Unicode conversion from 4.6C.

Hi All,
We are in the process of unicode conversion of existing 4.6C MDMP system. We need to find out following few things
1) Which languages are active in the system ?
2) We have run report RSCPINST which gives installed languages but how to find, out of these installed languages which are active?
3) After executing report RSCPINST there is a RED message "TCPDB contains more than one code page". When i checked table TCPDB it has following entries.
CPTRANSFLD CPPOOLCLUS
1100       1100
1401       1401
1500       1500
8000       8000
8500       8500
Is it normal OR How the entries should be in the TCPDB table for MDMP system ?
Please reply
Regards

Hi Nikhil,
1) Logon is possible if the language is added to profile parameter zcsa/installed_languages and the required code page is added to table TCPDB. In later releases, the language needs to be added via RSCPINST (which results in an entry in table TCP0I).
2) There is no such definition as "active language" in SAP systems.
3) In any MDMP system, you have multiple entries in table TCPDB - this is normal. The purpose of the warning in RSCPINST mainly wants to make you aware that MDMP is not supported anymore in ECC 6.0.
Best regards,
Nils Buerckel
SAP AG

Similar Messages

Unicode Conversion from 4.7 enterprise MDMP (URGENT)

Dear Experts;
We are getting ABAP Dumps in various HR transactions;
The following syntax error was found in the program /1PAPA/FEAT100PLOGI :
"The program "/1PAPA/FEAT100PLOGI" is not Unicode-compatible, according"
Is there any Program to generate these programes to be Unicode enabled...
Thanks in advance for all your efforts....
Best Regards
Aslam

Hi Aslam,
In case you are talking about customized transations and programs (z ones ) u can go to the attributes of that program and uncheck the Unicode checks active, save and activate. This will solve your problem
Reward if helpful.
Regards,
Tomesh

UC&UC Combined Upgrade and Unicode Conversion from 4.6c to Netweaver 7.01

Hi Gurus,
I need to do (UC&UC) from 4.6c to Netweaver 7.01, after reading SAP guide still unsure about exact STEPS how to execute this,
is there someone who has done, and pl. can explain STEPS how exactly to do that.
Thanks for your help in advance
sahmad

Thanks, documentation found

SAP Data File size considerably reduced after Unicode Conversion

Hello Experts
I have just performed a CUUC (Upgrade along with unicode conversion) from R/3 4.7 to ECC 6.0 EHP5. The data size that i earlier had was close to 463 GB (MSSQL MDF, LDF Files), after the data export to be converted to unicode the size was 45 GB (10% of actual data size, i feel this is normal after heterogeneous system copy), but after the import again the DATA file size is only 247 GB, is this normal ? or have i lost some data ? For ex, I tried checking tables like MSEG and the number of entries have reduced from 15,678,790 to 15,290,545.
Could you kindly let me know if there is a way to check from Basis perspective if i have not lost any data ? I have followed all the procedures as per SAP Standards.
Waiting for your quick reply.
Best Regards
Pritish

Hi Nicholas
Data is compressed during the new R3load procedure is understood, but why number of table entries have reduced is something which is still a question to me (in some cases increased as well) ? For example
                             Source          Target
STPO                  415,725          412,150
STKO                 126,710          126,141
PLAF                 74,671                   78,336
MDKP                 193,487          192,747
MDPB                 55,329                   63,557
Any suggestions or ideas ?
Best Regards
Pritish

Unicode Conversion check

Hello All,
We are doing Combined Upgrade and Unicode Conversion from 4.6C to ECC 6.0. We have listed all the Z programs and we need to do unicode conversion check for the same. Hence we have exported the Z programs and imported the same into our IDES server and completed the UCCHECK. But we were not able to activate the same as there are many references missing (example: Z tables). We planned for activating the Z programs in IDES server and use the corrected programs in the upgrade system. But we are not able to proceed due to activation problem
Could you please suggest any other alternative solution or best practise that needs to be followed? Should we upgrade our system to 6.20 / 6.40 Engine first for UCCHECK. Please suggest
Regards,
Anand

