Unicode Conversion Project Template

Hi,
My company is planning for BI Unicode Conversion. We are also planning a upgrade from 4.7 to ECC 6.0 with unicode.
I am required to create a project plan the BI unicode conversion project.Does anyone project Template for unicode conversion/upgrade project?
Thanks
Niveda

Did u got plan ??

Similar Messages

Effort estimate (ABAP) during Unicode Conversion project

Hi ,
I am working on a CU&UC (Combined Upgrade and Unicode Conversion) project from 46C to ECC6.
We are having 8 different codepages (MDMP SYSTEM) and around 10000 custom objects.
Does anyone have any experince in doing such kind of project ? I am looking at the effort estimate on technical side (ABAP) and functional side.
Any inputs of Technical effort in such a project with related number of codepages and custom objects will be useful (in man days & project duration).
Thanks
Dilip

Hi Dilip,
the main effort from ABAP side seems to be testing of the new system and creating the Unicode vocabulary. You need test teams and test plans for all locations and for the vocabulary you need people for all your languages. ABAP coding itself is probably not your biggest problem. You have to switch your system to unicode and then check all your sources. This could be done by a report or transaction (check the documentation regarding the Migration). From my point of view this is the main effort you'll have, testing and building the vocabulary. How big this effort is depends on your system. I think six month are a good time frame for the whole project (I assume you migrate a landscape of 3 systems). Because I'm working in the Basis administration I could not tell you the exact man days, but I would estimate up to two weeks for the vocabulary per language. You should have the numbers for the system tests from previous upgrades.
The technical migration effort depends on your hardware and time requirements. If your system is big (TBytes) and your downtime is very limited it could be necessary to tune the migration by testing it several times. If your requirements are not that high, then a single test migration could be sufficient. I've done two bigger migrations with 2.5 and 3.5 TB in less than 24 hours but therefore you have to have fast hardware and you have to tune your process well. If you have a single huge table this could destroy all efforts reaching your time target, if for example the index build could not be done in less then your time target. If you have enough hardware resources and time to tune your migration you could reach almost any time (which makes sense - some hours).
Best regards
Ralph Ganszky

Unicode conversion Project

Hi,
Any one tell me how to do the Unicode in ABAP ecc5.and explain how to use UCCHECK Tcode.

Did u got plan ??

SRM can not open attachment after unicode conversion

Hi,
Our system is SRM4.0, last week we do a unicode conversion project.
After we convert to unicode, some attachment in SC and PO can not be openned, these attachment file name include some chinese. If the attachment file name is all English, no problem to open it.
I think it is the cause by unicode conversion, do you have any idea what is the root of this problem?
Thanks.

Hi,
Please check in table :BBP_PDATT
If you have created a shopping cart with attachment. The attachment will be in the above table
Regards
G.Ganesh Kumar

Problem with field-symbols in UNICODE conversion

Hi all.
I'm in a UNICODE conversion project and I have a problem with a program that uses field-symbols.
DATA: BEGIN OF wa_data_aux,
        mandt LIKE zindices-mandt,
        kschl LIKE zindices-kschl,
        datab LIKE zindices-datab,
        valor LIKE zindices-valor,
        descripcion LIKE zindices-descripcion,
        ernam LIKE zindices-ernam,
        erdat LIKE zindices-erdat,
        waers LIKE zindices-waers,
      END OF wa_data_aux.
FIELD-SYMBOLS:
               <fs2> TYPE ANY,
               <fs3> LIKE wa_data_aux.
          <fs2> = <fs3>.
This assignment results in a DUMP.
Can anybody help me to solve this problem?
Thanks!!

TYPES: BEGIN OF wa_data_aux,
          mandt TYPE mandt,
          kschl TYPE kschl,
          erdat TYPE d,
          waers TYPE waers,
      END OF wa_data_aux.
DATA: w_aux TYPE wa_data_aux.
FIELD-SYMBOLS:
<fs2> TYPE ANY,
<fs3> TYPE wa_data_aux.
w_aux-mandt = '300'.
ASSIGN w_aux TO <fs3>.
ASSIGN <fs3> TO <fs2>.
WRITE : / <fs2>.
GBY.

