Uninstall current video drivers

Good afternoon all:
I just purchased a HP Envy Phoenix 810-160. I want to replace the current video card (NVIDIA GeForce GT 640 graphics) and replace it with an EVGA GeForce GTX760 FTW. The EVGA website recommends uninstalling all current video drivers for the currently installed card prior to installing the EVGA card. How is the best way to accomplish this? Help is greatly appreciated.
Mike in Austin
HP ENVY Phoenix 810-160
Product# F3D90AA#ABA
Motherboard MS-7826(Kaili)
Processor i7 4770 3.9 Ghz Turbo
32 GB Ram
This question was solved.
View Solution.

Great computer, Mike. I know you will have a fun time gaming or whatever you do with it.
You can go to Device Manager / Display adapters. There you will find the driver. Right click on it and select "Uninstall". This will delete the driver. Once this is done, you can shut down the computer and install the video card.
The only concern that I have is the length of the card. It is 9.5" in length. You can make a template the size of the card to see if it will fit with room for good airflow. It appears the card has an additional power connector, also. You should add at least an inch for this connector. I would appreciate hearing if the card will fit. I am thinking about buying one the same length.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Tecra M3 video drivers causing crashes

My Toshiba Tecra M3 is crashing (freezing or blue screen of death) with drivers 71.14, 71.36, and 76.44. It uses an NVIDIA GeForce Go 6600 TE 128M. When I uninstall all video drivers (or boot into safe mode), the laptop runs fine, although of course scrolling is deadly slow and I can't suspend or hibernate. But when I install either of the two WHQL certified drivers from Toshiba's site, 71.44 or 71.36, I can consistently create a crash just by running a 3D screensaver for more than 3 minutes. The same thing happens with the 76.44 non-WHQL driver from laptopvideo2go.com.
Sorry if this is not the best thread to post on, but I would desperately appreciate any help you can offer on what driver might work reliably. At this point, I'm not at all interested in great graphics performance; I just want a stable laptop to do some work on. Is there perhaps some setting within the driver to turn off whatever fancy features are causing the crash?
The laptop has a 2.13 GHz Pentium M and 2 GB of RAM. It's running WinXP SP2 with all updates and is using BIOS 1.20, the latest. And I doubt it's a related, but here's a different problem I ran into with the VPN, Wi-Fi, and Matlab.
Thanks in advance for any help you can provide.
[Edited by: admin]

Hi danhkon
I suppose that your notebook worked properly at the beginning. Can you maybe remember since when the unit started to make these troubles to you? It is not easy to give you a proper opinion or any kind of solution because every problem is caused by some reason.
First of all I want to say that you should use just display driver given by Toshiba and not some driver that you found on the net. The drivers that you got on Tools & utilities CD or drivers that you can find on Toshiba site are all tested and they should work properly. As far as I know Tecra M3 is a new model and also delivered with SP2. That means that all drivers are also tested to work properly with SP2.
Before you spend lot of times searching the right solution you should, in my opinion, save your data and reinstall OS using Recovery CD. On this way you will have a stable laptop to do some work on it. If there is no second partition you can make it for data saving using expert mode installation.

Boot Camp - Lion / Mountain Lion latest video drivers Win 7 64-bit

I've been running Boot Camp on my late 2008 Mac Pro w/ OS X Lion and Windows 7 64-bit for some time now, no probs. Two years ago I installed the Apple version of the Nvidia GT 120 video card...has been working like a charm. Currently all latest OS updates are applied.
At issue: I'm trying to get a new plug-in for After Effects to install and it requires a more up-to-date video driver than the circa 2010 driver installed w/ Boot Camp (Leopard?). When I upgraded to Lion, I assumed all latest drivers would be installed in Boot Camp, and I've seen no info on whether Mountain Lion would provide more current video drivers...running 'Update Driver' (just to see what would happen) within Windows 7 yields "You're using the latest driver", which is not actually correct, but may be in the 'Boot Camp ecosystem'.
Are there any ways I can reliably update the video drivers? I know the retail/Nvidia latest is "296.10" from March, 2012...but likely that won't install or work properly in a Boot Camp setup (or am I wrong?).
Any info/ideas would be greatly appreciated. Thanks!