Hi ,
As per SAP bes practice there are 2 options
1) You copy and upgrade your SAP Basis 4.6c production system to at least WAS 6.10 (non-unicode) or higher. And here you can perform your preparation steps. You can call this system as UCCHECK system. This is the recommended option.
I had chosen it in my CUUC upgrade from 4.6c to ECC 6.0
2) Option 2 is you can install a sandbox system at lease on version 6.10(non-unicode) or higher. Note that if you choose this option you must make sure that the sandbox system should contain all DDIC objects that are used in Z programs or modified SAP programs.
Then create a transport with Z programs + modified SAP programs in your 4.6c system and import them in sandbox system.
now here you can perform your preparation steps.
Also I will recommend you please go through the CUUC guide. It will clear all your doubts.
Regards,
Sachin Rane.

Corrupted Number Ranges After Unicode Conversion

Hello Gurus,
Has anyone had corrpted number ranges after UC conversion
After a Unicode conversion the number ranges are no longer valid?
We are doing a Unicode conversion from Informix to DB6 unicode on AIX.
Kind Regards
Lawrence Brown

Hi Lawrence,
I never heard from any Unicode conversion customer that number ranges did not work anymore after the Unicode conversion. Maybe the DB migration plays a role here ?
Best regards,
Nils Buerckel
SAP AG

Pdf conversion from a non unicode system to a unicode system

Hi,
I have a BSP application that runs on a unicode system which retrieves data to be output in pdf from a non unicode sap system.
We get the data from the non unicode system through a RFC call and store data in table otfdata type itcoo, then we perform the conversion through the following:
perform pdfcnv_convertotf in program saplstxw
tables otfdata
pdf
using
'T'
archive_index
1
'T'
pdf_bytecount
app_tot_xstring
and then perform the hex conversion, but the printout is full of # chars. The good characters are followed by the # char. It looks like the unicode conversion is not good.
Thank you in advance for your help.
Best regards,
Donatella

Welcome to SDN
check out this weblog where Thomas Jung explains unicode conversion for excel, the same thing could be applied in your case as well
/people/thomas.jung3/blog/2004/08/09/bsp-download-to-excel-in-unicode-format
Regards
Raja

Technical upgrade from 4.6c to 6.0ecc with unicode conversion

Hi Experts,
Can you explain me technical upgrade from 4.6c to 6.0ecc with Unicode conversion.
if u got any notes pls send it to [email protected]
vijay

Check these links. Search SDN with Term "Upgradation" you will get lot of links
http://help.sap.com/saphelp_nw04/helpdata/en/16/4b3c88170e11d6999d00508b6b8b11/frameset.htm
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0f9f37c-be11-2a10-3baf-d5d7de5fb78d
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/system%2blandscape%2bconversion
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/project%2bplanning%2b-%2bmdmp%2bsystem
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/communication%2binterfaces
Message was edited by: Jason Lax (Removed link to deleted content)

Job logs from the original system after Unicode conversion.

Dear Globalization experts,
We are doing Unicode conversion and would like to know, if the Job logs from the batch jobs, executed before conversion (system with a 1100 code page), would be readable in the Unicode system after the conversion. We will move job log files from the source to the target system. I . Thank you in advance for your help.
Best regards,
Alik Shapiro

Hi Alik,
I have strong doubts that this will work ...
From SAP notes 842767 and 901004 you can see, that spool data will not be converted properly by default.
In general this is valid for data stored in TemSe, as this is by definition temporary data (see for example http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/content.htm ).
However I actually did not test it, so I am not 100% sure.
Best regards,
Nils Buerckel
SAP AG

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error while database export in package SAPDODS_33 (Unicode conversion)

