Unicode - Read dataset dump
*{Comm Unicode Conversion
OPEN DATASET DDDEIN FOR INPUT IN TEXT MODE.
*}Comm Unicode Conversion
*{Ins Unicode Conversion
OPEN DATASET DDDEIN FOR INPUT IN TEXT MODE
ENCODING DEFAULT.
*}Ins Unicode Conversion
READ DATASET DDDEIN INTO DEIN.
here i am geeting dump. this is due ot DEIN is a structure, contains quanity and currency fields. these are not converted.
So, How can i solve this issues.
Note: if dont understand plese leave youe quiries here, i will give reply immediately.
Thanks
Sudhakar
Edited by: sudhakara reddy on Feb 7, 2008 2:34 PM
Hi,
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3d42358411d1829f0000e829fbfe/content.htm
Regards
Shiva
Similar Messages
-
How to write read dataset statement in unicode
Hi All,
I am writing the program using open dataset concept .
i am using follwing code.
PERFORM FILE_OPEN_INPUT USING P_P_IFIL.
READ DATASET P_P_IFIL INTO V_WA.
IF SY-SUBRC <> 0.
V_ABORT = C_X.
WRITE: / TEXT-108.
PERFORM CLOSE_FILE USING P_P_IFIL.
ELSE.
V_HEADER_CT = V_HEADER_CT + 1.
ENDIF.
Read dataset will work for normal code.
when it comes to unicode it is going to dump.
Please can u tell the solution how to write read dataset in unicode.
Very urget.
Regards
VenuHi Venu,
This example deals with the opening and closing of files.
Before Unicode conversion
data:
begin of STRUC,
F1 type c,
F2 type p,
end of STRUC,
DSN(30) type c value 'TEMPFILE'.
STRUC-F1 = 'X'.
STRUC-F2 = 42.
Write data to file
open dataset DSN in text mode. ß Unicode error
transfer STRUC to DSN.
close dataset DSN.
Read data from file
clear STRUC.
open dataset DSN in text mode. ß Unicode error
read dataset DSN into STRUC.
close dataset DSN.
write: / STRUC-F1, STRUC-F2.
This example program cannot be executed in Unicode for two reasons. Firstly, in Unicode programs, the file format must be specified more precisely for OPEN DATASET and, secondly, only purely character-type structures can still be written to text files.
Depending on whether the old file format still has to be read or whether it is possible to store the data in a new format, there are various possible conversion variants, two of which are introduced here.
After Unicode conversion
Case 1: New textual storage in UTF-8 format
data:
begin of STRUC2,
F1 type c,
F2(20) type c,
end of STRUC2.
Put data into text format
move-corresponding STRUC to STRUC2.
Write data to file
open dataset DSN in text mode for output encoding utf-8.
transfer STRUC2 to DSN.
close dataset DSN.
Read data from file
clear STRUC.
open dataset DSN in text mode for input encoding utf-8.
read dataset DSN into STRUC2.
close dataset DSN.
move-corresponding STRUC2 to STRUC.
write: / STRUC-F1, STRUC-F2.
The textual storage in UTF-8 format ensures that the created files are platform-independent.
After Unicode conversion
Case 2: Old non-Unicode format must be retained
Write data to file
open dataset DSN in legacy text mode for output.
transfer STRUC to DSN.
close dataset DSN.
read from file
clear STRUC.
open dataset DSN in legacy text mode for input.
read dataset DSN into STRUC.
close dataset DSN.
write: / STRUC-F1, STRUC-F2.
Using the LEGACY TEXT MODE ensures that the data is stored and read in the old non-Unicode format. In this mode, it is also possible to read or write non-character-type structures. However, be aware that data loss and conversion errors can occur in Unicode systems if there are characters in the structure that cannot be represented in the non-Unicode codepage.
Reward pts if found usefull :)
Regards
Sathish -
Problem reading DATASET into xstring
Hi,
I am facing a curious problem where I'd appreciate a helping hand: when I read data from a dataset into a variable of fixed-length, everything works fine. When I try to do the same with a variable-length type, nothing is read.
