Unicode Preconversion - SPUM4 Error

SPUM4 -
We are performing Preconversion : MDMP -> Unicode . In SPUM4 i have
completed the consistency check however i am unable to perform any
other scan . I choose different tab i.e Table without language info and
choose worker job , the job finishes in 2 sec and the scan has not
completed .
Steps for the Reconstruction -
Upgrade Sandbox - Spum4 - Tables with Language Info - Worker Job -
Monitor - Nothing . It does not scan anything . Simliar with other tabs
in there except consistency check .

Hi Harsh,
Are there any messages in the SPUM4 main log ?
Do you know which tables are involved ?
Does it solve the problem if you reset the scan state of those tables and redo the scan for those tables?
Cheers,
Vincent

Similar Messages

Unicode Preconversion - SPUM4 Issue

SPUM4 -
We are performing Preconversion : MDMP -> Unicode . In SPUM4 i have
completed the consistency check however i am unable to perform any
other scan . I choose different tab i.e Table without language info and
choose worker job , the job finishes in 2 sec and the scan has not
completed .
Steps for the Reconstruction
Upgrade Sandbox - Spum4 - Tables with Language Info - Worker Job -
Monitor - Nothing . It does not scan anything . Simliar with other tabs
in there except consistency check .

Hello Harsh,
There is an error in in consistentcy check pending.
To view the table in error, on consistency check scans, Click on Selection ->Status -->>E (error)
Resolve this error of table(s)
You able to proceed further to other scans..
Let me know if any issue further..
Amit Lal
SAP Consultant - I18N
[email protected]

Runtime error "DBIF_RSQL_INVALID_RSQL" during unicode preconversion SPUMG

Hi experts,
I was performing the unicode preconversion with spumg on ECC 5.0. The system environment is HP-UX 11.31 and Oracle 10g.
During the scan lever 2: tables without language info, there's always an error when scan table "VBSEGK", meanwhile the runtime error "DBIF_RSQL_INVALID_RSQL" raised in ST22. Below is some information regarding to this error.
Runtime error:
Runtime Error          DBIF_RSQL_INVALID_RSQL
Except.                CX_SY_OPEN_SQL_DB
Date and Time          30.05.2011 05:44:42
Error in ABAP application program.
The current ABAP program "UMG_SCANNER" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
An exception occurred. This exception is dealt with in more detail below
.The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was neither caught nor passed along using a RAISING clause, in the procedure "FETCH_NEXT"
"(METHOD)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The data read during a SELECT access could not be inserted into the
target field.
Either conversion is not supported for the target field's type or the
target field is too short to accept the value or the data are not in a
form that the target field can accept.
Thanks and Regards,
Kevin Yu

Hi Kevin,
this is probably caused by one or more incorrect / corrupt entries in table VBSEGK.
UMG_SCANNER reads the content of this table and is unable to do so for a specific entry.
Now it is necessary to find out, which entry causes this issue ...
Maybe your colleagues from the according application (FI-GL-GL-X) can help you ?
Best regards,
Nils Buerckel

Unicode Conversion : Import Error in ABAP SAPCLUST Error

Hi
I am doing the unicode conversion ..
The export of the database is successful.. But during the import it is giving an error.
Export is done as per note 552464 (Code Page 4103)
Platform is windows server 2003 / Oracle 10.2
Loading of 'SAPCLUST' import package: ERROR
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "CTSINTCOSNW5                                                    "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "CTSINTCOSNW5"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x Intel 801586 (Mod 4 Step 9)"
(DB) INFO: CLU4 deleted/truncated #20070301165425
myCluster (63.7.Imp): 2113: inconsistent field names (source) : physical field K1N05 appears as logic K1N5.
myCluster (63.7.Imp): 2114: further investigation recommended.
myCluster (63.7.Imp): 1952: error when checking key field consistency for logic table TACOPC    .
myCluster (63.7.Imp): 1955: logic table is canonical.
myCluster (63.7.Imp): 1958: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.7.Imp): 1252: unable to retrieve nametab info for logic table TACOPC    .
myCluster (63.7.Imp): 8096: unable to acquire nametab info for logic table TACOPC    .
myCluster (63.7.Imp): 2835: failed to convert cluster data of cluster item.
myCluster: CLU4       *00001*
myCluster (63.7.Imp): 320: error during conversion of cluster item.
myCluster (63.7.Imp): 323: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed
             rc = 2
.--============--
RSCP - Error
`----
(DB) INFO: disconnected from DB
D:\usr\sap\ABU\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ABU\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070301165425
Can any one help please ?
Thanks in advance

