Uninitialized logical page after database load

Hi Guys
I am struggling to restore a database to a new server. I have a brand new installation of ASE 16 on Windows server 2008. I have run the following commands:
disk init name ="TWSDEV1DB", physname="c:\sapdata\TWSDEV1DB.dbf", size="5000M"
go
disk init name ="TWSDEV1DBLOG", physname="c:\sapdata\TWSDEV1DBLOG.dbf", size="5000M"
go
sp_helpdevice
go
CREATE login cssdmw with password cssdmw;
Then I ran this....
CREATE DATABASE TWSDEV1DB on TWSDEV1DB = "4250M" for load;
go
ALTER DATABASE TWSDEV1DB for load;
go
load database TWSDEV1DB from 'compress::1::/temp/TWSDEV1DB.dmp_1409151614.sc'
stripe on 'compress::1::/temp/TWSDEV1DB.dmp_1409151614.sc1'
stripe on 'compress::1::/temp/TWSDEV1DB.dmp_1409151614.sc2'
stripe on 'compress::1::/temp/TWSDEV1DB.dmp_1409151614.sc3'
go
online database TWSDEV1DB
go
The online database is erroring with an Uninitialized logical page.
Any help would be welcome.

Hi David,
I don't think the fact that your database creation script probably doesn't match the original layout of the source database is causing this error. You should be able to load any dump into a database that is the same size as the source regardless of layout (assuming same page size, character set, sort order, etc). Matching the layout does make things "prettier" (log fragments end up on devices named "log...", etc, but the load should succeed and the database be functional regardless.
I agree with Jeff that the "with compression" option should be used in preference to the older "compress::" syntax. The "with compression" feature is more flexible as the dump header and trailer can be read, the dump can be made to a remote backupserver, etc.
There is a known bug on 16.0 that results in this 692 error, which is CR 764402. The error is specific to the use the "for load" option. I recommend that you drop the database and create it without using "for load"; the process will take longer as it initializes every page, but it will avoid the bug. A fix for the bug is expected in the 16.0 SP00 PL04 release (I don't have an expected date for it, but should be fairly near future).
Cheers,
-bret

Similar Messages

Unable to display page after database clone

We are currently running Application Express 4.02 using Oracle Web Logic on a Suse Linux 11 server. We had a new database set up for APEXPRD port 1542 that was working correctly with application express. We also had a database set up for APEXTST port 1542 (on a different database server). We removed the APEXPRD database from the database server using DBCA and then used OEM to clone the APEXTST instance to the production server. Our new database instance has the name APEXPRD with the port 1542. We have recycled all services on the APEX server but our APEX Production site no longer runs -- just getting unable to display page error 404. We checked our dads.conf file to ensure no changes were needed but everything appears correct there since the database name and port did not change.
Is there anything within the database or any other configuration files that I would need to change to get APEX to work after a database clone?
Thank you!
Amber

We got this resolved...We modified the dads.conf file to show the debug information in the browser window. From this we found where our cloned database had no temporary datafile. Once this datafile was created the APEX works correctly.
Thanks!

Unable to open E-business suite login page after database upgrade

I have successfully upgraded the 11i E-business suite database 10.2.0.3 to 11.1.0.7. After upgradation i have all services running on apps tier and database, but i cannot open the login page.
The below are the errors from error log file
[Wed Nov 25 11:21:38 2009] [notice] FastCGI: process manager initialized (pid 22989)
[Wed Nov 25 11:21:39 2009] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Wed Nov 25 11:36:41 2009] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that yo
ur configuration file is not correct.
[Wed Nov 25 11:36:41 2009] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that y
our configuration file is not correct.
[Wed Nov 25 11:36:41 2009] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that yo
ur configuration file is not correct.
[Wed Nov 25 11:49:41 2009] [warn] pid file /u02/prodora/iAS/Apache/Apache/logs/httpd.pid overwritten -- Unc
lean shutdown of previous Apache run?
[Wed Nov 25 11:49:41 2009] [notice] FastCGI: process manager initialized (pid 17194)
[Wed Nov 25 11:49:42 2009] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Wed Nov 25 11:52:49 2009] [error] [client 10.65.4.69] File does not exist: /u02prodcomn/portal/DBAS_ed
bs12/
[Wed Nov 25 11:54:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:54:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:05 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:07 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:57:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
Edited by: user12196525 on 25-Nov-2009 06:28