This code works fine:
<i>DATA binarydata(32000) TYPE x,
alen TYPE i.
OPEN DATASET filename FOR INPUT IN BINARY MODE.
READ DATASET filename INTO binarydata ACTUAL LENGTH alen.</i>
Here alen contains the correct number of bytes read (eg. 19000).
But if I try:
<i>DATA binarydata TYPE xstring,
alen TYPE i.
OPEN DATASET filename FOR INPUT IN BINARY MODE.
READ DATASET filename INTO binarydata ACTUAL LENGTH alen.
</i>
Here alen is 0.
Can anybody tell me what's wrong here ?
Thanks & Regards
HeikoHello Heiko
If you are using NON-UNICODE system, please try by unselecting the checkbox "Unicode Checks Active" in program attributes.
While using UNICODE system, need to use as STRING.
Reason:
In UNICODE enabled or when Unicode Checks is active, system can transfer data between structures only when both are of characater format.
In your case, the data is read in text mode i.e character format but trying to move to XSRTING which is sequence of 'X' type characters. Hence resulting in dump.
Just for your info:
<b>The elementary data type STRING is similar to data type C and refers to a variable-length string. Accordingly, the elementary data type XSTRING is similar to data type X and refers to a variable-length byte sequence.</b>
Hope the above info clarifies you.
Kind Regards
Eswar -
Not able to get file from application server with read dataset
Hi,
Firstly i download a file from application server from read data set and then i sent this file as attachment. But problem is that i am able to send .jpg .bmp file but i am not able to send .pdf or .doc file so what can i do for that. ?
My code is like below...
DATA : PATH TYPE STRING.
DATA: E_FILE LIKE RLGRAP-FILENAME.
CONCATENATE '/tmp/' NAME_WITH_EXT INTO E_FILE SEPARATED BY SPACE.
CONDENSE E_FILE NO-GAPS.
IF EXTENSION = 'TXT'.
OPEN DATASET E_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT WITH WINDOWS LINEFEED . " MESSAGE MSG.
IF SY-SUBRC <> 0.
WRITE: SY-SUBRC, MSG, ' LIKE ', C_FNAME.
ELSE.
WHILE SY-SUBRC = 0.
READ DATASET E_FILE INTO WA_C.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND WA_C TO IT_C.
ENDWHILE.
CLOSE DATASET E_FILE.
ENDIF.
ELSE.
OPEN DATASET E_FILE FOR INPUT IN BINARY MODE. " ENCODING DEFAULT. " INPUT IN BINARY MODE . " TEXT MODE ENCODING NON-UNICODE.
IF SY-SUBRC = 0.
DO .
READ DATASET E_FILE INTO GS_PDF_TAB.
IF SY-SUBRC = 0.
APPEND GS_PDF_TAB TO GT_PDF_TAB.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET E_FILE.
ENDIF.
ENDIF.
Regards,
Gurprit Bhatiadelete this line DEFAULT WITH WINDOWS LINEFEED and check this..
-
Error on line read dataset p_zfile into it_int
hi while executing this below code..
open dataset p_zfile for input in text mode ENCODING DEFAULT.
if sy-subrc = 0.
v_one = 1.
do.
v_no = v_no + 1.
*read dataset pzfile into it_record*_ this is giving short dump as below
code to read file
end do
short dump
the following error is being prompted
CONVT_CODEPAGE
CX_SY_CONVERSION_CODEPAGE
A character set conversion is not possible.