hi,
could you please have a look to SAP Note 902817 - Inconsistencies in cluster tables (log vs phys field name)
Cheers,
-Sunil

ADFS Active Authentication SAML token with unicode values throwing error when post to _trust end point in SharePoint

Hi All,
I have a SP2013 environment which authenticate users using ADFS 2.0 via Windows AD. We have two separate clients, Portal and Mobile. Portal users Passive Federation where as Mobile client uses Active Authentication with usernamemixed endpoint in ADFS.
I have an AD property which stores Unicode characters. In Active Authentication via Mobile, for a user who has a Unicode value in the AD property, I can get the SAML token successfully from ADFS.
Ex : <saml:AttributeValue>español</saml:AttributeValue>
However, when I post this SAML token to SharePoint _trust endpoint, I'm getting an error "500 Internal Server error". However for the same user, if I change the AD property value from "español" to "English" then I can get the FedAuth
cookie successfully from the _trust endpoint.
Also, for the same user, If I logged in via Portal which uses Passive Federation, then it's working fine.
Really appreciate your thoughts on this.
Supun

Hi Supun,
As you mentioned, the issue only happens in Active authentication. Would you please let me know which mobile client your users are using for the Active authentication, is it a custom one? Please be noted if you use a mobile browser, the authentication will
also be Passive.
In Passive mode authentication, STS also uses POST to pass the security token to the relaying party. I'd like to know what kind of tool you are using to post a SAML token to SharePoint endpoint as impersonation of an Active authentication. Since the Active
authentication flow is quite complex, I also suggest you to check the event log in your ADFS server, and try to find more information about the issue.
Thanks,
Reken Liu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unicode Conversion - CodePage Error

Hi,
I have gettin a dump when i try to execute a program.
The dump states :
While a text was being converted from code page '4110' to '4102', one
the following occurred:
- an character was discovered that could not be represented in one of
the two code pages;
- the system established that this conversion is not supported.
The running ABAP program, had to be terminated since
the
conversion could cause incorrect data to be generated.
7 characters could not be represented (and thus could not converted).
If 7 = 0, a second or a different error has occurred.
kindly let me know wat is happening ....
Answers will be rewarded!!!

Hi
Check in report attribute UNICODE check checkbox is active or not.
Message was edited by:
Priyank Patel

Unicode 'OPEN 004' error

Hi,
For OPEN DATASET statement, I get error OPEN 004 error in UCCHECK.
Can you please let me know what addition should be used to solve this problem?
ENCODING DEFAULT ??
ENCODING UTF-8 ??
ENCODING NON_UNICODE ??
As per SAP Help, I have added ENCODING DEFAULT but still not sure as I have seen ENCODING NON_UNICODE in some of the SAP standard programs.
Please advice.
Regards,
yogita

Hi,
Please find OPEN error in UCCHECK and how to correct the same
OPEN 004 --> Add ENCODING addition to statement i.e.
OPEN DATASET G_DATAFILE for OUTPUT IN TEXT MODE.
would be replaced with
OPEN DATASET G_DATAFILE for OUTPUT IN TEXT MODE ENCODING ON-UNICODE.
OPEN 002 --> IN..Mode is expected within open dataset command. i.e.
OPEN DATASET wfilepath FOR OUTPUT.
would be replaced with
OPEN DATASET wfilepath FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE. Or
OPEN DATASET wfilepath FOR OUTPUT IN BINARY MODE.
OPEN 001--> FOR INPUT, FOR OUTPUT, FOR APPENDING or FOR UPDATE expected! i.e.
OPEN DATASET wfilepath FOR OUTPUT.
would be replaced with
OPEN FOR OUTPUT DATASET wfilepath FOR OUTPUT IN TEXT MODE.
aRs
Points are always welcome.

