Unify for Cisco UCCX

Has anyone worked with Unify for Cisco UCCX? if yes, please provide pro and con on the product. I am checking on outbound campaign dialer options and see what would best fit client's requirements. I have tested outbound on UCCX, but it does not have all the requirements on client's wish list.
Thanks.
Dat Pham

Hi Marco-
Take a look at the UCCX 9.0.2 Administration Guide under the ASR and TTS in Unified CCX section:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/configuration/UCCX_Admin_guide_902.pdf
UCCX Configuration Guides:
http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-express/products-installation-and-configuration-guides-list.html
DJ

Similar Messages

  • N80 for Cisco Unified CallManager

    We know that Nokia has a client software for Cisco Unified CallManager which gives Cisco IP Communications functionality (VoIP functionality under Cisco infrastructures) to Nokia E60, Nokia E61 and Nokia E70s.
    The question is will there be a similiar application which will give the same functionality for Nseries devices (especially N80s and future coming N95s)?

    i do hope there is, but Nokia's series like E & N have a diffrent target of customers & features!Message Edited by android on 14-May-200704:12 PM
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • Redundancy for Cisco Unified Communications Manager Business Edition 8.0.

    Hi,
    Is there redundancy for Cisco Unified Communications Manager Business Edition 8.0.
    Can I deploy more than one server at a site for redundancy?
    Thanks
    Mudassir

    No. UCM-BE is a single-server solution. You can use CME in SRST mode for survivability if the server is offline.

  • Integrate Cisco UCCX with remote CUCM

    Hi
    We are looking into design of a Cisco Contact Center Express 8.0 solution with CUCM 8.0. In this deployment model, we want to integrate Single Server UCCX at Site A with CUCM Cluster at Site B, that is, there is no Local CUCM.
    I have been reading through the Latest UCCX SRND, and as per one of the Cisco Unified CCX General Rules for Design states, The Cisco Unified CM servers running CTI Managers with which Cisco Unified CCX communicates can be located in the same campus LAN or different site as Cisco Unified  CCX servers.
    This statement is highly confusing. Does this statement mean that, CUCM running CTI Manager Service can be in same LAN network as UCCX OR it can be at a Different Site, and UCCX and CUCM can communicate over WAN?
    Please suggest.

    I got through some of the Cisco UCCX 8.0 release notes, the required design is indeed supported model.
    The release notes state that Unified CCX Remote from Call Agent, which supports Cisco CUCM as remote call agent and JTAPI Over WAN Support.

  • What Service Restarts the Data Calculations for Cisco Supervisor Desktop and Wallboards

    Hello All,
    UCCX version 8.0.2.11005-20
    UCCX is running in HA mode.
    Yesterday we believe our UCCX Servers failed over due to a network outage between the Publisher and the Subscriber.
    So last night I restarted the "CCX Engine" to fail-back the servers, which worked just fine.
    Now today the database that our Wallboard uses is not showing any data. So I ran some SQL statements on both Servers' CLI and the Database db_cra is showing old data on the Subscriber and the Publisher is showing all Zeros. But after just looking at the Real-Time Reporting page on the Web GUI, that "seems" to be working but I'm not positive because I have nothing to compare the numbers to...
    When I try to run Supervisor Desktop, I can open the Program, sign-in, and then when I choose the "team" and then try clicking on a CSQ Name, Supervisor freezes and I get a "Not Responding" message. I thought it was just my PC but this is happening for 2 other people as well, on 2 completely different PCs so I can rule out that its the computer that is killing Supervisor.
    Is there another service that needs to be restarted in order to get this working? I tried restarting the service for "Cisco Desktop Recording and Statistics Service" and I was nervous about restarting anything else because we are currently open and our CallCenter is taking calls.
    Any thoughts would be much appreciated!
    Thanks in Advance,
    Matt

    Has your problem cleared up?  Did you do anything, such as a reboot or open a TAC case?
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Mark call as callback in Cisco UCCX outbound

    Hi,
    I am using Cisco UCCX 10.0. I configured outbound system in uccx and calls are offering to agents.
    Anybody please help how a call can be marked as callback in uccx.
    Also whether i can update the result of the call; for example: I am running a campaign for credit card. Whether i can update any where that what each customer responded.
    Please help