Uicode Conversion Project - Question on transaction UCCHECK

Hello,
We are about to start an Unicode conversion Project. We have SAP 4.7C & we are going to make it Unicode enabled. In order to plan the ABAP/4 resource requirements precisely, I ran transaction UCCHECK to get the list of the development objects with Unicode errors. I have an urgent question with the way the transaction is executed:
When I run UCCHECK with selection screen option "Display lines that cannot be analyzed statically" , I get too many error & majority of them say that "the system couldnu2019t perform the check on the current statement & it can only be carried out at runtime" When I ran UCCHECK without option "Display lines that cannot be analyzed statically" , the total error count was way low u2026
Can someone please explain me the correct way to use transaction UCCHECK?
Thanks in avance,
Umang

Pl. see this help text. U can access the same from UCCHECK's selection screen.
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Also Display Modified SAP Objects
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.

UNICODE CONVERSION urgent

Hi friends,
can any one send the commom errors in unicode conversion project?

Hi ,
Hope it will help you,
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
Call transaction SAMT
Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Thanks
Jagadeesh.G

Combined Upgrade and Unicode conversion of Sap 4.6C to ECC6.0

Hello all,
my project team intends to carry out a combined upgrade and unicode conversion of an SAP ERP 4.6C system with MDMP to ECC6.0 (no enhancement package). The system is running on Oracle 10.2.
In preparation for this upgrade, I have gone through the SAP notes 928729, 54801.
We need to get a rough estimate of the entire downtime so as to alert our end users. From the CU&UC documentation in 928729, I read up note 857081. However the program in this note cannot be used to estimate the downtime as my system is < SAP netweaver 6.20.
Is there any other SAP note or tool or program that I can use to estimate the downtime for the entire CU&UC? Thanks a lot!

Hi,
Combined upgrade depend upon number of factors like database size, resources on the server and optimization. In order to get idea of how much downtime, it will take, I would suggest you to do combined upgrade and unicode conversion on sandbox system which should be the replica of your production system. And try to optimize it. From there you can get approx. downtime required.
Also, please read combined upgrade and unicode conversion guides on http://service.sap.com/unicode@sap
Thanks
Sunny

Unicode conversion in situ

Hi SCN,
I'm looking at the possibility of running a Combined Upgrade & Unicode Conversion (CUUC) in-situ; i.e. without a migration to new hardware.
However in all my years of SAP Basis projects any Unicode conversion I've seen has involved a migration to new hardware (which makes good sense as the process is the same as an OSDB migration with R3load/MigMon).
What I want to know is - has anyone ever run one in-place. I.e. keeping the same server and running the CUUC entirely inplace?
This seems logically problematic as you need a target system to import to.
I can imagine a process along these lines though...:
1. Take SAP layer offline
2. Run full backup of system
3. Export system
4. Drop database* (to make clean ready for new import)
5. Run SPUMG/SUMG/SAPINST to setup Unicode database ready to receive import...
6. ....and continue to run import into that database
7. Complete Unicode conversion process
However the big issue here for me is
(a) *dropping the live production system is far from attractive.... I'm presuming everyone would do as I've always seen and combine this with a migration to new improved hardware, so that a backout to the old system is simple
(b) I'm not sure at what point with the SAP tools (SPUMG/SUMG/SAPINST) this process would become convoluted with it all being in-situ on the same box. I.e. I'm not sure if it's something the SAP tools are really designed to cater for.
Any input/discussion on these points would be very welcome.
Regards, doonan_79

FYI Community. Feeling after reading and research is to use a temorary server to import unicode converted system data into; then swing disks back to the original host. Making all required hostname updates during the process.
Allowing for parallel export/import, but going back to the original configured host to complete the process.