Hi,
Autoconfig was successfull, All the services are up and running on apps and db tier.
from error.log
[Wed Nov 25 15:46:21 2009] [error] [client 10.65.4.69] File does not exist: /u02/prodcomn/portal/DBAS_ed
bs12/
[Wed Nov 25 15:46:25 2009] [error] [client 10.65.4.69] File does not exist: /u02/prodcomn/portal/DBAS_ed
bs12/
[Wed Nov 25 15:47:01 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:47:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:47:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:49:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:49:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:49:06 2009] [error] [client 10.65.4.69] File does not exist: /u02/prodcomn/html/US/ICXINDEX_
DBAS_edbs12.html
[Wed Nov 25 15:50:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:50:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:50:05 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:50:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:50:07 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:52:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:52:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:52:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:54:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:54:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:05 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:07 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:57:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:57:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:57:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:59:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:59:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:05 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:07 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:02:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 16:02:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 16:02:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
Regards

Why "Tuvaro" is highjacking my computor and home page after down loading and installing firefox ?

when ever I down load and install fire fox the home page is automatically changed in to "Tuvaro" and changes all settings. I tried several times, and the same repeated. so I totally uninstalled from my system and like to reinstall without Tuvaro. is it possible ? I am using acer i5 with window7. 64 bit.

Dear Mr. Philipp, thank you very much for your help and support. I could solve the problem much easier than I thought and regain the fire fox without "Tuvaro". thanking you once again, with regards.

Attempt to fetch logical page (6:78) in database 5 failed.

