Uninstall elements 3 and Album 2 after Elements 4 Install?

Can I safely uninstall Elements 3 and Photoshop Album 2 after successful Elements 4 install? (No photos lost, no problems with Elements 4 afterwards?) Thanks
operating system: winxp.

S Burns,
It has been reported on this board that uninstalling a version of elements will uninstall the Adobe Gamma utility concominantly. This is undesirable, and would necessitate a reinstallation should you desire this function for monitor calibration.
Unless one is pressed for disk space, I would retain both versions.
I don't know anything about a potential downside to deleting Album 2.
Ken

Similar Messages

Can I delete or uninstall CS3 and 5.5 after I've installed Creative Cloud for CS6?

Hi-
Does anyone know if I can delete or uninstall CS3 and 5.5 after I've installed Creative Cloud for CS6? Just wondering if I can save hard drive space.
Thanks.

Yes you can uninstall CS3 and CS5.5.
You can also do this before installing CS6 too.

Can I UNINSTALL the OLD VERSION of FIREFOX after I have installed the NEW ONE?

''locking - duplicate - https://support.mozilla.com/en-US/questions/862779''
Can I UNINSTALL the OLD VERSION of FIREFOX after I have installed the NEW ONE?

Download latest Firefox version:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/all.html
Uninstalling Firefox
* https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
* DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
Installing Firefox on Windows (use the Downloaded latest Firefox installer)
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working.

All bought titles and albums gone after upgrading I Tunes

Hi Guys,
unfortunately all my recently bought titles and albums from the I Tunes store are gone after upgrading to 10.7.0.21
Can somebody please help me?
Thanks you very much...
Best regards - Greg

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Stereo tunes only play one channel and Internet hangs after 4.21 Install

My daughter recently updated her 2nd Gen iTouch to 4.21 which I assume is an operating system. On stereo tunes, now only one of the stereo sound channels plays (right side). On older monaural songs, both right and left earphones produce sound. Also, Internet hangs now after initial home page load. How do I either roll back to an older version of the OS or get fixes for 4.21?

http://www.thehangtime.com/gb/gbfaq2.html#leftspeakeronly

USB Keboard and Mouse frozen after 10.6 install

After 2 aborted installs (sinning wheel) on a brand new (1 day old) iMac I got Snow Leapard to install. Except the new Apple keyboard and mouse (both USB) were frozen. Tried other USB keyboard and mice and they don't work either. Tried pairing a Bluetooth mouse and it did work. Am I missing a setting somewhere. I want to use the new USB devices rather than buying bluetooth devices.
Help please?
Thank you.

I have a similar problem. After the 10.6 upgrade my keyboard and sometimes my mouse stop responding. Unplugging them and plugging them back fixes the problem (temporarily). I haven't checked any other USB devices (printer) to see if they're affected, but here's the really strange part: I had to downgrade back to 10.5.8 due to some other compatibility issues (via the restore from Time Machine option, so 10.6 was completely wiped from the system), but I still have the problem with the USB mouse and keyboard. The system is a Mac Pro 2.66 dual core Xeon (dual processor), the keyboard is the standard Apple keyboard, and the mouse is a Microsoft Intellimouse. I didn't have any problems with this set up from the time I got it until I tried the 10.6 upgrade.
I've tried all of the obvious solutions (completely powering off the system, disconnecting USB devices, etc) but I still have the problem.

I am planning to to a clean install of Mavericks on my MacBook Air 11" mid 2012. Will i lose out on the free apps like iPhoto and iMovie etc after the clean install? Has anyone done it yet?

I had not upgraded to the free 10.8 update.

