Unicode in Project Planning Board Screen (CJ20N)

Hi,
I'm facing a problem of unicode as follows:
I inputed some unicode (Vietnamese) at Project Structure screen, It is ok. but when I switch to Project Planning Board screen, It don't work. I also cannot input Vietnamese with unicode at this view.
Text example: "Các công tác chuẫn bị"
Please help!
Thanks
Long

Hi,
Found something on Service.sap.com
Thought would be useful..
To access this page you need a login id for service.sap.com
https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000557148&
thanks..

Similar Messages

  • Unicode in Planning Board Screen (CJ20N)

    Hi,
    I'm facing a problem of unicode as follows:
    I inputed some unicode (Vietnamese) at Project Structure screen, It is ok. but when I switch to Project Planning Board screen, It don't work. I also cannot input Vietnamese with unicode at this view.
    Text example: "Các công tác chuẫn bị"
    Please help!
    Thanks
    Long

    Hi,
    Found something on Service.sap.com
    Thought would be useful..
    To access this page you need a login id for service.sap.com
    https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000557148&
    thanks..

  • Default print settings in the Project Planning Board CJ02N CJ2C

    Hello
    When you print the Project Planning Board CJ02N/CJ2C - there is an option to change the page setup.
    I would like to change the default settings for left,right, top and bottom margins for all users.
    Can anyone suggest where this would be done ?
    Thankyou
    Ros

    Hi Varun,
    Thanks for the fast repply!
    Please see below the CJ2C and CNE5 screen shots:
    Thanks and Regards
    James

  • Project planning board report to microsoft project report

    hi all
    good morning
    i want to convert the project planning board report to Microsoft project and primavera report ...
    please guide me through the steps......
    Thanks in advance
    Surya

    Hi,
    OpenPS for Microsoft project (OpenPS4MSP) is an Add-on to SAP R/3 Project System which enables users to transfer project related data between Microsoft Project and R/3 Project System.
    Refer SAP Note: 579761 for OpenPS.
    Then to integrate SAP and Primavera , you can use various integration tools available. One of them is Primavera Inspire.
    Refer :
    http://www.oracle.com/applications/primavera/primavera-inspire-for-sap.html
    Regards,
    Amit

  • Scheduling comparision in Gantt Chart- Project planning board

    Hi All,
    I Need to use the "Scheduling comparision" in Project planning board gantt chart. This is to compare the original status of activities before and after scheduling.
    But the "Scheduling comparision" button in the PPB does'nt seem to work.
    ( I am selecting the activity and then pressing the button for"display original status" )
    How do I use this functionality?
    Thanks in advance.

    Hi Potluri Srinivas ,
    After some tests, I still donot get, how does this functionalties work either.
    I assume, it is linked with the setting in 'option' -> 'planning board' -> 'diagramm area' -> 'orginal schedule'.  But I donot know, how the two things linked directly.
    If you find it out, please post it.
    Thanks and  regards,
    Zhenbo

  • Activity bar not displaying on Project planning board

    Dear All,
    I am getting one problem related to project planning board. I am working on a system in which when i am trying to run  project planning board, its coming but in that gant chart i am not able to see bar for activity. Bar for project definition and wbs coming properly. In tabular form also i can see the activities. But the only problem i am not able to see bar for activity with relationships. I have check almost all configuration related to project planning board profile and also scheduling proflies.
    Kindly suggest what can be the reason for the same.
    Regards
    Abhishek Sinha

    Hi Abdul,
    Thanks for reply. I have check all these options but all things are in place. OPT7 setting also right there. Kindly suggest what other setting can affect. In the planning board i can see the activity at left hand side corner with details but in gantt chart where we see bar chart for schdulines there activties are not coming.
    Kindly suggest.
    Regards
    Abhishek Sinha

  • Viewing CO versions in project planning board

    Hello,
    I have saved two CO versions of my project. When i go to the project planning board the approved plan column is full of data and looks great but the other version as no information. I have SAPALL so this isn't an authorization issue. Can someone please help me work out was is wrong?
    Thanks a lot
    Jason

    Hi,
       Basically there are possibilities of creating Plan version.
    1) one you can create in CJ40 by manually feeding the Version ex:0,1,2 etc....
    2) create one version in CJ40 and copy the same to another version in CJ9BS.
    once the versions are created make the changes of values in the respective versionand save the changes.
    Please check the version comparission in S_ALR_87013539 - Project Version Comparison: Plan.
    Comming to plan board which fields did you picked up for comparission?
    Rgds
    Sudhir Reddy

  • Network Header at  the Project Planning Board gantt chart

    Hi again,
    Does anyone knows a configuration to allow the network header to appear in the project planning board gantt chart?
    Tks
    James

