Uninstall itunes on c drive and reinstall on D drive

I am having problems with my computer running slow and know it it because my c-drive is getting dangerously full (14.6 out of 15.9 gig used) and I want to put itunes with its library it onto my D-drive (11.7 out of 60 gig used).Itunes tells me when I want to put all my songs (currently residing in a My music folder on the D-drive) into the library that I don't have enough room.
How do I best uninstall it from C drive and then reinstall to D drive without losing any music or functionality?

Have a look at this guide, I used it to move my music to another drive and it worked without a hitch: Moving your iTunes Music Folder

Similar Messages

  • If i uninstall itunes on windows 7 and reinstall itunes will i loose my data?

    If i uninstall itunes on windows 7 and reinstall will i loose my data/libraries?

    No. Back them up anyway.
    (93803)

  • TS1538 I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and myApple Iphone appears in Portable Devices. I tried uninstalling the driver and reinstalling it.

    I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and my Apple Iphone appears in Portable Devices only, not in Universal devices. I tried uninstalling the driver and reinstalling it. My Iphone is still not recognized by Itunes when I plug it in. I can see my photos in the internal storage folder on my Windows 7 system though. So I know my PC sees the device. The Iphoneis an Iphone 4 with IOS 6 installed. It was working fine until I had to reinstall my Windows system. Now Itunes does not see it. I've uninstalled Itunes and reinstalled it (64bit) to no avail. Where is the Driver folder article TS1538 talks about?

    Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have an issue with Acrobat, after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
    Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical.

  • Do I have to uninstall the CS4 software before updating the NVIDIA driver and reinstall CS4 after?

    I have just installed CS4 on Windows 7 and I get the message that I need to update NVIDIA driver.
    Is it really neccassary to update driver even if I have no problems using Photoshop?
    Do I have to uninstall the CS4 software before updating the NVIDIA  driver and reinstall CS4 afterwards or is there a way around it?
    Here are the technical details:
    Processor speed: 3325 MHz
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GT 220/PCI/SSE2
    OpenGL Drawing: Enabled.
    Video Card: NVIDIA GeForce GT 220
    Video Mode: 1680 x 1050 x 4294967296 colors
    Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
    Driver Version: 8.15.11.8627
    Built-in memory: 3063 MB
    Free memory: 1981 MB
    Memory available to Photoshop: 1643 MB
    Memory used by Photoshop: 60 %
    Image cache levels: 4

    I have never had to reinstall any program for a video driver.
    Now, check out the instructions for your particular nVidia driver, and the exact steps can differ. Just did my Quadro FX-4500 and it was just an install over the older driver. However, looking at another nVidia card's driver, and there were 3-4 settings in the nVidia console, that had to be reset BEFORE installing that driver. Did not affect me, but would have been a different operation for the next guy, with a different nVidia card. nVidia makes it easy with the necessary instructions - follow those to the letter, or issues can arise and the entire driver can get hosed. Things could be a simple as download, and execute, to having to do several things before you execute.
    Good luck,
    Hunt

  • Cannot print after uninstalling and reinstalling my printer driver

    After uninstalling and reinstalling my printer driver I am no longer able to print a document I used to be able to print on the same printer.
    Now I get "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing."
    I have confirmed the my settings are correct and I am able to print to the printer using other applications.

    After uninstalling and reinstalling my printer driver I am no longer able to print a document I used to be able to print on the same printer.
    Now I get "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing."
    I have confirmed the my settings are correct and I am able to print to the printer using other applications.
    It's the same printer driver version. nothing to roll back. I fixed the issue by deleting the %APPDATA%\Adobe\Photoshop Elements\11.0 folder

  • HT1351 I upgraded from Vista to Windows 7. I saved my iTunes on external hard drive and reinstalled them.  My iTunes no longer recognizes my device - a 5th gen. iPod. I can's synch

    I upgraded my Dell computer from Vista to Windows 7.  I saved my iTunes library on an external hard drive.  I somehow managed to erase them from my iPod.  Now my songs won't play on the Dell and my iPod is not "recognized" as a device by my computer.  I have "reset" the iPod by toggling the lock and holding down the menu and center button at once, but still no luck.  How can I get my songs from my Dell back to my iPod?

