Unicode programming on Solaris.

Hi All,
I am very new to Solarsi and working on unicode programming on Solaris. But I am unable to find very basic APIs like wcsdup(), wtoi(), wtof(), snwprintf(). I am working on Solaris 10 with gcc 3.4.6. Please suggest me what could be the reason or these APIs are not on Solaris or I have to upgarade the gcc version to work on unicode programming ? Any pointer in the direction would be helpfull.
Thanks in advance.

Set an alarm timer in the parent process. Waitid for the child to complete.
- If the child completes, cancel the timer with alarm(0).
- If the timer pops, issue a kill -15/9 to the child process, then waitid to clean up the zombie. You can check for EINTR returned from your waitid and kill the child then if you don't want to do it in the interrupt handler.
Dave

Similar Messages

Dump error while executing this unicode program.....

Hi,
     I got a program for 'Production Order Quantity Change Daily Checklist' ,but while executing i got the dump error from the following program stating tat,
The current statement is only defined for character-type data objects.
Error in the ABAP Application Program
The current ABAP program "ZPROD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
For the statement
   "READ DATASET ... INTO f"
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "u". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
Program:
REPORT ZPPORDER LINE-SIZE 180 NO STANDARD PAGE HEADING
                LINE-COUNT 058(001).
TABLES: AUFK, "Order master data
        AFKO, "Order header data PP orders
        RESB, "Reservation/dependent requirements
        MAST, "Material to BOM Link
        STKO, "BOM Header
        STPO. "BOM item
DATA: BEGIN OF WA,
         AUART      TYPE AUFK-AUART,
         AUFNR      TYPE AUFK-AUFNR,
         AEDAT      TYPE AUFK-AEDAT,
         AENAM      TYPE AUFK-AENAM,
         WERKS      TYPE AUFK-WERKS,
         PLNBEZ     TYPE AFKO-PLNBEZ,
         GAMNG      TYPE AFKO-GAMNG,
         GASMG      TYPE AFKO-GASMG,
         MATNR      TYPE RESB-MATNR,
         POSNR      TYPE RESB-POSNR,
         BDMNG      TYPE RESB-BDMNG,
         BMENG      TYPE STKO-BMENG,
         MENGE      TYPE STPO-MENGE,
      END OF WA,
      ITAB LIKE SORTED   TABLE OF WA WITH NON-UNIQUE KEY AUFNR POSNR.
DATA: BEGIN OF ITAB2 OCCURS 0.
      INCLUDE STRUCTURE WA.
DATA: END OF ITAB2.
DATA: BEGIN OF ITAB_AUFK OCCURS 0,
      AUART LIKE AUFK-AUART,
      AUFNR LIKE AUFK-AUFNR,
      POSNR LIKE RESB-POSNR,
      AEDAT LIKE AUFK-AEDAT,
      AENAM LIKE AUFK-AENAM,
      WERKS LIKE AUFK-WERKS,
      PLNBEZ LIKE AFKO-PLNBEZ,
      GAMNG(7) TYPE P DECIMALS 0,
      GASMG(7) TYPE P DECIMALS 0,
      MATNR LIKE RESB-MATNR,
      BDMNG(7) TYPE P DECIMALS 0,
      BMENG(7) TYPE P DECIMALS 0,
      MENGE(7) TYPE P DECIMALS 3.
DATA: END OF ITAB_AUFK.
DATA: FDATE LIKE SY-DATUM,
      LDATE LIKE SY-DATUM.