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
where
it_record is type infile_struct,
and infile_struct is as below
types: begin of infile_struct,
data(1150) type c,
end of infile_struct.
and p_zfile is used in fm call file_get_nam
please suggest this code is working fine in 4.6 c not upgraded to SAP ECC 6.0 this error is occuring in the code
regarda
arorahere is code
open dataset p_infile for input in text mode ENCODING DEFAULT.
f sy-subrc = 0.
v_one = 1.
do.
v_no = v_no + 1.
read dataset p_infile into in_record. if sy-subrc = 0. here dump is occuring at last record i deleted the last record in the file but again the dump comes on last record only when all records are read and finally when the cursor come to read dataset statement last time
if v_no <> v_one.
split in_record at v_tab into wa_record-idno
wa_record-stonumber
wa_record-stolineno
wa_record-sched_line
wa_record-pur_group
wa_record-frmplant
wa_record-frmstglocatin
wa_record-toplant
wa_record-tostglocation
wa_record-material
wa_record-matdesc
wa_record-quantity
wa_record-dockdate
wa_record-splinst1
wa_record-splinst2
wa_record-splinst3
wa_record-splinst4
wa_record-delete
wa_record-block. -
Explain why READ DATASET conversion from codepage '4110' to codepage '4102'
I am unfamiliar with unicode but I am trying to solve a problem in an ABAP program.
Our code is
OPEN DATA p_in FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET p_in INTO i_tab.
The program gives me the error 'At the conversion of a text from codepage '4110' to codepage '4102'. The program abends on a line in the file that contains the special character '#'.
Does this mean that the file I am reading is in codepage '4110' and the internal format of i_tab is codepage '4102'? If so, how do the codepages get assigned to unix files and internal structures How can I make the both codepage '4110' or codepage '4102'? Also, what is the difference between these two codepages?
thanks.
Ryan
MyHi,
Use
open dataset DSN in text mode for input encoding utf-8.
a® -
hi guys,
I am getting OPEN DATASET SHORTDUMP using below code.
can somebody suggest me alteration of code..
Dump says error in READ statement.
DATA : BEGIN OF IT_EDIT OCCURS 0,
CNO(5) TYPE C,
DATE(8) TYPE C,
VENDOR(10) TYPE C,
MATERIAL(18) TYPE C,
STARTDT(8) TYPE C,
ENDDT(8) TYPE C,
QUANTITY(13) TYPE N,
END OF IT_EDIT.
OPEN DATASET P_INFILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
IF NOT SY-SUBRC IS INITIAL.
EXIT.
ELSE.
<b> READ DATASET P_OUFILE INTO IT_EDIT.</b>
APPEND IT_EDIT.
ENDIF.
ENDDO.
CLOSE DATASET P_OUFILE.
Regards
Chandra.hi,
pls chk this sample code.
report zfiles_0001.
Parameters: d1 type localfile default '/usr/sap/TST/SYS/Data1.txt',
d2 type localfile default '/usr/sap/TST/SYS/Data2.txt'.
data: itab type table of string.
data: wa type string.
start-of-selection.
Read file
open dataset d1 for input in text mode.
if sy-subrc = 0.
do.
read dataset d1 into wa.
if sy-subrc <> 0.
exit.
endif.
append wa to itab.
enddo.
endif.
close dataset d1.
Copy to new file
open dataset d2 for output in text mode.
loop at itab into wa.
transfer wa to d2.
endloop.
close dataset d2.
Delete the first
delete dataset d1.
regards
anver
if hlpful pls mark points -
Problem with READ DATASET when reading file from app server
Hi,
wondering if anyone can help, I'm using the following code to read from a file on app server, the file is of type .rtf
OPEN DATASET file_rtf FOR INPUT IN TEXT MODE
ENCODING DEFAULT
WITH SMART LINEFEED.
DO.
READ DATASET file_rtf INTO string.
IF SY-SUBRC = 0.
EXIT.
ENDIF.
ENDDO.
the open dataset part works sy-subrc = 0, but the read returns sy-subrc = 8 and no data is passed to string.
Any ideas as to what is causing this problem appreciated, <removed>
Thanks
Edited by: Thomas Zloch on Mar 17, 2010 3:57 PM - please don't offer p...Hi Adam,
The source code in the below link has details about how to read/write to application server.
[Application server file operartions|http://www.divulgesap.com/blog.php?p=NDk=]
Please let us know if you have any issues.
Regards,
Ravi -
Upload xml file from aplication server using read dataset, parser error.