Unicode conversion export error

Dears,
When we are doing unicode conversion of our ECC 6.0 system then during ABAP Database export, we are getting error as below:
INFO: allocate build_partition_list: 8192
INFO: processing ACCTCR.STR
INFO: processing ACCTIT.STR
INFO: processing BALDAT.STR
INFO: processing BSAS.STR
INFO: processing BSIM.STR
INFO: processing BSIS.STR
INFO: processing CKMI1.STR
INFO: processing COEP.STR
INFO: processing FMIFIIT.STR
INFO: processing GLPCA.STR
INFO: processing SAP0000.STR
INFO: processing SAPAPPL0.STR
INFO: processing SAPAPPL0_1.STR
INFO: processing SAPAPPL0_2.STR
INFO: processing SAPAPPL0_3.STR
INFO: processing SAPAPPL0_4.STR
INFO: processing SAPAPPL1.STR
INFO: processing SAPAPPL1_1.STR
INFO: processing SAPAPPL1_10.STR
INFO: processing SAPAPPL1_11.STR
INFO: processing SAPAPPL1_12.STR
INFO: processing SAPAPPL1_13.STR
INFO: processing SAPAPPL1_14.STR
INFO: processing SAPAPPL1_15.STR
INFO: processing SAPAPPL1_16.STR
INFO: processing SAPAPPL1_17.STR
INFO: processing SAPAPPL1_18.STR
INFO: processing SAPAPPL1_19.STR
INFO: processing SAPAPPL1_2.STR
INFO: processing SAPAPPL1_20.STR
INFO: processing SAPAPPL1_21.STR
INFO: processing SAPAPPL1_22.STR
INFO: processing SAPAPPL1_23.STR
INFO: processing SAPAPPL1_24.STR
INFO: processing SAPAPPL1_25.STR
INFO: processing SAPAPPL1_26.STR
INFO: processing SAPAPPL1_3.STR
INFO: processing SAPAPPL1_4.STR
INFO: processing SAPAPPL1_5.STR
INFO: processing SAPAPPL1_6.STR
INFO: processing SAPAPPL1_7.STR
INFO: processing SAPAPPL1_8.STR
INFO: processing SAPAPPL1_9.STR
INFO: processing SAPAPPL2.STR
INFO: processing SAPAPPL2_1.STR
INFO: processing SAPAPPL2_2.STR
INFO: processing SAPAPPL2_3.STR
INFO: processing SAPAPPL2_4.STR
INFO: processing SAPAPPL2_5.STR
INFO: processing SAPCLUST.STR
INFO: processing SAPCLUST_1.STR
INFO: processing SAPCLUST_2.STR
INFO: processing SAPCLUST_3.STR
INFO: processing SAPDDIM.STR
INFO: processing SAPDFACT.STR
INFO: processing SAPDODS.STR
INFO: processing SAPNTAB.STR
INFO: processing SAPPOOL.STR
INFO: processing SAPSDIC.STR
INFO: processing SAPSDOCU.STR
INFO: processing SAPSLEXC.STR
INFO: processing SAPSLOAD.STR
INFO: processing SAPSPROT.STR
INFO: processing SAPSSEXC.STR
INFO: processing SAPSSEXC_1.STR
INFO: processing SAPSSEXC_2.STR
INFO: processing SAPSSEXC_3.STR
INFO: processing SAPSSEXC_4.STR
INFO: processing SAPSSEXC_5.STR
INFO: processing SAPSSEXC_6.STR
INFO: processing SAPSSRC.STR
INFO: processing SAPUSER.STR
INFO: processing SAPUSER1.STR
ERROR: ExeModify for write_ddloadd failed in row 43184
       (rc = 26)
       objectname   = /BEV1/CLDEB~0
       objecttype   = PRKEY APPL0
       tabart       = APPL0
       rowcount     = 0
error message returned by DbSl:
ORA-00001: unique constraint (SAPPRD.DDLOADD~0) violated
Request you to kindly check and let me know what needs to be done for this error as we are unable to find any note or documents regarding this error.
Thanks & Regards,
Amit