Hello,
I am performing Unicode conversion on an upgraded BI 7.0 system. This is running on AIX/DB2.
When I take database export for conversion, one package fails (SAPDODS_33) with error "The file system is full". In fact, df -k doesn't show that any file system is full.
I am taking the export to the following location: /db2/BWS/sapdata/EXPORT_DIR
There are 3 system-managed temporary tablespaces: PSAPTEMP, PSATEMP16 & SYSTOOLSTMPSPACE which were residing in /db2/BWS/saptemp1/NODE0000. This was getting full during the export. Now these temp.tablespaces have been relocated to a new file system of size 15GB.
But still the package SAPDODS_33 doesn't get exported. Could you please let me know how to solve this issue?
Thanks a lot!
Sundar.
=====================================================================================
SAPDODS_33.log
(DB) INFO: connected to DB
(rscpsumg) Please look also into "SAPDODS_33012.xml".
(rscpMC) Warn: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(rscpMC) Warn: UMGCONTAINER has 1 problems.
(rscpMC) Warn: Global fallback code page = 1160
(rscpMC) Warn: Common character set is not 7-bit-ASCII
(rscpMC) Warn: Collision resolution method is 'fine'
(rscpMC) Warn: R3trans code pages = Normal
(rscpMC) Warn: EXPORT TO ... code pages = Normal
(rscpMC) Warn: Source is 'MDMP'
(rscpMC) Warn: I18N_NAMETAB_NORM_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_NORM_LOG   = 0
(rscpMC) Warn: I18N_NAMETAB_ALT_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_ALT_LOG    = 0
(rscpMC) Warn: I18N_NAMETAB_OLD_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_OLD_LOG    = 0
(GSI) INFO: dbname   = "BWS
(GSI) INFO: vname    = "DB6                             "
(GSI) INFO: hostname = "UNKNOWN
(GSI) INFO: sysname = "AIX"
(GSI) INFO: nodename = "itmlartdev01x"
(GSI) INFO: release = "3"
(GSI) INFO: version = "5"
(GSI) INFO: machine = "002417CA4C00"
(GSI) INFO: instno   = "0020169337"
(EXP) ERROR: DbSlExeRead failed
rc = 99, table "/BIC/B0000786000"
(SQL error -968)
error message returned by DbSl:
SQL0968C The file system is full. SQLSTATE=57011
(DB) INFO: disconnected from DB
/usr/sap/BWS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BWS/SYS/exe/run/R3load: END OF LOG: 20071211053119
p/sapinst/sapinst_instdir/NW04S/LM/COPY/DB6/EXP/CENTRAL/AS-ABAP/EXP #

Hi Sundar,
if the problem is due to a high temp space usage. The root cause is typically the
sort during export. If the table is large, the sort spills to temp.
You can avoid the sort by doing an unsorted export or tweak the DB2 optimizer to use the primary key to do the sort.
Before DB2 9, you can reduce the OVERHEAD tablespace parameter to zero. Return this value to its previous value after the successful export. This is a indirect hint to the optimizer that random IOs are cheap. This might not help.
With DB2 9, this should not happen, because the DB2_OPT_MAX_TEMP_SIZE=10240 registry variable is set under DB2_WORKLOAD=SAP which limits the temp space usage to 10GB if possible. You can reduce this parameter further if necessary. Another problem could be that the optimizer has chosen the wrong temp space. The optimizer choses the temp space with the largest amount of pages (not size).
Regards, Jens

Combined Upgrade and Unicode conversion of Sap 4.6C to ECC6.0

Hello all,
my project team intends to carry out a combined upgrade and unicode conversion of an SAP ERP 4.6C system with MDMP to ECC6.0 (no enhancement package). The system is running on Oracle 10.2.
In preparation for this upgrade, I have gone through the SAP notes 928729, 54801.
We need to get a rough estimate of the entire downtime so as to alert our end users. From the CU&UC documentation in 928729, I read up note 857081. However the program in this note cannot be used to estimate the downtime as my system is < SAP netweaver 6.20.
Is there any other SAP note or tool or program that I can use to estimate the downtime for the entire CU&UC? Thanks a lot!