    At a guess you followed the process in HT1364 - iTunes for Windows: Moving your iTunes Media folder which would have moved the media folder to a new path of your choice. This process leaves the library database files back in the original location of <User's Music>\iTunes. Often people assume that all they need is now on the external drive and wipe the internal drive, or discard their old computer, before backing up the all important iTunes folder. If you have a backup of your user's profile folder from before the upgrade the iTunes library folder should be in there somewhere. Restore it to <User's Music> and your original library should pop back into existence. The external drive would need to have the same drive letter that it had previously.
    A more effective way to relocate the library is to move the entire iTunes folder to the external drive, then hold down shift when starting iTunes and keep holding until asked to choose or create a library. You would then choose the file iTunes Library.itl in the iTunes folder on the external drive. If this is the way you moved the library before then that is how you should now reconnect to it. Changing the media folder in preferences doesn't change which .itl database file is opened, nor does double-clicking on an .itl file directly.
    If you no longer have the original .itl file then you will have to build a new library and import the media to it. If you need to do this I would recommend you create a new library at F:\iTunes, then move your existing media folders inside F:\iTunes\iTunes Media before importing. This will avoid the creation of duplicates and make sure the library is in the correct shape going forwards.
    If you have an iPod or iOS device my scripts ImportDevicePlaylists and SyncStats may well let you recover ratings, play counts & playlists from the device.
    When you've fixed up your libray you should consider getting a second external drive to backup to.
    tt2

  • My HP computer's hard drive crashed.  I have replaced the hard drive and reinstalled all of the software.  I have copied my I tunes library from my backup hard drive to the new one.  How do I restore the permissions?  This is the 3 rd time I have had to d

    My HP computer's hard drive crashed.  I have replaced the hard drive and reinstalled all of the software.  I have copied my I tunes library from my backup hard drive to the new one.  How do I restore the permissions?  This is the 3 rd time I have had to do this.  THe share screen says you are limited to 5 ??

    No backup is not good.
    You can transfer itunes purchases from an ipod.  File>Transfer Purchases

  • Formated hard drive and reinstalled operating system

    I recently formated my hard drive and reinstalled my operating system. There was some application and music that I purchased on my ipod touch that I forgot to backup. They are still on my IPOD but not on Itunes on my computer. Is there any way of getting these back?
    Thanks,
    Marckc

    If you only want to copy your purchases to the computer that can be done using iTunes, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (including purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod Touch or iPhone. You'll find that they have varying degrees of functionality and some will transfer data (such as playcounts and ratings), movies, videos, photos, podcasts and games as well.
    A selection of iPod/iPhone to iTunes utilities:
    Senuti Mac Only (iPod Touch & iPhone compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)

  • My 2009 MacBook Pro keeps restarting even after I wiped the hard drive and reinstalled OSX.

    About a month ago, my laptop started to randomly turn off: I would be using either Chrome, Photoshop (the free CS2 version available from Adobe's website) or Powerpoint, and the screen would go blank. I would then have to hold the power button for a while until the little light at the front of the computer would flicker and it would restart. I brought it to the Mac Store where they tested it and said it looked fine. They suggested I erase my hard drive and reinstall OSX as a precaution.
    Fast forward a month, I have been very busy with work and hadn't been able to fix this problem. It wasn't that bad, only once every couple of days, sometimes more, sometimes less, I could work despite this problem.
    Then, I installed OSX Mavericks. The installation started in the morning, but, like an idiot, I paused it to go to work. Later on, I completed the installation, it looked fine, but then all day long my laptop would suddenly restart and go to a grey screen that said in multiple languages "Your laptop restarted because of a problem, press any button to continue the restart." A computer technician friend of mine checked it out and said it was probably due to the badly installed OSX and suggested that I erase my hard drive and reinstall OSX.
    I backed up all my files, erased the hard drive and reinstalled OSX. Everything looked fine.
    Then it happened again.
    Any ideas of why this is happening?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    I am in the same boat. I tried repeatedly to contact iTunes support, but was told each time that I had contacted the wrong deaprtment and they could not help me. There must be a way to still be able to use the iTunes store without paying for a system update. If not, I hope they will reimburse me the money I have in my acount.