Welcome to Apple Support Communities
If you do a clean installation, you will lose all iLife apps (iPhoto, iMovie and GarageBand) because they are not included in OS X. However, after reinstalling OS X, you will be able to reinstall them for free from the Mac App Store. Open the Mac App Store, go to Purchases and download the iLife applications. Note that the latest version is only compatible with OS X Mavericks.
Also, make a backup of your files with Time Machine before upgrading and check that your apps are supported > http://www.roaringapps.com

Help with iTunes database and Time Machine after Lion clean install

I did a clean install of OS X Lion and think I've given myself problems with my Snow Leopard Time Machine backup and with my iTunes Library database files.
My iMac (2007) had become very sluggish so I opted for a clean install. Before the install of Lion my Snow Leopard 10.6.8 internal 1TB HD was at about 600GBs. I was using Time Machine to backup to an external 1TB drive. I had my iTunes 10.? library on the same drive.
For the Lion install I partitioned my internal 1TB HD into two partitions - a 250GB Lion boot partition and the rest for Lion data files.
Now I have two problems - 1. I can't work out how to re-connect my Time Machine backups, since they were related to a much bigger original drive, and 2. I can't seem to find my iTunes database files.
I also don't want to restore any application files at this stage, as I'm determined to do a fresh install of only the applications I need as I go along, and hopefully avoid the issues of sluggishness I had with Snow Leopard.
I have all my iTunes files in their pre-Lion external HD folder, but that folder does not seem to have the iTunes Library.XML or iTunes Library files. I didn't delete them so I'm hoping they were in my iTunes folder on my SL boot drive. But that drive was deleted during the install, so I'll be depending on Time Machine to restore the database.
Can anyone suggest a way to deal with Time Machine for my Lion install, and a way to restore my iTunes database? I'd like to keep as much of the Snow Leopard Time Machine data as I can, while continuing to do Time Machine backups from my Lion installation.
Anyone know where iTunes stores those database files, if not in the external drive iTunes folder? Spotlight search doesn't find the files, but is there a way to search my old Time Machine backups without having the Time Machine backups folder re-connected in Lion?
Thanks.

My iTunes folder is organised like this if it helps:
And iTunes uses them from the Prefrences like this:
Regards,
Colin R.

Fire fox won't allow 420p and full screen after 10.6 install

I can do this with safari but I prefer fire fox prior to the install of 10.6 I had no issue with fire fox and hulu

A reinstall of Firefox seemed to fix the issues (odd for Mac as reinstall is usually a PC fix)

[SOLVED] systemd services load slow/fail after forcing package install

This is more of a PSA for those coming across this issue in the future. I think people should do more of these.
I recently had problems installing packages where pacman told me several files already existed in the filesystem. This happened when I tried to install an individual official package, not a full system upgrade, so I couldn't find any relevant posts.
I tried to --force install the package, thereby rewriting all such files. But I noticed the next time I rebooted and logged into my system, my Cinnamon session would load extremely slowly (~2 mins) and I had several failed services.
Symptoms of the problem included:
- non-root partitions not mounted on boot
- users and groups added after initial system install were gone (including sudo)
- difficulty connecting to networks
- trying to start/restart services resulted in a Polkit-related error and a timeout
So after a while I found this post: https://bbs.archlinux.org/viewtopic.php?id=151915
It suggested that the polkit-related user and group were missing and I should check my /var/log/pacman.log around the time of my force installation, which I did. This revealed pacman overwrote several files in /etc including fstab, hosts, passwd, shadow and group.
Luckily pacman backed up all those files under the suffix *.pacorig so I by renaming the backups and rebooting I was thankfully able to return my system to normal.

I have another example of rc.local which is mainly about configuring power saving etc etc on a netbook
hdparm -B254 /dev/sda
grep -q '0' /sys/class/power_supply/ADP1/online && P="powersave" || P="ondemand"
cpupower -c all frequency-set -g "$P"
echo 1500 > /proc/sys/vm/dirty_writeback_centisecs
/usr/sbin/iw dev wlan0 set power_save on
echo '0' > '/proc/sys/kernel/nmi_watchdog'
echo '1' > '/sys/module/snd_hda_intel/parameters/power_save'
echo 'auto' > '/sys/bus/pci/devices/0000:00:00.0/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:02.0/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1c.0/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1b.0/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1d.0/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1d.1/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1d.2/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1d.3/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1d.7/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1f.2/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1f.3/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:01:00.0/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:02:00.0/power/control'
echo 'auto' > '/sys/bus/pci/devices/0000:00:1c.1/power/control'
/usr/sbin/ethtool -s eth0 wol d
what is the systemd way of doing this sort of thing?
Also where should local units be put so that they can be enabled/disabled etc. If I put them in /usr/lib/systemd/system won't they interfere with pacman?

