Unhappy Ipod screen. Now What????

I've tried resetting this thing, can't get the check mark. Haven't been able to reset it. Any ideas on what to do next?

What does this picture on my iPod mean?

Similar Messages

  • I was downloading updates for ipod touch 2nd gen and twice when I was to processing files stage it clicked off. There was no message on whether it was done or what I was to do next. I needed to reset the ipod. Now what do I do?

    I was downloading updates for Ipod touch 2nd gen and when the process was to the processing files point the screen changed and I wasn't given any idea as to whether the process was complete or not and if it was what was to be done next. I needed to reset the Ipod and now I am wondering what to do . Spend another Hour downloading and whatever amount on processing files and end up where I am now . Whats the next step in finding out what to do? This was the second attempt to do this with the first try happening the same except I am not sure how long the processing files part was.. Any suggestions as to what to try will be greatly appreciated.. Thanks

    Likely a batter problem since high temperatures destroy a battery.  I wold make an appointment at the Genius Bar of an Apple store to see what they say.  It is free except for your time.

  • I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

    I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

    This sorted it for me:
    Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
    To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

  • TS3682 on trying to reset ipod, screen now goes white, apple disappears, computer not picking up ipod, its only 5 months old

    On trying to reset ipod, screen has now gone white, computer not registering it, can't turn off ipod.  Its only five months old.  Please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Help! my ipod screen cracked, what now?

    Do I seek a replacement screen(from apple? or where?) I've seen a couple of places to send it in online but Im a little nervous about that.. and there are no Apple stores anywhere near me! Tips anyone please!
    p.s.  I seen the repair kits sold online but theres no way I could successfully accomplish that!

    Apple will exchange your iPod for a refurbished one for this price. Apple does not fix yours.
    Apple - iPod Repair price      
    You can do it an an Aple store
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    See the following to send it to Apple
         Apple - Support - iPod - Service FAQ
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it You said you were not up to it
    iPod Touch Repair – iFixit

  • Quick question: I restored my iPod.  Now what?

    I just restored my iPod (to those who helped me earlier, thank you). Now I'm getting this symbol:
    Power adapter plugging into wall
    This icon appears on the screen during an update or restore that occurs when iPod is connected to the computer via a low or no-power connector. This can include some USB ports and 4-pin FireWire ports. When this appears, disconnect iPod from the computer and connect it to the power adapter. Then plug the power adapter into a power outlet. The update or restore will complete and iPod will restart to the main menu.
    What if I don't have a power adapter? Is my only option to buy one?

    It probably just needs to be charged, you really don't need a power adapter because iPods charge via USB ports to your computer, because your tower supplies USB devices with an electrical currency to charge it.
    Try letting your iPod charge with the connection after the update (if iTunes recognises it) and leave it for about 2 hours. If nothing happens/iTunes doesn't recognise your computer/Windows and iTunes don't recognise your iPod, try reading up these articles:
    iPod acknowledged only on Windows
    http://docs.info.apple.com/article.html?artnum=93716
    iPod not recognised at all
    http://docs.info.apple.com/article.html?artnum=61711
    If this doesn't help, post back
    ryanjeffrey

  • Had my ipod fixed now what!?

    I had my 3rd Generation Ipod checked out and they already sent me one new one, this was in March of 2005. Now I see black lines appear when my battery is low, my music sometimes is not playing, or skips. Will apple fix it again, now that my warranty of the new battery is still in tact. Also does anyone know about that apple law suit that dealt with the 3rd gen. ipods? What happened with all of that stuff! thanks
    Lindsey

    Apple should fix your iPod if it's still under warranty, it matters not that it's been sent in once already.
    See this for the settlement info.
    http://www.appleipodsettlement.com/

  • IPod stolen, now what?

    My iPod was recently just stolen out of my locked car, not even in plain sight. What is the world coming to? But thats besides the point. Now I have a problem.
    My entire iTunes collection is still on my computer, but when I plug a new iPod in (which I will be getting soon) what's going to happen? Are there going to be any issues with putting all my music on another device?
    Also, everything I had was on the stolen iPod. I assume the theives simply reformatted the drive, but if they didn't, is it possible that they could somehow acquire the liscenses for the songs or perhaps even get any account information?
    This really *****. Please help.
    ABS, Windows XP Home    

    You shouldn't have any issues connecting the new iPod to your current iTunes.
    As far as I know, the thieves can't get any information from your iPod;
    as for licenses-->the purchased music from the iPod won't play on any other computer because they will need to be authorized with your username and password.
    ~Lyssa
    ~iBook G4 1.07GHz (Kaiya), with extra 256MB RAM ~and a red Apple logo~(Mac OS X 10.3.9)~ LaCie 160GB external hard drive~ ~3G 15GB iPod (Nakai)~ ~GiveStarsto users who earn them.~

  • Dead iPod mini -- now what?

