Uninstall Elements 6 failed because of javascript error

I recently upgraded to Mac OS X Mountain Lion and was informed that I needed to uninstall and reinstall Photoshop Elements 6. The Setup application could not be opened, however, because of Javascript errors (according to the error message). I couldn't find an uninstall item for Elements 6 anywhere on my hard drive. (My iMac is a late 2009 model.) How should I proceed?

The uninstaller is the installer. Find your original installation media and start like you're going to install PSE. When you come to the screen where you formerly chose Install Components, choose Remove Components.
However, do you remember if you had PSE set to run in Rosetta? If you didn't turn that off before upgrading you have a different set of issues to work through.

Similar Messages

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Adobe Lens Profile Creator - ERROR (Detect corners failed because file reading errors ocurred)

1) I have successfully created a lens profile for a Nikon AF Micro Nikkor 40mm 2.8 lens used in a Nikon D5200 Camera. For this I converted the raw .nef files to .DNG first using Adobe's DNG Converter.
2) When trying to create another lens profile using the EXACT SAME .DNG files as posted in 1), I am no longer able to create a lens profile because of the message "Detect corners failed because file reading errors ocurred". I am also unable to create any other lens profile using different photos.
3) I have also tried using a fresh install of Adobe Lens Profile Creator in another mac and I get the exact same error.
4) I AM ABLE to create a lens profile if I use .jpg files (generated from the same raw .nef files as mentioned) but this doesn't help because then the profiles don't show up when trying to open a raw file in Adobe Camera Raw.
Please help as this is exasperating.
Thank you.

Thanks! I had the same error message in Adobe Lens Profile Creator 1.0.4 for OSX and I found the problem to be the letter ö in the folder name for the DNGs. The lens is an old ISCO-Göttingen and the progress stopped at 2% with the mentioned error message. Changed the folder name and now it works!

Reconnect policy with MySQL failing because of autoCommit error

This related to this issue, but I didn't see any responses to it: Reconnecting a dead connection from a UnitOfWork commit - Autocommit error
I'm testing with MySQL 4.1 and I have a reconnect policy that does the following (I believe this is a pretty standard approach):
session.setExceptionHandler( new ExceptionHandler() {
public Object handleException(RuntimeException exception) {
if (exception instanceof DatabaseException) {
dbex.getAccessor().reestablishConnection(dbex.getSession());
However, when it reestablishes the connection (and I have traced this and can verify that this code is executing and a reconnect is performed), I get the following error for any updates:
Internal Exception: java.sql.SQLException: Can't call rollback when autocommit=trueError Code: 0
at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:277)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicRollbackTransaction(DatabaseAccessor.java:1090)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.rollbackTransaction(DatasourceAccessor.java:486)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.rollbackTransaction(DatabaseAccessor.java:1075)
at oracle.toplink.publicinterface.Session.basicRollbackTransaction(Session.java:377)
I only have this problem with the MySQL JDBC drivers. I can continue to read normally, but I can't perform any transactions.
This isn't so much of a question about MySQL specifically, but rather a question about how reestablishConnection() connects to the database differently from my initial login using DatabaseLogin. Obviously, I don't have this error connecting normally. I only get it after a reconnect is applied.
Specific questions are: Is there another handler I can add to ensure JDBC Connections returned by ServerSession are always setAutoCommit(false)? Am I reestablishing the JDBC connections incorrectly?
Nate

Nate,
This does appear to be MySQL JDBC specific but is most likely related to a general issue.
When the connection drops and you receive the notification through the exception handler I would typically recommend looking at the session in us (isUnitOfWork) or the query type (isWriteObjectQuery) to see if the operation that failed was involved in a transaction (UnitOfWork commit).
In these transaction cases you need to do more then just re-connect and retry. You need to ensure after reconnection that an application exception is raised so the UnitOfWork operation(s) can be retried completely. I would simply add to this case to ensure that the JDBC connection is put back in a state where it can be managed properly.
There is no special operation or any case I know of where any special auto-commit needs to be set on a connection after it has dropped and before it is re-connected.
Doug

Urgent! Upload role failed because of connector error.

Hi!
I try to upload roles from an R3 system. However, it failed
with an error "connection failed".
The connection is checked but I dont see anything wrong.
I guess it is a problem in the permission on the R/3 system.
Please help .Points guaranteed. Thx!

Hi jennifer,
              See this tread its helpful for u.
              Connection to SAP component system failed.Check the system settings.
   Regards,
Senthil kumar.K