Hi,
Combined upgrade depend upon number of factors like database size, resources on the server and optimization. In order to get idea of how much downtime, it will take, I would suggest you to do combined upgrade and unicode conversion on sandbox system which should be the replica of your production system. And try to optimize it. From there you can get approx. downtime required.
Also, please read combined upgrade and unicode conversion guides on http://service.sap.com/unicode@sap
Thanks
Sunny

SAP R/3 4.6 C to ECC 6.0 Upgrade using CU &UC method- Unicode conversion

Basis Gurus
   I am working on upgrade from R/3 4.6C to ECC 6.0.
ECC 6.0 upgrade completed( still in non Unicode). Now I am in the process of Unicode conversion.
I have used following methods for the upgrade.
1. Combined Upgrade & Unicode conversion(CU & UC)
2. Resource minimized( as I am doing it in Sandbox).
As I understand I need to perform the DB export and Import now for the unicode conversion.
According to the Upgrade document, First I need to run Export using R3load in ECC6.0(Non unicode)
and then install Unicode system and import the same data file.
My understanding was, when I choose, Resource minimized, I need to run Export and import
in the same system.
Can you please help me , whether I need another Unicode system for import ??
Graham

Hi,
Dont get confused with upg strategy and unicode conversion.
In general Upgrade strategy (either downtime-minimized/resource minimized)
In unicode conversion you have export/import(exp/imp) of data concept
In CU&UC approach you have to do in a streach to complete migrate from old release to new realease ECC 6.00.
Using database independent (sapinst only) or Using database dependent (migration monitor or Distribution monitor)
It can be done in 2 ways.
If you dont have addtional server for unicode conversion
       1)you can either do exp on same hardware and take bakup and do import using the exp dump.
       2)Do exp on one server and prepare your target empty database on another server and complete imp of data.
Hope this is clear.
Regards,
Vamshi.

Preparing for upgrade and Unicode conversion while on 4.6c

We're currently on 4.6c and preparing to upgrade to ERP 2005 and do a Unicode conversion. I'm trying to compile a list of coding techniques that can used in 4.6c that will minimize changes needed for Unicode. Does anyone have such a list?
Some things I've discovered reading about Unicode include:
1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc. This includes not moving structures/tables with non-character data to a character field or vice-versa.
3) Offsets can't cross non-character data.
4) Assign statement with offset must specify a length.
5) Open dataset must specify "FOR INPUT", "FOR OUTPUT", "FOR APPENDING", or "FOR UPDATE". It no longer defaults to FOR INPUT when omitted.
6) Many implicit conversions from char to numeric are no longer allowed. Use explicit conversion instead; such as the move statement.
I know there are others. Any help would be appreciated.
Regards,
Mark Perrey