DATA: X_AUFNR LIKE AFKO-AUFNR,
      X_MENGE(7) TYPE P DECIMALS 0,
      X_ERR(3).
DATA: W_DATASET1(500) VALUE '/usr/sap/trans/data/'.
SELECT-OPTIONS T_WERKS FOR AUFK-WERKS OBLIGATORY.
SELECT-OPTIONS T_AUFNR FOR AUFK-AUFNR.
SELECT-OPTIONS T_AEDAT FOR AUFK-AEDAT.
PARAMETERS     PDATA    LIKE W_DATASET1.
CONCATENATE W_DATASET1 PDATA INTO W_DATASET1.
PERFORM F_COLLECT_DATA.
FORM F_COLLECT_DATA.
OPEN DATASET W_DATASET1 FOR INPUT IN TEXT MODE encoding default.
DO.
     IF sy-subrc <> 0.
        EXIT.
     ENDIF.
     READ DATASET W_DATASET1 INTO WA.
     APPEND WA TO ITAB2.
ENDDO.
CLOSE DATASET W_DATASET1.
SELECT AAUFNR AAUART AAEDAT AAENAM A~WERKS
        BPLNBEZ BGAMNG B~GASMG
        CMATNR CBDMNG C~POSNR
     INTO CORRESPONDING FIELDS OF TABLE ITAB
     FROM          ( AUFK AS A
          INNER JOIN AFKO AS B ON BAUFNR = AAUFNR
          INNER JOIN RESB AS C ON CAUFNR = AAUFNR )
     WHERE A~AEDAT IN T_AEDAT
       AND A~WERKS IN T_WERKS.
     LOOP AT ITAB INTO WA.
        CLEAR MAST.
        SELECT SINGLE * FROM MAST WHERE MATNR = WA-PLNBEZ
                                    AND WERKS = WA-WERKS.
        CLEAR STKO.
        SELECT SINGLE * FROM STKO WHERE STLNR = MAST-STLNR
                                    AND STLAL = MAST-STLAL.
        CLEAR STPO.
        SELECT SINGLE * FROM STPO WHERE STLNR = MAST-STLNR
                                    AND POSNR = WA-POSNR.
        WA-BMENG = STKO-BMENG.
        WA-MENGE = STPO-MENGE.
        MODIFY ITAB FROM WA.
        AT NEW AUFNR.
           SKIP.
        ENDAT.
        LOOP AT ITAB2 WHERE AUFNR = WA-AUFNR
                        AND POSNR = WA-POSNR.
            IF ITAB2-GAMNG <> WA-GAMNG OR
               ITAB2-GASMG <> WA-GASMG OR
               ITAB2-BDMNG <> WA-BDMNG.
               CLEAR X_MENGE.
               IF ITAB2-BMENG <> 0.
                  X_MENGE = ITAB2-GAMNG / ITAB2-BMENG * ITAB2-MENGE.
               ENDIF.
               CLEAR X_ERR.
               IF ITAB2-BDMNG <> X_MENGE.
                  X_ERR = 'Err'.
               ENDIF.
               FORMAT COLOR COL_TOTAL.
               WRITE: / ITAB2-AUART UNDER 'Type',
                        ITAB2-AUFNR UNDER 'Prod Order',
                        ITAB2-AEDAT UNDER 'Last Chg Dt',
                        ITAB2-AENAM UNDER 'Last Chg by',
                        ITAB2-WERKS UNDER 'Plant',
                        ITAB2-PLNBEZ UNDER 'Material',
                   (10) ITAB2-GAMNG UNDER 'Order Qty' DECIMALS 0,
                   (10) ITAB2-GASMG UNDER 'Scrap Qty' DECIMALS 0,
                        ITAB2-POSNR UNDER 'Item',
                        ITAB2-MATNR UNDER 'Component Req',
                   (10) ITAB2-BDMNG UNDER 'Req Qty' DECIMALS 0,
                        X_MENGE      UNDER 'BOM Qty' COLOR COL_TOTAL,
                        ITAB2-BMENG UNDER 'BOM Base',
                        ITAB2-MENGE UNDER 'BOM Comp',
