Unhappy with DV encoding for high action

I have been working on helmet cam video in iMovieHD, and then burn the project to disc in iDVD 6. The Best Quality encoding in iDVD is creating a great deal of compression pixelation, to the point it detracts from the viewability of the finished disc. Is there some mechanism to either force iDVD to use a higher bitrate for compression, or some other way to pre-encode my video assets from iMovieHD so I can use iDVD to create menus but have it leave the video assets alone?
I am wondering as well whether using Toast's custom encoding settings or DVD Studio Pro would permit me to tune for the visual performance I desire.
iMac 2.33 CoreDuo2 24" Mac OS X (10.4.8)

I should have clarified this, sorry. I am recording to MiniDV and going directly into FCExpress or iMovie. The market is becoming confusing with the advent of these low-cost MPEG-4 solid state recorders like the Aiptek which are suggested on lots of helmet cam discussion boards, and with the HDD recorders from Sony that create muxed MPEG-2 files.
The challenge I am having is at the step where the DV source is encoded for DVD by iDVD. The amount of compression here is tremendous, from 13GB of DV down to about 3GB that iDVD creates for a Best Quality setting. Still, the professional industry clearly has ways to deal with high motion as evidenced by the look of high-motion Hollywood DVD releases, so there has to be a way to improve quality beyond what I'm getting now.
Last night I tested with a short clip of Dakkar race footage from TV that I saved to DV format. I created a disc image from iDVD at Best Quality and from Toast 8 with average bitrate set to a high 7Mbps. I was able to notice some difference in this footage, but only when I step frame by frame to compare results. In contrast, the blockiness I get when encoding my helmet cam footage is on a gross scale.
This encoding quality stuff is hard to piece together!

Similar Messages

CSS 11000 series with load balancing for high availablity servers

Hi,
We have arrived at a designed,which has 2 PIX firewall(525)in a fault tolerant mode.Two interfaces from each of the PIX is connected directly to two css1000 switch which works in a fault tolerant mode.
other Two interface from each of the two css11000 switch is connected directly to two catalys 4003 switches to which we have Servers attached.
Pls let me know whether this design will work or If you could suggest some other design for high availablity servers which are kept at the DMZ.
Pls note in our design the internet user first hit the frewall and then the CSS11000 and then catalys 4003 and finally the Servers.
If anyone can help me out,pls send me a mail at [email protected]

Are the PIXes to be setup in a failover bundle?
If you use two interfaces in each PIX to connect
to the two CSS systems, are you not complicating the
setup? Which of the two should be called the inside?
I cannot recall whether you can have two inside legs at the current PIX level.

Applet: problem with cookie encoding for jar request (Firefox - Iplanet)

I have an applet working with a JAR file. When the JVM sends the request to the webserver for the JAR file, it adds to the request the existing domain cookies. However, one of these cookie is encoded, and on Firefox with Iplanet (webserver), it prevents the jar from being downloaded (server returns error 400).
Below the HTTP request (as given by Charles HTTP Proxy) for Firefox and Chrome. We can see that some characters differ for the aria_user_profile cookie.
Not working - FF
GET /LocalPrinting.jar HTTP/1.1
content-type: application/x-java-archive
User-Agent: Mozilla/4.0 (Windows XP 5.1) Java/1.6.0_21
Host: nceetvdev58-11.nce.XXXX.net
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Cookie: aria_user_profile={DS?!,!C!"ÍÔaÃæK?9eä|IC¦?!A:i?!?!7æâ!A7!*EÄ!,B¥È!8*0dà!4????ræÐq!6¦M!??"Z²!-!7s
Working - chrome
GET /LocalPrinting.jar HTTP/1.1
accept-encoding: pack200-gzip, gzip
content-type: application/x-java-archive
User-Agent: Mozilla/4.0 (Windows XP 5.1) Java/1.6.0_21
Host: nceetvdev58-11.nce.XXXX.net
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Cookie: aria_user_profile={DÀ?SÆ?!,!C!"ÍÔaÃæK?9eä|IC¦?!A:iÌ¤!?!7æâ!A7!*EÄ!,B¥È!8*0dà!4Ñ????ræÐq!6¦M!??"Z²!-!7sfÍ?-ÏT¤(çf!E
Is there a solution to this, by setting an encoding on the applet tag for instance?