Wait for GTX 670 down the road then.
You had to have used BCA, downloaded and then run the setup - you can even just navigate to, find Nvidia driver folder and check the Details of that. Or why bother, the real driver is Nvidia anyway.
http://us.download.nvidia.com/Windows/301.42/301.42-desktop-win7-winvista-64bit- english-whql.exe
How to tell: Device Manager for one. But the easiest way to see everything, including temps, fan speeds, chipsets and driver versions - and more:
http://www.aida64.com/product/aida64-extreme-edition/overview
Also, most every Mac Pro owner has needed to manually download and install RealTek driver too for audio out the back ports.
Go to www.realtek.com though instead of using MediaFire - they have started causing a lot of pop-unders and other adware that I find disgusting and questionable, even if the site and service needs "ad dollars" popups were something users ran from and why we (try) using and turning off all those things they manage to find ways around. And the malware/adware and SQL-injection schemes are still with us. So watch for and personally avoid MediaFire - might be paranoid but then I consider it reasonable caution.
Others:
GPU-Z:
http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
AIDA64 Extreme Edition
http://www.aida64.com
http://www.aida64.com/product/aida64-extreme-edition/overview
CCleaner
http://www.piriform.com/ccleaner
Latest utilites - all in one location
http://forums.tweaktown.com/gigabyte/30530-latest-overclocking-programs-system-i nfo-benchmarking-stability-tools.html

Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

I am currently in the process of installing the latest AMD Video Drivers for Windows 8.1 (64-bit) on a Bootcamp partition. I previously had three ATI Radeon HD2600XT Graphics cards (in CrossFire) installed in a 2008 Apple Mac Pro.
I've run into several problems with trying to remove the Radeon HD2600XT graphics cards and install the latest drivers (for the Radeon R9 290 graphics card) in Windows 8.1 (64-bit), so I am creating this to be used as tutorial for others experiencing similar problems.
1) First I created a new/clean system restore point in Windows 8.1 prior to starting this.
      Instructions can be found here: http://www.intowindows.com/how-to-create-restore-point-in-windows-8-1/
2) Second, I manually tried removing/uninstalling the AMD Software from add/remove programs in Windows 8.1 (Control Panel)
      In Computer Control Panel, select "uninstall a program"
      Select AMD Install Manager (and any Catalyst Software) and remove/uninstall the software (choose "express uninstall all AMD software").
      Be sure to uninstall the AMD Install Manager.
3) In my system, the hardware drivers for the three Radeon XT2600 graphics cards were not properly removed, and the drivers for the Radeon R9 290 were not properly installed.
4) I tried running the AMD Driver Autodetect Tool
      It stated "We were unable to find your product or OS" (and failed to download or install any drivers)
      AMD Driver Autodetect displayed the following information:
Graphics hardware: 0x1002 - 0x9588 PCIE
Operating system: Windows 8.1 64-bit
5) Since the latest software/drivers were not found with the AMD Driver Autodetect, I decided to manually download the latest Graphics card drivers from the AMD website for my graphics card and for my operating system (Windows 8.1 64-bit). I created a folder called "C:\Drivers\AMD" and downloaded the latest AMD Graphics card drivers (Catalyst Software Suite 14.9) to that folder and unzipped the AMD drivers installation file. I unzipped the file which included the following drivers/files:
      Catalyst Software Suite 14.9 includes the following files:
            AMD Display Driver ver. 14.301.1001
                          OpenCL(tm) Driver
                          Catalyst Control Center
                          HydraVision
6) I downloaded and unzipped DDU v13.5.1.3 (downloaded from 3D Guru)
    I created a folder called "C:\Drivers\DDUv13.5.1.3" and unzipped the DDU installation files to that folder
7) I ran DDU v13.5.1.3 (downloaded from 3D Guru)
      It displayed the following information:
DDU Version:13.5.1.3
GPU # 0000 Detected : ATI Radeon HD 2600 XT (Microsoft Corporation - WDDM v1.1)
GPU DeviceId : pci\ven_1002&dev_9588
Detected Driver(s) Version(s) : 8.97.10.6
INF : oem55.inf
INF Section : ati2mtag_RV630
GPU # 0001 Detected : ATI Radeon HD 2600 XT (Microsoft Corporation - WDDM v1.1)
GPU DeviceId : pci\ven_1002&dev_9588
Detected Driver(s) Version(s) : 8.97.10.6
INF : oem55.inf
INF Section : ati2mtag_RV630
GPU # 0002 Detected : AMD Radeon R9 200 Series
GPU DeviceId : pci\ven_1002&dev_67b1
Detected Driver(s) Version(s) : 13.251.9001.1001
INF : oem63.inf
INF Section : ati2mtag_Hawaii
5) Based on the output above, it seems that some extremely old drivers are currently installed (v13.251.9001.1001), and I need to remove the old drivers for the hardware above, and try to install the latest AMD drivers (v14.9)
6) I rebooted the computer into Windows 8.1 "Safe Mode".
    Instructions can be found here: http://www.7tutorials.com/5-ways-boot-safe-mode-windows-8-windows-81
7) I went to the folder called "C:\Drivers\DDUv13.5.1.3" and ran DDU v13.5.1.3 and selected "Clean and restart" (in DDU 13.5.1.3) to remove ALL of the existing AMD drivers and to restart/reboot the computer.
- After removing the current display drivers (in safe mode) with DDU v13.5.1.3 and after the system rebooted, I then tried to perform a "clean install" of the latest AMD drivers (v14.9)
8) Now perform a "Clean Install" of the new AMD graphics drivers. Steps for performing a "clean install" (from AMD's website) are listed below:
To perform a 'clean install' of AMD graphics drivers:
You should make a system restore point before attempting, just in case
1. IMPORTANT: All Windows Updates should be current, including the 'optional/suggested' updates
2. IMPORTANT: Disable all anti-virus/ad blockers/anti-malware/ anti-anything before trying to install
3. IMPORTANT: Netframework is required and must be the latest version. (from Windows Update)
Download the drivers for your computer to the desktop. Follow steps 1-5 ( http://support.amd.com/en-us/download ).
Do not use 'auto-detect and install (it might not detect your graphics card or best drivers).
Delete existing drivers from your computer:
In computer control panel select 'uninstall a program'
For computers with Intel processors:
Select AMD install manager and choose 'express uninstall all AMD software'
Including the install manager.
For computers with AMD processors:
Select AMD install manager and 'custom uninstall' the graphics drivers and CCC only.
Reboot into 'safe mode'
In safe mode run Guru 3D's DDU
Reboot
Install the new driver suite.
9) I went to the folder called "C:\Drivers\AMD\AMD-Catalyst-14-9-win7-win8.1-64Bit-dd-ccc-whql" and ran setup.exe (Catalyst Install Manager)
     I selected "Express Install" as the default installation (highly recommended).
10) Rebooted the system after the Catalyst software and video driver installation.