                        X_ERR        UNDER 'Rmks' COLOR COL_TOTAL.
               CLEAR X_MENGE.
               IF WA-BMENG <> 0.
                  X_MENGE = WA-GAMNG / WA-BMENG * WA-MENGE.
               ENDIF.
               CLEAR X_ERR.
               IF WA-BDMNG <> X_MENGE.
                  X_ERR = 'Err'.
               ENDIF.
               FORMAT COLOR OFF.
               WRITE: / WA-AUART UNDER 'Type',
                        WA-AUFNR UNDER 'Prod Order',
                        WA-AEDAT UNDER 'Last Chg Dt',
                        WA-AENAM UNDER 'Last Chg by',
                        WA-WERKS UNDER 'Plant',
                        WA-PLNBEZ UNDER 'Material',
                   (10) WA-GAMNG UNDER 'Order Qty' DECIMALS 0,
                   (10) WA-GASMG UNDER 'Scrap Qty' DECIMALS 0,
                        WA-POSNR UNDER 'Item',
                        WA-MATNR UNDER 'Component Req',
                   (10) WA-BDMNG UNDER 'Req Qty' DECIMALS 0,
                        X_MENGE   UNDER 'BOM Qty' COLOR COL_TOTAL,
                        WA-BMENG UNDER 'BOM Base',
                        WA-MENGE UNDER 'BOM Comp',
                        X_ERR     UNDER 'Rmks' COLOR COL_TOTAL.
             ENDIF.
        ENDLOOP.
     ENDLOOP.
   LOOP AT ITAB2.
        LOOP AT ITAB INTO WA WHERE AUFNR = ITAB2-AUFNR
                               AND POSNR = ITAB2-POSNR.
             DELETE ITAB2.
        ENDLOOP.
        SELECT SINGLE * FROM AUFK WHERE AUFNR = ITAB2-AUFNR.
        IF SY-SUBRC <> 0.
             DELETE ITAB2.
        ENDIF.
   ENDLOOP.
   OPEN DATASET W_DATASET1 FOR OUTPUT IN TEXT MODE encoding default.
        LOOP AT ITAB INTO WA.
           TRANSFER WA TO W_DATASET1.
        ENDLOOP.
        LOOP AT ITAB2 INTO WA.
           TRANSFER WA TO W_DATASET1.
        ENDLOOP.
   CLOSE DATASET W_DATASET1.
ENDFORM.
TOP-OF-PAGE.
    FORMAT COLOR COL_TOTAL.
    WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
         50 'Daily Qty Changed Checklist for Production Order',
        120 SY-PAGNO.
    SKIP.
    WRITE: / 'Plant ', T_WERKS-LOW.
    WRITE:   ' Last Change Date ', T_AEDAT-LOW, ' to ', T_AEDAT-HIGH.
    SKIP.
    WRITE: /1 'Type',
            6 'Prod Order',
            17 'Last Chg Dt',
            29 'Last Chg by',
            42 'Plant',
            49 'Material',
            69 'Order Qty',
            83 'Scrap Qty',
            99 'Item',
           105 'Component Req',
           121 'Req Qty',
           135 'BOM Qty',
           149 'BOM Base',
           163 'BOM Comp',
           178 'Rmks'.
     ULINE.
     WRITE: / 'Previous data :- '.
     FORMAT COLOR OFF.
     WRITE: / 'Current data :- '.
INITIALIZATION.
   LDATE = SY-DATUM.
   LDATE = LDATE - 1.
   FDATE = LDATE.
   MOVE:   FDATE         TO T_AEDAT-LOW.
   APPEND T_AEDAT.
   PDATA = 'AE001'.
So,give me any suggestions where to customize r do rectify the error.This will be useful for me.
Advance Thnx..