Hi,
I would like to upload xml file from app. server but parser failed. If I upload this xml file from workstation (using ws_upload) it is correct. For uploading xml file from app. server I use open dataset... read dataset. In loop section I remove '#' char. How do You upload xml file from app server? What Could be incorrect.
I try to open dataset in binary mode, text mode...
TYPES: BEGIN OF xml_line,
data(255) TYPE c,
END OF xml_line.
DATA: gt_xml_table TYPE TABLE OF xml_line,
gs_xml_structure TYPE xml_line,
gv_xml_table_size TYPE i.
OPEN DATASET s FOR INPUT IN BINARY MODE.
IF sy-subrc <> 0.
MESSAGE e001(zet) WITH '....'.
ENDIF.
DO.
READ DATASET s INTO gs_xml_structure.
IF sy-subrc <> 0.
EXIT.
ELSE.
len = STRLEN( gs_xml_structure ).
len = len - 1.
check len > 0.
WRITE gs_xml_structure(len) TO gs_xml_structure.
APPEND gs_xml_structure TO gt_xml_table.
ENDIF.
ENDDO.You Can do this too
parameters: p_file like rlgrap-filename.
data: subrc like sy-subrc.
create object me.
REFRESH t_data.
* Open XML File
CALL METHOD me->CREATE_WITH_FILE
EXPORTING
filename = p_file
RECEIVING
retcode = subrc.
* Saves Data in an itab from XML File.
CALL METHOD me->get_data
IMPORTING
retcode = subrc
CHANGING
dataobject = t_data[].
Regards,
Claudio. -
# problem while reading dataset from application server.
hi all,
I uplodaed a text file which is tab delimeted, to the application server using transaction code cg3z directly. now that file is stored with # in place of tab(space) in application server.
my broblem is that when i am reading that file using READ DATASET its comming with that # symbol also.
how i split that dataset .
or if there is any other solution ,like openning file into another mode,
help me.
thank uouHi Pawan..
you can access the Tab character using CL_CHAR_ABAP_UTILITIES=>HORIZONTAL_TAB
Do like this After READ DATASET.
DATA : V_RECORD(100).
DO.
READ DATASET P_FILE INTO V_RECORD.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
SPLIT V_RECORD INTO FIELD1 FIELD2 SEPARATED BY <b>CL_CHAR_ABAP_UTILITIES=>HORIZONTAL_TAB.</b>
<<<<further operations here>>>>
ENDDO.
reward if Helpful.
<b></b> -
Reading File from Application Server using Read Dataset
Hi,
i am trying to read excel file from Application Server and has multiple records in that based on structure below. but when i execute its giving me error message.here is the code, can sumone suggest me on this please ??
FORM f_data_upload .
DATA:
l_filename TYPE string, "file name
l_wa_string TYPE string. "file record
l_filename = p_inp_as. "File path from Application Server
OPEN DATASET l_filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Read the data from the file in Application server.
READ DATASET l_filename INTO l_wa_string.
IF sy-subrc = 0.
SPLIT l_wa_string AT cl_abap_char_utilities=>horizontal_tab
INTO w_data-tcode
w_data-matnr
w_data-mtart
w_data-werks
w_data-vkorg
w_data-vtweg
w_data-lgort
w_data-meins
w_data-maktx
w_data-spart
w_data-kosch
w_data-mstae
w_data-brgew
w_data-ntgew
w_data-groes
w_data-matkl
w_data-prdha
w_data-mstde
w_data-mtpos_mara
w_data-gewei
w_data-spart
w_data-mstav
w_data-mstdv
w_data-dwerk
w_data-taxkm
w_data-versg
w_data-kondm
w_data-ktgrm
w_data-mtpos
w_data-mtvfp
w_data-tragr
w_data-ladgr
w_data-herkl
w_data-ekgrp
w_data-webaz
w_data-dismm
w_data-beskz
w_data-prctr
w_data-bklas
w_data-bwtty
w_data-vprsv
w_data-verpr
IN CHARACTER MODE.
APPEND w_data TO i_data.
CLEAR w_data.
ENDIF.
ENDDO.
CLOSE DATASET l_filename.
Error Message while executing
What happened?