    Try transaction OPT7
    Double click on the appropriate Profile
    On the Table Area Tab, select the flag for the field "Display Network"
    Hope this helps
    Regards
    Steve

  • Project Planning Board - Customising

    Hello All,
    Do we have an option to customize project planning board.
    If yes where exactly in SPRO can we do this, and does anyone have any documentation on what all can be configured in project planning board.
    Points assured.
    Thanks in advance.
    Warm Regards,
    Jatinder Bansal

    Project planning board customization is available at IMG. path IMG>PS>Structures>Project Planning Board.
    Planning Board is based on Gannt chart. the customization includes, Define Time Profiles, Define profiles for time scales ,  Define scale for the time axis, Define Profiles for the Project Planning Board, Maintain Report Assignment from the Planning Board & Capacity Leveling/Capacity Evaluations.
    Regards
    Murali

  • Small Font for Date in Project Planning Board

    Hello Friends?
    Iam Using ECC 6.0 C Version in our Company. iam facing a problem in <b>CJ2B</b> that Date is displaying in very small font. i could n't solve that problem till date. Can any body help me where can we make settings for making fonts size bigger for <b>dates</b> other than zooming in Planning Board.
    Appreciable for ur kind information.
    Thanks.

    Hi Hari,
    Once you are into CJ2B, Please follow the following steps:
    1. Click on the icon " Planning board Assistant"
    2. Select the gantt Chart----Misc. in diagram Area
    3. In the Selection of the "Text" of "Date Descript."--- Select "Dates one-line " ( This is applicable if your date is on the left or right side of the date bar)
    4. Now you can change the Font colour, Font and Font Size, Bold or Italic.....
    5. To Confirm the setting Click on "Update graphics" button on the screen.
    6. Now, If you notice, the dates fonts will be as per your requirement.
    If this does'nt work.. Try to explore in this area only..Probably try selecting other "Text" in the "date Descript."
    Hope this helps.
    Warm regards,
    Srinivas Potluri

  • Activity Confirmation  -  Gantt Chart  -  Planning board

    Hi
    suppose i have a activity duration from 1st february 2009 to 28th february 2009
    on 15th february i confirm 0nly 10% of the work as completed in the activity confirmation screen in the degree of processing field and also enter the start date as 1st february 2009 and the finish date as 15th february 2009.
    when we look at the planning board in CJ20n transaction subsequently (gantt chart) the activity bar shows a colouring from 1st february to 15th february instead of showing only 10% of the activity bar coloured for completion of the work
    where is it possible to see the percentage completion of an activity graphically as 10% this data is available in table format in CN48N transactio

    Hi,
    we can view in table format by selecting the fileds related to percentage of completion in the project planning board (gantt chart).
    The requirement you had explore is possible in MS projects, but in standard SAP we can't view in the graphically mode.
    Regards,

  • SAP project planninng board to primavera....

    hi all
    asking the question for the second time....didnt get the correct input yet..........
    i have used OpnePS and converted project data to Microsoft project........
    Can any one tell me how and wht are the requirement to convert project planning board data to primavera......
    Thanks in advance....
    Surya

    Dear Surya,
    What do you mean by convert PPB data to Primavera? Assuming that you want to export the PPB data to Primavera i would like to comment that like Open PS there is no free software available to carry out the conversion you are talking about..
    Either you have to take the help of your ABAPer and develop a source code to export the required data to Primavera or if u or ur organization can afford they can go for some softwares like Inspire etc..We had integrated SAP PS and Primavera P6 in our previous project with the help of ABAP development.
    Regards,
    Gokul

  • Project Scheduling in Planning Board

    Dear Experts,
    When I am scheduling the project (all wbse and network) through planning board, after clicking the schedule icon a pop-up window is coming and in the pop-up window it is written Select set of dates .
    Any idea why this pop-up is coming.
    How can I remove poping-up of Select Set of Dates Window.
    Thanking you.
    Best Regards,
    Abdul.

    Dear Mr. Virendra Pal,
    Thank you very much for the detailed reply.
    I have removed the tick for forcast date and actual date from set of dates view button on the planning board, and kept tick only for basic dates and earliets dates, Now the pop-up window is not coming, when I am clicking schedule icon.
    Thanking you.
    Best Regards,
    Abdul.