*REPORT ZPROD.
REPORT ZPPORDER LINE-SIZE 180 NO STANDARD PAGE HEADING
                LINE-COUNT 058(001).
TABLES: AUFK, "Order master data
        AFKO, "Order header data PP orders
        RESB, "Reservation/dependent requirements
        MAST, "Material to BOM Link
        STKO, "BOM Header
        STPO. "BOM item
DATA: BEGIN OF WA,
         AUART      TYPE AUFK-AUART,
         AUFNR      TYPE AUFK-AUFNR,
         AEDAT      TYPE AUFK-AEDAT,
         AENAM      TYPE AUFK-AENAM,
         WERKS      TYPE AUFK-WERKS,
         PLNBEZ     TYPE AFKO-PLNBEZ,
         GAMNG      TYPE AFKO-GAMNG,
         GASMG      TYPE AFKO-GASMG,
         MATNR      TYPE RESB-MATNR,
         POSNR      TYPE RESB-POSNR,
         BDMNG      TYPE RESB-BDMNG,
         BMENG      TYPE STKO-BMENG,
         MENGE      TYPE STPO-MENGE,
      END OF WA,
      ITAB LIKE SORTED   TABLE OF WA WITH NON-UNIQUE KEY AUFNR POSNR.
DATA: BEGIN OF ITAB2 OCCURS 0.
      INCLUDE STRUCTURE WA.
DATA: END OF ITAB2.
DATA: BEGIN OF ITAB_AUFK OCCURS 0,
      AUART LIKE AUFK-AUART,
      AUFNR LIKE AUFK-AUFNR,
      POSNR LIKE RESB-POSNR,
      AEDAT LIKE AUFK-AEDAT,
      AENAM LIKE AUFK-AENAM,
      WERKS LIKE AUFK-WERKS,
      PLNBEZ LIKE AFKO-PLNBEZ,
      GAMNG(7) TYPE P DECIMALS 0,
      GASMG(7) TYPE P DECIMALS 0,
      MATNR LIKE RESB-MATNR,
      BDMNG(7) TYPE P DECIMALS 0,
      BMENG(7) TYPE P DECIMALS 0,
      MENGE(7) TYPE P DECIMALS 3.
DATA: END OF ITAB_AUFK.
DATA: FDATE LIKE SY-DATUM,
      LDATE LIKE SY-DATUM.
DATA: X_AUFNR LIKE AFKO-AUFNR,
      X_MENGE(7) TYPE P DECIMALS 0,
      X_ERR(3).
DATA: W_DATASET1(500) VALUE '/usr/sap/trans/data/'.
SELECT-OPTIONS T_WERKS FOR AUFK-WERKS OBLIGATORY.
SELECT-OPTIONS T_AUFNR FOR AUFK-AUFNR.
SELECT-OPTIONS T_AEDAT FOR AUFK-AEDAT.
PARAMETERS     PDATA    LIKE W_DATASET1.
CONCATENATE W_DATASET1 PDATA INTO W_DATASET1.
PERFORM F_COLLECT_DATA.
FORM F_COLLECT_DATA.
OPEN DATASET W_DATASET1 FOR INPUT IN TEXT MODE encoding default.
DO.
     IF sy-subrc <> 0.
        EXIT.
     ENDIF.
     READ DATASET W_DATASET1 INTO WA.
     APPEND WA TO ITAB2.
ENDDO.
CLOSE DATASET W_DATASET1.
SELECT AAUFNR AAUART AAEDAT AAENAM A~WERKS
        BPLNBEZ BGAMNG B~GASMG
        CMATNR CBDMNG C~POSNR
     INTO CORRESPONDING FIELDS OF TABLE ITAB
     FROM          ( AUFK AS A
          INNER JOIN AFKO AS B ON BAUFNR = AAUFNR
          INNER JOIN RESB AS C ON CAUFNR = AAUFNR )
     WHERE A~AEDAT IN T_AEDAT
       AND A~WERKS IN T_WERKS.
     LOOP AT ITAB INTO WA.
        CLEAR MAST.
        SELECT SINGLE * FROM MAST WHERE MATNR = WA-PLNBEZ
                                    AND WERKS = WA-WERKS.
        CLEAR STKO.
        SELECT SINGLE * FROM STKO WHERE STLNR = MAST-STLNR
                                    AND STLAL = MAST-STLAL.
        CLEAR STPO.
        SELECT SINGLE * FROM STPO WHERE STLNR = MAST-STLNR
                                    AND POSNR = WA-POSNR.
        WA-BMENG = STKO-BMENG.
        WA-MENGE = STPO-MENGE.
        MODIFY ITAB FROM WA.
        AT NEW AUFNR.
           SKIP.
        ENDAT.
        LOOP AT ITAB2 WHERE AUFNR = WA-AUFNR
                        AND POSNR = WA-POSNR.
            IF ITAB2-GAMNG <> WA-GAMNG OR
               ITAB2-GASMG <> WA-GASMG OR
               ITAB2-BDMNG <> WA-BDMNG.
               CLEAR X_MENGE.
               IF ITAB2-BMENG <> 0.
                  X_MENGE = ITAB2-GAMNG / ITAB2-BMENG * ITAB2-MENGE.
               ENDIF.
               CLEAR X_ERR.
               IF ITAB2-BDMNG <> X_MENGE.
                  X_ERR = 'Err'.
               ENDIF.
               FORMAT COLOR COL_TOTAL.
