Unify & UCCXCTI - how tightly integrated - worried ref patching etc

Hi
We are currently lookingt at upgrading out old 4.1 Call Manager to the latest Unified version with new hardware etc.
In our organisation we also have a call centre where we currently use a third party ACD solutuon that links in with a tapi connection to call manager.
We also are looking at changing the ACD solution to a more scalebale, with more module options version as we sell these options to our clients.
UCCXCTI has been mentioned but I am concerned that, even though its standalone in its own virtual box, it seems its integrated with Unify quite alot. I have also heard that if we need to patch/upgrade UCCXCTI to say get the latest modules orbug fixes, we may also have to upgrade Unify also at times. Is this correct?
As we sell our call centre solution and the various modules in the ACD, I am thinking if indeed UCCXCTI and Unify are so heavily connected we should have a standalone system that, again is linked even via a tapi or sip connection with Unify.
Any advice appreciated.
Scott

I am assuming that since you refer to CallManager specifically that when you reference, "Unify", you are referring to Unity which is the Unified Messaging solution for Cisco.  If that is the case, Unity and UCCX are independent of one another.  CallManager and UCCX are tightly integrated and there are some considerations in regards to application version upgrades across platforms.  As for patching of the OS and such, less integration there IMO - and moving into UC 8.0, UCCX will be moving to the Linux platform to match the CUCM and other applications.
Hailey

Similar Messages

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How to check whether a patch is applied or not when we apply a patch using patch.sh in oracle apps 11i

    Hi,
    If we apply patch using adpatch,we can know whether the patch is applied or not by checking ad_bugs,even with opatch we can check by using opatch lsinventory...
    But when we apply patch with patch.sh then how can we find out whether a patch is applied or not.
    I have to apply patch 14615390 and  16414360...but how can i know whether those patches are already applied or not. We have jre upgrade so we need to find out whether these patches or already applied or not.
    Thanks in advance,

    These are patches for Forms aren't they?
    I think this has been addressed before
    How to know if a patch has been applied to Forms?
    As the mighty Hussein points out in that post, refer to How to verify if a patch has been installed (Doc ID 105158.1)
    DA

  • Tighter Integration with Active Directory User Groups

    I just wrapped up a Jabber deployment with IM&P 9.1(1) and J4W clients 9.1(3).
    The customer asked me if it is on Cisco's roadmap to allow groups in Active Directory to be pulled into the Jabber client.  The primary business case is to allow those in IT to send out IM blasts to the corporation or certain departments.
    Obviously, this would require a significant amount of development and a much tighter integration with Active Directory, but I need to ask anyway.
    Has something like this been identified and placed on any roadmap?
    Thanks,
    Matthew Berry

    Unfortunately this kind of questions cannot be addressed here, roadmap questions need to go thru official channels for an answer.
    You need to reach your SE/AM for this question.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • How to integrated 2 model.jpx

    hello all i'm newbie in jdev 11.... :D
    in this case, i've 2 application and want to combine into 1 application. how to integrated 2 model.jpx
    so anyone help me, for solve this problem.....?
    thx regards
    agungdmt

    hii NewBee, thx for your response before....:D
    i've follow your suggest
    1. in first project i'm select > model and right click select > deploy > new deployment profile : [details]
    - i'm choice ADF library jar for profile type.
    - and change Deployment profile name with "Testgan.jar".
    the .jar file save in C:\JDeveloper\mywork\UserSecurityLogin\Model\deploy
    2. in second project i'm select > model and right click > project properties > libraries and path > in classpath entry i'm choice add jar directory (button) > then browse fisrt project to get Testgan.jar
    3. when i'm refresh my data control > still 1 model.jpr (AppModule)
    any step i'm miss it ?
    thx
    agungdmt

  • How to identify XML gateway patch version in R12 ?

    Hi,
    how to identify XML gateway patch version in R12.1.3? Which is the latest version available for R12.1.3
    Regards