JB.Hurteaux wrote:
Ok, sorry about that. I was planning on reporting the answers from one site to another though (if any :-))I'd generally prefer seeing a second post (or edited post) cross-linking the two.
Does not seem I can edit this one ..No. As soon as I replied to it (the only option to put the link) the original post become not editable. That is to protect the text in the thread - so later replies make sense(1).
That is one thing that is very different between stack overflow and these forums, obviously.
..(your answer will do),.. It gives the message.
..I updated the stackoverflow one.Cool.
1) E.G. If you'd edited the original post to add a link, or mention you were about to cross-post to stack overflow for reasons X/Y/Z, it'd make me look a complete buffoon, wouldn't it? ;-)

Oracle database integration with SAP PI for high volume & Complex Structure

Hi
We have requirement for integrating oracle database to SAP PI 7.0 for sending data which is eventually transferred to multiple receivers. The involved data structure is hugely complex (around 18 child tables) with high volume processing requirement (100K+ objects need to be processed in 6-7 hours). We need to implement logic for prioritizing the object i.e. high priority objects must be processed first and then objects with normal priority.
We could think of implementing this kind of logic in database procedures (at least it provides flexibility for implementing data selection logic as well as processed data can be marked as success in the same SP) but since PI sender adapter doesn't support calling Oracle stored procedures currently so this option is rules out. we can try implementing complex data selection using oracle table function but table function doesn't allow any SQL query which changes data (UPDATE, INSERT, DELETE etc) so it is impossible to mark selected objects in table function from PI communication channel "Update Query" option.
Also, we need to make sure that we are not processing all the objects at once as message size for 20 objects can vary from 100 KB to 15 MB which could really lead to serious performance issues for bigger messages.
Please share any implementation experience for handling issues:
1 - Database Integration involving Oracle at sender side
2 - Complex Data structures
3 - High Volume Processing
4 - Controlled data selection from database to contro the message size in PI
Thanks,
Panchdev

Hi,
We can call the stored procedure using receiver adapter using ccBPM, we can follow different approaches for reading the data in this case.
a) In this a ccBPM instance needs to be triggered using some dummy message, after receiving this message the ccBPM can make a sync call to the Oracle database the store procedure(this can be done using the specific receiver data type strucure), on getting the response message the ccBPM can then proceed with the further steps.The stored procedure needs to be optimized for improving the performance as the mapping complexity will largely get affected by the structure in which the stored procedure returns the message.Prioritization of the objects can be handled in the stored procedure.
b) In this a ccBPM instance can first read data from the header level table, then it can make subsequent sync calls to Oracle tables for reading data from the child tables.This approach is less suitable for this interface as the number child tables is big.
Pravesh.

Updating issues with Media Encoder for PC

Um I'm sorry if there was a post for this, but I couldn't find one as far as I know.
Okay I got my video all set to export from Premiere to the Encoder. I hear the sound and etc. After it gone through the encoder, the video comes out fine except it doesn't have sound yet it has sound in premiere.
I think the issue is that the Media encoder didn't update like premiere did, but when I tried to update it won't do it. I even manuallly downloaded the update files and try to install it that way, but it won't work. It doesn't even give me the option to do it. It says to quit the update for media encoder. I have 3 other programs that are doing the same thing too.
I don't know what to do. I don't think I can uninstall that program itself. Any suggestions? I can take screen shots of what happening if anyone needs me to.

Start reading the help file or manual, watch tutorials and get a basic edutation in NLE in general and CS4 in particular, if multiplexing is over your head currently. Multiplexing is one of the settings in AME.

Problem with iMovie settings for high quality YouTube videos.

I've used iMovie before, but now I'm using the new iMovie HD.
However, now, when I export my videos and upload to youtube. the Videos come out REALLY BLURRY, even though when I play it on my computer, they look fine.
I've been searching online, on youtube, looking for the correct settings but they never seemed to work.
Hopefully someone here knows the correct settings so that the video isn't extremely blurry when uploaded onto youtube?

You might want to try the forum for iMovie specifically. You're in the forum for Final Cut. You may get an answer here but you'll probably get it faster going to the right forum. I'm just saying. I haven't used iMovie since 2000 and I'm sure it's pretty different now.