    Anybody please help how a call can be marked as callback in uccx.
    The agent has a Callback button in CAD while the call is connected to setup the callback. The callback window defined on the campaign will decide how much slack on either side of the desired callback time system will offer that preview call to an agent. Also, the missed call behavior defines what happens if the subsystem cannot find an agent within the window.
    Also whether i can update the result of the call
    The call result is set to Voice (i.e. customer responded) by default unless an agent Reclassifies the call. Again, this is a button in CAD. The Admin Guide defines what will happen for all of the other result states.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Cisco UCCX 9.x Web Chat integration with Siebel

    Hi,
    I have a requirement to configure and integrate Cisco UCCX 9.x Web chat with Siebel. Do anyone have any good documentation/guides on configuring Web chat on UCCX aswell as integrating it with Siebel?
    Thanks
    KMS

    Hi,
    We have uccx 9.0 with socialminer integrated for webchat.
    After the chat is complete,can we send the chat history to the customers email id.
    Is this possible?If so can any one advice me how to configure the same.
    Thanks,
    Rahul

  • Study Material for Cisco Lifecycle Services for Advanced (#650-251)

    Does anyone know of a ciscopress or other text to study for Cisco Lifecycle Services for Advanced Unified Communications (#650-251)

    The 650-251 LCSAUC Cisco Lifecycle Services for Advanced Unified Communications exam is the exam associated with the Advanced Unified Communications Specialization. The Cisco Lifecycle Services for Advanced Unified Communications (LCSAUC) exam assesses the candidate's knowledge and skills needed to support implementing an advanced Unified Communications solution on a network throughout each phase of the lifecycle. The exam assesses Cisco's methodology to guide customers in performing all of the necessary steps to ensure a successful implementation of Unified Communications solutions.

  • Cisco UCCX 8 - Integration with SAP BCM

    Hi
    Can Cisco UCCX 8 be integrated with SAP BCM for the crm requirements?
    Thanks,

    I have heard that these guys offer an integration but have not worked with them myself:  http://www.tcandc.com/cisconn

  • Cisco Media Convergence Server 7825-I5 for Cisco Contact Center Express

    Hi all
    I have a quick question, we recently ordered a HA server for our UCCX enviroment, the server came in yesterday and one of the engineers took it and is trying to use it as a lab server for voice and he is trying to install CM on it. He keeps getting stuck and the DVD won't load, correct me if I'm wrong but is the server configured just to run a UCCX DVD or will it run any UC software.Thanks in advance for any help and have a great day.

    Hi Manuel Mora Jimene,
    Please refer the "Table 29-5     Maximum Number of Endpoints Per Server Platform or OVA Template " in the below link,
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/9x/sizing.html
    Hope it helps.
    Anand

  • Contacts search for cisco Jabber for Windows & MAC

    Hello,
    Please assist on given below query !!
    System Deatails of CUCM & IM Presence Server
    CUCM:
    1>  System version: 9.1.1.20000-5
    2>  VMware Installation: 2 vCPU Intel(R) Xeon(R) CPU X5650 @  2.67GHz, disk 1: 80Gbytes, 4096Mbytes RAM
    3> Physical Server UCS210 M2
    4>  Already Integrated with IM & Presence
    IM & Presence:
    1>  System version: 9.1.1.20000-5
    2>  VMware Installation: 1 vCPU Intel(R) Xeon(R) CPU X5650 @  2.67GHz, disk 1: 80Gbytes, 2048Mbytes RAM
    3> Physical Server UCS210 M2
    4>  Already Integrated with CUCM
    Requirement:
    1>  User Search base for Cisco Jabber for Windows & MAC Client
    2>  Will we able to get contacts list(Jabber For windows & MAC) as like "Lotus Sametimes" for all users?
    Every reply would highly Appreciated!!

    Hi Karthik,
    Thanks for your reply!
    I have gone through the link but query is different actually, please assist on below query and provide any document links if possible.
    1>  The contacts does not appear when I perform a search
    2>  Do I required to integrate LDAP for same? If Yes Then Do I need to perform integration with CUCM Or IM & Presence? Or Only CUCM? Or only IM & Presence? (Please post a link to perform same)
    3>  Please also provide If any specific system requirement for LDAP server.
    4>  Is it possible without LDAP integration?
    It is really urgent and every post would highly appreciate..........

  • No variable audio output for Cisco CHS 435HDC set top box.