Hai Mark
Check the following F.M Replacents
Upgrade Error Details     Suggestions
Function Module "DOCUMENT_REGISTRY_PROGRAM"not found in the target system     Suggest to replace this FM with the function module CV120_GET_APPL_FROM_REGISTRY.
Function Module "RP_HIRE+FIRE"not found in the target system     Suggest to replace this FM with the function module RP_HIRE_FIRE .
Function Module "ME_READ_HEADER_SINGLE" not found in the target system     Suggest to replace this FM with the function module ME_EKKO_SINGLE_READ.
Function Module "ME_READ_ITEM_SINGLE" not found in the target system     Suggest to replace this FM with the function module ME_EKPO_SINGLE_READ.
Function Module "RZL_ALERT_CONTROL" not found in the target system     Function Module "RZL_ALERT_CONTROL" is not available in the Enterprise Version. Suggest to use the function module "TH_SEND_ADM_MESS" to acheive the same functionality of "RZL_ALERT_CONTROL".
Function Module "MM_SELECT_ADDRESS" not found in the target system     Suggest to replace this FM with the function module MM_SELECT_PARTNER.
Function Module "MM_READ_ADDRESS" not found in the target system     Suggest to replace this FM with the function module MM_PARTNERS_FOR_MESSAGING
Function Module "ME_VALUES_T161" not found in the target system     Suggest to replace this FM with the function module HELP_VALUES_BSART.
Function Module "ME_VALUES_T024W" not found in the target system     . Suggest to replace this FM with the function module HELP_VALUES_WERKS.
Function Module "SD_PACKING_REFRESH" not found in the target system     Suggest to replace this FM with the function module HU_PACKING_REFRESH.
Function Module "SD_PACKING_RENAME" not found in the target system      Suggest to replace this FM with the function module V51P_PACKING_RENAME.
Function Module "RV_EXPORT_CONTROL_UPDATE" not found in the target system     Suggest to replace this FM with the function module RV_EXPORT_CONTROL_UPD_PREPARE.
Function Module "RV_INVOICE_COPY" not found in the target system     Suggest to replace this FM with the function module RV_SALES_DOCUMENT_COPY.
Function Module "SD_SCHEDULE_AGREEMENT_PACKING" not found in the target system     Suggest to replace this FM with the function module HU_PACKING_SALES_PROPOSAL.
Function Module "SERIAL_RENUM_WV" not found in the target system     Suggest to replace this FM with the function module IWOL_WV_SWITCH_NUMBER.
Function Module "CUD0_DISPLAY_CONFIGURATION" not found in the target system     Suggest to replace this FM with the function module VC_I_DISPLAY_CONFIGURATION.
Function Module "SD_PACKING_CREATE" not found in the target system     Suggest to replace this FM with the function module V51F_PACKING_CREATE.
Function Module "FI_ARCHIVE_CHECK_DOC" not found in the target system     Function Module FI_ARCHIVE_CHECK_DOC is not available in the Enterprise Version. Suggest to replace this FM with the function module FI_DOCUMENT_ARCH_CHECK_DOCS.
Function Module "OPEN_FI_CHECK" not found in the target system     Function Module OPEN_FI_CHECK is not available in the Enterprise Version. Suggest to replace this FM with the function module OPEN_FI_PERFORM_******_E.
Function Module "SD_PACKING_UPDATE"not found in the target system     Function Module SD_PACKING_UPDATE is not available in the Enterprise Version. Suggest to replace this FM with the function module HU_PACKING_UPDATE.
Function Module "F4_MACO" is being used in the program     Function Module "F4_MACO" is not available in the Enterprise Version. Since the Matchcode objects are not used in the Enterprise Version, Suggest to replace this FM with Search help's Value Request function module F4_SEARCH_HELP.
Function Module "SWZ_AI_RELEASE_S" is used in the program     Suggest to use the function module "SWZ_AI_RELEASE" instead of "SWZ_AI_RELEASE_S".
Function Module "SWW_WI_ORGTASK_READ" is used in the program      Suggest to replace this FM with the function module RH_WI_ORGTASK_READ.
Function Module "RH_READ_EXCEL_PATH" is being used in the program     Suggest to replace this FM with "RH_CHECK_EXCEL_SUPPORT".
Function Module "RZL_ALERT_CONTROL" is used in the program     Function Module "RZL_ALERT_CONTROL" is not available in the Enterprise Version. Suggest to use the function module "TH_SEND_ADM_MESS" to acheive the same functionality of "RZL_ALERT_CONTROL".
Function Module "CONVERT_TO_OTHER_CURRENCY" is used in the program     Suggest to ruse the function module "CONVERT_TO_LOCAL_CURRENCY" for currency conversion.
Function Module "LOAN_TABLECONTROL_SCROLLING" is not available in the Enterprise Version.      Suggest to replace this FM with the function module SCROLLING_IN_TABLE.
CALL FUNCTION 'DOWNLOAD' used in program is obsolete in target system.     "DOWNLOAD function module is obsolete and result in errors on Unicode systems or on systems that may potentially be Unicode enabled.
Suggest to use the unicode enabled methods
FILE_SAVE_DIALOG and GUI_DOWNLOAD
from class CL_GUI_FRONTEND_SERVICES.
Note:
However, to support existing applications, a compatibility mode was added to the function module(enhanced with Support Package) that will forward calls to DOWNLOAD to the new GUI_DOWNLOAD functions."
CALL FUNCTION 'HELP_VALUES_GET_NO_DD_NAME' used in program is obsolete in target system.     "HELP_VALUES_GET_NO_DD_NAME function module is obsolete and result in errors on Unicode systems or on systems that may potentially be Unicode enabled.