    Hi, I have a 6GB iPod mini that suddenly went completely dead. Absolutely no signs of life on its LCD panel, even when plugged into a USB jack or a charger/speaker device. When I turned it on a few days ago I saw the "low battery" icon flash briefly, but it went dead immediately after that and has stayed dead. I am wondering if this means the battery has gone completely dead -- but if so, shouldn't it power up when plugged into an external power source? Or would a dead battery prevent even that from happening? How can I find out for sure what is wrong with it? I've seen battery replacement kits for very little money so I wouldn't mind giving that a try, but obviously if it is going to be much more expensive then I suppose I'd be better off getting a new iPod (though the mini meets all my needs so I'd rather not have to do that!)
    Thanks,
    Samizdat

    Hi,
    Have you connected it to your computer? If not, connect it, then try resetting the mini. Hold down the Menu and Select (Center) buttons for 6 seconds, or until you get an Apple logo on the screen. See if that works. If not, post back.
    Even if the battery is dead, the iPod should be recognized on your computer. Sometimes plugging it into an external power source doesn't do the trick.
    -Brian

  • Tried everything - receiver and regular Ipod volume - now what?

    I have gone threw trouble-shooting instructions: Power on and off, did reset,
    and restore. Got on this forum and tried the suggestion of plugging in headset over and over, both powered on and off.
    Speaker works when the phone rings, when answering the caller cannot hear me unless I select "speaker" mode. Headset works with Ipod but nothing without them. I can see the volume move when using the volume control.
    It appears that is is time to send to Apple, unless anyone knows of something I have missed?

    Well, just tried cleaning the plug with rubbing alcohol, but still nothing.
    I did not mention earlier, that everything working great. But, recently two variables were different. One was the upgrade from Apple. The second is bought a system to play over my car speaks, it is the type that is put in the tape deck. Had to get a Adapter Kit to plug that into the phone.
    I bought the system, tried it and all seemed fine (but got no calls at the time). Did the upgrade that night. The next day listen to music in the vechicle was fine. When I got a call I could not be heard by the caller.
    Later I found out about the Ipod not working on the regular speaker. Had not used that after the upgrade. So, not sure if either of this had anything to do the problem I am having.
    I will try to keep the Headset plugged in. Don't know what else to do.
    We do not have a repair center here. It was purchased at an AT & T store, but they stated they do not service them. That would result in me sending in or
    driving approx. 100 miles.
    Thanks everyone!

  • TS3274 still has a black screen now what do i do?

    what should my next step be? I have tried everything and it still is a black screen. Ive pugged it in to charge, nothing happens. Ive plugged into computer, nothing happens. Ive held down the sleep/awake button for 10 seconds, nothing happens. Ive held down both home key and sleep/awake button for awhile and nothing happened.

    You can try putting the iPad into recovery mode in order to restore the device
    iPad: Unable to update or restore

  • I tried to update my iphone 4 but it has gone off and now there is only the cable and itunes and the world on the screen now. what should i do to get it back

    help!!! i have updated my iphone 4 and it has gone off. It is only showing the cable. the world and itunes. how can i restore it back so its working again?????????

    You are in Recovery Mode.
    You need to connect to iTunes and restore.
    Hopefully you have a backup.

  • White screen during mavericks download now what do I do?

    While upgrading to Mavericks I got a white screen, now what do I do?

    I shut down and turned it back on and it seems to continue downloading where it left off.

  • I bought iphone on donedeal.ie it had no icloud account on it. i erased content and settings as previous owner had photos on it.icloud appearing after erased content. Stuck on activation screen now

    i bought iphone on donedeal.ie it had no icloud account on it. i erased content and settings as previous owner had photos on it.icloud appearing after erased content. Stuck on activation screen now
    what can be done?

    http://support.apple.com/kb/PH13695
    Theres no issue with the mother board.  It's the activation lock look at the link I provided.
    There is nothing you or Apple can do without the previous owners icloud information.
    Like I already stated you have a paperweight.

  • Brand new Ipod touch.  we attached to the computer because we don't have wifi.  Now what.  We set up in ID in itunes.  The Ipod won't do anything, just shows itunes on screen but won't budge.

    Brand new Ipod touch.  We attached to the computer because we don't have wifi.  Now what?  We set up in ID in itunes.  The Ipod won't do anything, just shows itunes on screen but won't budge.

    To get iTunes to see your iPod:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Maybe you are looking for

  • Cfdisk error, trying to install Arch

    When it comes to partition my HDD i have one 500GB partition containing Windows, and 500GB free space, yet when i come to manually set up the partitions using cfdisk i get this error: FATAL ERROR: Bad primary partition partition ends in the final par

  • Yet another Pacman front end in bash and zenity...

    (Disclaimer: It was a boring day . Had nothing else to do... Stumbled upon zenity...started playing around with it ...after 4 hours a crappy frontend was ready) Features: 1. search as you type. It is blazing fast 2. search as you type  So you can kee

  • V-e-r-y  s-l-o-w........ any help?

    I recently purchased a 30gb video ipod. Am in the process of uploading my itunes library. Can only upload 50-75 songs at a time or it freezes.... and it is unusually slow, even considering I have to use a USB port because it doesn't come with firewir

  • JEditorPane printing a HTML PAGE

    Hi, Here is my problem. I am displaying a HTML Page in a JEditorPane. So far so good. when I try to print is printing to my printer. Here is the problem the Text or to say the font doesnot look good in the paper, each letter is not nice and smoth and

  • Issue in Printing Smartforms through Dotmatrix Printer

    Hi, I have a Smartform which has many tables. When I print it through a Laser printer it comes out fine. But when I direct it through the Epson 2090 a 24 pin head dotmatrix printer some lines in the tables are not getting printed. May be it's that th