    Background:  Until the other day I had my stb connectected to a TV, using TV sound, with an HDMI cable.  The P265v2 remote volume control changed the TV volume.  No problems.
    My new TV & home theater system was recently installed.  We don't use the TV speakers.  While my first preference was to program the Verizon remote to change the volume on my Onkyo receiver, this did not appear to be an option on the remote's programming instruction page on the Verizon website.  Instead, I am directed to change a setting on the remote that makes the Verizon remote change the stb output volume vs the tv volume.  I changed the setting on the remote and ensured the stb box was set up for "variabe" audio output.
    Problem:  Using the stb variable audio settings, volume settings 1 through 30 produce the same volume.  (Volume setting 0 produces no volume, as one would hope.)  It appears the "variable" setting isn't producing a variable output as it should be on this unit.
    Thinking that maybe the receiver was complicating the sitation, I tried connecting the stb to the old TV and the new TV directly and had the same results.
    Now, while I am watching TV, I need to have the receiver remote at hand in addition to the Verizon remote.  It would be nice to have the volume be adjustable as it should be while using the Verizon remote.  I don't like the idea of using a seperate universal remote because then I would lose some of the functionality that the Verizon remote provides when watching TV, using the DVR, watching on demand, etc.
    I would like to know if this is a problem just with my unit, or if it exists with all of these units, which would hopefully be fixed with a Cisco/Verizon firmware update soon, hopefully.
    Thank you.

    soups230 wrote:
    Having same issues with hdmi and optical. Any fix to this.
    Hello,
    In order to control the volume on your home theater system, you'll need a FiOS TV Universal Remote that has the 4-buttons on the top for 'DVD', 'Aux'iliary, 'TV' and 'STB'.  The audio receiver would have to be programmed into the FIOS TV Remote, and controlled using the 'Aux'iliary button.
    Verizon's 4-Button Universal Remote Controls are available for purchase:
    a) online via www.verizon.com/fiosaccessories
    OR
    b) at a local FiOS TV store (call first to check if they have them in stock).  For a list of stores:  http://www22.verizon.com/support/residential/tv/fiostv/general+support/account+issues/questionsone/8...
    Presently, the default remotes for new set top boxes are the 2-button P-265 (newer version) remotes.
    Regarding a problem with HDMI/optical on Cisco 435 STBs, check out the following:
    Go to this webpage:  http://www22.verizon.com/Support/Residential/TV/FiOSTV/Receivers/Equipment+Issues/QuestionsOne/12839...
    Click on the link for 'Cisco CHS 435 HD DVR User Guide'.
    Open the PDF and go to page 22 for 'Connecting to a Home Theater System...'.
    Hope this helps!

  • Rrack mounting brackets for Cisco switch SF300-48P ?

    Does anyone know how to get rack mounting brackets for Cisco switch SF300-48P ?

    You might be able to get them through Cisco support.  Check this thread: https://supportforums.cisco.com/discussion/11201291/sf-300-series-rack-mount-brackets

  • RAID Configurations for Cisco servers

    Hi All,
    What is the RAID configuration for Cisco Appliance(Version 8.5) like CUCM, CUPS, CUIC, Unity etc?RAID Configuration will be done while installtion itself or we need to do it explicitly?
    Regards,
    Adithya

    Hi Geoff,
    Thanks for the reply. Just wanted to know whether if this RAID configuartion is similar to the other server RAID where we install Cisco applications.(Like OS & Application Software is RAID 1 and Database is RAID10).
    Regards,
    Adithya

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.
    Samir

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

Maybe you are looking for

  • Keyboard & trackpad not recognized after sleep

    I have a brand new 2012 iMac with a frustrating problem, neither the keyboard or the trackpad is recognized after the machine has gone to sleep. Once I unplug the keyboard and replug it in, it is fine. Once I turn the trackpad on and off it is fine.

  • Error while trying to activate R/3 datasource from BI with T-Code rsa5

    hi all, i want to activate a particular datasource in R/3 through BI.iam following the below steps. RSA1-->source system>select source system>right click>connection parameters>remote logon>rsa5-select datasource. when iam trying to activate from rsa5

  • Can't delete songs from playlists

    While transferring my library to a new computer, songs were put into the wrong playlists. In trying to correct this, I find that itunes won't allow me to delete any songs from existing playlists. Nothing happens when you hit the delete button and del

  • Random number prob

    i am trying to create an array tht outputs random numbers...i keep getting one error which is in the for statement...can anyone help me weed this problem out? import java.util.* ; public class Arrays2{           // main(): application entry point    

  • I got an answer and I replied with a question about the answer, does no show in unanswered

    I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that? He said - Certain Firefox problems can be solved by performing a Clean rein