HtmlUnit test getting failed due to javascript error

Hi,
Versions used:
htmlunit : 1.11
oc4j : 10.1.3.2
When I click a anchor element which opens a pop up window in the browser give me following javascript exception from DebugCommon10_1_3_2_0.js when I click the anchor through a htmlunit test. I have set my WebClient to default.
Exception class=[org.mozilla.javascript.WrappedException]
com.gargoylesoftware.htmlunit.ScriptException: Wrapped com.gargoylesoftware.htmlunit.ScriptException: TypeError: Cannot find function setCapture. (http://192.168.20.36:8988/CS/adf/jsLibs/DebugCommon10_1_3_2_0.js#3614) (http://192.168.20.36:8988/CS/adf/jsLibs/DebugCommon10_1_3_2_0.js#4561)
     at com.gargoylesoftware.htmlunit.javascript.JavaScriptEngine.callFunction(JavaScriptEngine.java:322)
     at com.gargoylesoftware.htmlunit.html.HtmlPage.executeJavaScriptFunctionIfPossible(HtmlPage.java:736)
     at com.gargoylesoftware.htmlunit.html.HtmlPage.runEventHandler(HtmlPage.java:1489)
     at com.gargoylesoftware.htmlunit.html.HtmlPage.runEventHandler(HtmlPage.java:1465)
     at com.gargoylesoftware.htmlunit.html.ClickableElement.click(ClickableElement.java:103)
     at lk.informatics.cs.testcases.login.agreementmanagement.AddNewPartner.testSLNO12(AddNewPartner.java:329)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Caused by: org.mozilla.javascript.WrappedException: Wrapped com.gargoylesoftware.htmlunit.ScriptException: TypeError: Cannot find function setCapture. (http://192.168.20.36:8988/CS/adf/jsLibs/DebugCommon10_1_3_2_0.js#3614) (http://192.168.20.36:8988/CS/adf/jsLibs/DebugCommon10_1_3_2_0.js#4561)
     at org.mozilla.javascript.Context.throwAsScriptRuntimeEx(Context.java:1693)
     at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
     at org.mozilla.javascript.FunctionObject.call(FunctionObject.java:471)
     at org.mozilla.javascript.Interpreter.interpretLoop(Interpreter.java:3085)
     at org.mozilla.javascript.Interpreter.interpret(Interpreter.java:2251)
     at org.mozilla.javascript.InterpretedFunction.call(InterpretedFunction.java:161)
     at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:340)
     at com.gargoylesoftware.htmlunit.javascript.HtmlUnitContextFactory.doTopCall(HtmlUnitContextFactory.java:151)
     at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:2758)
     at org.mozilla.javascript.InterpretedFunction.call(InterpretedFunction.java:159)
     at com.gargoylesoftware.htmlunit.javascript.host.EventHandler.call(EventHandler.java:95)
     at com.gargoylesoftware.htmlunit.javascript.JavaScriptEngine.callFunction(JavaScriptEngine.java:363)
     at com.gargoylesoftware.htmlunit.javascript.JavaScriptEngine.callFunction(JavaScriptEngine.java:318)

The solution is,
Earlier I used:
HtmlPage popPage = (HtmlPage) page.getFirstAnchorByText("PopMe").click();
which gave me the javascript exception. But I changed it to
HtmlPage popPage = (HtmlPage) page.getFirstAnchorByText("PopMe").openLinkInNewWindow();
and now it's ok.

JavaScript error on WD

Hi Friends,
the same issue, opening again.
I am getting JavaScript error on WebDynpro aplication.
The error is "Object Required on line number .."
because of this, when I run the aplication on browser IE6.0 build 2900.2180, SP2, the application manages to display all the popup windows through link to action provided.
BUT in case of IE 6.0 build 2800.1106, SP1, not able to see the the popup windows because of JavaScript error.
There should be some way, because in other screens too, I have popup windows, but am able to se popup using same old IE 6.0 version.
Is there any clue how to get rid of it?

Hi Friends,
I resolved it.
This bug was because of one textView field value missing.
I feel, in this case too, we should not get javaScript error, as its not possible to handle it.

Lost itunes on pc after an update. Message said iTunes not installed.. Please reinstall. Tried to and error message "app failed because MSVCR80,dll was not found. Tried several times...same response. Finally uninstalled itunes and tried to reinstall . No

Lost iTunes on pc after an update (Neighbor has same problem) Tried to open and message said " iTunes not installed correctly,Please reinstall itunes" . Tried to do so and same message with another message"application failed because MSVCR890.dll was not found.Re-installing may fix this problem" Tried several times and same message. Finally uninstalled itunes from computer and tried unsucessfully several times to re-install...Same messages as above appear when install looks like it's done......Help !

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error o

When I was Importing data from XML to SqlServer using SSIS , I am getting this error. The import is working if i use small file and not working if I use large XMl file. Can any one of you guys help me out with the issue?
Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC02092AF at Data Flow Task, XML Source [24515]: The component "XML Source" (24515) was unable to process the XML data. Pipeline component has returned HRESULT error code 0xC020902A from a method call.
Error: 0xC0047038 at Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "XML Source" (24515) returned error code 0xC02092AF. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread4" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

The reason is in the first line of the error. It doesn't have anything to do with the size of your XML file - it has to do with the contents of the "MsgLev1" column. You (or the XSD) has indicated that the values in this column not exceed a certain size - but one of the values in the file that's failing is larger than that.
In order to fix the problem, you're going to need to increase the allocated space for that column. In order to do that, you're going to need to find out what the required size of that data is - either from someone who ought to know, or by direct examination of the file. If you want to know which entity has this overly large data element in it, you need to configure the error handling of the XML Source to "redirect truncation errors". Then you can hook up the XML Source's error output to another destination where you can see which rows are problematic.
Talk to me on

I am trying to uninstall Adobe Photoshop Elements 10 and receive a 1316 error.