Suggest to use the function module F4IF_INT_TABLE_VALUE_REQUEST in the target system."
CALL FUNCTION 'POPUP_TO_CONFIRM_LOSS_OF_DATA' used in program is obsolete in target system.     "POPUP_TO_CONFIRM_LOSS_OF_DATA is obsolete in the target system.
Suggest to use function module POPUP_TO_CONFIRM."
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP' used in program is obsolete in target system.     "POPUP_TO_CONFIRM_STEP is obsolete in the target system.
Suggest to use function module POPUP_TO_CONFIRM."
CALL FUNCTION 'WS_DOWNLOAD' used in program is obsolete in target system.     "WS_DOWNLOAD function module is obsolete and result in errors on Unicode systems or on systems that may potentially be Unicode enabled.
Suggest to use the unicode enabled GUI_DOWNLOAD function module.
Note:
However, to support existing applications, a compatibility mode was added to the function module(enhanced with Support Package) that will forward calls to WS_DOWNLOAD to the new GUI_DOWNLOAD function."
CALL FUNCTION 'WS_FILENAME_GET' used in program is obsolete in target system.     "WS_FILENAME_GET function module is obsolete, and results in errors on Unicode systems.
Suggest to use FILE_OPEN_DIALOG und FILE_SAVE_DIALOG Unicode-enabled methods of the cl_gui_frontend_services class.
Note:
New applications should restart on these methods instead of the function module. The function module is extended by a Support Package so that it diverts calls to the methods without the application having to be changed."
CALL FUNCTION 'WS_UPLOAD' used in program is obsolete in target system.     "WS_UPLOAD function module is obsolete and result in errors on Unicode systems or on systems that may potentially be Unicode enabled.
Suggest to use the unicode enabled GUI_UPLOAD function module.
Note:
However, to support existing applications, a compatibility mode was added to the function module(enhanced with Support Package) that will forward calls to WS_UPLOAD to the new GUI_UPLOAD function."
Function parameters EBENE, GRUPP, DATE_LOW, DATE_HIGH, BANKK. BUKRS, S_BUKRS, S_DISPW in function module CASH_FORECAST_TR_SELECT_ITEM is missing in the target system.     "Function Module CASH_FORECAST_TR_SELECT_ITEM is no longer used, instead it has been split based on the functionalities.
Suggest to use function module
1) CASH_FORECAST_PR_SELECT_ITEM for Payment Arrangements.
2) For TR, WP, DA use function module CASH_FORECAST_TR_ITEM_2.
The IMPORT and TABLES parameters of the above 2 function modules are almost same as CASH_FORECAST_TR_SELECT_ITEM.
The IMPORT parameter BUKRS is not available in the above 2 function modules. Hence suggest to change the coding accordingly."
Import parameter BUKRS in function CASH_FORECAST_LO_SELECT_ITEM is missing in the target system.     "Import parameter BUKRS in function CASH_FORECAST_LO_SELECT_ITEM is not available in the target system.
Also the coding in Function Module based on the parameter BUKRS has been removed, instead the TABLES parameter S_BUKRS and S_GSBER has been used.
Suggest to check the coding in the program accordingly.
Import parameter BUKRS in function CASH_FORECAST_RE_SELECT_ITEM is missing in the target system.     "Import parameter BUKRS in function CASH_FORECAST_RE_SELECT_ITEM is not available in the target system.
Also the coding in Function Module based on the parameter BUKRS has been removed, instead the TABLES parameter S_BUKRS and S_GSBER(new parameter) has been used.
Suggest to check the coding in the program accordingly.
Function Module HELP_VALUES_GET_WITH_MACO is obsolete in target system     Suggest to use F4IF_FIELD_VALUE_REQUEST
Function Module G_OBJECT_GET is obsolete in target system.     Suggest to Use G_INTERVAL_GET_NEXT
Function Module READ_COSTCENTER is obsolete in target system     Suggest to Use K_COSTCENTER_SELECT_SINGLE
Function Module K_BUSINESS_PROCESS_READ_MULTI is obsolete or not available in target system     Suggest to Use K_PROCESSES_SELECT_TAB
G_SET_AVAILABLE     Suggest to Use G_SET_GET_INFO
Function Module G_SET_DOUBLE_CHECK is obsolete or not available in target system     "DO NOT CALL THIS FUNCTION MODULE
FROM 4.0A VERSION ,THIS PROBLEM WILL NOT OCCUR"
Function Module HELP_VALUES_GET is obsolete or not available in target system     Suggest to Use F4IF_FIELD_VALUE_REQUEST
G_SELECT_SET     Suggest to Use G_SET_SELECT
Function Module G_SET_AVAILABLE is obsolete or not available in target system     Suggest to Use G_SET_GET_INFO
Function Module NAMETAB_GET is obsolete or not available in target system     Suggest to Use DDIF_FIELDINFO_GET
Function Module DD_GET_DD03P is obsolete or not available in target system     Suggest to Use DDIF_FIELDINFO_GET / DDIF_TABL_GET
CALL FUNCTION 'POPUP_TO_CONFIRM_WITH_MESSAGE' used in program is obsolete in target system.     Suggest to use function module POPUP_TO_CONFIRM.
CALL FUNCTION 'POPUP_TO_DECIDE' used in program is obsolete in target system.     Suggest to use function module POPUP_TO_CONFIRM.
Function Module HELP_VALUES_GET_WITH_TABLE is obsolete or not available in target system     Suggest to Use F4TOOL_F4FUNCTION_BRIDGE
Function Module CLPB_EXPORT is obsolete or not available in target system     "Suggest to Use Suggest to use the unicode enabled methods
CLIPBOARD_EXPORT from class CL_GUI_FRONTEND_SERVICES."
Function Module SAP_TO_ISO_MEASURE_UNIT_CODE is obsolete or not available in target system     Suggest to Use UNIT_OF_MEASURE_SAP_TO_ISO
Regards
Sreeni