Hi,
objectname = /BEV1/CLDEB0 objecttype = PRKEY APPL0 tabart = APPL0 rowcount = 0 error message returned by DbSl: ORA-00001: unique constraint (SAPPRD.DDLOADD0) violated
Its means duplicate entry is there under schema SAPPRD and object /BEV1/CLDEB~0, check appl0 log findout the table and entry.
Suman

Unicode Type Conversion Error

Hi Friend,
I am working in UNICODE project,i need one help,
I have one error .
Actually, im using one structure(Z0028) and passing values to internal table.
At that time i shows one error.
Actually,this error is due to type conversion problem.
In that structure,i ve one packed datatype ,so, if i select
unicode check it shows error.
I will sent example prg and error also.
Please give some solution to slove.
REPORT YPRG1                                   .
TABLES: Z0028.
DATA:I_Z0028 TYPE Z0028 OCCURS 0 WITH HEADER LINE .
SELECT * FROM Z0028 INTO TABLE I_Z0028 .
IF SY-SUBRC <> 0 .
WRITE:/ ' NO DATA'.
ENDIF.
LOOP AT I_Z0028.
    WRITE:/ I_Z0028.
ENDLOOP.
Regards,
Kalidas.T

Hi,
Display fields
do like this..
REPORT YPRG1 .
TABLES: Z0028.
DATA:I_Z0028 TYPE Z0028 OCCURS 0 WITH HEADER LINE .
SELECT * FROM Z0028 INTO TABLE I_Z0028 .
IF SY-SUBRC 0 .
WRITE:/ ' NO DATA'.
ENDIF.
LOOP AT I_Z0028.
WRITE:/ I_Z0028-field1,
              I_Z0028-field2
I_Z0028-field3.
ENDLOOP.
Regards,
Prashant

Unicode static check error

hi got the following error when running a uccheck with static parts enabled:
FORM DYNPRO_FUELLEN USING DBEGIN VALUE(FNAME) TYPE C
VALUE(FWERT) TYPE C.
DYNPROS-DYNBEGIN = DBEGIN. <---- this line gives error
the form is called alot of times:
PERFORM dynpro_fill USING 'X' 'SAPMF02D' '0106'.
PERFORM dynpro_fill USING ' ' 'RF02D-KUNNR' wo_debi-kunnr.
PERFORM dynpro_fill USING ' ' 'RF02D-BUKRS' wo_debi-bukrs.
PERFORM dynpro_fill USING ' ' 'RF02D-D0220' 'X'.
PERFORM dynpro_fill USING ' ' 'BDC_OKCODE' '/00'.
it says that with untyped operators no examination on convertibility is possible - runtime test required. I got the task to prevent all errors,so knowing that runtime test would succeed is not efficient!
my simple own solution would be to call the function not using 'X' but with zhelp whereas zhelp='X'....hm doesnt work

simple solution found,shortly after posting of course... dbegin type c in form declaration!

Unicode Name tab error DDNTT is newer than in DDNTT_CONV_UC

Hi experts,
Does anyone knows how to fix this issue.
(EXP) ERROR: entry for GREP in DDNTT is newer than in DDNTT_CONV_UC: 20100712221116 > 20100710215251
I am getting this during the export adn this is the only package that is failed, and I do understand that GREP table was changed after initial name tab was created and that is why I got that error. but my questiios is how do I fix this error to continue the export. Is that something I can set the status flag in the SAPNTAB.TSK flag from err to ok and continue with export? or do I have to fix this error before I can move forward. Please advice.
Thank in advance.
Kumar

Hi Kumar,
please use report UMG_SHOW_UCTABS to create a new entry for that table in the shadow nametab DDNTT_CONV_UC.
Also have a look at SAP note 932779, which explains the nametab handling in detail.
Best regards,
Nils Buerckel
SAP AG