    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> @ecxver.sql
    ECX_UTL_XSLT_DIR Profile :
    /usr/tmp
    ECX_OAG_LOGICALID Profile :
    ECX_SERVER_TIMEZONE Profile:
    ECX_SYS_ADMIN_EMAIL Profile:
    ECX_XML_VALIDATE_FLAG Profile: Y
    ECX_XML_MAXIMUM_SIZE Profile : 2000000
    utl_file_dir :
    /usr/tmp, /usr/tmp,
    /busdata/dfop/nca1/db/tech_st/11.1.0/appsutil/outbound/dfopnca1_oncerpd4,
    /usr/tmp, /busdata/dfop/nca1/db/tech_st/11.1.0/ccr/state
    Oracle XML Developers Kit 11.1.0.7.0 - Production
    Parser Version Ok
    XML Gateway Status Summary
    XML Parser Version OK
    All ECX Objects Valid? OK
    All XML Parser Objects Valid? OK
    OTA Running? N/A*
    Total Messages on Outbound Queue 0
    OTA Msgs on Outbound Queue 0
    Others Msgs on Outbound Queue 0
    Messages on Inbound Queue 0
    *Please use the ECXOTAPing.html as described in the Testing Oracle Transport
    Agent section of the User's Guide
    End of Summary
    Service Component Control Event Subscriptions
    EVENT_NAME RULE_FUNCTION OUT_AGENT STATUS
    oracle.apps.ecx.inbound.message.process [email protected]. MICHELIN.COM Not Defined ENABLED
    oracle.apps.ecx.inbound.message.process [email protected] N.COM Not Defined ENABLED
    oracle.apps.ecx.inbound.message.receive [email protected] N.COM Not Defined ENABLED
    oracle.apps.ecx.inbound.message.receive CLN_XMLG_EVENT_HANDLER_PKG.CLN_XMLG_SET [email protected] Not Defined ENABLED
    NC.MICHELIN.COM
    oracle.apps.ecx.inbound.message.receive CLN_XMLG_EVENT_HANDLER_PKG.CLN_XMLG_EVE [email protected] Not Defined ENABLED
    .MICHELIN.COM
    oracle.apps.ecx.inbound.message.receive CLN_XMLG_EVENT_HANDLER_PKG.CLN_XMLG_EVE [email protected] Not Defined ENABLED
    .MICHELIN.COM
    oracle.apps.ecx.inbound.message.receive [email protected]. MICHELIN.COM Not Defined ENABLED
    oracle.apps.ecx.processing.message.callb [email protected] LIN.COM Not Defined ENABLED
    ack
    oracle.apps.ecx.processing.message.error CLN_XMLG_EVENT_HANDLER_PKG.CLN_XMLG_PRO CESSING_ERROR_F@DFOPN Not Defined ENABLED
    CA1.ONC.MICHELIN.COM
    oracle.apps.ecx.processing.message.error [email protected] LIN.COM Not Defined ENABLED
    oracle.apps.ecx.processing.message.error [email protected] LIN.COM Not Defined ENABLED
    oracle.apps.ecx.processing.message.error [email protected] N.COM Not Defined ENABLED
    oracle.apps.ecx.processing.notification. [email protected] LIN.COM Not Defined ENABLED
    send
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Regards

  • How do i download a patch(ex: level 10) and screen painter patch for gui ?

    Hello,
    how do i download a patch(ex: level 10) and screen painter patch for gui ?
    Thanks,
    Shehryar

    Hi,
    Please see 323878 and 303476.
    I believe that you 'll find there the solutions.
    Regards
    Nuno Mendes Fernandes

  • How to get latest CPU patch information

    Hi Gurus,
    Good Morning.
    How to get latest CPU patch information for our EBS 11i system, how to get alerts when ever they released CPU patches.

    Check  the SAWWAN'S Excellent previous post regarding developer patches , this post will give you entire information about Developer patches.
    Re: how to find the developer version
    Re: Developer 6i patches
    Check this metalink notes , hope this helps.
    Note: 466890.1 - Script to find Apache, Java, Jinitiator, Forms version and JVM details for Oracle E-Business Suite 11i
    Note: 392793.1 - How to Obtain Oracle Forms Version in Oracle Applications 11i from Command Line
    Edited by: Amigo on Dec 22, 2010 9:20 AM
    Edited by: Amigo on Dec 22, 2010 9:21 AM
    Edited by: Amigo on Dec 22, 2010 9:26 AM

  • How to view all the patches installed in a WebLogic

    Hi All,
    Is there a way on how to view all the patches installed in a WebLogic Server particular the 10.3.1?
    Thanks,
    Ace

    Hi,
    Check table devaccess. to get all developers list
    Reward points if helpful.
    Regards,
    Mukul
    Edited by: Mukul Sharma on Jun 2, 2008 12:10 PM

  • How to integration between one model to another model

    hi friends
    can any one explain me
    how to integration between one model to another model 
    ex:- i have sales model 1 and  i have anther model finance model how to changes  in figures in sales model as well same change are happen in finance model how it possibly please explain me friends   
    and how many ways i can do this ?
    Thank you
    suresh m

    Hi Suresh,
    If you do changes in Finance and want to send data in Sales , you can use LOOKUP /DESTIANTION_APP -script logic or ABAP logic.
    To have seamless flow, you need to take care of security.
    Explain your requirement in  more detail .
    May be helpful .
    Shrikant

  • How to install the OWB patch 2864550

    hi, friends, i am a newbie to OWB.
    can u tell me how to install the owb patch 2864550?
    it seems that this patch is not like other oracle patchs which consists of the products.jar that can be used by the oracle installer.
    thx

    Hi ,
    ... just follow the instructions in File "ReadMe.txt" included in the ZIP-File.
    Regards
    Martin

  • How to install the oracle patch in the HP_ux server.