Help Needed: Automator Applescript for Folder Action - Encode Video

Hi !
I have created an Automator Applescript for a Folder Action to do the following:
When a new video file is moved to the target folder (i.e. Download of Vuze is done), automatically launch the Applescript Action that does the followin g(Applescripted):
1) Using "run shell script" and FFMPEG on a UNIX command line, determine Width/Height, Framerate, Bitrate
2) Calculate encoding parameters (slightly reduced bitrate, reduced Aspect etc.)
3) Using "run shell script" with ffmpeg on the command line and the calculated parameters to encode the video file
At the same time, the action is written to a log file so I know if a file is recognized, when encoding started etc.
It works fine if I save this Action as an .app, make an alias on the Desktop and drop video files on it.
It also works fine if I attach the script to a folder as a folder action and drag a video file in there.
However, when I attach the script as a folder action to the Vuze download folder, it encodes only some video files, i.e. if there was a download of 5 files, chances are good that it will not encode 1 or 2 files out of those 5.
If for example a second download finishes while the encoding for the first download is still going on, sometimes the second file starts encoding after the first encode finishes, sometimes it does not, the file does not make the log file at all, i.e. the folder action missed it or the automator action dropped it because it was still encoding. Still, sometimes it happens, sometimes not.
As I need a solution that is 100% accurate, I would like to ask if there are any ideas on how to do this better maybe? As I am not an Applescript Guru, I would need some help to know what works and what doesn't and what the syntax is.
My main idea right now:
Similar to how ffmpegX works with its "process" application, have a second script (as .app) that receives the files to be encoded from the automator action and puts them in a queue, then proceeds to encode this queue while the main automator action is free to receive the next file.
Writing this second app is quite straightforward (a modified version of my current script) but I have some questions I need help with:
1) How do I call another applescript from within an existing applescript that launches the new applescript in a new process?
2) How do I pass parameters to this new applescript?
3) In case of this "Queueing" Idea, once I called the external applescript the first time, how do I make sure when I call next time, that I don't open a second instance of this script but rather pass another queue item to the original instance to be processed?
Or in general: Is there a better way to achieve this automatic encoding solution that I have not thought about?
Alternatively:
Does anyone know how to call the "process" application that comes with the ffmpegX package with the correct parameters to use as a queueing / processing tool?
Thanks!
Joe
Message was edited by: Joe15000
Message was edited by: Joe15000

To do this, I created an Automator workflow with an Applescript snippet to change the 'media kind'.
Here is the 'Run Applescript' workflow step code:
on run {input, parameters}
          tell application "iTunes"
                    set video kind of (item 1 of input) to movie
          end tell
          return input
end run
Prior to this running, I have an 'Import Files into iTunes' workflow step.
You can switch out 'movie' with: 'TV show', 'music video', or anything in ITLibMediaItemMediaKind.
Good luck,
Glenn

I received my new Verizon Edge bill in the mail and it is $80 higher than my old plan. I have been so unhappy with this change over. Went through hell getting our second phone activated because of a weird computer glitch and when we asked if we would re

I received my new Verizon Edge bill in the mail and it is $80 higher than my old plan. I have been so unhappy with this change over. Went through hell getting our second phone activated because of a weird computer glitch and when we asked if we would receive any consideration for the time, travel, and money we put into getting the phones the way they were supposed to be, we were told to wait until the bill came and then they could make adjustments. Now I have the bill and have no idea "who" the we would be that could make adjustments. To top it off, the only way I know my account will get any attention is to post this in chat. I am so disappointed and will be counting the months until our phones are paid off and we can change companies.

Call 800-922-0204
I just purchased a new device using Verizon Edge. Why does my bill look higher than normal?
There’s two reasons why your first bill after signing up for Edge might be higher than normal:
Prorate Charges – If you upgraded an existing line and did a price plan change, you may have price plan charges and credits that went into effect the day you upgraded.
Sales Tax – Most states require sales tax on the full retail price paid by the customer, which in most instances will be charged at the time of the first invoice.
Note: Customers who purchased devices in AL, AZ, CO, IL, NM, ND or SD will be billed taxes and surcharges monthly as payments are made.
Your bill will normally include:
Your last Edge installment payment
The next Edge installment charge
If you are on a MORE Everything Plan, a monthly access discount for each qualifying line.
The details of Edge installments and discounts can be viewed at the line level portion of your bill under Monthly Charges and Equipment Charges, or in My Verizon, My Bill then Charges By Line.

