Uninstall issues help...
I am trying to uninstall developer workplace and I am coming across an issue where it won't let me continue. Once I enter my SAP System ID to uninstall, I get the message: "SAP system GMZ is based on AS Java. Cannot remove it."
Are there any ideas how to get past this?
Thanks in advance.
Hi:
Presumably you did not uninstall the old system with Sapinst, please the content under usr/sap.
Regards
Derek
Similar Messages
-
I downloaded iBooks but it is stuck in Loading and I can't seem to Uninstall. Help!
I downloaded iBooks but it is stuck in Loading and I can't seem to Uninstall. Help!
Try restarting your iPad : press and hold the Sleep/Wake button until a red slider appears, then drag the slider; then press and hold the Sleep/Wake button until the Apple logo appears. If the app download doesn't re-start, then you couldtry downloading the app to your computer and then syncing/copying it across to your iPad.
-
Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!
You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G. -
Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!
I am not sure, I have full signal on my iphone 5 and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done
-
I have tried multiple times to install CC and muse only getting blank creative cloud screen (no error and in serious pain in the butt to uninstall) PLEASE HELP!!!!!!
Geekysmooth please try the steps listed in Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html to resolve the current error which you are experiencing.
-
I have tried uninstalling mackeeper helper on my computer but it has not been removed. The mackeeper icon is on my tool bar at top of computer as well as still in applications. Please help!!
Drag MacKeeper from Applications to the Trash.
After that, follow this method to see if there are still traces of MacKeeper on the system:
Uninstalled MacKeeper? -
My granddaughter installed a new IPOD Nano on my HP Pavilion 552w about 2 weeks ago. Initial installation went OK and she downloaded tunes. Since the installation, my PC has stalled at shutdown. So...I tried to uninstall and reinstall the Nano. Upon "uninstall" the installation wizard locked up and gave me a message indicating there was a "missing file" and could not be uninstalled. Next, I tried to utilize the disk for a reinstall/uninstall and, again, I received the message that there was a missing file and could not be installed/uninstalled. So, we went online and tried to download a more current updater. Again, after 4 hours of downloading, the message came up again that there was a file missing and the download was incomplete.
I've spent about 40 hours the last week trying to correct the problem, but I haven't tried "Disk Mode" or "reset." I'm not sure either would address my problem. I checked the troubleshooting info at the Apple site, but didn't see anything addressing my issue. I'm new to Apple and don't have a clue what to do. Where do I go next?
I've tried everything I could think of with no results. Any of you Apple users have a suggestion? I'm ready to shoot my PC and myself. Help!
Thanks...Crissy's Gran
HP Pavilion 552w Windows XPhi Mazie!
Since completion of the reinstall and upgrade, Quick Time icon is missing from the desktop and iTunes gives error message, "iTunes cannot run because some of its required files are missing. Please reinstall iTunes."
gaaah. another one of these. i think we've got something more than a missing file issue going on here.
it sounds like the QT part of your itunes install hasn't been going through properly. but if it was just the program files that were missing or broken, we would expect you to be getting an "itunes has encountered an error ..." message. the "some of its required files ..." message actually usually indicates something odd has happened in the registry. (for example, people can get this if they system restore over top of a fresh itunes install and strip out the installation registry entries.)
i've been seeing a few cases of this hitting people overnight, too. so i'm getting worried that this might be a symptom in some cases of a malware problem.
first, let's quickly check for evidence that you might have a W32.Pinfi infection. (that can attack QT, and cause varied and mysterious problems during an itunes install.)
have a look in your temp directory again. is there a 7-character name file there with a .tmp extension?
the first three characters can be any letter. the last four characters can be any number, or the letters A through F.
love, b -
Need help How can we do this we didnt have an issue till we did the newest update 11.1.4 ?
many thanks.
Microsoft visual c ++ library runtime error by the application iTunes and it tells you to reinstall I tunes and here we are didn't fix
With that one, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Officejet Pro 8600 Plus connection issue - HELP!
