Ungodly slow down load

I am downloading an 1.64gb movie and it is saying 34 hours to download i can get 15mbs on steam why not itunes any ideas on how to fix it, it is a collage connection so no router should be direct line.

Either something on your PC is causing it, or something on your ISP or an Apple server is throttling it.
If you boot your PC into safe mode with networking that should rule out software conflicts on the PC.
It's really difficult for a typical home user to troubleshoot. If you get disgusted, ask Apple for a refund.

Similar Messages

Slow down loads with ios 5.1

I have an iPad2 and iPhone4, Is anyone experiencing slower down loads speeds for Apps and Music under iOS 5.1?

The app is called Speed Test. I think that is what Diavonex is referring to. I have the app. I don't know that is absolutely reliable either or all that accurate. It is however, a starting point.
I think you just might experiencing what a lot of users are seeing - an overload on all of the Apple servers. With the new iOS to download and all of the apps that now need to be updated - things were a little sluggish for me for a couple of days. My download speeds for the app store seem pretty good now.
Have you even tried restarting or resetting your iPad to see if that helps?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

TS1398 Ipad Minin -Cellular 64GB Slow down load speed ???

Hello From Australia
Question I recently boiught a new Ipad Minin -Cellular 64GB and am very disapointed
Reason is Very Very Slow down load speed ??? My Ipad Minin -Cellular 64GB when connected to our home Telstra high-speed Wi-Fi Internet has a maximum download speed of say 2Mbps while my laptop pro (side by side comparison) is downloading at 8Mbps ?? I am using a Telstra Technicolour :
Wireless Access Point - Telstra
Configuration
Interface Enabled:
Physical Address:
a4:b1:e9:79:99:b5
Network Name (SSID):
Actual Speed [Mbps]:
65
Band:
2.4GHz
Region:
Australia
Channel Selection:
                                     Automatic                                     Manual
Channel:
                                     1                                     2                                     3                                     4                                     5                                     6                                     7                                     8                                     9                                     10                                     11                                     12                                     13
Channel Width:
                                     20MHz                                     20/40MHz
Allow multicast from Broadband Network:
Security
WPS Enabled:
Broadcast Network Name:
Allow New Devices:
                                     New stations are not allowed                                     New stations are allowed (via registration)                                     New stations are allowed (automatically)
Encryption:
Disabled
Use WEP Encryption
Use WPA-PSK Encryption
WPA-PSK Encryption Key:
WPA-PSK Version:
                                     WPA                                     WPA2                                     WPA+WPA2

This is the iPod touch forum. I requested your post be moved to the iPad forum.

Slow down loading

new apple tv is so slow to watch a preview or down load a movie I checked my speed on speed test . net and my cable speed was over 15

http://support.apple.com/kb/TS3623 (scroll to the bottom)
As I said also rule out interference, also there could be ISP throttling either specific to the device, or at certain times etc.

WLC-4402 : Users complaint slow down load

Hello
My users complaint the down load speed is slow when using wireless. I checked and indeed is slow.
Before this happen, my WLC is running 802.11b/g. So my thought maybe the 802.11b can slow down
on the users so I changed WLAN to run on 802.11g only. Well, it is still slow. If anyone has any idea
on this is appreciated.
The WLC-4402 is running on version 4.1.185 and all 19 LAPs is 1242AG with IOS version 12.4(3g)JA2

OUCH...
"Channel Utilization is depending on what channel and is changing from time to time.
Channel 1 is between 17 and 62, Channel 6 is between 9 and 33, and Channel 11 is between 28 and 45"
Do your APs have 802.11a radios? If so, move your asscoation to the 802.11a side and run your test... Your channel utlization is high, very high. I assume you have 1 PHY rate set to mandatory and lower data rates are enabled 1,2,5.5 ?
Lets clean up the utilization first and see the results before you go further...
Test the 802.11a side ...

My Iphone 4 is not restoring, specifically I have slow down load speeds and it is not completeing the download?

I have gotten results from, the down load will not start, to I get over 500MB of the 780MB than it stops and I lose it all. I have tried to do small blcks and pause, but whenever I pause the download it starts from the begining again. According to Itunes, my phone and Itunes are up to date. Does anyone have any ideas to help break up the download so I can get it in pieces and eventually have the full update to restore to?

Hrbhusker wrote:
... Does anyone have any ideas to help break up the download so I can get it in pieces and eventually have the full update to restore to?
Not to my knowledge...
If you are using windows... try this...
Temporarily disable your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

Firefox version 3.618 is slowing down loading pages. How do I downgrade to the version before this? I have windows xp

Ever since my system installed Firefox 3.618, web pages are very slow to load, switch pages, gmail is slower, and when it first comes up, there is a funny black area on the menu bar where I can barely see the links to click for gmail, etc., but the black bar disappears when it switches to a new page. I have windows xp, and want to downgrade to the version before 3.618. Thank you.

go to oldversion.com for a previous version.

Slow down loading podcasts

I have been expierancing very slow loading podcasts and sometimes they stop in the middle....Mark

Actually, there was no usb device hooked up, it was my 12" powerbook using the trackpad. Actually, it slightly improved when I hooked up my bluetooth mouse. But the problem still remained

Slow down loading of movie rentals after up date

since I did the 2.0.1 update, my rentals take hours before I can watch, use to be, I would rent and they would be available in a few minutes
I can still stream movies from iTunes, with no delay, and syncing seems to be just as fast
I 1st thought it may have been the .99 cent special i rented, and to many people were trying to DL at the same time, but since then I have rented 2 more movies and the same problem

probably just coincidence that you have slowness after update.
the most likely bottle neck will be your ISP... they could be throttling certain traffic, and the appletv downloads could be included in that.
if this is the case, there is nothing you can do about it.