Technical upgrade from 4.6c to 6.0ecc with unicode conversion

Hi Experts,
Can you explain me technical upgrade from 4.6c to 6.0ecc with Unicode conversion.
if u got any notes pls send it to [email protected]
vijay

Check these links. Search SDN with Term "Upgradation" you will get lot of links
http://help.sap.com/saphelp_nw04/helpdata/en/16/4b3c88170e11d6999d00508b6b8b11/frameset.htm
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0f9f37c-be11-2a10-3baf-d5d7de5fb78d
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/system%2blandscape%2bconversion
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/project%2bplanning%2b-%2bmdmp%2bsystem
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/communication%2binterfaces
Message was edited by: Jason Lax (Removed link to deleted content)

Performance during Unicode Conversion

Hello,
currently we are planning to do a Unicode Conversion on a Linux/MaxDB System.
The DB has a size of approx. 350 GB. The system runs on Fujitsu-Siemens FlexFrame hardware.
One problem is that during a test conversion the export of the DB took more than 24 hours.
This seems too much regarding the DB size.
We know that filesystem and RAM and CPUs influence the export duration.
What possibilities do we have to tune the export with "software" tools?
- table splitting
For example: Our largest table has ~26GB datasize.
How do we split this table?
In 10 parts or in 20 or in 200?
If you could please post your experiences.
Regards, Michael

I don´t wanna discourage you but I´m not sure if splitting that single table will help alot.
The problem with this combination is the fact, that the MaxDB database reads data block-by-block, means, exeucting single I/Os for each block to read. Given that fact and the fact, that each I/O will be ran over an NFS (with the known latency) it´s unlikely that you will get much more speed out of this.
The problem is NOT the speed between the NAS and the database server, if you will look on the network traffic you will see, that there´s plenty left. The problem is the latency on the client side (the database server) when you put your files on NFS.
I can export a 250 GB database in under 3 hours (admittedly - without UC conversion) using a direct fibrechannel connection (so non-NFS) so the database itself is certainly not the problem, it´s the combination of the usage of NFS (no matter if v2 or v3) and the way the MaxDB database reads data.
I´ve been involved in a likewise project and with a NetApp specialist and some in-depth tuning we were able to gain 15 - 20 % speed but not more.
Markus

Could you pls give the details about the Unicode conversion during Upgrade

Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
Padhy

Hi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
     submit zrppt500
     using selection-set 'AUTO3'
     with res_no eq lo_rsnum
     with sreserv in preserv
     to sap-spool destination p_dest
     immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
     Start of change for ECC6
     message e398(00) with 'Could not find access sequence'
     'for condition type:'
     p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
     End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
     VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya

Any one having , ABAP Check list for unicode conversion

Now I am in one upgrade project. Its new to me.
Can anyone have
ABAP checklist for unicode conversion in upgrade projects

Hello Uma,
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
Reward If Helpful.
Regards
Sasidhar Reddy Matli.

Regarding non-unicode to unicode conversion in mapping

In our project we have Pi system which is installed as unicode system.
But the SAP systems at the sender side is unicode and most of them are non-unicode systems.
We have a doubt regarding the challenges that we need to face in PI mapping with reference to unicode and non unicode conversion.
Is it possible for us to Map the RFCs of non-unicode SAP system at sender side with the help of graphical mapping?
Any conversion we need to do?
Thanks & Regards,
sasi
Edited by: sasitharan on Jan 6, 2009 4:25 PM

Thanks a lot for your replys.
In our customer lanscape they have following SAP R/3 vsesions 4.0B,4.5B.4.6B,4.6C,ECC 5.0,ECC 6.0
so how this unicode , non unicode settings varies with respect to versions?
Is it resembles same with respect to all the version?
Thanks & Regards,
Sasi

Unicode Conversion in Downtime Minimized Strategy

Hi,
Whether a Unicode Conversion can be done in a Downtime Minimized Strategy as what we have in Application Upgrade?
Regards,
Sam

No. Unicode conversion can be a easy project or a big project it depends on many factors lke developments, languages installed, product version, etc...
One of the steps of unicode conversion, is the EXPORT and IMPORT. During this time your system is unavailable.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/unicode%2bfaq
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_i18/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393238373239%7d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5001004f-ce99-2910-8fa9-c5e564a5f318
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_i18/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d363535333331%7d
cheers

Unicode Conversion Project Template

Similar Messages

Maybe you are looking for