Unibody MBP owners with *working* external displays, please chime in.

Question

I'm trying to determine if there's any use at this time to try to exchange the MBP (unibody) I have now with another unit in the hopes of getting proper external display support. (To be clear, I'm referring to the external display problems many of us are having, like in this thread, and this one, and others.)
I'm sure there are others suffering from this problem who are simply seeking another datapoint in determining whether or not exchanging one's unibody MBP for another are of any use at this time. So the question here is:
If you have a unibody MBP, and you are successfully driving an external monitor without issue (using the Mini DisplayPort to DVI Adapter), can you kindly post the following information?
1) External display model (manufacturer and model)
2) External display screen resolution
3) Any information about DVI cable, length, brand if applicable, etc.
4) Have you confirmed proper operation in both 9400 and 9600 GPU modes?
5) If you know, is your MBP equipped with the 9c84 or 9c85 built-in display panel?
6) If your setup wasn't originally working, but now is working due to a unit swap or swapping out of the Mini DisplayPort to DVI Adapter with a new one, can you kindly note that?
Please do not consider yourself representative of a properly working external display setup if yours looks mostly good, with just minor artifacting--that is, for the purpose of this thread, please consider "working" to mean only perfectly normal operation of an external monitor from your unibody MBP.
Are all of the above points necessarily relevant? I don't know yet, but I figured it's best to try to get as much information from those who have working units, to try to determine what's relevant and what isn't.
Why am I asking this? Because I've already wasted enough time with this unibody MacBook Pro, now on my third unit, and I do not want to waste time making trips to the store to exchange units (and the time necessary for restoring to the new unit, etc.) if it's not going to help things. (The previous two replacements had nothing to do with this particular problem, and I didn't have my external display until the third unit, so have no idea if the previous two suffered from this particular problem or not.) If it seems that an exchange from one unibody MBP to another isn't going to help, then those of us who need to resolve this might learn more information with which to make a decision. Right now, I'm seriously considering exchanging for the current 17" MBP with matte display, even though it's not the new unibody design, and doesn't quite match up in the specifications with the new 15" MBP--I just need to get my setup working, and figure the older style of the 17" might be more tested and worked out.
Thanks in advance to those of you who fit the bill and answer these questions.
NOTE: If you have more relevant information to ask of those with working setups, please do; but please avoid the discussion of your problems if you're among the ones (like me) with external display issues, as there are other threads for the discussion of that (like the ones linked above). Ideally, I envision this thread as more populated by the responses of those with working setups.
Message was edited by: isonoise
Message was edited by: isonoise

Answer 1

Mine works perfect.. This is AFTER a logic board replacement for the 9600's BSOD problem
1) Dell 2007WMP
2) 1680x1050
3) Cable that came with monitor
4) Post repair only really using 9600, though 9400 seemed fine too
5) LG (9C84)
6) Logic board replaced last week for BSOD problem. (That board had external monitor refusing to wake problem as well).
Message was edited by: Robert Derelanko