At the conversion of a text from codepage '4110' to codepage '4102':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'ZHDI_LOMM_VEHI_MAT_MASS_CREATE' had to be terminated
as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 449. If this number is 0, the second error case, as
mentioned above, has occurred.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
caught in
procedure "F_DATA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4102' is not known to the system.
If the conversion error occurred at read or write of screen, the file
name was '/usr/sap/interfaces/conversion/pioneer/ddm/data/test_data1.xls'.
(further information about the file: "X 549
24064rw-rw----200812232135082008122307293120081223072931")
Please help me
Thank YouWoah ... perfect guru
but data looks like all junk characters ? its filling with special characters, hashes # and other characters but not with Excel data.. any idea ??
Temesh
Edited by: New2Sap Abap on Dec 24, 2008 6:42 AM -
Hi Friends,
I'm getting problem in reading only 100 records from the application server using the READ DATASET statement. The file on the application server may have 8000 records but i wanted to get only 100 records and process them. Then i wanted to get next 100 records from the file stored on app.server and process and so on.
After I get the 100 records, I wanted to do further operations such as putting them into a custom table.
Will the below code work?
DATA l_item(100) type c.
*Open the .DAT file for reading
OPEN DATASET p_file1 FOR INPUT IN TEXT MODE ENCODING UTF-8 MESSAGE
x_error.
IF sy-subrc NE 0.
*An error occured during opening the dataset !
MESSAGE x_error TYPE 'E'.
CLEAR x_error.
ENDIF.
DO.
*Read the .DAT file into an internal table
READ DATASET p_file1 INTO l_item.
IF sy-subrc EQ 0.
*split the records into data fields based on delimiter ','
*then append the current record to an internal table
SPLIT l_item AT ',' INTO
x_item-inv_item_id
x_item-intl_aa_nbr
x_item-intl_pba_nbr
x_item-intl_ta_nbr
x_item-intl_product_code
x_item-descr254
x_item-intl_stck_id
x_item-awr_disallowed_flg
x_item-returnable_flg
x_item-fulfillment_flg
x_item-refund_only_flg
x_item-prod_returnable_flg
x_item-stock_cat_id.
APPEND x_item TO i_item.
CLEAR x_item.
ELSE.
*Data was read and the end of the file was reached
MESSAGE i006.
EXIT.
ENDIF.
ENDDO.Hi,
If you want to process every 100 records once, you can in ways.
1.
DO.
*Read the .DAT file into an internal table
READ DATASET p_file1 INTO l_item.
IF sy-subrc EQ 0.
*split the records into data fields based on delimiter ','
*then append the current record to an internal table
SPLIT l_item AT ',' INTO
x_item-inv_item_id
x_item-intl_aa_nbr
x_item-intl_pba_nbr
x_item-intl_ta_nbr
x_item-intl_product_code
x_item-descr254
x_item-intl_stck_id
x_item-awr_disallowed_flg
x_item-returnable_flg
x_item-fulfillment_flg
x_item-refund_only_flg
x_item-prod_returnable_flg
x_item-stock_cat_id.
APPEND x_item TO i_item.
CLEAR x_item.
lv_count = lv_count + 1.
if lv_count = 100.
perform process 100 records.
clear: lv_count, x_items.
refresh x_items.
endif.
ELSE.
*Data was read and the end of the file was reached
MESSAGE i006.
EXIT.
ENDIF.
ENDDO.
2. Download all records into an internal table once.
then loop internaltable.
data: lv_count type i,
lv_count1 type i,
lv_previous type i.
lv_count = lv_count + 1.
lv_count1 = lv_count1 + 1.
if lv_count1 < = 100.
copy 100 records into another internal table2.
else.
lv_previous = lv_count - lv_previous.
if lv_previous = 100.
process records.
clear: lv_count1, internal table2.
refresh internal table2
endif.
endif.
endloop.
regards,
Ganesh -
Read dataset - read data randomly
Dear All,
I am facing a strange problem while reading data through READ DATASET statement.
The data is getting read randomly from the file.