  • How do you erase and reinstall a hard drive without a disc? I bought this mac book pro under a year ago and am pretty sure i downloaded mountain lion from the app store. Basically Im having startup issues and this is the final step Ive reached

    when I start my laptop it loads a third of the way and shuts down automaticallyI've tried to safe boot, repairing discs and clearing RAM but nothing has worked. basically I've come to the final step of having to a erase my hard drive and reinstall mountain lion however Apple support suggest that I install from a disc however I installed mountain lion from the App Store. can anyone help me go about this?

    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I'm getting the grey screen during start up and can't boot the computer. I did a cmnd R but worried it would automatically wipe my hard drive and reinstall OS.  Is there a risk at cmnd R will result in wiped HD without me actively making that choice?

    I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
    I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
    I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?

    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • I have a iMac 6,1 that I want to reformat the hard drive and reinstall Snow Leopard version 10.6.3 . I don't know how to reformat

    I have a iMac 6,1 that I need to reformat the hard drive and reinstall Snow Leopard version 10.6.3 . How do I reformat ?

    Boot the ssystem from the OS DVD. Once it is booted run Disk Utiltiy. Select OS Extrended (Journled)
    See http://support.apple.com/kb/HT3910?viewlocale=en_US&locale=en_US

  • I have to reformat my hard drive and reinstall all of my programs. What do I do about Creative Cloud? I also still need access to CS6 (I have a Marksware converter for InDesign to Quark).

    I have to reformat my hard drive and reinstall all of my programs. What do I do about Creative Cloud? I also still need access to CS6 (I have a Marksware converter for InDesign to Quark).
    This is a MacBook Pro 15" (Model number A1286) running Mavericks. Hard drive is fine but system software has been corrupted. I cannot simply restore from Time Machine as it will copy the corrupt system.
    Will I have to find all of my serial numbers before I can launch any of the programs?
    Thanks

    For the Cloud, you log in to your paid Cloud account and download & install the same way you did the first time
    Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
    If you have the perpetual license version of CS6 you install from your original media and use your serial number
    If you have the version of CS6 that is installed via the cloud use this link
    http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
    -or http://www.adobe.com/downloads/other-downloads.html

Maybe you are looking for

  • How can i open a DOC or TXT file and insert the data into table?

    How can i open a DOC or TXT file and insert the data into table? I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...'). I'd like open DOC file and I'd like insert them into the table with same columns. Thanks

  • Locks up on google, yahoo mail, running windows 7 on imac with bootcamp

    I'm running windows 7 on an imac with bootcamp. When I go to google or yahoo mail, I never seem to land. It seems to lock up. The links aren't active nor are the back buttons. When I close it, out it doesn't shut down, so I have to shut it down in ta

  • Exchange 2007 - The XML document ended unexpectedly.

    Hello, I'm trying to connect with a exchange server 2007 sp3 through EWS.  I can connect but when I try to retrieve a calendar item I'm getting this error:  The XML document ended unexpectedly. It seems that the EWS/Exchange isn't well configurated.

  • Deleting "student" from login name

    How do I delete the word "student" from next to my login name?  I see instructions on changing the avatar (which I did) but I do not know how "student" wound up there.  Anyway, how do I change that? This question was solved. View Solution.

  • How to build a shareable lib .so in Sun?

    Hi! I try to build a shareable lib. I am using gcc to compile my library. Then I use ld. Here is my way of doing it. I am not sure if I have done it right. gcc -ansi -shared -fPIC -c mylib.c -o mylib.o ld -r mylib.o -o mylib.so Please let me know if