Uniform gap between Caption and Fillable Area

Dear all,
I want to mentain Uniform gap between the caption and fillable area for all the fields.We can adjust the gap manually but it's difficult to mentain uniform for all the fields.Can we do it by Java script or by any other way so that it should exactly same for all the fields.If any body can please help me.
Thanks a lot in Advance
Regards
Rakesh

Dear Jimmy,
Thanks a lot for your quick response.But the size of the caption of the fields i.e. no of letters present in the caption are not same.Suppose one field is Name and another field is Adress.How can I set the the two fields such that the gap between the caption and fillable area for the two fields are same.If the gap will same then the form will look better.I can Adjust this manually but it will not same exactly.
Regards
Rakesh

Similar Messages

Xperia z3 D6603 concern over gaps between glass and frame.

Hello,
I recently upgraded my ion to z3. And there is no doubt that it's an amazing phone.
But I have some concerns regarding the small gaps between glass panel and metal frame. It gets dust and more over that I am worried about its waterproofing. I want to know is it normal for all z3 out there or is it just me? What if it can't handle water in this regard?
There are some pictures.
Solved!
Go to Solution.

This subject has been mentioned many times before, from the Z all the way thru the models up to the Z3.......you have to have some uniform gap between the panels & the bezel...this is to allow some form of expansion due to temp changes, if you think about it.......if it was packed tight & the phone heats up the expansion would have nowhere to go resulting in damage. The gaps do not mean that you have a waterproof issue either.....
Hope this helps

Urgent :Relation between vendor and business area

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi ,
Is there any table or transaction which will give an one-to-one relation between vendor and business area?
Thnks and Regards,
Anand

hi
in this situation u have to creat new Z table and Z transaction with link of this both . it will solve ur problem . better to take abaper help other wise u can use T-CODE se11 to creat table.
se93 for transaction code .

Relation between Responsibility and Business Area

Hi,
I have a requirement wherein i have to make a particular workbook available in specific responsibilities.
Now when i have to create a folder then how do i know in which Business Area should i create the folder.
Basically i need to know the relation between Responsibility and Business Area i.e which Business Area i should create the folder so that it is visible in desired responsibilities.
Is there any way possible i can know this.
Regards,
Shruti

Hi,
You can do that in two ways:
1. Go to the administrator and check the sharing BA for each responsibility you require.
2. Query the database to retrieve the sharing.
Do whatever you find easier.
For the database option you can run the following (change it to your own schema name):
select distinct
t.ba_name,
t.ba_id,
t.ba_description,
case when substr(t.ba_created_by,1,1)='#' then fu.user_name else t.ba_created_by end as CREATED_BY,
disco_users.eu_username,
case when instr(disco_users.eu_username,'#')=0 then disco_users.eu_username
when instr(disco_users.eu_username,'#')>0 and instr(disco_users.eu_username,'#',2)=0 then (select fu.user_name from fnd_user fu where fu.user_id=substr(disco_users.eu_username,2,5))
else (select resp.responsibility_name from fnd_responsibility_tl resp where resp.responsibility_id=substr(disco_users.eu_username,2,5))
end as "Shared Name / Responsibility"
from eul_us.eul5_bas t,
apps.fnd_user fu,
eul_us.eul5_access_privs disco_shares,
eul_us.eul5_eul_users disco_users
where substr(t.ba_created_by,2,10)=to_char(fu.user_id(+))
and t.ba_id=disco_shares.gba_ba_id
and disco_users.eu_username(+) NOT IN ('EUL5', 'PUBLIC')
AND disco_users.eu_id(+) = disco_shares.ap_eu_id
Hope it helps
Tamir

Relation between Company and Personnel Area

Hello friends,
Which table i can find the relation between companies and personnel areas ?
I found T001P, but this table has only the relations between personnel area and personeel subarea...
Thanks for your help.