Hello every one:
I am upgrading to SQL 2005 using sql 2000 datafiles in clustered environment.
I have followd note 799058 hemogenious system copy. However after attaching the database, we are getting the following error message, when running SQL 2005 upgrade tools.
I ran dbcheck on source database there is no issue, However dbcheck is failing in new database. I tried dbcheck with repais fast and dbcheck with data loss, however both attempts have failed with exact same message.
I am not sure how to handle this error.
Please advice.
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select (@@microsoftversion / 65536) / 256
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from master..sysdatabases where name = 'R3T'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from R3T..sysusers where name = 'r3t'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from master..sysprocesses where dbid = db_id('R3T') and program_name like 'R3%' and uid = (select uid from R3T..sysusers where name = 'r3t')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select (@@microsoftversion / 65536) / 256
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
DECLARE @n NVARCHAR(4000) DECLARE @ns NVARCHAR(4000) SET @ns = ''
DECLARE c CURSOR FOR
select case when serverproperty('Collation') is NULL then '' else convert(sysname, serverproperty('Collation')) end
union all select case when serverproperty('Edition') is NULL then '' else convert(sysname, serverproperty('Edition')) end
union all select case when serverproperty('InstanceName') is NULL then '' else convert(sysname, serverproperty('InstanceName')) end
union all select case when serverproperty('IsClustered') is NULL then '' else convert(sysname, serverproperty('IsClustered')) end
union all select case when serverproperty('IsFullTextInstalled') is NULL then '' else convert(sysname, serverproperty('IsFullTextInstalled')) end
union all select case when serverproperty('IsIntegratedSecurityOnly') is NULL then '' else convert(sysname, serverproperty('IsIntegratedSecurityOnly')) end
union all select case when serverproperty('IsSingleUser') is NULL then '' else convert(sysname, serverproperty('IsSingleUser')) end
union all select case when serverproperty('IsSyncWithBackup') is NULL then '' else convert(sysname, serverproperty('IsSyncWithBackup')) end
union all select case when serverproperty('MachineName') is NULL then '' else convert(sysname, serverproperty('MachineName')) end
union all select case when serverproperty('NumLicenses') is NULL then '' else convert(sysname, serverproperty('NumLicenses')) end
union all select case when serverproperty('ProcessID') is NULL then '' else convert(sysname, serverproperty('ProcessID')) end
union all select case when serverproperty('ProductVersion') is NULL then '' else convert(sysname, serverproperty('ProductVersion')) end
union all select case when serverproperty('ProductLevel') is NULL then '' else convert(sysname, serverproperty('ProductLevel')) end
union all select case when serverproperty('ServerName') is NULL then '' else convert(sysname, serverproperty('ServerName')) end
union all select case when serverproperty('Release') is NULL then '' else convert(sysname, serverproperty('Release')) end
union all select case when serverproperty('Patch') is NULL then '' else convert(sysname, serverproperty('Patch')) end
union all select case when serverproperty('IsSysAdmin') is NULL then '' else convert(sysname, serverproperty('IsSysAdmin')) end
OPEN c FETCH NEXT FROM c INTO @n
WHILE @@FETCH_STATUS = 0
BEGIN set @ns = @ns + @n + ';' FETCH NEXT FROM c INTO @n END
CLOSE c DEALLOCATE c select @ns
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select IS_SRVROLEMEMBER('sysadmin')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from master..sysdatabases where name = 'R3T'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from R3T..sysusers where name = 'r3t'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from R3T..sysusers where name = 'r3t'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use R3T
declare @info nvarchar(2000)
declare @cs nvarchar(100)
declare @tmp nvarchar(200)
declare @rel nvarchar(100)
declare @patch nvarchar(100)
declare @sql nvarchar(2000)
declare schema_cursor cursor for
select name
from dbo.sysusers
where islogin = '1'
open schema_cursor
select @info = ''
fetch next from schema_cursor into @cs
while @@fetch_status = 0
begin
select @info = @info + @cs
select @info = @info + ':'
select @info = @info + cast(count(*) as varchar(20)) from sysobjects where uid = user_id(@cs) and name not in ('dtproperties')
select @info = @info + ':'
select @info = @info + cast(count(*) as varchar(20)) from sysobjects where uid = user_id(@cs) and type = 'U' and name not in ('dtproperties')
if exists(select * from sysobjects where name = 'CVERS' and uid = user_id(@cs) and type = 'U')
begin
select @info = @info + ':1'
select @sql = 'select @rel = RELEASE, @patch = EXTRELEASE from ' + @cs + '.CVERS where COMPONENT = ''SAP_BASIS'''
exec sp_executesql @sql, N'@rel nvarchar(100) output, @patch nvarchar(100) output', @rel output, @patch output
select @info = @info + ':'
select @info = @info + @rel
select @info = @info + ':'
select @info = @info + @patch
end
else select @info = @info + ':0'
if exists(select * from sysobjects where name = 'BC_CVERS' and uid = user_id(@cs) and type = 'U')
begin
select @info = @info + ':1'
end
else select @info = @info + ':0'
select @info = @info + ';'
fetch next from schema_cursor into @cs
end
close schema_cursor
deallocate schema_cursor
select @info
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use [R3T] select count(*) from sysobjects where name like 'Y%' and type='P' and uid=user_id('r3t')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from R3T..sysusers where name = 'SAPR3TDB'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
DECLARE @n NVARCHAR(4000) DECLARE @ns NVARCHAR(4000) SET @ns = ''
DECLARE c CURSOR FOR
select case when serverproperty('Collation') is NULL then '' else convert(sysname, serverproperty('Collation')) end