In the end, I found out that the latest/newest Radeon drivers do not support the older Apple Radeon 2600XT graphics cards, so I was forced to remove the older Radeon 2600XT graphics cards from the system (so the newest/latest Radeon Catalyst Drivers would work). I was then able to boot directly into Windows 8.1 Pro, and the AMD Catalyst software and AMD Catalyst Drivers worked perfectly with the R9 290 graphics card (in Windows 8.1 Pro).
The only problem is that the AMD R9 290 is not supported in OS X, and now I can't boot directly into OS X because the Apple OS X graphics card drivers are missing and don't exist. Apple hasn't added AMD R9 290 graphics card support to the latest version of Apple OS X 10.10 Yosemite (or 10.9).
I posted a thread here about needing the AMD R9 290 graphics display drivers, but Apple still hasn't added the latest AMD Radeon R9 290 graphics card drivers support to the latest Apple Mac OS X 10.10.1 Yosemite operating system.
Another big Apple fail!
So now we have a wonderful new high-end AMD R9 290 graphics card and all we can do is use our Apple Mac Pro computers as Windows 8.1 Pro computers, because Apple has not updated their Apple OS X operating system to support the newest/latest AMD R9 290 graphics cards. (So we're stuck with using our Apple Mac Pro as a Windows 8.1 Pro computer) because Apple refuses to add the newest/latest hardware drivers to their latest Apple OS X operating system. Anytime you purchase an Apple computer you are stuck using really old hardware because Apple fails to update their operating system with the newest/latest hardware drivers for the latest AMD R9 290 graphics card hardware.
The only way to use the latest/newest hardware is with a Microsoft Windows 8.1 Pro computer. Hopefully Apple will get this fixed immediately, but it's already been close to a year now and Apple still hasn't fixed the problem.
We tried to contact Sapphire, and AMD, but both of them have said that it's a problem with Apple's Mac OS X operating system, and that only Apple can fix the problem and add the proper hardware drivers to their operating system.

Windows XP hangs on 'spash' screen after video drivers installed on K8N Neo4-F

Hiya folks - got a MASSIVE post for everyone here... Sorry but I think it's necessary... Here goes:
I just upgraded everything in my computer except for the HDD. New case, power supply, etc. I started by copying all important data from my original HDD to a portable USB 2.0 drive. My data is safe, and intact on that drive. So... I formated and repartitioned the oroginal hard drive (1 partition), assembled the system and everything runs perfectly. The problems come later....
The Windows installation is insanely fast and smooth... and the system boots into Windows with no problems after installation is complete. I didn't even need to install the nVidia RAID drivers because windows detects my single SATA drive fine. The First thing I do upon seeing the desktop for the first time is: Install nVidia chipset drivers, then AMD Athlon 64 driver (both latest releases). I then restart and the system boots fine. After Windows starts, I'm asked for display drivers. I click 'cancel', as specified in my ATI installation guide, open up the ATI CD and install the drivers via the ATI autorun setup. At this point, there are no further drivers for me to install and NONE of them have an "!" near them. So I figure everything is A-Okay and restart... BAM!! - Windows hangs on the splash screen. The blue bar moves for about 10 minutes, then stops for 2, then moves for 2, and so on... This will go on FOREVER.
So... I boot into safe mode and uninstall the ATI software/drivers with the help of some other third-party programs, schedule a disk check with CHKDSK and reboot. I startup in Directory Services mode to allow the disk check to complete. No errors and the system restarts on its own (supposed to). Now the system boots in normal mode again, but no video drivers installed. So I download the latest drivers from the ATI website and install them. I restart, and WHAM! -- same problem. At this point I'm thinking "bad video card" so again I go into safe mode, remove drivers, schedule disk check, etc.... restart in Dir Serv mode... "one or more errors found" this time... but that's okay.
After the auto-restart I shut down the computer and unplugged EVERYTHING but the video card, HDD and one stick of RAM... then reset the CMOS, checked battery and PSU outputs (all fine) I then went back into the BIOS to ensure everything is set to 'as safe as possible' and restarted. Again I tried the latest drivers, and again the same problem after restart. So I then booted into safe mode, but left the drivers intactthis time. I scheduled another disk check and restarted again in Dir Serv mode. After system restart I shut the computer down and switched to my other RAM stick and booted... same problem. now I'm DEFINITELY thinking "bad video card" so I plug everything back in the way it's supposed to be, reset CMOS and restart with the Windows CD the drive. I again format the HDD, etc... and install Windows.
Now, with another fresh Windows install, having read multiple tech articles, I thought this could be an issue with the NV SW IDE drivers, so I installed the driver pack minus that driver. I restarted and the system boots fine. Next, I again tried installing the latest ATI drivers, restart, and SLAMMO! -- again the system hangs on the splash screen. So, rather than waste my time with disk checks, etc... I did ANOTHER clean OS install. This time I decided to try installing video drivers BEFORE the chipset drivers... no such luck. I restart and Windows hangs in the usual spot.
NOW, I'm REALLY getting upset and can hardly contain my fists of rage that crave to desimate the computer case and all its internal componets. Time to RMA the video card. I exchange the card for the same type, thinking this will solve my problem, I drive happily home with the new card. Wouldn't you guess it... SAME PROBLEM, on ANOTHER clean OS install!!! Now I'm thinking "bad mobo"? - I don't know because it boots fine and runs fast without video drivers, but it seems to be directly linked to the video card. So... I figure "okay maybe these nForce boards don't like ATI cards"... so I return the Radeon X700 and exchange for a BFG GeForce 6600GT. Yep, you guessed it, STILL the SAME problem!!!
I 'm pretty-sure the problem has got to be with the mobo but I can't be too sure. It doesn't seem too likely because the system boots and runs fine with basic Windows VGA drivers. Also, if I were to try and boot to VGA mode after encountering this problem, that would not work at all either, in any situation, other than after removing the ATI drivers or installing windows without them initially. Right NOW, as we speak, I tried uninstalling the nvidia drivers/software via safe mode, I ran disk check, etc... but the system will no longer boot in normal mode or VGA mode even without the nvidia drivers installed. I've formated the hard drive and am ready to reinstall again if I can find a solution to this problem.
If ANYONE can help me it would be EXTREMELY APPRECIATED! I'm not a dummy when it comes to computers but this is pure MADNESS!!! I couldn't even BEGIN to fit everything else I tried into this forum. I had to sum-it-up, but I will gladly answer any questions from you 'brains' out there and will monitor this site daily. I won't ask the question and disappear never to tell of the solution I may or may not find...
Thanks in advance,
Eilios