               WRITE: / ITAB2-AUART UNDER 'Type',
                        ITAB2-AUFNR UNDER 'Prod Order',
                        ITAB2-AEDAT UNDER 'Last Chg Dt',
                        ITAB2-AENAM UNDER 'Last Chg by',
                        ITAB2-WERKS UNDER 'Plant',
                        ITAB2-PLNBEZ UNDER 'Material',
                   (10) ITAB2-GAMNG UNDER 'Order Qty' DECIMALS 0,
                   (10) ITAB2-GASMG UNDER 'Scrap Qty' DECIMALS 0,
                        ITAB2-POSNR UNDER 'Item',
                        ITAB2-MATNR UNDER 'Component Req',
                   (10) ITAB2-BDMNG UNDER 'Req Qty' DECIMALS 0,
                        X_MENGE      UNDER 'BOM Qty' COLOR COL_TOTAL,
                        ITAB2-BMENG UNDER 'BOM Base',
                        ITAB2-MENGE UNDER 'BOM Comp',
                        X_ERR        UNDER 'Rmks' COLOR COL_TOTAL.
               CLEAR X_MENGE.
               IF WA-BMENG <> 0.
                  X_MENGE = WA-GAMNG / WA-BMENG * WA-MENGE.
               ENDIF.
               CLEAR X_ERR.
               IF WA-BDMNG <> X_MENGE.
                  X_ERR = 'Err'.
               ENDIF.
               FORMAT COLOR OFF.
               WRITE: / WA-AUART UNDER 'Type',
                        WA-AUFNR UNDER 'Prod Order',
                        WA-AEDAT UNDER 'Last Chg Dt',
                        WA-AENAM UNDER 'Last Chg by',
                        WA-WERKS UNDER 'Plant',
                        WA-PLNBEZ UNDER 'Material',
                   (10) WA-GAMNG UNDER 'Order Qty' DECIMALS 0,
                   (10) WA-GASMG UNDER 'Scrap Qty' DECIMALS 0,
                        WA-POSNR UNDER 'Item',
                        WA-MATNR UNDER 'Component Req',
                   (10) WA-BDMNG UNDER 'Req Qty' DECIMALS 0,
                        X_MENGE   UNDER 'BOM Qty' COLOR COL_TOTAL,
                        WA-BMENG UNDER 'BOM Base',
                        WA-MENGE UNDER 'BOM Comp',
                        X_ERR     UNDER 'Rmks' COLOR COL_TOTAL.
             ENDIF.
        ENDLOOP.
     ENDLOOP.
   LOOP AT ITAB2.
        LOOP AT ITAB INTO WA WHERE AUFNR = ITAB2-AUFNR
                               AND POSNR = ITAB2-POSNR.
             DELETE ITAB2.
        ENDLOOP.
        SELECT SINGLE * FROM AUFK WHERE AUFNR = ITAB2-AUFNR.
        IF SY-SUBRC <> 0.
             DELETE ITAB2.
        ENDIF.
   ENDLOOP.
   OPEN DATASET W_DATASET1 FOR OUTPUT IN TEXT MODE encoding default.
        LOOP AT ITAB INTO WA.
           TRANSFER WA TO W_DATASET1.
        ENDLOOP.
        LOOP AT ITAB2 INTO WA.
           TRANSFER WA TO W_DATASET1.
        ENDLOOP.
   CLOSE DATASET W_DATASET1.
ENDFORM.
TOP-OF-PAGE.
    FORMAT COLOR COL_TOTAL.
    WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
         50 'Daily Qty Changed Checklist for Production Order',
        120 SY-PAGNO.
    SKIP.
    WRITE: / 'Plant ', T_WERKS-LOW.
    WRITE:   ' Last Change Date ', T_AEDAT-LOW, ' to ', T_AEDAT-HIGH.
    SKIP.
    WRITE: /1 'Type',
            6 'Prod Order',
            17 'Last Chg Dt',
            29 'Last Chg by',
            42 'Plant',
            49 'Material',
            69 'Order Qty',
            83 'Scrap Qty',
            99 'Item',
           105 'Component Req',
           121 'Req Qty',
           135 'BOM Qty',
           149 'BOM Base',
           163 'BOM Comp',
           178 'Rmks'.
     ULINE.
     WRITE: / 'Previous data :- '.
     FORMAT COLOR OFF.
     WRITE: / 'Current data :- '.
INITIALIZATION.
   LDATE = SY-DATUM.
   LDATE = LDATE - 1.
   FDATE = LDATE.
   MOVE:   FDATE         TO T_AEDAT-LOW.
   APPEND T_AEDAT.
   PDATA = 'AE001'.