I am trying to uninstall Adobe Photoshop Elements 10 and receive a 1316 error. The account already exists. What? I purchased and installed Adobe Photoshop Elements 13 and want to remove the older version. Nothing works.

Downloaded the trail versions and installed. Had to do the trial versions because I no longer have the serial numbers. Once I reinstalled, I was able to uninstall with no problems.

Desktop create fails with javascript error (unable to proceed)

When creating a new desktop from a portal template the action fails and the only error I can find is a javascript error.
The error in the browser when trying to create a new desktop from the portal.
<b>Error: unterminated string literal</b>
Source File: http://localhost:7001/FoundationAppAdmin/portal.portal
Line: 2710, Column: 28
Source Code:
ror(s) occurred during XmlDisassemblerContext parsing: Parser Error...
That corresponds to this code in the web page source in the portal admin tool.
function showUserErrorMessages() {
alert(unEscapeChars("- Error: The desktop could not be disassembled. [com.bea.netuix.application.transform.disassembler.XmlDisassemblerException: com.bea.netuix.application.transform.disassembler.XmlDisassemblerException: One or more validation error(s) occurred during XmlDisassemblerContext parsing: Parser Error...
org.xml.sax.SAXParseException: cvc-complex-type.3.2.2: Attribute 'columns' is not allowed to appear in element 'netuix:layout'.
Parser Error...
org.xml.sax.SAXParseException: cvc-complex-type.3.2.2: Attribute 'columns' is not allowed to appear in element 'netuix:layout'.
Parser Error...
org.xml.sax.SAXParseException: Duplicate unique value [ID Value: bEarn] declared for identity constraint of element "desktop".
Parser Error...
org.xml.sax.SAXParseException: cvc-complex-type.3.2.2: Attribute 'columns' is not allowed to appear in element 'netuix:layout'.
Parser Error...
org.xml.sax.SAXParseException: cvc-complex-type.3.2.2: Attribute 'columns' is not allowed to appear in element 'netuix:layout'.
Message was edited by:
dallastx

When creating the desktop from a .portal file in the admin tools, the .portal file is parsed and validated before persisting to the database. It looks like this is failing and you are getting some fairly straight-forward messages. Check the format of the contents in the .portal file and make the necessary corrections.

I got an error message while burning a cd in itunes - "The attempt to burn a disc failed. The burn failed because of a medium write error. What is that and how can i fix it?t

I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?

The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

Processing this item failed because of a PDF parser error. Input string was not in a correct format.

Good Morning,
We're having issues parsing several hundred PDF files located in two separate Record Center sites. All other PDF documents in the environment are being crawled and parsed without issue. I've verified the permissions for the Search service account, but that
doesn't seem to be the issue. Searching for this particular error hasn't returned much, but I have ensured that the Search service account has been added to the necessary Local Security Policy objects and cleared the configuration cache. Any help would be
greatly appreciated.
Processing this item failed because of a PDF parser error. ( Error parsing document 'https://asdf.com/sites/HRRecords/asdf.pdf'. Input string was not in a correct format.; ; SearchID = 6642FEEF-6921-434E-B084-02809173D8A7 )

This issue came back up for me as my results aren't displaying since this data is not part of the search index.
Curious if anyone knows of a way to increase the parser server memory in SharePoint 2013 search?
http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip'. Document failed to be processed. It probably crashed the
server.; ; SearchID = 097AE4B0-9EB0-4AEC-AECE-AEFA631D4AA6 )
http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The
function encountered an unknown error.; ; SearchID = 4A0C99B1-CF44-4C8B-A6FF-E42309F97B72 )

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

SharePoint 2013 Search - Zip - Parser server ran out of memory - Processing this item failed because of a IFilter parser error

Moving content databases from 2010 to 2013 August CU. Have 7 databases attached and ready to go, all the content is crawled successfully except zip files. Getting errors such as
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/file1.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The function encountered an unknown error.; ; SearchID = 7A541F21-1CD3-4300-A95C-7E2A67B2563C
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/file2.zip'. Document failed to be processed. It probably crashed the server.; ; SearchID = 91B5D685-1C1A-4C43-9505-DA5414E40169 )
SharePoint 2013 in a single instance out-of-the-box. Didn't install custom iFilters as 2013 supports zip. No other extensions have this issue. Range in file size from 60-90MB per zip. They contain mp3 files. I can download and unzip the file as needed.
Should I care that the index isn't being populated with these items since they contain no metadata? I am thinking I should just omit these from the crawl.

This issue came back up for me as my results aren't displaying since this data is not part of the search index.
Curious if anyone knows of a way to increase the parser server memory in SharePoint 2013 search?
http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip'. Document failed to be processed. It probably crashed the
server.; ; SearchID = 097AE4B0-9EB0-4AEC-AECE-AEFA631D4AA6 )
http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The
function encountered an unknown error.; ; SearchID = 4A0C99B1-CF44-4C8B-A6FF-E42309F97B72 )

Uninstall Elements 6 failed because of javascript error

Similar Messages

Maybe you are looking for