Quote from: EdwinGF on 26-October-05, 16:01:40
Hi,
If you only have one Serial ATA Hard Disk, then you don't need the nVidia RAID Driver. This driver is only needed when you set up a Serial ATA RAID Array or a Parallel ATA RAID array. For this you must have two identical hard drives in your PC, for RAID 0 and RAID 1 arrays.
nVidia SATA RAID drivers supports RAID 0, RAID 1, RAID 0+1, and JBOD. When you install at least two Hard Drives, prepare your mainboard to use SATA RAID and
set up the RAID Array style you want to use.
Then you will need to install the nVidia RAID driver, to allow Windows to "See" and use the drives correctly. This is done by pressing the F6 Key, inserting the nVidia RAID Driver disk , and "telling Windows" where to find the driver it needs, at the very beginig of the Windows XP setup process.
However if you install a RAID driver with just one SATA Hard drive, or two SATA hard drives, (this last scenario not set to be used in an array, but as two different use drives, lets say one for OS and one for MP3 Storage), then Windows begins to load, it will load the RAID driver, but since there's no RAID Array, Windows will keep "looking" for an inexistant RAID Array, and if there's no such RAID array, this will take forever.
That's why installing nVidia RAID Driver may hang your system (which as you saw is not really hung), at the Windows Splash Screen, it is just trying to find something that doesn't exitst.
NOTE: nVidia RAID Controller, supports RAID Arrays into both, the Serial ATA channels and the Parallel ATA (IDE) channels too. But for both options, you always need to have at least two identical hard drives installed to build up and use a RAID Array, which can only be seen by the nVidia RAID Driver, for both Serial ATA hard drives and Parallel ATA (IDE) hard drives.
NOTE: JBOD stands for Just a Bunch Of Disks = In this scenario, you can combine hard drives of different brands and/or capacities into one big drive that will be seen by Windows as one drive only.
NOTE: Even if you don't have any RAID array, you must install the nVidia nForce 4 Drivers. You can just leave the nVIDIA SATA Driver check box empty.
Hope this helps
I did not have any RAID or SATA drive in my system, actually these were disabled in BIOS. I had the similar experience though. BTW, why NF4 chiset driver is very important to install if Windows XP drivers can get the job done? Look at my link in the previous post.