Hi,
Personnel area - company code assignment : V_T500P
Company - company code assignment : V_001_Y
Regards,
Dilek

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

What is the difference between Structure and Work area

Hi Guys,
What is the difference between Structure and work area?
Are they same with different names?
Thanks,
mini.

hey buddies,*
i had this same doubt for a long time and i have my finds with me ie wa and structure are the same but wa can hold a single record but structure cannot hold data in it but according to the previous posts folks say structure too holds data as wa does but i guess when debugging wa holds data and structure doesnt hold bcoz i tried.
types : begin of str_mara,
             matnr type mara-matnr,
            ernam type mara-ernam,
            end of str_mara.
data it_mara type table of str_mara.
select matnr ernam from mara into it_mara where matnr = '100-101'.
*********************if folks say wa = structure,this should work,isn't it?*********************************
loop at it_mara into str_mara.
write:/ str_mara-matnr , str_mara-ernam.
endloop.
*******************but it throws an error saying that str_mara is not a wa*******************************
i may not be correct too plz let me know if i'm wrong
Edited by: arun_aime on Feb 12, 2010 4:41 PM

How to maintain gap between table and graph in a report

HI,
I have a report in which a graph is placed below a table and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added but then i want maintain same gap between the table and graph???

>Right click on chart.
>Open the property and go to the relative position.
>Select the distance of the upper left point of the chart in relation to another report element by entering - the number of pixels; the part of the tavfrom which youble want to measure the pixels (in the first drop-down list); the report element from which you want to measure the pixels (in the second drop-down list).
>Repeat this for the distance of the lower left point of the chart.
Hope this will help you out.

Gap between masthead and toolarea

Hi All,
I am facing a problem of white space( a gap) between the masthead and toolarea when i open the anonymous page which has been customised but when the same page is opened in the preview it appears to be perfect.
i have checked the jsp files of masthead and toolarea but it does not have any Margin attribute such as: topmargin="0" rightmargin="0" leftmargin="0" marginwidth="0" marginheight="0".
can anyone help me on the same.
Thanks,
Gunjan

Hi,
Try to change the Theme of this Desktop, may be there is a mis-configuration in the Theme itself.
Check also this for similar problems with themes:
TLN overlaps with Masthead
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Gap between screen and bezel should i take it back to apple?

Theres a noticable between the screen and the metal bezel, its currently working fine but i dont want the screen to die or the inside to collect up dust over the years. I only recently purchased the red nano and want this to last for a long while. Is it worth it to bring back to the apple store to get this replaced or are all nanos like this with a gap between the screen and bezel (just towards the bottom of the screen only) thank

You are very welcome, and good luck getting this resolved. Things like damage and scratches have been brought up on here by users in the past with devices and Apple has been pretty good about dealing with the issues.

White gaps between regular and video slides

I have just created an adobe captivate video. There is a white gap between regular slides and animation slides. It usually lasts for about 2 seconds. Because of this my audio and video are no longer synced. This gradually gets worse as the presentation continues. Does anybody know how to get rid of these white gaps? I'm using version 3. The issue is demonstrated in the following video:
http://screencast.com/t/hqczdmV69b9
Thanks in advance.

It looks like they go all the way to the end of the slide. It is happening somewhere between slide 7 and slide 8 (see attached screen shots). Thanks again Rod.

Newbie Question: How to create a gap between header and wrapper?

Hi everyone,
My wife and I are trying to figure this one out. We have tried double clicking on the wrapper in the "All Rules" menu, adding a top margin to the wrapper in the "Box" submenu, as well as changing the positioning of the wrapper in the "Positioning" menu, but this made both the wrapper and header move down. How to I make the wrapper move down while leaving the header in place, so as to create a gap in between the two? Thansk so much!