union all select case when serverproperty('Edition') is NULL then '' else convert(sysname, serverproperty('Edition')) end
union all select case when serverproperty('InstanceName') is NULL then '' else convert(sysname, serverproperty('InstanceName')) end
union all select case when serverproperty('IsClustered') is NULL then '' else convert(sysname, serverproperty('IsClustered')) end
union all select case when serverproperty('IsFullTextInstalled') is NULL then '' else convert(sysname, serverproperty('IsFullTextInstalled')) end
union all select case when serverproperty('IsIntegratedSecurityOnly') is NULL then '' else convert(sysname, serverproperty('IsIntegratedSecurityOnly')) end
union all select case when serverproperty('IsSingleUser') is NULL then '' else convert(sysname, serverproperty('IsSingleUser')) end
union all select case when serverproperty('IsSyncWithBackup') is NULL then '' else convert(sysname, serverproperty('IsSyncWithBackup')) end
union all select case when serverproperty('MachineName') is NULL then '' else convert(sysname, serverproperty('MachineName')) end
union all select case when serverproperty('NumLicenses') is NULL then '' else convert(sysname, serverproperty('NumLicenses')) end
union all select case when serverproperty('ProcessID') is NULL then '' else convert(sysname, serverproperty('ProcessID')) end
union all select case when serverproperty('ProductVersion') is NULL then '' else convert(sysname, serverproperty('ProductVersion')) end
union all select case when serverproperty('ProductLevel') is NULL then '' else convert(sysname, serverproperty('ProductLevel')) end
union all select case when serverproperty('ServerName') is NULL then '' else convert(sysname, serverproperty('ServerName')) end
union all select case when serverproperty('Release') is NULL then '' else convert(sysname, serverproperty('Release')) end
union all select case when serverproperty('Patch') is NULL then '' else convert(sysname, serverproperty('Patch')) end
union all select case when serverproperty('IsSysAdmin') is NULL then '' else convert(sysname, serverproperty('IsSysAdmin')) end
OPEN c FETCH NEXT FROM c INTO @n
WHILE @@FETCH_STATUS = 0
BEGIN set @ns = @ns + @n + ';' FETCH NEXT FROM c INTO @n END
CLOSE c DEALLOCATE c select @ns
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select IS_SRVROLEMEMBER('sysadmin')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
DECLARE @n NVARCHAR(4000) DECLARE @ns NVARCHAR(4000) SET @ns = ''
DECLARE c CURSOR FOR
select case when serverproperty('Collation') is NULL then '' else convert(sysname, serverproperty('Collation')) end
union all select case when serverproperty('Edition') is NULL then '' else convert(sysname, serverproperty('Edition')) end
union all select case when serverproperty('InstanceName') is NULL then '' else convert(sysname, serverproperty('InstanceName')) end
union all select case when serverproperty('IsClustered') is NULL then '' else convert(sysname, serverproperty('IsClustered')) end
union all select case when serverproperty('IsFullTextInstalled') is NULL then '' else convert(sysname, serverproperty('IsFullTextInstalled')) end
union all select case when serverproperty('IsIntegratedSecurityOnly') is NULL then '' else convert(sysname, serverproperty('IsIntegratedSecurityOnly')) end
union all select case when serverproperty('IsSingleUser') is NULL then '' else convert(sysname, serverproperty('IsSingleUser')) end
union all select case when serverproperty('IsSyncWithBackup') is NULL then '' else convert(sysname, serverproperty('IsSyncWithBackup')) end
union all select case when serverproperty('MachineName') is NULL then '' else convert(sysname, serverproperty('MachineName')) end
union all select case when serverproperty('NumLicenses') is NULL then '' else convert(sysname, serverproperty('NumLicenses')) end
union all select case when serverproperty('ProcessID') is NULL then '' else convert(sysname, serverproperty('ProcessID')) end
union all select case when serverproperty('ProductVersion') is NULL then '' else convert(sysname, serverproperty('ProductVersion')) end
union all select case when serverproperty('ProductLevel') is NULL then '' else convert(sysname, serverproperty('ProductLevel')) end
union all select case when serverproperty('ServerName') is NULL then '' else convert(sysname, serverproperty('ServerName')) end
union all select case when serverproperty('Release') is NULL then '' else convert(sysname, serverproperty('Release')) end
union all select case when serverproperty('Patch') is NULL then '' else convert(sysname, serverproperty('Patch')) end
union all select case when serverproperty('IsSysAdmin') is NULL then '' else convert(sysname, serverproperty('IsSysAdmin')) end
OPEN c FETCH NEXT FROM c INTO @n
WHILE @@FETCH_STATUS = 0
BEGIN set @ns = @ns + @n + ';' FETCH NEXT FROM c INTO @n END
CLOSE c DEALLOCATE c select @ns
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select IS_SRVROLEMEMBER('sysadmin')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
exec sp_configure 'show advanced options', 1
reconfigure with override
exec sp_configure 'xp_cmdshell', 1
reconfigure with override
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
exec sp_dbcmptlevel 'R3T', 90
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use R3T select count(*) from sysobjects where type = 'P' and uid = user_id('r3t')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use R3T
declare @name sysname
declare allnames cursor for
select name from sysobjects
where type = 'P'
and (name like 'Y%' or name like 'SAP%')
and uid = user_id('r3t')
open allnames
fetch next from allnames into @name
while (@@fetch_status =0)
begin
exec ('drop procedure [r3t].[' + @name + ']')
fetch next from allnames into @name
end
close allnames
deallocate allnames
[Microsoft][ODBC SQL Server Driver][SQL Server]Attempt to fetch logical page (6:78) in database 5 failed. It belongs to allocation unit 71905451171905536 not to 281474979397632.
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use R3T select count(*) from sysobjects where type = 'P' and uid = user_id('r3t')
executeSQL is called with following parameters:

THIS IS THE SQL ERROR LOGS:
2008-05-28 15:49:20.79 spid21s     Starting up database 'R3T'.
2008-05-28 15:49:20.79 spid20s     Starting up database 'msdb'.
2008-05-28 15:49:20.82 spid20s     1 transactions rolled forward in database 'msdb' (4). This is an informational message only. No user action is required.
2008-05-28 15:49:20.84 spid20s     0 transactions rolled back in database 'msdb' (4). This is an informational message only. No user action is required.
2008-05-28 15:49:20.84 spid20s     Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
2008-05-28 15:49:20.88 spid21s     Analysis of database 'R3T' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-05-28 15:49:20.90 spid21s     1 transactions rolled forward in database 'R3T' (5). This is an informational message only. No user action is required.
2008-05-28 15:49:21.06 spid21s     0 transactions rolled back in database 'R3T' (5). This is an informational message only. No user action is required.
2008-05-28 15:49:21.06 spid21s     Recovery is writing a checkpoint in database 'R3T' (5). This is an informational message only. No user action is required.
2008-05-28 15:49:21.06 spid5s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-05-28 15:49:21.06 spid5s      Recovery is complete. This is an informational message only. No user action is required.
2008-05-28 15:49:25.60 spid51      Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
2008-05-28 15:49:25.74 spid51      Using 'xpsqlbot.dll' version '2005.90.3042' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-05-28 15:49:25.81 spid51      Using 'xpstar90.dll' version '2005.90.3042' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-05-28 15:49:25.82 spid51      Using 'xplog70.dll' version '2005.90.3042' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-05-28 15:58:29.52 spid53      Setting database option SINGLE_USER to ON for database R3T.
2008-05-28 15:58:29.52 spid53      Setting database option SINGLE_USER to ON for database R3T.
2008-05-28 15:59:15.77 spid53      Error: 605, Severity: 21, State: 3.
2008-05-28 15:59:15.77 spid53      Attempt to fetch logical page (6:72) in database 5 failed. It belongs to allocation unit 71905451171905536 not to 281474979397632.
2008-05-28 15:59:15.78 spid53      DBCC CHECKDB (R3T, repair_fast) WITH all_errormsgs, no_infomsgs executed by sa terminated abnormally due to error state 5. Elapsed time: 0 hours 0 minutes 18 seconds.
2008-05-28 16:02:17.43 spid54      Error: 605, Severity: 21, State: 3.
2008-05-28 16:02:17.43 spid54      Attempt to fetch logical page (6:72) in database 5 failed. It belongs to allocation unit 71905451171905536 not to 281474979397632.
2008-05-28 16:02:17.44 spid54      DBCC CHECKDB (R3T, repair_allow_data_loss) WITH all_errormsgs, no_infomsgs executed by sa terminated abnormally due to error state 5. Elapsed time: 0 hours 0 minutes 10 seconds.
2008-05-28 16:04:53.26 spid54      Setting database option MULTI_USER to ON for database R3T.
2008-05-28 16:04:53.26 spid54      Setting database option MULTI_USER to ON for database R3T.
2008-05-29 00:00:06.31 spid15s     This instance of SQL Server has been using a process ID of 2016 since 5/28/2008 3:49:21 PM (local) 5/28/2008 10:49:21 PM (UTC). This is an informational message only; no user action is required.
2008-05-29 09:45:59.67 spid54      Error: 605, Severity: 12, State: 3.
2008-05-29 09:45:59.67 spid54      Attempt to fetch logical page (6:72) in database 6 failed. It belongs to allocation unit 71905451171905536 not to 281474979397632.
2008-05-29 09:45:59.69 spid54      DBCC CHECKDB (R3T) WITH no_infomsgs executed by sa terminated abnormally due to error state 5. Elapsed time: 0 hours 1 minutes 20 seconds.