EEM for high CPU C4510R with SUP7E

Hi all,
I have a client that experiences high CPU usage on a pair of C4510Rs at random times. The issue causes their HSRP to flap which in turn causes network outages. It only seems to occur for around 10 to 15 minutes and by the time I am called to look into the problem it has passed. I suspect it is some type of traffic that is being CPU punted and is overloading the CPU and I would like to collect some CPU stats and CPU packet captures while the problem is occuring to further troubleshoot.
I used a previous C4510R EEM script (https://supportforums.cisco.com/thread/2065177) as a template and created the following script:
event manager applet cpu_stats
event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1 get-type exact entry-op ge entry-val "70" exit-op lt exit-val "70" poll-interval 5 maxrun 300
action 1.01 syslog msg "------HIGH CPU DETECTED----, CPU: $_snmp_oid_val %"
action 1.02 cli command "enable"
action 1.03 cli command "show clock | append bootflash:cpu_stats"
action 1.04 cli command "show proc cpu sort | append bootflash:cpu_stats"
action 1.05 cli command "show platform health | append bootflash:cpu_stats"
action 1.06 cli command "debug platform packet all count"
action 1.07 cli command "show platform cpu packet statistics | append bootflash:cpu_stats"
action 1.08 cli command "show proc cpu history | append bootflash:cpu_stats"
action 1.09 cli command "debug platform packet all receive buffer"
action 1.10 cli command "show platform cpu packet buffered | append bootflash:cpu_stats"
action 1.11 cli command "show proc cpu sort | append bootflash:cpu_stats"
action 1.12 cli command "show platform cpu packet statistics | append bootflash:cpu_stats"
action 1.13 cli command "Show proc cpu history | append bootflash:cpu_stats"
action 1.14 cli command "show platform cpu packet buffered | append bootflash:cpu_stats"
action 1.15 cli command "show log | append bootflash:cpu_stats"
action 1.16 cli command "undebug all"
end
However when looking at the CPU history after the problem occured again it appears that the SUP7E has one physical CPU that has two cores and one or two of the cores hits 100% when the issue occurs while the system CPU stays low as can be seen below:
C4510#show proc cpu hist
History information for system:
output omitted
    111111111115511111111111111111111111111111111111111111111111111111111111
    600105000112231001211131111017221011110001112010212016101010121012112112
100
90
80
70
60
50            **
40            **
30            #*
20 *    *     ##                *                       *
10 ########################################################################
   0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
             0    5    0    5    0    5    0    5    0    5    0    5    0
                       CPU% per hour (last 72 hours)
                    * = maximum CPU%   # = average CPU%
History information for core 0:
output omitted
               991
    888787888789968888787877787787888788787888879898888898888788
100            **
90            **
80            **
70            **
60            **
50            **
40            **
30            *#
20            ##*
10 ***********##***********************************************************
   0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
             0    5    0    5    0    5    0    5    0    5    0    5    0
                       CPU% per hour (last 72 hours)
                    * = maximum CPU%   # = average CPU%
History information for core 1:
output omitted
    211112111119921111111111111113111111111111111111111112111111
    855554544659906476955796556651995456554446767454847468565565
100            **
90            **
80            **
70            **
60            **
50            **
40            **
30 *          #*                *                       *
20 ******* **##** ***************** ****   **** * * * ********************
10 ########################################################################
   0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
             0    5    0    5    0    5    0    5    0    5    0    5    0
                       CPU% per hour (last 72 hours)
                    * = maximum CPU%   # = average CPU%
So I walked through the SNMP OIDs for the two cores without luck (also came across this article
https://supportforums.cisco.com/thread/2179888 to create SNMP OIDs for the cores by parsing the output of "show proc cpu" with a cron job). An SNMP walk of the CPU MIBs comes back with the following:
.1.3.6.1.4.1.9.9.109.1.1.1.1.3        - cpmCPUTotal5sec.5000
.1.3.6.1.4.1.9.9.109.1.1.1.1.4        - cpmCPUTotal1min.5000
.1.3.6.1.4.1.9.9.109.1.1.1.1.5        - cpmCPUTotal5min.5000
.1.3.6.1.4.1.9.9.109.1.1.1.1.6        - cpmCPUTotal5secRev.5000
.1.3.6.1.4.1.9.9.109.1.1.1.1.7        - cpmCPUTotal1minRev.5000
.1.3.6.1.4.1.9.9.109.1.1.1.1.8        - cpmCPUTotal5minRev.5000
Each of which seems to correspond with the system CPU. So in order to continue without creating an overly complex EEM scripts that parse the show proc cpu output and pass it to another EEM script that checks the value I decided to try a lower entry and exit value of 40%. The next time the problem occured the system CPU went over 40% but did not seem to trigger the script. What is important to note is the first time I did a full SNMP walk of the OID I was able to get the CPU over 50% and the script triggered.
So I moved down to 20% for the trigger value, tried with different SNMP OIDs like .1.3.6.1.4.1.9.9.109.1.1.1.1.6.5000 and doing an SNMP walk of the Cisco MIB without success in getting the script triggered (see attached output). Is there a problem with the script or the SNMP MIBs I am using?
Thanks in advance!
David.