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

Can someone tell me how to update the video drivers on my laptop?

one of the games I play online claims my video drivers are out of date, how do I update them without a huge fight?

Someone could give you better and more exact information but you didn't include the model number of your computer. But I can give you a pretty generic answer. At the top of this webpage you should see Product Support. Click on Laptops and then select which model of Toshiba computer you own, ie Satellite, Tecra, etc. Finally type in the model number of your computer. Select the exact model number and click the red Go button to the right. Click the Downloads tab and look thru the different drivers for this computer. Make sure that the new video driver is newer and has a higher version number than your current video driver. If it does, click the Download button, click the Run button and let it do the installation. Afterwards, reboot the computer so that the latest drivers are fully installed. Try again with that game.

HP Vectra VL400 series video drivers

We are trying to install Solaris 2.7 on the HP Vectra VL 400 series Pentium III. We cannot get the video driver configured during installation. Please help!!! Where do we go to get the most current video graphics driver.

Hi:
Below is the link to the SATA AHCI drivers you need. 2nd download is for XP 32 bit.
You need to have the storage controller in the BIOS set to AHCI which is the default setting for your model, (or RAID if you intend to use 2 hard drives acting as one).
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21408&lang=eng&OSVersion=&DownloadTy...
You can install the exact driver you need at the F6 prompt using a USB FDD (only a USB FDD will work).
You use the Up/Down arrow keys to scroll to and select the driver you need from the list on your floppy.
The exact AHCI driver you need for the chipset in your PC should be the Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.
For RAID you need the Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller.
You can confirm the correct AHCI driver you need if you still have access to your W8 OS, by looking in the device manager, click to expand the IDE ATA/ATAPI Controllers section, and you will see the name of the SATA AHCI controller listed there.
Or you can slipstream all of the drivers into a copy of your XP installation disk by reading the info at the link below (Intel Section).
Then read the downloadable document to slipstream all of the drivers.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-e-g-Windows-8-and-Software/SATA-drivers-for-...

Solution - Boot Camp 2.1 Killing Video Drivers

I installed Boot Camp 2.1 earlier today in preparation for upgrading to Windows XP SP3. After it completed and rebooted, my video drivers were dead. I was using 4-bit color and the lowest resolution possible. I called Apple Support, and a fairly unfriendly woman told me "just because we make it doesn't mean we support it" and that I'd have to repartition (erase ALL my data) and reinstall Boot Camp + Windows from scratch. Wow talk about unhelpful!
I found a better solution.
In Windows, I went to Add/Remove Programs, and uninstalled the Boot Camp 2.1 Update. Then I re-ran Apple Software Update and tried again, this time using the 'Download File' option from one of the top menus. 2nd try worked and now everything is fine!

My problems have not been quite that severe, but my recent experience with Boot Camp 2.1 and SP3 has been pretty bad. First, my colors do not seem to be displaying properly, mostly with blues turning into red (i.e., links in Firefox). Then last night I got three blue screens while using MS office in XP(which also has color problems).
Remarkably, I do NOT have any of these problems in fusion, running off the same partition....
I read another thread which suggested upgrading the graphics drivers in XP, which I am going to try, but if you uninstall boot camp 2.1, won't you have problems with SP3? Aren't you supposed to install 2.1 before you do the SP3 upgrade?