For example, if my text file contains 10,000 records, i am able to see around 800 in my internal table.
Also, with read dataset statement, sometimes first record gets read, second time fifth record and so on. There is no particular order.
Read dataset statement is skipping a lot of records while reading data from the file.
Has anyone face this problem earlier?
Any clue in this direction will be highly appreciated.
Many thanks.
Best Regards,
TarunHi,
how you are looking your input file, if it is in NOTEPAD check menu option 'Format----> Word wrap' is unchecked and then see the how many entries are there in the file.
Regards,
Sreeram. -
i have to read an excel sheet from the application server into an internal table that i hv created.can you help me to write select query &read dataset statement?
suppose the internal table name is T_a and it has fields f1 to f7 which are all present in the excel sheet.
<REMOVED BY MODERATOR>
Thanks in advance,
Anand.
Edited by: Alvaro Tejada Galindo on Feb 14, 2008 2:33 PMHi
select f1 f2 f3 f4 f5 f6 f7
from TABLE
into table T_a.
read table T_a with key f1 = <val1>.
<REMOVED BY MODERATOR>
Regards,
Mansi.
Edited by: Alvaro Tejada Galindo on Feb 14, 2008 2:33 PM -
Upload read dataset only one line
hi all
i have a problem, i want to upload a file from applikation server. When i want to read dataset into a xstring field,
it read only the first line not all why?
here is my code
type-pools dset.
data lf_filename type string value '/opt/interface/indtrans/d58_sst/integrale/output/PLU.plu'.
data lf_line type xstring.
data lf_str_line type string.
data lf_hex_code type swxmlcont.
data lt_attr type dset_attributes.
start-of-selection.
open dataset lf_filename for input in binary mode.
do.
read dataset lf_filename into lf_line.
if sy-subrc <> 0.
exit.
else.
* get dataset lf_filename attributes lt_attr.
append lf_line to lf_hex_code.
endif.
enddo.
close dataset lf_filename.
thx abap_begin....that to be functional, but when i read with the file with cl_gui_frontend_services=>gui_upload with file Typ "BIN"
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
FILENAME = l_filename
FILETYPE = 'BIN'
* HAS_FIELD_SEPARATOR = SPACE
* HEADER_LENGTH = 0
IMPORTING
FILELENGTH = l_size
* HEADER =
CHANGING
data_tab = lt_data
EXCEPTIONS
FILE_OPEN_ERROR = c_not_found
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
GUI_REFUSE_FILETRANSFER = 7
others = 99.
i becam a other result then, when i read with
open dataset lf_filename for input in binary mode.
why?
Now i have a idea, i read the file value in text mode and save this in an internal table.
Then make the loop over table, and convert the value in identical princple such as cl_gui_frontend_services=>gui_upload with the filetype "BIN".
I dont' know, how you do this?
thx abap_begin
Maybe you are looking for
-
Export To Flash in Encore CS4 on the Mac
It has been widely reported (and I have confirmed) that Encore CS3 will not Build to Flash on a Mac running Leopard 10.5.5 and Quicktime 7.5.5 (the latest versions of Mac OS X and Quicktime). I would be most appreciative if anyone who has received En
-
Images deleted but not by me :-(
All the images and movies from a recent myKeynote presentation have mysteriously disappeared from the file. When I open the file I get a the slides and text come up along with the talkers notes a notification box come up with a headline saying -."Y
-
Date/time original not set in EXIF
When importing TIF files without metadata in its header (e.g. from a scanner) using a metadata preset that does include the "date/time original" this date is ONLY set in the IPTC data block, not in the EXIF data block. This data item is supposed to b
-
Cleaning up Old systems or marking obsolete after upgrade
Hello there, We have 80+ systems in our landscape. We have SAP R3 4.7 Enterprise to ECC 6.0 installations. We have BW systems. We have PI systems.... We just went through an upgrade of our oldest system that was 4.6C. We had manually placed these
-
The download bar isn't making any progress!
I'm using Windows 8 and this is a new FF install. I'm using Firefox Setup Stub 23.0.1 (1).exe. Please help!