from the ven

Hi,
Issue : ( ECC PO)
Partner details are not getting captured to the purchase order from the vendor master.
We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
Any suggestions are highly appreciated.
Regards
Sudhakar

Hey Sudhakar,
I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
If this is working properly for standard POs, then,
Go to Partner detrmination under Purchasing> Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
and enter teh appropriate document type and refer it to the procedure you have for NB Pos

I just signed the creative cloud, and I'm not getting to use the purchased software. thank you

I just signed the creative cloud, and I'm not getting to use the purchased software. thank you

Rodrigo_1405 do you receive any specific error messages? For information on how to install the Adobe Creative applications included with your membership please see Creative Cloud Help | Install, update, or uninstall apps.

Urgent help req : work item id not getting passed in the method

Hi ,
I have created a subtype zcats of business object CATS and delegated it .
I have created a new method Approve1 ( with attributes SYNCRONUS & DIALOG ) in zcats which is similar in coding to Approve method of CATS ( DIALOG) .
I have include the method Approve1 of business object zcats in a standard task .
The problem is that when the eorkflow gets triggered , the workitem id is not getting passed in the method APProve1 of zcats.
Can someone please help me with this .
Points would surely be awarded .

BEGIN_METHOD APPROVE1 CHANGING CONTAINER.
DATA: WORKITEMID_IMP LIKE OBJECT-KEY-ITEMID.
DATA: WI_CHCKWI LIKE SWWWIHEAD-WI_ID.
DATA: WORKITEM TYPE SWC_OBJECT.
   <u> WORKITEMID_IMP = OBJECT-KEY-ITEMID</u>.
    SWC_GET_ELEMENT CONTAINER '_WORKITEM' WORKITEM.
    SWC_GET_PROPERTY WORKITEM 'WorkitemReference' WI_CHCKWI.
    IF SY-SUBRC EQ 0 AND NOT WI_CHCKWI IS INITIAL.
      WORKITEMID_IMP = WI_CHCKWI.
    ENDIF.
    CALL FUNCTION 'CATS_WF_APPROVAL'
      EXPORTING
        WORKITEMID_IMP = WORKITEMID_IMP
      TABLES
        CONT_IMP = CONTAINER.
END_METHOD.
hi ,
the above is the code in the method .
At the first step of execution underlined above , the work item id is appearing blank .
I think that the value is not passed to the container , but i am not sure og how to pass data to this conatiner

I CAN NOT GET PSE 11 TO INSTALL OR RUN. I PURCHASED THE UPGRADE

I CAN NOT GET PSE 11 TO INSTALL OR RUN

It appears to have loaded and there are two pse icons for pse 11. I am using windows and pse 11 will not open.
Sent from my iPhone

Purchase Requisition not getting generated in APO

Hi,
I am facing an issue in APO. Once I confirm a sales order, I have to run the Product Heuristic in APO to generate the purchase requisition through rrp3. The problem is the purchase requisition is getting generated without the PR number. The line does not show the number and also the purchase req is not reflecting in ECC. Please refer the screenshot. Kindly help me with this.
Thanks & Regards,
Raja S

Hi Guys,
Sorry for the delayed response. Now got another issue. My CIF model for a Sales Order is not getting activated. I also cleared the queue in APO through /sapapo/cq and then start running the CIF. But it runs for a long period.
What could be the other possible issues with CIF model activation?
I am getting a message box like the below when try to activate the CIF. I keep ignoring the message and trying to run the CIF. But still I am unable to resolve. Kindly help
After resolving this only, I can go for the above mentioned issue. I sincerely thank all your support.
Regards
Raja S

Purchase requisition not getting generated in MD04

Hi,
     if i have my material with MRP type VB & my ROL is 10. Now if my stock at present is 0.74KG & if i do the MRP run with MD02 then my purchase requisition is getting generated.now i delete the purchase req & try it with MD01 for the whole plant but the same does not happen when i do the MRP run with MD01. my purshase requistion for the same material never gets generated. can anyone tell me what m i missing. following parameters are maintained by me in MD01 & MD02
Processing key          NETCH
Create purchase req.    1
Delivery schedules      3
Create MRP list         1
Planning mode           3
Scheduling              1

HI,
Check below threads,
[MDAB - Planning file entries   |MDAB - Planning file entries;
[How to use T-code: MDAB and MDRE|How to use T-code: MDAB and MDRE;
Regards,
Dhaval

Excise Invoice is not getting Cancelled

Dear Friend
When we create an invoice in vf01, excise invoice gets created automatically. But when we are cancelling the billing document excise invoice is not getting cancelled. Why its happening? Will you please tell if any customization is needed?
IF I need to cancel excise invoice from j1ih, the system requires input for the following:
Document Number
Document Year
Is this document number a customer invoice no or excise invoice no?
Thanks
Sangeeta

The same question you have posted twise
Excise Invoice is not getting Cancelled

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

Prevoius Reconciliation is not getting cancelled

Hi Expert s
To one of my client My Previous Reconciliation is not getting Cancelled how can we sort out this Issue .please do needful on this as it is very urgent and revert ASAP
Regards
Jenny

Hi,
Which type of reconciliation is not able to be cancelled?
What is the error which is appearing when you are trying to cancel the reconciliation?
If you goto Manage Previous Reconciliation > select the reconcilation number to be cancelled, are you getting the option of REDO? Have you checked whether the same helps your issue.
Kind Regards,
Jitin
SAP Business One Forum Team

Unfirmed purchase reqs not getting cancelled in the background MRP run

Similar Messages

Maybe you are looking for