Are there instructions to uninstall Elements 7 and Elements 10

Hello,
Could somebody please help me? I purchased a new laptop and I have to return it because it's been giving me a lot of problems. I have to uninstall Elements 7 and Elements 10 before I return it.
Are there specific instructions and links to uninstall these 2 programs?
Or, can I just use the Windows uninstall programs to completely uninstall them?
Thanks for your assistance!

Barbara B. wrote:
Oh, you don't go to regular support for activation. If you're in the US, you just call this number:
Software activation
866-772-3623
Available 24/7
Good morning, Barbara.
Oh I see, I didn't know that. I called the regular 1-800-585-0774 number. I had to wait for 18 mins to get a regular person, which then put me on hold for another long time, then she transferred me - and the line just kept on ringing and ringing. All in all, I waited for 1 hour and 5 minutes, until I went to chat with the Adobe lady - even while I was chatting with her the phone just kept on ringing. So, no, I'm not impressed with the kind of phone support they gave me.
Thanks for the number. After your last message I decided to just uninstall the thing. Then I uninstalled a couple of other things and ran a System Restore. The laptop is all packed and ready to go, I'll be going to the post office to mail it back to QVC in a little while.
Thanks for your assistance. Have a great weekend.

Photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1

photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1
can someone help me with this issue?

Two suggestions: the first one is a workaround. You just have to drill down your program file tree to Adobe Photoshop Elements Organizer and find the .exe file - the one specifically for Organizer, not Elements. Make a shortcut to that file on your desktop and it will open Organizer. The second suggestion resolved the problem altogether for me. I actually called Dell and after working with several different techs over several different days, I talked to a tech in premium support who was excellent. I discovered from them that it is actually a problem with the windows system files. I have 8.1. I went through a "refresh" on my computer which rebuilt all the files. Then reinstalled Adobe as well as my other programs again and Photoshop Elements Organizer works from the standard desktop shortcut.

Should I uninstall Elements 11 after installing Elements 12?

Should I uninstall Elements 11 after installing Elements 12?

You don't have to and if you use any of the features removed in v12 (http://forums.adobe.com/thread/1302663?tstart=0) you might want to keep it.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Can I safely uninstall Elements 10 after upgrading to Elements 12

Hi everyone,
Can I safely uninstall Elements 10 after I've upgraded to Elements 12? There's nothing in the library anymore and I backup everything to an external HD.
Thanks!

Hi there,
              There will not be any issue with the uninstallation of Photoshop Elements 10 [ PSE10 ] after you have upgraded [ installed Photoshop Elements 12 ].
              Before you uninstall the PSE10, please make sure that you have the serial number of it. [ Find your serial number at ( Find your serial number quickly ) ].
              If you do not have the installation media, if it's a CD, you can download PSE10 again from [ Other downloads ].

Because I listened to Adobe earlier today about whither uninstalling Elements would affect Photoshop and Lightroom on my computer, Lightroom no longer sees Photoshop in the EDIT IN Menu of Lightroom. I found an article on the help site saying to delete th

Because I listened to Adobe earlier today about whither uninstalling Elements would affect Photoshop and Lightroom on my computer, Lightroom no longer sees Photoshop in the EDIT IN Menu of Lightroom. I found an article on the help site saying to delete the filecom.adobe.Photoshop.plist, which I looked for, its not there so it can't be deleted. The next step is to uninstall Photoshop and reinstall. This isn't an option because of all the plug-ins and modifications of the work space. Does any one have a better solution?

<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>

Uninstall elements 3 and Album 2 after Elements 4 Install?

Similar Messages

Maybe you are looking for