Can you update Video Drivers from Nvidia?

Hello,
I have an iMac 27-inch, late 2012 model with a built in Nvidia GTX - 660M 512 MB video card. Is it possible to use the Nvidia driver update for this build in card or should I only use Apple's video driver update? I'm sure there have been updates from Nvidia, but I haven't had a Apple update for at lease six months. I'm not having any problems, but like to keep current on drivers.
Thanks,
Dennis

In OS X, Apple provides GPU driver updates with every OS X update, so you don't have to worry about the driver. If you have Windows installed with Boot Camp, then you can install the most recent NVIDIA driver from the NVIDIA site > http://www.nvidia.com
Note that GPU drivers don't come as individual drivers, but they come with OS X updates. For example, updates like 10.8.5 or Mavericks may come with updated drivers

Intel video drivers crash after update

Hi all,
I have S540 ultrabook and I use it with onelinkdock with external screen and laptop screen in extend mode.
After 8.1 upgrade on boot I receive the error message "Catalyst Control Center stop working", but everythings works fine.
After Lenovo upgrade (including video driver) I don't receive the message anymore, but using the docking with extend screen, I face frequent black screen on external monitor. After few minutes also the main one became black and I got the message "intel video drivers crash and reset".
Someone face the same issue?
Thanks for your help

I'm having the same issue as well, I'm currently at work so as of right now I can't try to restore mine, but the strange thing with mine is that I updated mine the day the iOS 4.0 came out and had no problems until last night. Now the music and video sections keep crashing after just a few seconds. Also all my Podcast are gone, the only things missing and I even re-downloaded them last night and they're still gone.

Diamond Video Drivers

Is there any Solaris video drivers for the Stealth III series cards? Or do I have to go with the (ugh!) XiGraphics X-Server to get support for the current Diamond boards?
Looking at the most recent HCL, it looks to me like to only Diamond boards supported by Solaris are legacy boards. Diamond lists the following as their current video boards, yet I see none of the on the HCL:
Viper II
Stealth III S540 Xtreme
Stealth III S540
SpeedStar A200
SpeedStar A90
FireGL 4
FireGL 3
Also, the only AGP Diamond cards supported are the Viper V770 and Fire GL 1000 Pro which appear to be considered legacy cards by Diamond.
Most of the Diamond boards on the HCL are not even available today. For example, I had a Stealth 3D/2000-Pro that bit the dust, and Diamond replaced it with a Stealth III S540. Any idea if ANY help is on the way for support of more recent Diamond video cards? Any other work-around suggestions?

CArds supported by Solaris are listed in the applicable HCL at
soldc.sun.com/support
Solaris 8, for which the media kit can be obtained for $75, has a little additional graphics support (for HCL see above).
Finally, third party drivers are available e.g. from www.xig.com or xfree86.org

Updating video drivers

I have a few questions about video drivers.
First off, is it best to have the newest video drivers available, or should you just update them when it's necessary?
Do the old drivers have to be uninstalled before upgrading to the newest drivers?
How do I go about doing that? It's been a while since I have messed with these things and I am a bit rusty.
I would appreciate any help on this matter.
Thanks
Mike

Quote
Originally posted by GlennVidia
Mike, don't make me come out there and kick your
I'll have one more reason to come out that way as Bonz got himself a little girlyfriend now and she lives in Cali. so he's moving back out in Feb 2004 so don't think I wont hunt you down
Bring it, tough guy!
Thanks for the answer bro. I am having a little glitch between missions on Delta Force: Task Force Dagger and I believe it is because of the 'no-cd' executable I added to the program folder. No big deal really, I was just wondering if I maybe needed to upgrade my video drivers, but since this game is older now and is made by "NoLogic" (Nova Logic) then it probably has nothing to do with my video drivers.
PS What part of CA is Bonz moving to?
Mike

Uninstall current video drivers

Similar Messages

Maybe you are looking for