Slow down load speed

I have 2007 intel imac running lion.My broadband speed is 4.5mbs to the router but my download speed is not sufficient to stream internet films without buffering or grainy pictures.Any suggestions ?

Reset the modem & router and restart the computer. Probably an issue with your ISP and has nothing at all to do with the iMac or OS X>

I just bought MacBook Pro 13'' for 1 week, and load cycle is 11. How could I slow down the load cycle count?

The question is that, Could anyone tell me how to slow down load cycle count?

"Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her notebook on the train, then plugs it in at the office to charge. This keeps the battery juices flowing."
Could you please explain me this?
I also want to ask another question is: " Is it good if I charge to 100%, then drain battery to 80%, then plug-in charger again"?

New Macbook pro is slowing down.any ideas why?

Hi There,
I bought a macbook pro last July and in the last week I have noticed it slowing down, loading webpages takes longer etc.... I updated to yosemite recently but I am not sure that is the issue. Could it be something to do with cache, someone was trying to download movies on it so maybe I have a small virus?
Any help would be appreciated.
Thanks.

Read my earlier reply about virus.
You can forget about virus
You don't have one
I suggest you download and install EtreCheck from http://etresoft.com/etrecheck
Run EtreCheck and publish report here
Allan

Flip4Mac Beta, Slow WMV load time?

Just wondering if anyone else who is using Flip4Mac Beta Universal is experiencing slow load time when loading a WMV movie file. I loaded a 1920x1200 606MB video file and that might be why. Anyway, just wanted to see if anyone else is experiencing slow WMV load time.

Like you I've noticed that when working with larger media files it'll slow down loading and other aspects. Especially moving through said files by fast forward/reverse.
I wouldn't exactly call it too bad though. QT native files get slowed down the larger they are too.
Don't forget it's still a Beta.

Slooow down load

I live 3 miles from my local exchange which in the sceam of things is not a great distance but im being told by BT that its the last 10 feet of cable from the main socket to the PC thats giving me my slow down load.
What hope have I got to move into the 21st century reguarding BB speed if its the last 10 feet of wire thats giving me the slow speed. Cant BT make there cable from the pole to the house 10 feet longer so the wire will reach the other side of the room?
You seem to be able to bounce signals from satalite to satalite hundreds of miles away but cant get me a down load from 3 miles and 10 feet.
Come on BT you are supposed to be a state of the art company and you cant help, I pay for the best you have to offer and it's "MY" 10 feet of wire that you cant get what I think im paying for that most take for granted, god knows what speed I will get when i buy two more laptops that will connect via your wireless hub, or may be it will not work at all.
Is it time I moved to a new service provider that will reduce my out going costs for BB and phone for the same speed???

This is actually a common complaint on this forum even though it is not obvious. I presume you had an OpenReach technician turn up, checked the line from your master socket, told you there was nothing wrong with your telephone line and then said it was your internal wiring.
If you go on the BT Broadband fault site, one of the problems they raise is internal wiring of the house being the problem.
Well, in actual fact I went through the same thing and actually had to prove that there was nothing wrong with my internal wiring. I even went and connected the ADSL router to the master socket to prove the point.
This blaming of the internal cable is a common tactic of OpenReach.
Now to be fair on my part, I do not know anything about your internal 10 feet of wire you mention. If you could tell me a bit more about the cable, like what type cable it is, and how it is attached to the master socket and then at the remote end, I can give you some suggestions or even tell you if the OpenReach technician is telling you a load of nonsense.

Xorg-server-1.2.0-2 high load, slows down everything

I've just updated xorg-server.
After xorg started, the system is very slow... as if everything works in slowmotion. The load of X (as seen in top) is very high and slows down everything.
I've had this problem with all the beta and RC versions of xorg-server-1.2.0 that I've compiled myself. The version I'm using now from the repositories (1.2.0-2) has the same problem.
This problem happens with kernel 2.6.19-ck and 2.6.20-ck, I haven't tried other kernel versions.
Turning off EXA (that means using XAA) and/or turning off composite in xorg.conf makes X quicker (the load is also lower), but still slower than normal (with EXA, composite and xorg-server-1.1.1).
My problem is probably the same as described in http://bbs.archlinux.org/viewtopic.php?id=29661
My system:
AMD Sempron;
Ati Radeon 9500 using the open-source driver;
glibc-2.5 compiled myself;
kernel-2.6.20-ck1 compiled myself;
kde*-3.5.6 compiled myself;
xorg-server-1.2.0-2 and all the libx*, xf86*, libdrm, libgl-dri and mesa are the newest versions from the repositories.
Last edited by eric (2007-02-27 15:42:55)

Alright, downgrading wasn't the solution I was looking for, so I took the path to darkness and installed the most recent proprietary ATI drivers (8.34.8). Because the laptop has some ACPI issues I have to apply two patches which in turn require a custom kernel. Needless to say the Arch fglrx driver packages don't work with this kernel. So, here's what i did:
1) fetched the proprietary drivers from ati.com
2) run them, looked in awe at the error message
3) went here: http://cvs.archlinux.org/cgi-bin/viewcv … root=Extra and fetched the fglrx-kernel-2.6.20 patch.
4)
cd /lib/modules/fglrx/build_mod/2.6.x
make clean
rm -r .tmp_versions
cd ..
patch < /path/to/fglrx-kernel-2.6.20
./make.sh
cd ..
./make_install.sh
modinfo fglrx
modprobe fglrx
lsmod | grep fglrx
5) Use aticonfig --initial to adapt /etc/X11/xorg.conf
6) Restart X
I hope suspend is still working...

Ungodly slow down load

Similar Messages

Maybe you are looking for