Data objects in a Unicode program are not convertible?what does this mean?

hello,everyone,
when I execute a smartform directly in the transaction smartforms.,the result can be seen just no data.
when I execute program to transfer two internal tables from interface with data to the smartforms,and I use tcode st22,
the error is : Data objects in a Unicode program are not convertible.
the error analysis; The statement
"MOVE src TO dst"
requires the operands "dst" and "src" to be comvertible.
the source code that error occurs is :LOOP AT I_SHIP_DETAIL INTO WA_DETAIL .
and I know that the internal table have errors ,I defined the internal table refer to a structure created myself,and I set break-point in the smartforms ,can see the data in the internal table ,so why occurs such errors ,pls help me if you know .thank you in advance.

hi
good
go through this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50
thanks
mrutyun^

ABAP program issues..Unicode program "ITAB" must have the same structure?

Dear Expert,
I coded below code in se38, but system give below error message, could please kindly advie issue reason? Thanks!!
Error message: A line of "ITAB" and "LINE" are not mutually convertible. In a Unicode program "ITAB" must have the same structure layout as "LINE" independent of the length of a . Unicode character. Unicode character.
REPORT ZTEST_HIHIHI.
Data: begin of line,
num type i,
sqr type i,
end of line,
itab type standard table of line with key table_line.
Do 5 times.
line-num = sy-index.
line-sqr = sy-index ** 2.
append line to itab.
enddo.
loop at itab into line.
write: / line-num, line-sqr.
endloop.
clear itab.

Hello Hoo Laa,
This is because the way you have defined LINE, it is a structure & not a data type. Hence you are facing the issue
You have to change the data declaration to:
itab LIKE STANDARD TABLE OF line WITH KEY table_line.
BR,
Suhas

In unicode programs how to handle unix files

Hi Abapers,
In Unicode programs.
while transfering file from unix directory to pdf format, logo is missing in that pdf file .
how to handle this error.
Thanks,
Praveen

have a look
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a35b0b-de0a-2a10-4ea5-dd82e6bbd74d
Regards
Shashi

In Unicode Programs , the "-" CHARACTER CANNOT APPEAR IN NAME

HI,
I am checking the routines for the transfer rules(0SRM_GLSPEND_INVOICE) in the ODS Object (0GLS_INV).
WARNING :In Unicode programs, the "-" character cannot appear in names, as it does here in the name
" L-LOCAL_ID"
this is only before unicode conversion .
thanks & regards
subba reddy.

HI,
I am checking the routines for the transfer rules(0SRM_GLSPEND_INVOICE) in the ODS Object (0GLS_INV).
WARNING :In Unicode programs, the "-" character cannot appear in names, as it does here in the name
" L-LOCAL_ID"
this is only before unicode conversion .
thanks & regards
subba reddy.

Non-unicode program support?

Hi, I'm new to mac. In Windows' international setting, I can select a language to use for non-unicode programs, so that non-unicode characters in the selected language (such as song tags) can be displayed properly. But in Leopard, I cannot find the equivalent setting. Some songs with non-unicode tags are not displayed properly in iTunes, although they are fine in iTunes on my Windows computers. Also, I have some non-unicode contact information in Palm Desktop synchronized from my Treo phone. It looks OK in Palm Desktop on Windows, but not on Leopard.
Does such setting exist in mac os x?
Thank you.