Unicode conversion in situ

Hi SCN,
I'm looking at the possibility of running a Combined Upgrade & Unicode Conversion (CUUC) in-situ; i.e. without a migration to new hardware.
However in all my years of SAP Basis projects any Unicode conversion I've seen has involved a migration to new hardware (which makes good sense as the process is the same as an OSDB migration with R3load/MigMon).
What I want to know is - has anyone ever run one in-place. I.e. keeping the same server and running the CUUC entirely inplace?
This seems logically problematic as you need a target system to import to.
I can imagine a process along these lines though...:
1. Take SAP layer offline
2. Run full backup of system
3. Export system
4. Drop database* (to make clean ready for new import)
5. Run SPUMG/SUMG/SAPINST to setup Unicode database ready to receive import...
6. ....and continue to run import into that database
7. Complete Unicode conversion process
However the big issue here for me is
(a) *dropping the live production system is far from attractive.... I'm presuming everyone would do as I've always seen and combine this with a migration to new improved hardware, so that a backout to the old system is simple
(b) I'm not sure at what point with the SAP tools (SPUMG/SUMG/SAPINST) this process would become convoluted with it all being in-situ on the same box. I.e. I'm not sure if it's something the SAP tools are really designed to cater for.
Any input/discussion on these points would be very welcome.
Regards, doonan_79

FYI Community. Feeling after reading and research is to use a temorary server to import unicode converted system data into; then swing disks back to the original host. Making all required hostname updates during the process.
Allowing for parallel export/import, but going back to the original configured host to complete the process.

Unicode conversion from 4.6C.

Similar Messages

Maybe you are looking for