Unified Intelligence Center
Hi
I have enabled Unified Intelligence Center throught the IPCCX
I can login to this application throught the below link
https://IPCCX IP:8444/cuic/Main.htmx
However i tried to pull out the reports from the review Outbound Agent Detail Performance Report But nothing came up/No reports are showing on the page
I missed any configuration?
Pls advice
Regards
Chrysostomos
Can you help please?
Similar Messages
-
Unified Intelligence Center Reports Missing Column Headings
Good morning,
We recently upgraded to UCCX 10.5. I have been experimenting with Unified Intelligence Center to generate reports from the call center environment. The reports seem to generate fine, except that the columns for the report data have no headers, so you don't know what the data represents. Is there a trick to getting those headers to show?
Thanks,
JasonHi Jameson,
I've been working with TAC on this issue and we actually just tested that. I have Firefox 31.3.0 as my primary browser and that is what I was using when the headers don't display. I did try running the reports in IE 10 and they displayed the headers correctly. However, on the report generation page the "Relative Date Range" drop-down did not work. I then put IE10 in compatibility mode and everything seemed to work correctly. I'm waiting to hear back from TAC if there are any currently known minimum/maximum browser versions for reporting.
Thanks for your reply.
-Jason -
Unable to save a report in Unified Intelligence Center
Hello,
When I generate any report it displays fine but when I tried saving it using IE9.0 64 or 256 bit it tries to save the report but the status stays as "Saving New Report Agent detail report" until I close the browser. I'm able to save the report using the Firefox browser. Please let me know if there are any browser settings I need to modify.Hi,
As per the BOM, below are the qualified browsers
Qualified Browsers
• Microsoft Internet Explorer version 7.0
• Microsoft Internet Explorer version 8.0
• Mozilla Firefox version 3.x
Not sure, you can try adjusting some compatability settings in IE9.
Regards,
Senthil -
With Anirudh Ramachandran and Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the latest advancements in Cisco UCCX (such as the integration of Cisco Social Miner to provide agent chat and better reporting using the Cisco Unified Intelligence Center), as well as the existing features of Historical Reporting, custom reporting using the historical database, Agent Email services, JTAPI integration with CUCM, and the HA over WAN cluster mechanism.
Anirudh Ramachandran is a customer support engineer at the Cisco Backbone Technical Assistance Center in Bangalore, India. Working in the Asia-Pacific time zone for the last two years, he focuses on Cisco Unified Contact Center Express issues and specializes in Linux, JTAPI/CTI integration, and UCCX system and database issues. He holds the CCNP Voice and UCCX Specialist certifications, and is also a Red Hat Certified Engineer. Anirudh writes tools and automates bug workarounds for UCCX in addition to working on TAC service requests, and currently has authored and co-authored seven such tools. Anirudh graduated from the National Institute of Technology Karnataka with a Bachelor of Technology in Computer Engineering.
Abhiram Kramadhati is an engineer with the Contact Center Backbone team in the Asia Pacific timezone. He has been working with UCCX since he started with Cisco 2 years ago. During his time at Cisco, he has built his expertise around UCCX Telephony applications, JTAPI integration, UCCX system behaviour, LDAP components and also UCCX as IPIVR in UCCE environments. He also works on other technologies including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the region. Abhiram is a Telecommunications engineer from Bangalore, India.
Remember to use the rating system to let Anirudh and Abhiram know if you have received an adequate response.
They might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video Contact Center subcommunity discussion forum shortly after the event. This event lasts through May 3, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.Hi Anthony,
Thanks for the question.
This is an interesting requirement, since the UCCX trigger's configuration is translated only to the Call Forward Busy External setting on the CUCM.