Does such setting exist in mac os x?
No, OS X only uses Unicode, so you have to convert the legacy character set stuff to that.
Of course some apps, like TextEdit and Safari and Mail, can read things in legacy charsets, but they convert it to Unicode when they do. TextEdit can also save things in legacy charsets.

Converting control characters to spaces in a Unicode program?

I want to take an ASCII character string and convert any
ASCII Control Characters to Spaces.
In a non-Unicode program, I define the following hex constant:
CONSTANTS: c_control_to_space(64) TYPE x VALUE
'00200120022003200420052006200720082009200A200B200C200D200E200F20' &
'10201120122013201420012016201720182019201A201B201C201D201E201F20'.
I then execute the following TRANSLATE statement:
      TRANSLATE w_transcript USING c_control_to_space.
What would be the "approved" method of accomplishing the same effect
in a Unicode program?

Neil,
First, thank you for pointing out my typo. You are correct that the "0120" in the second line of the literal was intended to be "1520".
Second, thank you for your suggestion. Based on your idea, I tried something similar, but not exactly what you suggested. In particular, since I can't figure out how to construct the constant that I want, I used your idea to construct it as a variable, as follows:
DATA number TYPE i.
DATA offset TYPE i.
DATA hex(4) TYPE x.
FIELD-SYMBOLS <char> TYPE c.
ASSIGN hex TO <char> CASTING TYPE c.
DATA w_control_to_space(64) TYPE c.
DO 32 TIMES.
    hex = sy-index - 1.
    offset = 2 * ( sy-index - 1 ).
    number = STRLEN( <char> ).
    IF number GT 1.
      SUBTRACT 1 FROM number.
      SHIFT <char> LEFT BY number PLACES.
    ENDIF.
    w_control_to_space+offset(1) = <char>.
ENDDO.
After having constructed "w_control_to_space", I can now use the TRANSLATE statement:
TRANSLATE w_transcript USING w_control_to_space.
This code passes the Unicode syntax checks and works correctly on a non-Unicode system. I don't have access to a Unicode system on which to run it. I'd appreciate any feedback on this approach - especially if someone can actually test it on a Unicode system.

Problems realted to changing the language for non-Unicode programs from one into anther.

Hi,
Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language
and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs
is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however,
when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is
Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into
English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal
for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while language used
for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language
Arabic to be shown properly, then then I
must let the language for non-Unicode programs be Arabic.
Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs
must be in my Arabic lanague English and whatever location and format are.
Is this happened with you as well?
I would highly appreciate any clarification from you.
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
I am confused about your issue.
when you changed language for non-Unicode programs into English, it show English.
while language for non-Unicode programs is Arabic, it show Arabic, If it's none-Unicode.
This is correct. Why you think it's an issue?
About your second scenario description, I was not clear what you said. Could you give us a explanation?
Note: System display language is not the un-Unicode program language.
You can just choose one language to display the system at same time.
This article might be helpful to you:
Install or change a display language
http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
Change the system locale
http://windows.microsoft.com/en-in/windows/change-system-locale#1TC=windows-7
Karen Hu
TechNet Community Support

Problems realted to changing the language for non-Unicode programs

Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however, when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while langauge used for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language Arabic to be shown properly, then then I must let the language for non-Unicode programs be Arabic. Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs must be in my Arabic lanague English and whatever location and format are. Is this happened with you as well?
I would highly appreciate any clarification from you.
This question was solved.
View Solution.