How to resize the embeded player in a page after it has loaded?

Hi all
I'm working with Flash 8, with the FLV player component. The
player loads various flash videos (flv)
that can have verious sizes.
I have set the autosize detection for the player. But I want
the size of the embeded player to also
change according to the size of the loaded flv.
For example, if the loaded flv is 100px by 100px, I want the
embeded player to be 100px by 100px (in
the html code). if the flv is 500px by 350px, i want the
embeded flav to change to that 500 x 350px.
As far as I know, the sizes of the flv file cannot be
detected with PHP or javascript, so only the
component can detect the flv size. Therefore I would need a
way to re-write the embeded code after
the flv has loaded.
Anybody knows how to do that? Is it possible?
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Hi,
user13091824 wrote:
How to keep the filtered output in a page after user navigates back to all records from another page.
Currently it clears the search---While returing from page AM Return status should be True in pageContext.setForwardURL.:::
pageContext.setForwardURL("OA.jsp?page=/XXX/oracle/apps/po/msg/webui/SearchPG",
"SUPP_SEARCH",
OAWebBeanConstants.GUESS_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
---After setting AM Status to true u can able to c the values.
Regards
Meher Irk

Safari won't display page after loading

So the latest update of Safari is a few bricks short of a load...
On many pages, I get a blank page after Safari finishes loading them in. I thought it was internet problems, but when I resize the window even slightly, the content appears.
Obviously something not right...

From your Safari menu bar click Safari / Preferences then select the Security tab.
Deselect: Enable plugins.
Quit then relaunch Safari. If pages load as they should, folllow the instructions for troubleshooting.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
And check Safari / Preferences - Extensions. If you have any installed, turn that off, quit then relaunch Safari to test.
If you have anti virus software installed, that could be the culprit also.

Firefox won't load pages after a while when viewing tumblr.

In both versions 6 and 7 if I'm looking at Tumblr or any site that has any java or flash, after a few minutes pages will not load. I've disabled all add-ons and plug-ins but the behavior is the same. I've reverted to using version 5.0 and everything works fine.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Firefox stops loading pages after trying to open a heavy page

firefox stops loading pages after trying to open a page with alot of pictures etc, with big size. it just keeps on loading pages with no result.
my internet is fairly low speed so i take my time but this happened each time i tried to open such sites.
even when i close that '''tab''' and try to open just '''google.com''' , it wont load.
its solved after closing and opening firefox again . but happens again if i try to open the same heavy site

Which security software (firewall, anti-virus) do you have?
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

My 8520 took ages to load pages after upgraded OS 5vr

Hi,
I am having difficulties loading a page after I upgraded my 8520 to a OS 5. I am not sure whether this problem due to the upgrading new software or my carrier is getting slower everyday. It took me a minute just to open a 10kb page. Anyone can help?
Thanks.

Hey Areteam,
Welcome to the BlackBerry Support Community Forums.
I suggest clearing the BlackBerry Browser cache and then doing a hard reset (Battery pull).
How to clear the BlackBerry Browser cache:
http://www.blackberry.com/btsc/KB03865
Cheers!
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Safari not loading some pages after upgrade to Yosemite

iMac, mid-2010. Upgraded from Mavericks to Yosemite. Afterwards, many web pages refuse to load, partially load in Safari. Have tried all of the suggestions posted... clearing cache, DNS Prefetch disabling, DNS server changes, etc. None work.
Certain sites seem to always work like cnn.com, craigslist.org, linkedin.com... but Yahoo mail, Facebook, and many others fail to load or won't load completely.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n-\tmod date: %s\n-\tchecksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n-\t"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

After installing 4.0 try to play games on Facebook by following another players request. The game page starts to load and then the information within the page disappears or goes white. I am still able to see facebook menu but not anything within page.

I installed 4.0 on two computers and they both are unable to access the Facebook game page. I have another computer with 3.6 and don't have a problem with it. On Facebook players send request to join them on games. When I go to that game the page begins to load information and then it just disappears or goes white. I still have a Facebook menu on top of page.

Because I am having issues with Norton Security Suite with the upgrade to Firefox 4.0.1, I have been dealing with that as well, with no success to-date. However, I did notice today when I was looking in my trash, an interesting thing occurred with the upgrade that MAY have something to do with the apps. in Facebook not working correctly now with Firefox.
In my trash, there are several folders of 'Recovered Files'. Two of them are loaded with Internet Plugins for Facebook and were all dumped on May 1st, the day I upgraded to v. 4.0.1 Firefox and began having all my problems. For example, they are plugins like: plugin-cross domain.xml, plugin-gateway-1.php, plugin-102452128776.gz-72.json, just to name a few of them. Now, I am wondering if they were inadvertently removed during the upgrade process, or if they are in conflict with the new upgrade. Should I put them all back into Library -->Internet Plug-Ins to see if that resolves the problems? There are so many of them, I wish there was a way to mark them in some fashion in case I would have to remove them and not take the wrong ones out! Maybe there is a way I can color code them before I move them. I hate using 2 browsers!
I notice that 2 other people have this problem but I don't see where they left any post. I really wish Norton, Firefox, and Facebook would get this ironed out. I never had a problem with anything until this and I don't like to spend all my time trying to troubleshoot something I don't understand! Anyway, thanks for listening.