Trigger creation:
144768: Apr 22 21:54:23.789 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet.updateNewTrigger() - Creating a new Trigger :1234
144876: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet routePoint = 1234
144877: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet description = testt
144878: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet deviceName = testt
144879: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet devicePool = {1B1B9EB6-7803-11D3-BDF0-00108302EAD1}
144880: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet devicePoolName = Default
144881: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet callingSearchSpace =
144882: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet callingSearchSpaceName = None
144883: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet redirectCSS = default
144884: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet location = {29C5C1C4-8871-4D1E-8394-0B9181E8C54D}
144885: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet locationName = Hub_None
144886: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet partition =
144887: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet partitionName = None
144888: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet voiceMailProfile =
144889: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet voiceMailProfileName = None
144890: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyVM =
144891: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyDestination =
144892: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyCSS =
144893: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyCSSName = None
144953: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: try makeRequest() on AXL: 10.106.113.142, AXLUser: axl, AXLPassword: XXXXXX
144954: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:CCMVersionSOAPAdmin.getAXLVersion():7.1
144955: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: makeRequest() - Start REQUEST ====================
144956: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:POST /axl/ HTTP/1.1
Connection: keep-alive
Host: 10.106.113.142:8443
Authorization: Basic YXhsOmF4bA==
SOAPAction: "CUCM:DB ver=7.1"
Accept: text/*
Content-type: text/xml; charset="utf-8"
Cache-Control: no-cache
Pragma: no-cache
Content-length: 440
http://schemas.xmlsoap.org/soap/envelope/">MADM_5691234CRS Line descriptionCallPark
144957: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: makeRequest() - End REQUEST ==================
144958: Apr 22 21:54:23.914 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: getSocket: MADM_LIB_AXL_AXL_SOCKET_POOL-0-79[TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=10.106.113.142,port=8443,localport=44913]]
144987: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-570.CCMCTIRoutePointSOAPAdmin: makeRequest() - Start REQUEST ====================
144988: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:POST /axl/ HTTP/1.1
Connection: keep-alive
Host: 10.106.113.142:8443
Authorization: Basic YXhsOmF4bA==
SOAPAction: "CUCM:DB ver=7.1"
Accept: text/*
Content-type: text/xml; charset="utf-8"
Cache-Control: no-cache
Pragma: no-cache
Content-length: 839
http://schemas.xmlsoap.org/soap/envelope/">MADM_570testttesttCTI Route PointCTI Route PointCTI Route PointSCCPUserRing1000010000
144989: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-570.CCMCTIRoutePointSOAPAdmin: makeRequest() - End REQUEST ==================
145014: Apr 22 21:54:24.647 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerUtil.createRPAndLineOnCCM() - CTI RP created.
145015: Apr 22 21:54:24.647 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerUtil.createRPAndLineOnCCM() - Created a Route Point = 1234
As you would aready know, the UCCX will send an AXL request (within the SOAP envelope) to the CUCM to create this RP. Looking at the existing code, there does not seem to be a method where we are differentiating between CFB_internal and CFB_external while sending this request.
We have taken this as an enhancement request and also spoken to the business unit about the same. It has been added to the roadmap, we will reach out to you offline to understand the business case so that the process can be expedited if needed.
Keep the questions coming
Cheers,
Abhiram Kramadhati -
With Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the upgrade, migration methods, and new features of the latest released Version 10.0 of Cisco Unified Contact Center Express (UCCX) with Cisco expert Abhiram Kramadhati.
Abhiram will address the following on the latest release of Cisco UCCX Version 10.0:
Installation
Upgrade from previous versions - both Linux and Windows
Migration from MCS to Cisco UCS environment - Different methods and best practices
New features - Overview and limitations
This discussion will center on install and upgrade best practices, changes in hardware support, and migration methods from MCS to Cisco UCS. He can also briefly discuss the new features introduced in 10.0. The discussion focuses the latest versions, but queries about general Cisco UCCX topics can be addressed too if time allows.
Abhiram Kramadhati is an engineer with the Contact Center Backbone group. He has been working with Cisco UCCX since he joined Cisco. During two years at Cisco, he has built his expertise around Cisco UCCX telephony applications, Java Telephony API (JTAPI) integration, Cisco UCCX system behavior, LDAP components, and Cisco UCCX as IP interactive voice response in Unified Contact Center Enterprise (UCCE) environments. He also works on other technologies, including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the Asia Pacific region. Abhiram also holds a CCIE in voice (40065).
For more details about this topic, refer to the recently published Tech-Talk Video and Blog.
Remember to use the rating system to let Abhiram know if you have received an adequate response.
Abhiram might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in the Voice, Video, and Collaboration community, sub-community, Contact Center discussion forum shortly after the event. This event lasts through January 31, 2014. Visit this forum often to view responses to your questions and the questions of other community members.Hi Anurag,
Thanks for your questions.
1:Is there change in DB architecture as CUIC is the only option as compared to previous linux version UCCX ?
I assume this is from the tables regarding historical data. The database schema essentially remains the same since UCCX 9.0 had CUIC too and we had a seperate DB Space for CUIC and we still continue with that. The traditional historical tables remain and the replication process remains the same too.
2:Is there any version change for Linux OS used as VOS,
The Linux version is Red Hat Linux 5. To be precise:
[root@uccx10pub /]# cat etc/redhat-release
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
3:Is there any API architecture change in UCCX 10 from previous releases ?