Hi cooperator,
I saw your post regarding the language questions and I will be happy to help. What are you are experiencing with the languages is normal. The base operating system is in English and while you can change the display language the core kernal of the operating system would be in English.
The reason that the Intel Graphic and Media Control Panel is in English and the rest in Arabic is because the driver would have been designed in English and is hard coded as into the driver but the display language is set to Arabic. So when the language is set to English everything will be in English.
The reason you having issues extracting drivers when you English set at the language is because the HP website will determine where in the world you and when you download the driver it will be the appropriate language for the country you are from. So when it extracts it will look for the proper extraction path using Arabic but everything is English. It work no problem when you are on Arabic because the driver can read the path properly.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Are not mutually convertible in a Unicode program

Hi guys,
I'm getting error: "LS_EDIDD-SDATA and LS_STRUCTURE are not mutually convertible in Unicode Program"
I have PRKST which is Amount field in LS_STRUCTURE, which causes this problem.
But if I change type of PRKST to CHAR15, then it doesn't give error.
But i want to use this field with type PRKST( CURR 11, decimal places 2).
Please help. Its urgent.
Thanks,
Mehul Lad
Moderator message - "Urgency" is not allowed in the forums. Read the RoE.
Message was edited by: Suhas Saha

Hi,
LCHR field is not a standalone field. It is always preceded by a field of type INT2 which has the length of the data stored in LCHR field.
So, in structure LS_EDIDD there should be a INT2 type field just before the field SDATA which tells the length of the actual value in SDATA. Suppose the field name is LEN.
So,
assign the value like this :
LS_STRUCTURE = LS_EDIDD-SDATA(LS_EDIDD-LEN).
Regards,
Ashish

In unicode program, the "-" character cannot appear in names, as it ......

Hello,
Very Good Evevning!
When I am actiavting my program I am receiving the following error message.
In unicode program, the "-" character cannot appear in names, as it does here in the name "CHAR-".
What is this error message and what does it mean...?
Any suggetsions would be appreciated...
Regards,
Kittu

Hello,
When we activate, it does not throw any error message...The above Unicode error message will not stop us from activating our program.
It seems that this is due to inconsistency between the servers...If any one has any explonation regarding the Above Unicode error then please let me know.
Regards,
Kittu

From SRM to R3 po in extended classic : UNICODE PROGRAM ERROR

1.Today I observed that while sending the PO data from SRM to R3 we are getting following error -
"Data objects in a Unicode program are not convertible"
Request you to please look into it on priority.
SEKHAR

short dump(UC_OBJECTS_NOT_CONVERTIBLE)
Data objects in a Unicode program are not convertible?what does this mean?
Virtual Char error - UC_OBJECTS_NOT_CONVERTIBLE
/message/1069612#1069612 [original link is broken]

Error -not mutually convertible in a Unicode program

Hi all,
          I have declare my internal table and workarea as below ...
TYPES: BEGIN OF t_mara,
        matnr type mara-matnr,
       END OF t_mara.
DATA : it_mara TYPE t_mara OCCURS 0 WITH HEADER LINE.
DATA :wa_mara like mara-matnr.
when iam loopimg my internal table into work area(like loop at it_mara into wa_mara ......) .. iam getting below error
A line of "IT_mara" and "wa_mara" are not mutually convertible in a Unicode program. Unicode program.
Can any one let me know what is the exact problem ?..
Thanks
MAHA

Hi Maha,
pls see the declaration as below..it is working..
TYPES: BEGIN OF t_mara,
matnr type mara-matnr,
END OF t_mara.
DATA : it_mara TYPE t_mara OCCURS 0 WITH HEADER LINE.
DATA :wa_mara like line of it_mara.
Keerthi.

How to run the w120p.rex program in Solaris

Hi,
I'm new to Solaris, i want to run one .rex program from solaris. My program w120p.rex which is working fine in windows. I want to run the same from the Solaris. I dont know how to do in Solaris. Can any one help me in this?
Thanks in advance....

This forum is about Sun Studio C compiler and C programming in general. I suggest you ask on one of OpenSolaris forums - http://www.opensolaris.org/jive/index.jspa?categoryID=1
If I get it right and you are looking for Rexx interpreter, you'll need to download and install it first. Here are first two links I found myself:
http://nixbit.com/cat/programming/interpreters/regina-rexx-interpreter/
http://users.comlab.ox.ac.uk/ian.collier/Rexx/rexximc.html
If you are new to Unix in general, there are several subjects you need to cover before you proceed; one of places to start is again a Solaris forum - http://forums.sun.com/forum.jspa?forumID=863

Unicode programming on Solaris.

Similar Messages

Maybe you are looking for