As snake states, a link to the page would be best. Usually margin top is what you would set. So if your wrapper is below your header, you would set the margin top in the css for the wrapper to be what you want the gap to be.
Usually a wrapper or container is what is holding the whole site, but this doesn't sound the case here. So something like this in your css.
.wrapper {
margin-top: 25px;
You would probably add the margin-top:25px to the existing css for that page.
If you can provide a link to the page, the very helpful people would be able to solve this for you rather easily.
Jim

Gap between frame and lcd (X220)

I just received my x220 today, however I found there are gaps between the frame and the lcd.
1mm for the left side
2mm for the right side
Is it normal?
Link to picture
Link to picture
Link to picture
Link to picture
right
Link to picture
Link to picture
Link to picture
Link to picture
excellent built quality!
Link to picture
Link to picture
the left side is okay, since it's just 1mm, but the right side is really unacceptable (2mm), it is very annoying
Can I ask for an exchange?
Thanks
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

I never noticed it before, but yeah it has a larger gap on the right side than on the left...
But hey, I look at the screen not at the gap. I'm happy to have an anti-glare IPS screen.
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |

A gap between screen and right soft key with softw...

I have many problems.
First one is : When I press open button to open pool game on my Asha 201 then I have
to press Open Button many times to open games.I have tried factory
restore settings but I don't think factory restore setting caused this
problem. Your officer " 'Prashun Dey'
E-mail Specialist - Nokia Care Bangladesh " told me to update this phone using nokia suite. So far i know this nokia asha 210 doesn't support nokia suite.Why did he advise me this ???? I have bought this phone only five days ago and now I need a soft update. Not even a week passed and I need for a update of the software. Is it believable ?
Another problem is :
I have purchased my phone on 17 September.but
I am being irritated by a gap between right soft key and Screen of my
phone.This gap is larger than normal asha 210 model's phone. This gap
making my left soft key button hard and it irritates me a lot when I
type. How can I fix it ? Can I change or replace it from Nokia care ?
I want it to be replaced.I have never faced such product setting problem on samsung. I must say samsung's 5000 taka's phone is thousand time better than this phone Asha 210. I have only one day in my hand to repare it otherwise I will go to head office of nokia with this complain. You should know that we have earned money by working hard in job field and don;t want to waste 6000 taka buying a defected phone.I don't understand why nokia packages defected and physically immature phone to be sold in store. If we can't solve this problem then i gotta take steps.
I have uploaded an image which illustrating my actual problem with a drawn model of NOKIA ASHA 210. Hope that you will be kind enough providing me helps replacing or fixing this problem so that I never stop using NOKIA's phones.
Not even a week passed and facing too many problems with one default problem of nokia which done by nokia while attaching parts of the device before packing the device to be sold.
I have mailed my problem 2 days ago but nokia did not reply me yet!!! They are really nonsense !!!
Attachments:
nokia asha problem.JPG ‏54 KB

I have used my 5c for one week and I can notice a gap too. I is really small, but when I look close to it I see small dust in there. I baby my phone a lot and I am sure it was not there 7 days ago when I got it. I am also afraid this to get larger... It may be a dilatation because of the weather or something, because I did not drop my phone.
Can anybody help us?

How to decrease the gap between label and input field.. pls respnd

hi friends,
I am facing this problem since long time and couldnt get any solution...
pls respnd,
i need to decrease the gap between my input field and label.. its very much gap there..
thanks in very advacne,
niraja

Hi WD ABAP,
i am doing the same, created tcontainer, and just binded my node. i given matrix layout. But i dont know why it is coming like that.
Also WDABAP, could you pls reply me to the other thread,
about when im trying to read the dropdown value of subnode, the get_static_attribute or create_element method is going into my supplyfunction.
supplyfunction - my code is to fill the dropdown. and due to this supply function triggering,
my get_static_att or create_element is not reruting currenct row dropdown value.
what am i doing wrong.. can u pls pls.. its kicking me. i have spent my whole weekend on this, but couldnt solve this.
plsfnds :(((((
Niraja

Uniform gap between Caption and Fillable Area

Similar Messages

Maybe you are looking for