I can answer this more of an overview. The only enhancement in the API side is the introduction of REST API step in the script editor. You can now make REST calls from the script and this ofcourse opens up a whole new world of possiblities.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
5:Is 3rd Party UCS hardware supported by UCCX 10 instead of using Cisco manufactured UCS , can i use HP hardware for Virtualisation ?
Yes, it can be used. This is something called as "Third party specs based specification". The most important things seen for compatibility are:
Inter CPU Model
It it is on thVMWare Hardware Compatibilty List
You can get more information about this on the "Can I use this server?" section of UC Virtualized Hardware page:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
6:Is Host name change supported?
Yes, the hostname change is supported. The prcocedure is documented in the UCCX 10.0 Administration Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_0/configuration/guide/UCCX_BK_W1AF9DDD_00_uccx-admin-guide-10.0.pdf (Pg 168)
Cheers,
Abhiram Kramadhati -
Business Intelligence Center and Dashboards
Does anyone know of good and easy to follow tutorials or instructions on how to setup a business intelligence center and create dashboards? Anything I need to do on the SQL side?
Running 2013 enterprise and 2012 SQL on 2008 R2 Server
ThanksWhat kind of data are you reporting on? There are several different types of BI products, such as SSRS, PerformancePoint, and PowerPivot. Each of these has its pros and cons. For example, if your data is not in a cube, then PerformancePoint
is not very useful. Here's an example blog from Microsoft, which explains a bit of this. As a consultant, a typical conversation about getting started with BI and dashboards usually lasts about 2 hours.
http://blogs.msdn.com/b/microsoft_business_intelligence1/archive/2012/07/23/microsoft-business-intelligence-in-excel-2013-sharepoint-2013-and-sql-server-2012-sp1.aspx
Laura Rogers
Rackspace: SharePoint Consulting
Blog: http://www.wonderlaura.com
Twitter: WonderLaura
Books:Beginning SharePoint 2010: Building Business Solutions with SharePoint
Using InfoPath 2010 with Microsoft SharePoint 2010 Step by Step -
CISCO UNIFIED CONTACT CENTER EXPRESS - SMS INTEGRATION
Is is possible to integrate Cisco Unified Solutions (Cisco Unified Contact Center Express) with a SMS system? Do you have any recommendation of solution (ej. Quescom)?
We do this all the time using XLM and SOAP...what exactly did you have in mind?
Peace,
Michael Clendening
CCIE 6487 (ISP-Dial) -
Hi guys,
I reserved the sandbox of Unified Contact Center Enterprise. But when I open the desktop application from the url "http://10.10.20.60/desktop/container". It always shows the error "Finesse is out of service.".
Does anyone meet the issue?
WilliamHi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Unified Contact Center Express installation error
HELLO
while installing the Unified Contact Center Express 9 on vmware ESXI5.1 i am getting the attached error
the VM config
2 cpu
4 gb ram
160 gb hdd
os rhcl5 32bit
Please helphttp://software.cisco.com/download/release.html?mdfid=284666782&softwareid=283733053&release=2.3&relind=AVAILABLE&rellifecycle=&reltype=latest
Chris -
Placing webparts horizontally on business intelligence center
hello experts...
i want to share a problem, although it is not new but i am not been able to resolve my issue...
i want to place web parts (Performance Point Reports)horizontally on the site on "Business Intelligence Center"...i have seen couple of articles but no one is focussed on "BI"...
if anyone can share the remedy...Performance point reports are webparts it will be placed based on the webpart zone orientation you need to create new page layout contains webpart zone and make the webparts aligned horizontally
check the below post
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0da82ef8-5a85-4d8b-99c0-8a259560d22c/how-to-arrange-webparts-horizontally-in-webpart-zone
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010 -
Business Intelligence Center - User Training
I am the Project Server Administrator, but I'm a project manager with a business degree [not a DBA/IT professional]. My predecessor implemented the project portion of Project Server 2010, and I have to implement the Business Intelligence Center. I
know I need training, but there are so many options - everything from online guides to days-long classes in other countries. The online guides aren't helpful to me. Since I'm so new to Project Server and BIC, I need a more hands-on training approach.
However, cost is a factor and traveling out-of-state (let alone out-of-country) is cost-prohibitive. I'm in Michigan.
Any recommendations for BIC implementation training for a non-IT person?Julie
In your search, do not look for Microsoft Project or Project Server, rather look for Tech Training companies that specialize in SQL, SharePoint and Excel Services. Understand that the BI Center is pure SharePoint functionality. I give you a high level overview
of this in my Implementing and Administering book. The BI center uses Office Data Connection (ODC) files, which are Excel Workbook files that contain a connection string and either a SQL query, or an oData query (2013 and later). You connect to these using
Excel to retrieve the datasets. Microsoft provides a number of these out of the box to connect to the reporting database and the OLAP cubes.