Hi Joseph
I have written the following set of scripts to do the job (good to just post them here if anyone else is having the same problem!), I have tested individual components and they all seem to function as expected, so just waiting now for the high cpu event to occur again:
The first script is just to set the prev_cpu_state to low so the main script can detect the first transition to high and does not spit log messages out every minute because the context variable is not initialised:
event manager applet set_cpu_state
event none
action 1.01 handle-error type ignore
action 1.02 context retrieve key CPU_STATE variable prev_cpu_state
action 1.03 handle-error type exit
action 1.04 set prev_cpu_state "low"
action 1.05 context save key CPU_STATE variable prev_cpu_state
end
The second and main script checks the CPU level of both cores over 5 seconds and takes the highest of the two, if this is over 50% and the cpu state was previously low then it will trigger the third script.
event manager applet dualcore
event timer cron cron-entry "* * * * 0-6"
action 1.00 cli command "en"
action 1.01 cli command "show process cpu | include five"
action 1.02 regexp "Core 0: CPU utilization for five seconds: ([0-9]+)%" $_cli_result result c0cpu5sec
action 1.03 if $_regexp_result eq 1
action 1.04 end
action 1.05 regexp "Core 1: CPU utilization for five seconds: ([0-9]+)%" $_cli_result result c1cpu5sec
action 1.06 if $_regexp_result eq 1
action 1.07 end
action 1.08 handle-error type ignore
action 1.09 context retrieve key CPU_STATE variable prev_cpu_state
action 1.11 handle-error type exit
action 1.12 if $c0cpu5sec ge $c1cpu5sec
action 1.13 set highest_core $c0cpu5sec
action 1.14 else
action 1.15 set highest_core $c1cpu5sec
action 1.16 end
action 1.17 if $highest_core ge 50
action 1.18 if $prev_cpu_state eq low
action 1.19   set prev_cpu_state "high"
action 1.20   syslog msg "----HIGH CPU DETECTED----, CPU: $highest_core %"
action 1.21   cli command "event manager run collect_stats"
action 1.22 end
action 1.23 else
action 1.24 if $prev_cpu_state eq high
action 1.25   set prev_cpu_state "low"
action 1.26   syslog msg "----CPU BACK TO NORMAL----, CPU: $highest_core %"
action 1.27 end
action 1.28 end
action 1.29 context save key CPU_STATE variable prev_cpu_state
The third script just runs all of the require show commands for debugging the issue and appends the output to a file called cpu_stats on the bootflash:
event manager applet collect_stats
event none
action 1.02 cli command "enable"
action 1.03 cli command "show clock | append bootflash:cpu_stats"
action 1.04 cli command "show proc cpu sort | append bootflash:cpu_stats"
action 1.05 cli command "show platform health | append bootflash:cpu_stats"
action 1.06 cli command "debug platform packet all count"
action 1.07 cli command "show platform cpu packet statistics | append bootflash:cpu_stats"
action 1.08 cli command "show proc cpu history | append bootflash:cpu_stats"
action 1.09 cli command "debug platform packet all receive buffer"
action 1.10 cli command "show platform cpu packet buffered | append bootflash:cpu_stats"
action 1.11 cli command "show proc cpu sort | append bootflash:cpu_stats"
action 1.12 cli command "show platform cpu packet statistics | append bootflash:cpu_stats"
action 1.13 cli command "Show proc cpu history | append bootflash:cpu_stats"
action 1.14 cli command "show platform cpu packet buffered | append bootflash:cpu_stats"
action 1.15 cli command "show log | append bootflash:cpu_stats"
action 1.16 cli command "undebug all"
end
Regards,
David.