    Hi,
    we are  using oracle server 9.2.0.8. We are decided to install the oracle patch in the oracle server.
    How to install the oracle patch?
    Please suggest me,
    Urgent.
    Regards
    S.Prasad

    hi,
    left upper corner on this forum.
    there is a box that "says" Search
    It is very easy to use, it is not necessary to be an Engineer.
    apart of the notes, there is (at least) one EXACT query like yours:
    [O patch apply procedure in Hp-ux and IBM aix|Re: O patch apply procedure in Hp-ux and IBM aix]

  • How can apply Oracle BPEL patch to Oracle BPEL Process manager??

    Hi, Gurus:
    I am new to Oracle BPEL Process manager, I successfully install Oracle BPEL Process manager, but I need to install Oracle BPEL patch and the examples within it.
    so I download bpelpatches.zip, it has over 106 MB.
    It contains:
    1. p4369818_101200_GENERIC.zip
    2. p4343748_101200_GENERIC.zip
    3. p4406640_101200_GENERIC_Patch01.zip
    4. p4469111_101200_GENERIC_Patch02.zip
    I am using window XP, how Can I apply these patches to my system??
    How can apply Oracle BPEL patch to Oracle BPEL Process manager??
    Thanks a lot!!
    Charlie

    don't see any invoke in your client against the intiate operation.. - which creates the correlation
    only 2 of them
    <invoke name="Invoke_1" partnerLink="PartnerLink_1" portType="ns1:CorrelatedBPELProcess" operation="receive1" inputVariable="Invoke_1_receive1_InputVariable"/>
    <invoke name="Invoke_2" partnerLink="PartnerLink_1" portType="ns1:CorrelatedBPELProcess" operation="receive2" inputVariable="Invoke_2_receive2_InputVariable"/>
    compared to this def of the process
    <portType name="CorrelatedBPELProcess">
    <operation name="initiate">
    <input message="client:CorrelatedBPELProcessRequestMessage"/>
    </operation>
    <operation name="receive1">
    <input message="client:CorrelatedBPELProcessRequestMessage"/>
    </operation>
    <operation name="receive2">
    <input message="client:CorrelatedBPELProcessRequestMessage"/>
    </operation>
    </portType>

  • How and where to  check Patch level in XI

    Hi,
    Can any one let me know how and where to  check Patch level for  XI systems.
    Ex: 14SAPXIAFC17P_14.sca
    Also pls provide me with the procedure for applying  above patch.
    Shavali

    Hi Shavali -
    http://<host>:<j2ee_http_port>/sap/monitoring/ComponentInfo
    also
    http://<host>:<j2ee_http_port>/sap/monitoring/SystemInfo for core system info (J2EE or JVM patch level, etc.)
    BTW, you need <i>SAP_J2EE_ADMIN</i> role for this.
    Regards,
    Jin

  • How to update the dps patch to my current Adobe CS6

    how to update the dps patch to my current Adobe CS6

    http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml
    Neil

Maybe you are looking for

  • HT201398 iphone keeps asking for apple id over and over when trying to update or download apps

    Each time I try to update or install new apps, I keep getting asked over and over for my Apple ID.  I enter it correctly and then nothing happens.

  • Photoshop Elements 7 Brush help?

    Usually i'm good with fixing problems on Pse but I just got this recent problem (brush problem) that I can't seem to fix. As you see in the image every time I draw especialyl with 1 px it comes out like a broken line. When it's a bigger px it also co

  • Please Help !  Simple question !

    Hi all, Please anybody tell me why the following line <input type="text" name="price" value="<%=myBean.getPrice()==0.0?"":myBean.getPrice()%>">gives me the error: incompatible types for ?: neither is a subtype of the other second operand: java.lang.S

  • Paragraph Setup in Adobe InDesign CS3

    I would like to create a paragraph style where the first line is b UPPERCASE BOLD, the second line is UPPERCASE REGULAR and all other lines are lowercase regular. Has anyone an idea as to how to setup this paragraph style? I tried paragraph styles an

  • Error reconciliating solaris resource

    I have tried reconcilie a solaris resource from identity manager I get this error: Servlet.service() for servlet jsp threw exceptionjava.lang.StackOverflowError     at java.lang.Exception.<init>(Exception.java:41)     at java.io.IOException.<init>(IO