If you've got the Excel skills, the you should be good to go. The next hurdle is understanding the dataset. For that you should download and install the Project 2010 SDK, which contains the data dictionary for the reporting store, should you need to change
an existing SQL query or create your own. Start by looking at the sample reports, which should give you some insight on how to handle project data.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG -
CISCO UNIFIED CONTACT CENTER EXPRESS - ORACLE WEB SERVICES
We need to access to an Oracle database information through Web Services, in a system witch Cisco Unified Contact Center Express 8.5.
Is there any way to do this? Thank you!Hi Alicia,
Incase you are planning to obtain real time stats from the CRA_DB which is the UCCX db, this can be done via the use of a wallboard.
-This displays the data such as
available agents in CSQs, call volumes, talk times, wait times, and number of handled calls. You can enable the Unified CCX system to write Unified CCX real-time information to a database that can then be displayed on a wallboard.
-Not sure if this is what you are looking for, let me know, thanks
Prashanth -
CISCO UNIFIED CONTACT CENTER EXPRESS - ANSWERING TEMPLATES
It is possible in Cisco Unified Contact Center Express 8.5, Premium, to configure some templates for mail / SMS / chat answers, so all agents can serve customers in a predefined style?
If you are referring CAD Agent EMails you can check the section "configuring Templates" in the link below
========
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cda85ccxug-cm.pdf
========
Regarding chat - Agents can communicate only with team members , supervisors and SME (if presence is enabled). The closest what you can have for the template is "
Predefined High-Priority Chat Message" which can be checked on page 57
=========
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cad85ccxug-cm.pdf
=====
Hope this helps
Regards
Anuj -
Cisco Unified Contact Center Express 8.5 feaures ( Standard License)
Can somebody give some info regarding what are the Highliting feaures that i can have with UCCX Sandard Licenses. ?
Can the Agents use CAD and for Superviosrs CSD ?What are the highligting features available with Sandard License ?
Recording and Silent Monitoring is Possible ?
Configured Licenses:
Package: Cisco Unified CCX Standard
Total IVR Port(s): 300
Cisco Unified CCX Standard Seat(s): 23
High Availability : Disabled
Cisco Unified CCX Maximum Agents: 400Dear mohamedbineesh,
Allow me to answer as best as I can.
UCCX Standard Edition is quite a limited package, you won't be able to use features like CAD or Silent Monitoring/Recording. You can use Supervisor Desktop, but again, the features are limited, for a full view of features that you can use with Standard Edition, please check the document below:
Cisco Unified Contact Center Express
Solution Reference Network Design
Cisco Unified Contact Center Express, Release 8.
Cisco Unified CCX Packaging
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/design/uccx851srnd.pdf
IPPA features
CSD supported Licensing platforms
I hope this helps. Any question please let me know.
Regards,
Daniel Amador
CCIE# 38898 (Voice) -
Cisco Unified Contact Center Express 8.5 and Call Manager 8.5 on single ESXi
Does Cisco support 2 virtual machines (on ESXi), one for Cisco Unified Contact Center Express 8.5 and one for Call Manager 8.5?
I have blade ucs b200.
Thanks a lot, SvetomirYes it is supported. Check this out http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines#Sizing_Examples
GP.
Pls rate helpful posts by clicking on stars below the post !!
Maybe you are looking for
-
The attempt to burn a disk failed. An unknown error occurred (4000).
Whenever I try to burn a CD from iTunes, the burning process starts and continues for about two minutes, cancels automatically and then displays the following statement: "The attempt to burn a disk failed. An unknown error occurred (4000)." Several A
-
Hi all, Is there any way I can view/organize the uploaded pictures into separate folder? Thank you. Jack
-
How can to debuging by ABAP mapping in XI
hello, I loock for answer, is it possible to debuging, in method IF_MAPPING~EXECUTE, Ilja
-
Talking to a real live person possible?
So I'm having trouble starting up my Time Machine, and nothing on here addresses my issue. Is there an actual way to talk to someone live at Apple without having to fork over more money? I cant seem to get the online thing to get me to talk to someon
-
Problems when the server is down
When the server is restarted after a task is assigned, this task saves its state (claimed). After that, when I try to mark that task as completed, the server says that the conversation id is not found. Is that a Bug? or how can I fix that problem? Th