HT4623 if i am unhappy with new software then how to go for earlier version

if i am unhappy with new software the how to go for earlier version

Sorry, Apple has no approved method to downgrade the version of iOS on your iDevice. You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
http://www.apple.com/feedback/

I just signed up for Verizon 45 days ago and am unhappy with my service? I have decided to switch to another service provider. Are there any other cancellation fees on top of the $350 per line fee? Am I stuck with the phone?

I just signed up with Verizon 45 days ago and am unhappy with my service. I know about the ETF fee of $350/ per line but are there any other fees I will need to pay for the actual phone.

There are no other fees. You are not stuck with the phone, you can do whatever you would like to do with it.

How do I cope with the Adobe Media Encoder running high cpu consuming

Hi All
How do I cope with the Adobe Media Encoder running high cpu consuming.
This always happens when I do a render using Adobe Media Encoder CS6.
I was annoyed because I was 100% cpu.
is there a solution?
I use Adobe Media Encoder CS6 v6.0.3.1 (64bit)
System Information Report
Operating System: Microsoft Windows 7 Ultimate
System Type: 64 bit
Central Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz x4
User Name: Gepenk
Video Adapter: ATI Radeon HD 4600 Series
Video Memory: 1.00 GB
Screen Resolution: 1360 x 768
Total Memory: 7.98 GB
Free Memory: 5.69 GB
Total Hard disk: 931.41 GB
Free Hard disk: 102.02 GB
Mouse: USB Optical Mouse
Keyboard: Standard PS/2 Keyboard
THANKS

Some reading to explain both:
https://www.google.com/search?q=faster%2C+hyperthreaded+processor&oq=faster%2C+hyperthread ed%C2%A0+processor&aqs=chrome.…
Tweakers Page

Succinct encoding for binary tree with n nodes...

How do I find all possible bit strings (Succinct encoding) for a binary tree with order n? Can anybody give me an algorithm?

I associate the order of a tree with some sort of a search or traversal. What do you mean by a "+tree with order n+"?
Could you perhaps give an example of what you're looking for?

Lotus Traveler Address Encoding for Apple Devices Problems with Z10

Hi,
we have problems with the Lotus Traveler Address Encoding for Apple Devices IBM Notes and Domino wiki
We are running Traveler 9.0 with BES 10.1 and 10.1.0.2354 on the Z10.
When composing a new mail addresses from our Domino NAB are shown like this: [email protected] instead of the name. It seems to me that name search is first looking to the Internet address field in the Domino NAB. In our case this field is empty (and cannot be filled with an address). If the field is empty, the User name or the Short name field seems to be used. This fields are filled with Domino like names like John Doe/City/Company. The Traveler Server will convert these names (see link above) and the Device (Z10) should only show the common name instead of the converted name.
This is not working on our Z10s. The converted name is always shown like [email protected] and you don't know the real name.
Is the problem known? Any workarounds?
Edit: Further investigations have shown that the conversion works if you use an address in the mailbox the first time. If you use it later again, it is coming unconverted from the address chache. Also if you perform a remote search from the contacts app the converted name instead of the common name is shown.
Regards
Nico

Hi Friend,
While your idevices still having apps downloaded by the old Apple ID, Apple Store will ask you for the old Apple ID and password to updated them. But, if you delete all apps downloaded by the old Apple ID, then download again by the new Apple ID, Apple Store will not ask you anymore for the old one.
Hope it helps

High Fidelity for PPT actions

I am using Captivate 8, and according to all video tutorials, I should be able to click on high fidelity to transfer over all of my PPT recordings, hyperlinks, actions, etc. However, when I am on the main screen to import my PPT, it only gives me a link option. There is no box to check for high fidelity as there is in the video tutorials. Any other suggestions? I have a 47 slide PPT that is full of animations, actions, voice recordings, etc., and I would really like them to transfer over.

Hi there
I believe the High Fidelity option is only available for PowerPoint projects saved in PPTX format.
So my guess is that you are pointing to a PPT and not a PPTX.
Cheers... Rick

Unhappy with DV encoding for high action

Similar Messages

Maybe you are looking for