I have a strange issue: after some hours, the communication link is dropped between the computer and printer. When this happens, IE becomes unusable and will not connect to anything. This is replicated on three XP home machines. The fourth, a vista ultimate machine, does not seem to be affected (yet). I get the "scan to computer is disabled" error. It cannot be re-enabled. At this point I cannot print either. I can reach the embedded web server on the printer via firefox and can still surf using firefox. I can ping the printer, but again once the connection is dropped, no printing or scanning to the computer. The only thing I've found that resolves the issue (temporarily) is to reboot the computer, which just starts the cycle again.
last night I installed the software on an XP machine and the laptop to test when the connection dropped. They lasted from 7pm Monday until I got home at 5pm Tues. The machines were not used. Once I started using them (firefox only), then they dropped the connection within a half hour of each other around 7pm. The other XP machine lasted from 7pm Mon until 7am tues, when my wife started using it and then noticed it dropped sometime that tues between 7 and 9AM. An 11am tues reboot ran OK until 10 pm tues when connection was lost again (and IE is now dead). The Vista machine has been running since 7pm monday until now (930pm tues) and still seems to be holding.
printer hardwired, to router, static IP, 100-full link speed (also tried 10-half)
router dlink di-655
two XP machines are hardwired, vista is hardwired, and last xp machine is a laptop on wireless.
I've swapped cables rebooted and reinstalled multiple times. I must have a file a mile long on the support phone line. They were unable to fix it. I asked this to be escalated, but who knows when I'll get a response.
I've toggled firewalls - XP built in
I've uninstalled anti virus software
I've even put up with crazy suggestions from tech support like changing the router channel (uhh, it is wired!)
one xp machine had an AIO 4215 hooked via USB and the others printed to it via network, but the printer has been deleted from the networked machines.
I can ping 127.0.0.1 which is supposed to indicate the tcp service is OK.
I have not reset winsock .. I can see one machine being bad, but three????
malware / virus scan shows no issues. Again one maybe, but three??
The only thing I can think of is that there is something in the XP networking stack that conflicts with the new 8600 software as hours pass. Perhaps there is some polling operation that goes on then dies after some time, then it kills IE as it dies.
When the printer works it is great, but rebooting is not a permanent solution to this.
any suggestions would be greatly appreciated!!!!!! I am stumped and so is tech support. They are sending it to engineering, but who knows when they will respond.
thanks in advance.
This question was solved.
View Solution.well it looks like I have a working solution ... I downloaded a freeware file called process.exe . I made a cmd file via notepad with the following contents:
rem this is to keep the HP network printer communicating with the desktops
rem
process -k "hpnetworkcommunicator.exe"
rem
process -k "scantopcactivationapp.exe"
rem
"C:\Program Files\HP\HP Officejet Pro 8600\Bin\HPNetworkcommunicator.exe"
rem
Start "" "C:\Program Files\HP\HP Officejet Pro 8600\Bin\ScanToPCActivationApp.exe" -deviceID CNXXXX:NW -scfn "HP Officejet Pro 8600 (Network)"
the XXXX is your printer serial number with an extra character or two. Pull that number from the port tab after you pull up "properties" for the 8600 printer.
This cmd file basically restarts the printer link. It opens a command window that launches the program to re-establish the link.. then it closes the command window. The launched program shows that the communication link is dead (just for a few seconds), but then it makes the connection... THEN you hit the close button and coninue your work until it dies again.
I may have it autorun every X hours if I can narrow down a good time. Until then I have a shortcut on the desktop to "FIX HP LINK" ... I only had to do this for my XP machines, as the vista one seemed OK.
What ticks me off is that I shouldn't have to do all of this diagnosis. It would be nice if there is a fix in the pipeline so the link stays stable al the time. I've spent hours trying to figure this crap out.
Anyhow, I hope the time I spent helps someone. PS, thanks to the OJ6500 thread that had the info for the scantopcactivationapp.exe program.
PS ... I'm still waiting for an engineer to contact me, if any HP employees are reading this.
PSS I haven't tried this without killing and restarting the hpnetworkcommunicator stuff, but it works for now. -
Ipod Touch: My Issues, help needed as fast as possible
Well recently i got an Ipod Touch 2nd Generation for christmas, and i must say i love it. But i have got some serious problems. 1) all applications that were not standard on the itouch crash unexpectedly and the only way to rectify this issue is to download something from the app store and they work again :S. Yes that is as bizarre as it sounds. Sometimes it will work fine and i can use any of my apps whenever i like. But frequently(more frequently as time goes on) the applications dont open, i touch them they open the background for the app and they take me back to the main screen. I have tried the following: reseting the iPod, restoring it to factory settings, uninstalling apps and then re-installing and this issue is resolute. I also happen to know that some other 2nd Generation Touch owners at my school have the very same issue. I have seen some threads dotted about explaining their issues that are similar to this, meaning its fairly widespread.