Unicode - DataType Currency error

Hi experts.
Please can you help me?
I used below method instead of move clause.
I can transfer (wa_table> to buffer.
But i found ##―ఀ###ఀ ###ఀ contents in Buffer.
This filed of buffer is Curr(15.2) datatype.
Please Can notice me how can slove this problem ?
Thanks.
DATA: buffer(30000) OCCURS 10 WITH HEADER LINE.
DATA : st_table TYPE REF TO data,
tb_table TYPE REF TO data,
FIELD-SYMBOLS : <wa_table> TYPE ANY,
<it_table> TYPE STANDARD TABLE,
<wa_table2> TYPE ANY.
CREATE DATA : tb_table TYPE TABLE OF (query_table), "Object Create.
st_table TYPE (query_table).
ASSIGN : tb_table->* TO <it_table>, "INTERNAL TABLE.
st_table->* TO <wa_table>. "WORK AREA.
SELECT * FROM (query_table)
INTO CORRESPONDING FIELDS OF TABLE <it_table> WHERE (options).
LOOP AT <it_table> INTO <wa_table>.
CLEAR buffer.
CALL METHOD cl_abap_container_utilities=>fill_container_c
EXPORTING
im_value = <wa_table>
IMPORTING
ex_container = buffer
EXCEPTIONS
illegal_parameter_type = 1
OTHERS = 2.
APPEND buffer.
endloop.

Hello Kalidas
Here is a simple "smoke test". Try to see if the system accept the following statement:
" NOTE: Try to write the packed field only
WRITE: / i_z008-packed_field.
If you receive an error you cannot WRITE packed values directly.
Alternative solution: write your structure to a string.
DATA:
ls_z008 LIKE LINE OF i_z008,
ld_string TYPE string.
LOOP AT i_z008 INTO ls_z008.
CALL METHOD cl_abap_container_utilities=>fill_container_c
    EXPORTING
      im_value = ls_z008
    IMPORTING
      ex_container = ld_string.
WRITE: / ld_string.
ENDLOOP.
Regards
Uwe

Unicode issue: Codepage Error

Hello,
I get the following codepage error on executing a program :
A character set conversion is not possible.
At the conversion of a text from codepage '4110' to codepage '4102':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported.
Please suggest a solution for this.
I Codepage '4110' was hardcoded in the prg. I called FM 'NLS_GET_FRONTEND_CP' and used legacy text mode with dataset stmt.
=> OPEN DATASET w_outfile FOR INPUT IN legacy Text Mode code page l_codepage.
I dont get the dump now but get some junk characters.
Please help with this.

Please check the following link.
short dump like A character set conversion is not possible.

Khmer Unicode font run error in adobe presenter 7

I really don know why adobe cannot run well and have many problem like this , would you like help me this case i need solution .i will send to you this by the original file that i not yet publish and file that i publish ready .
do you see ? when i publish it become like this .

I see it a fair bit with Presenter 8 too. Not sure if it is an issue with PPT 07, Windows 8.1 (what I'm using for my OS) or something else. Usually I end up having to force all PPT processes (PPT does have one process that can keep running in the background) to quit after this message as Presenter becomes non-functional after I see it. Then I relaunch PPT and don't see the message.
Guess I always chocked it up to an issue of using two software manufactures at the same time. If there is a solution out there, I'd be interested to hear it.

Unicode conversion : SPUM4

Hi,
is it not correct that it does not matter which language you manually assign to not translated words, as long as the language you assign is in the same code page.
For example if I assign the German lanuage to a word actually in French, then still the Western European codepage is used and thus there is no problem afterwards?
We basically want to assign the German language to all "Western European" words, so we do not need to bother to switch to the correct language all the time. I believe that should work as long as you stay within the same code page.
Thanks for your comments.

your observation is correct. what you actually assign is not a language, but a codepage.

Unicode Preconversion - SPUM4 Error

Similar Messages

Maybe you are looking for