Load HTML page after animation

After searching the forum and only finding the answer for
AS2, I'm wondering if anybody can direct me to the finding the
answer to my problem in AS3. I've created multiple movieclips into
buttons that animate when you press them. I'm wondering how to have
it then direct to an HTML page AFTER the animation finishes. I've
tried several different things, and I can't seem to get this to
work.
Thanks a lot!

Can you provide the AS2 solution? I'd like to see if I can
figure it out. I just don't know that I'll find your posting
again.

Change to blank page after loaded a page

I am using Firefox 32.0.3 with Windows 7. Recently, when I load some pages, at first, every images, words, links are coming out as usual. When all the elements of the pages are loaded, that means the "Stop loading this page" symbol changes to "Reload current page" symbol, the page change to a blank page.
If I press the "Stop loading this page" symbol during loading the page, it stops and all the contents are there. I can use this method to solve the above error. However, it will be hard to know when should I press the "Stop loading this page" symbol to avoid changing to the blank page. If I press early, only part of the page could be loaded. If I press late, it change to the blank page. It is very annoying.
Except this current problem, there are 2 long-term error at Firefox. It uses a lot of memory to load the Firefox. I have only activated the Flash plug-in, no others, no toolbars. And open 1 to 2 tabs, but it still occupy a lot of memory. The second error is the Flash plug-in always crashed with Firefox. Please also fix it.

Yes, tried Safe Mode, still the same. And just updated to latest version, also the same, problem is still here.
And I have already cleared the history, caches, and cookies before I posted the question here.

Could not allocate new page for database 'TEMPDB'

Dear All,
When I try to fill up the aggregate of a cube, the job is cancelled after 16484 Seconds due to runtime error .
I couldnt do fillup though I tried lot of times. The system log information is given below.
Database error 1101 at EXE
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth
Database error 1101 at EXE
Perform rollback
Run-time error "UNCAUGHT_EXCEPTION" occurred
Short dump "080101 025044 Eapsapp1 POTARU91" generated
Transaction Canceled 00 671 ( UNCAUGHT_EXCEPTION 20080101025044Eapsapp10021 POTARU91 0011 )
Perform rollback
System Details:
BW Version : 3.5
Support Level: 19
Datebase : MS SQL Server 2000
Cube's E Table Details:
Total Rows : 318,230,953
Data Szie(KB) : 121,358,760
Index(KB) : 55,241,264
Min. Row Size: 371
Max Row Size: 393
TEMPDB database information:
DB Size(MB): 139,999
Size Used(MB): 3
Free (MB): 139,996
Log Size(MB): 342
Log Used(MB): 117
TEMPDB is having 9 Database files. Out of nine, three database file information is given below.
Logical File Name: tempdev
File Size(MB): 20,000
Used Space(MB): 0
File Size Limit(MB): 20000
File Growth Step: 250MB
Free on Disk(MB): 459,204
Logical File Name: tempdb_1_Data
File Size(MB): 14,999
Used Space(MB): 0
File Size Limit(MB): 15000
File Growth Step: 550MB
Free on Disk(MB): 2,674
Logical File Name: tempdb_2_Data
File Size(MB): 15,000
Used Space(MB): 0
File Size Limit(MB): 15000
File Growth Step: 0MB
Free on Disk(MB): 2,674
Collectively for all the 9 database file size is 140GB.
Please let me know what has to be changed in above TEMPDB size settings to avoid the issue in future.
Advanced Thanks for your solution for this issue.
Regards
Guna.

Hello,
as the message stated correctly is the tempdb full:
Logical File Name: tempdev
File Size(MB): 20,000
File Size Limit(MB): 20000
Logical File Name: tempdb_1_Data
File Size(MB): 14,999
File Size Limit(MB): 15000
Logical File Name: tempdb_2_Data
File Size(MB): 15,000
File Size Limit(MB): 15000
All files of the tempdb are restricted in size and already expanded to their maximum size. You now can either
- add another file on a disk with free space and let the file grow
- let the existing files grow to an higher amount
Best regards
Clas

Uninitialized logical page after database load

Similar Messages

Maybe you are looking for