My second issue is really bugging me, i opened the itunes store for the first time on my iPod(i never get any of my music from itunes normally i detest the application.) and all of a sudden it downloaded a podcast without me telling it to. It was called Podhead: The DoorWhores Off to vegas. This is something i really do not wish to have on my iPod. So i synced it to my windows OS and tried to re-sync the iPod's podcasts with my library so that it would dissappear. But it didn't, i then tried setting it to manually putting files on my ipod and alas it doesnt show up in the podcasts sub section of the device. I tried playing the podcast and it takes me to the home screen of my ipod with the Play triangle flickering constantly in the top right of my ipod. I don't know what is going on with that but i havnt restored it to factory settings after this issue, mainly because my iPod refuses to accept that i own all of the apps i have backed up and i have no desire to manually re-download them to my ipod.
3) That last scentence brings me nicely onto my final problem which is this: my computer tells me that i do not have the authority to put onto my ipod. Despite all of them being free and despite all of them having being backed up from my ipod.
Any help with these issues would be much appreciated. I am in desperate need of assistance before i come to the end of my tether and resign myself to a long trip to the nearest apple store. thanks in advanceSanga wrote:
1) all applications that were not standard on the itouch crash unexpectedly and the only way to rectify this issue is to download something from the app store and they work again
Did you try to restore your iPod to factory settings and add your apps one by one to find out which app causes the crash? Try not to restore from a backup it may contain the corrupt parts you don't want to install again.
3) That last scentence brings me nicely onto my final problem which is this: my computer tells me that i do not have the authority to put onto my ipod. Despite all of them being free and despite all of them having being backed up from my ipod.
Deauthorize and authorize your computer in iTunes, here's how to:
http://support.apple.com/kb/HT1420 -
Two desktops version that don't work and can't uninstall - Please help
Hello all,
Looks like I have this double whammy. Everything started when I had the brilliant idea of installing version 6.0 of desktop software. It installed fine and recognizes my BB (8330 Curve). I can save my BB content however it will not let me synch when I try to do this I get the “Intellisync Unknown Error” message.
I then noticed that version 4.5 was still there so I tried to uninstall it. However I keep getting that dreaded "Could not access VBScript run time for custom action" message. I’ve looked for this error in the forum and tried to apply the recipe I found here, namely to register the VBscript DLL. I’m getting a message saying that the register process was successful, however when I try to uninstall I still get the VBscript error message again. I then tried to do a manual uninstall of version 4.5 and tried to reinstall it. It did but now I can’t synch using version 4.5 anymore now getting the “Intellisync Unknown Error” message there as well.
Just so you know, I’m running Windows 7 32-bits, and I have an admin profile on my machine.
So now I have two versions of desktop software that do not work and that I can’t uninstall! If anyone can help I would be very grateful because I’m running out of things to try.
Thanks in advance,Have you tried installing Microsoft® Windows Script version 5.6? Since you are unable to uninstall the Desktop Manager, try manually deleting the folders from your computer (Task 3 in the following KB article) and removing the associated registry keys. http://bbry.lv/cmoQ5P Then reinstall version 6.0.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
I am trying to run iTunes. When I do I get this message "Apple Application Support was not found. Apple Application Support required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Wiindows error 2)" . However, in Control Panel, there isn't an option to remove or unistall iTunes, only an option to repair.
Now, when I dowloaded iTunes, i saved it to my flash drive so that i can have it with me whereever I go. I am not sure if the problem stems from there. I also did this so as not to save it on my work computer but still be able to run it from my flash drive.