  • WBS in Planning Board

    Dear All,
    Need help in understanding how and when will the % duration of work which we get while confirming an acitivty will show up in higher WBS.
    Eg.
           WBS level 1                                   % duration of work doesnt show up (no time bar visible)
                               WBS level 2               % duration of work - doesnt show up (only actual time bar visible)
                               Activity 1                    % duration of work 20- visible in plan board
                               Activity 2                    % duration of work 20- visible in plan board
    Requirement at higher WBS it should show % duration of work as it shows in Microsoft project.
    Please Help
    Regards,
    Farhan

    Dear venkat,
    My problem is not solved can i send you the screen shot so that you can guide me .
    If yes please get me your ID.
    Regards,
    Farhan

  • Follow up to MRSS planning board how to populate

    Thanks for teh reply Varun. It was correct as I did not knwo that the create/save populate teh planning board data via the BADi.
    However 3 of the 4 added fields TPLNR, ABCKZ,  and ILARTa re being populated in the Order Change (IW32) transaction but the field called Remaining Work field OFMNW_2 is not. It is generally calculated when teh actual work in teh IW41 confirmation is changed to less than planned. I.E. if the planned work was 8 and the operator puts 4 in actual work, then the IW41 screen shows remeaining work field filled in with the difference (4).
    How can I populate this field via the BADi implementation PUSH_TO_MRS method.  I tried to link the user exit for confirmation save (Enhancement CONFPM05, user exit EXIT_SAPLCORF_005 INCLUDE ZXCOFU05) to then invoke the instance of the class method call in the user exit after saving the remaing work field in an EXPORT to MEMORY ID:
    Here is the code in the user exit that then fires off the BADI implementaion method PUSH_TO_MRS
    read table AFRUD_TAB index 1.
    EXPORT AFRUD_TAB-ISMNW to memory id 'z_OFMNW'.
    data z_ZCL_IM_MRSS_RSG_PM_INT type ref to ZCL_IM_MRSS_RSG_PM_INT.
    data zheader type BAPI_ALM_ORDER_HEADER_E.
    data wa_zCT_INFO type line of /MRSS/T_DEM_INFO_EXT_TAB.
    DATA: Z_DEM_H type /MRSS/T_DEM_H_EXT_TAB,
          zCT_ADM type /MRSS/T_DEM_ADM_WRK_EXT_TAB,
          zCT_PLR type /MRSS/T_DEM_PLR_EXT_TAB,
          zCT_PLRS type /MRSS/T_DEM_PLRS_EXT_TAB,
       zCT_INFO type /MRSS/T_DEM_INFO_EXT_TAB,
          zCT_TOOL type /MRSS/T_DEM_TOOL_EXT_TAB,
          zCT_RELAT type /MRSS/T_DEM_RELAT_EXT_TAB,
          zCT_QUALIF type /MRSS/T_QUALIF_REQ_DEM_EXT_TAB,
          zCT_ASSIGNMENT type /MRSS/T_***_KEY_EXT_TAB,
          zCT_STATUS type /MRSS/T_DEM_STATUS_EXT_TAB,
          zCT_PARTNER type /MRSS/T_DEM_PARTNER_EXT_TAB,
          zCT_OPERATIONS type /MRSS/T_DEM_OPERATION_TAB.
                                                                                    create object z_ZCL_IM_MRSS_RSG_PM_INT.
    z_zcl_im_mrss_rsg_pm_int->/mrss/if_ex_rsg_pm_int~push_to_mrs(
       EXPORTING
         is_header     = zheader
       changing
         ct_dem_h      = Z_DEM_H
         ct_adm        = zCT_ADM
         ct_plr        = zCT_PLR
         ct_plrs       = zCT_PLRS
         ct_info       = zCT_INFO
         ct_tool       = zCT_TOOL
         ct_relat      = zCT_RELAT
         ct_qualif     = zCT_QUALIF
         ct_assignment = zCT_ASSIGNMENT
         ct_status     = zCT_STATUS
         ct_partner    =  zCT_PARTNER
         ct_operations = zCT_OPERATIONS
      EXCEPTIONS
        failed        = 1
        others        = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
                                                                                    ENDIF.

    Hi Stephen...
    I think you are going wrong...
    From you post I understand that:
    1) You have implemented the user exit EXIT_SAPLCORF_005.
    Note: This is called when you enter the confirmation in IW41.
    2) Your understanding here is right that you need to integrate this information into MRS and you can do it from the above user exit.
    3) But you are wrong -- if you call the BADI here.
    Note: BADI methods will not work if you call them arbitrarily anywhere !! They work only when called in a specified program flow.
    The given BADI is called during the forward integration -- meaning when the order is saved. After the BADI is called MRS save is called and the data is saved in MRS.
    Calling the BADI method alone has not effect.
    I suggest that you read more information about BADIs and User Exits.
    Regards
    Varun.

Maybe you are looking for