Please HELP. I miss my music and podcast.This solved my question by b noir on Aug 26, 2011 7:23 PM
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Quicktime will not uninstall- please help
I am an XP SP2 user. Over the past 24 hours i had an issue where windows installer kept trying to re install iTunes even though it was installed. I solved this by removing from iTunes via control panel. However, before I reinstall iTunes I need to be able to uninstall quicktime version 7.1. This was originall in add/remove programs. However when I went to press remove to start the install wizard, it sort of started then did nothing, this starting then doing nothing has continued throughout all attempts at anything. It has now disappeared from the add/remove section. Furthermore, it no longer has the proper icon next to it, it is a windows icon. I have tried in normal mode and safe mode to uninstall quicktime from the quicktime file on the start menu. All of this has been to no avail. PLEASE HELP!
I should add that I do not get any error messages.
I know i have posted this before but I am desperate!hey there,
I had this same problem and followed directions from a previous post. i went to the quicktime standalone download, and clicked it. subsequently, quicktime uninstalled automatically because i already had it. (unistalling it via conventional methods didn't work for me either) the set-up icon saved to my desktop and my computer restarted after it uninstalled the program. after restart, i clicked on the setup icon for quick time, reinstalled it from there and voila! itunes! thank goodness. -
Dear All,
I have installed 11g R1 (win 32) successfully on windows vista (home premium).
However I was not able to connect on configuration assistant since yesterday.
I tried to delete using DBCA GUI but unable to do so then I tried to uninstall using Oracle Universal Installer but it also hangs.
I understand I can deinstall by using deinstall utility or manual un install but I am trying to understand the issue.
I noticed below error in clsc file
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2012-05-31 10:34:56.566: [ OCROSD][5080]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
2012-05-31 10:34:56.566: [ OCRRAW][5080]proprinit: Could not open raw device
2012-05-31 10:34:56.566: [ default][5080]a_init:7!: Backend init unsuccessful : [33]
2012-05-31 10:34:57.686: [ CSSCLNT][5080]clsssinit: error(32 PROC-32: Cluster Ready Services on the local node is not running Messaging error [9]) in OCR initialization
Please can you help me out.
Thanksuser593397 wrote:
Dear All,
I have installed 11g R1 (win 32) successfully on windows vista (home premium).This is not a certified/supported combination - http://docs.oracle.com/cd/B28359_01/install.111/b32006/reqs.htm#CHDHGGFE - Home versions are not certified.
However I was not able to connect on configuration assistant since yesterday.
I tried to delete using DBCA GUI but unable to do so then I tried to uninstall using Oracle Universal Installer but it also hangs.
I understand I can deinstall by using deinstall utility or manual un install but I am trying to understand the issue.
Not surprising, since the software is not certified on your platform.
I noticed below error in clsc file
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2012-05-31 10:34:56.566: [ OCROSD][5080]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
2012-05-31 10:34:56.566: [ OCRRAW][5080]proprinit: Could not open raw device
2012-05-31 10:34:56.566: [ default][5080]a_init:7!: Backend init unsuccessful : [33]
2012-05-31 10:34:57.686: [ CSSCLNT][5080]clsssinit: error(32 PROC-32: Cluster Ready Services on the local node is not running Messaging error [9]) in OCR initialization
Please can you help me out.Use a certified combinations of OS and Oracle
>
ThanksHTH
Srini -
It wont let me uninstall itunes, it says something about an error occured. Can someone help me?!
Most issues that occur installing or removing iTunes can be resolved by following the steps here.
Other OS
Maybe you are looking for
-
System Settings - Memory usage - Application
In Memory Usage - Application, under System Settings, my slider is set to 100% and gives 2560 MB. I was wondering where this figure of 2560MB comes from, is that the max that FCE can use/access? I have 10Gb Ram on the system in total, why is FCE only
-
How to create folders in iPhoto
How do I create folders on my iMac in the iPhoto App?
-
Hello, I have recently bought a Camileo X-sports. It appears to freeze randomly but regularly when filming. It always happened with the case on. The recording stops and none of the buttons respond anymore. Each time I had to remove the battery to reb
-
Binary addition,subtraction and modulo operations.
Query: Take two 512 bit numbers passed as strings. don't use biginteger! convert them to binary without using parseInt or toString functions.! you may use char array and byte arrays. then add these two binary numbers using binary addition logic. disp
-
Issue when configure connection with BPM-MDS
Hi All, This is Narik. i am getting error issue while connecting the BPM-MDS connection in Jdeveloper. 1. I configured Application server connection. 2. I configured DataBase connection with "DEV_MDS", and i seleced obpm. it is succes 3. While i am c