Uninstall Lexmark Printer Driver

So, I had to install a lexmark s403 ('er something like that…functionally similar) as part of my job.
I don't actually use it. I was troubleshooting why someone couldn't get the wifi-based print server to work. My conclusion was that he was dumb. But installing it littered my hard drive with a bunch of garbage I neither need nor want.
And I can't find an uninstaller or a list of installed files and config changes. I'd rather not reinstall from scratch to get rid of it.
Anyone happen to have a list of files/changes for the install or know of an uninstaller that I can't seem to find? thanks.

Your profile info indicates Leopard and these are the Snow Leopard forums. Either post there or update your info. Printer drivers are usually stored in /Library/Printers/"name of printer manufacturer"/ and possibly a "name of printer manufacturer" folder in /username/Library/.

Similar Messages

Lexmark printer driver error

Im having issues with connecting my mac to a Lexmark P4350 printer. I connected and it worked for a while and then stopped. Now it consistantly is in pause mode and an error message that its unable to use the legacy class driver.
How can I resolve this? I tried to uninstall the printer driver but I recieved an error message to say this was unssupported. So i deleted all signs of Lexmark on the printer and then reinstalled without success.
Any helpful comments are appreciated!

no, unfortunatly its still wont print. New error message in the printer log:
Cannot find function pointer USBPrinterClassFactory for factory 90F72EE8-60CD-11D8-971A-000A95A72C48 in CFBundle/CFPlugIn 0x7f9922c788a0 </Library/Printers/Lexmark/2005/LexmarkUSBClassDriver.bundle> (bundle, not loaded)
If anyone can help it would be greatly appreciated!

How to uninstall a printer driver?

In the office where I work with my Mac there's a Canon copier/scanner model iR2318. Months ago I downloaded and installed the Lion compatible drivers required that worked fine.
Yesterday (with no reason, no changes, nothing at all: just working) the printer started to refuse to print as it asked for a different paper format: A4 or Letter. Despite many attempts to specifically send print jobs in A4, which is the paper format loaded in the tray, the printer continued to refuse all prints.
Today I ended up removing the printer from the list, as it became unnecessary, and I also liked to uninstall the printer driver as well, since Canon released a newer version.
Currently, when trying to reinstall the printer, 2 drivers are displayed: UK and US. This lets me assume that those 2 drivers are still installed in my system: I wanted to remove both of them and start from scratch by reinstall the driver and he printer as the system was new.
How can I remove the driver, so that Lion won't recognize it and that I could make a clean install of the previous working printer?
Please…as a former Windows user, the most unwanted answer is "try to recover your system"!

Once deleted those files, when installing a new printer, the list of available drivers still shows the deleted ones. Are they truly available or is the list that has not been updated? And, yes: I restarted my system after deleting the driver folder.

Lexmark Printer Driver

Can any point me in the right direction for the Lexmark X4550 printer driver for iMac using OSX v10.3.9

Go to Lexmark's web site where you can download drivers for their printers.

Printer Driver issue

Hi,
I am using printer HP4000X to generate PCL files. This is an PCL6 printer(HP LaserJet 4000/4000N (PCL6)). When I compiled IFD, i have checked this printer to generate MDF file.
When i generate PCL file in Adobe central with this MDF file and a dat file, the PCL file is getting generated, but an error file is also generated along with this saying "[247]Printer Driver `hp4000x' has not been compiled into this MDF.". Can anyone please help me on this. I don't want this error file to get generated.
Thanks in advance.

Hi, I am running into the same issue using Central5.7linux. I have compiled my template with only two test fields and I have made the .dat file very simple, yet, I am getting the same error:
2011/10/18 15:31:14 /u01/jetform/bin/jfmerge: [247]Printer Driver `LEX616P' has not been compiled into this MDF.
request id is pusdlg821-85 (1 file(s))
2011/10/18 15:31:14 jfserver: [314]Agent exit message: [247]Printer Driver `LEX616P' has not been compiled into this MDF.
Does anyone have any suggestions? I have even tried removing the Lexmark print driver option by running setup.exe and I still get this error. I'm not sure how I can be running into this error when I create a brand new .mdf with two fields on it.
Thanks,
Andrew

Where can I find Lexmark Print Drivers v 2.3.1?

Does anyone know here I can find Lexmark Print Driver V 2.3.1. Since I upgraded to 10.6.8 can't print wireless.

Why not check the manufacturer website if it's not on Software Update?

Office 2013 with Lexmark printer - Cannot change printer settings

I have a Lexmark x4650 and I can open the printer settings within all of the Office 2013 applications (Windows 7 64-bit). But after I change the settings to what I want, I cannot exit the printer settings dialog. If I click OK, nothing happens. If I click
Cancel, nothing happens. If I click the X in the upper right of the window, nothing happens. The only way to close the printer settings dialog is to force the Office application to close through the Windows task manager. I've tried re-installing both Office
and the Lexmark print driver/applications with no success. Has anyone else experienced this problem? Does anyone have a solution?
Thanks,
John

We need to narrow down the issue, to see if the root cause is on Office side or Printer side. Please try below steps for troubleshooting:
1. Try obtaining an updated printer driver from the printer's manufacturer. And update your PC, restart and try again.
2. Try to select another printer in Printer
drop-down list in any Office application, and try again to see if we have the same issue.
Printing is primarily controlled by settings in Microsoft Windows:
3. Please try to print a file outside the Office application, say a .pdf file to determine whether your printer setup in Windows is correct or using the Windows Printing
Troubleshooter.
Hope this can help you. Thanks.

CS4 Design Premium and Epson Printer Driver - 64 bit windows 7

Have installed the printer driver for Epson R2400 printer. 64bit, windows 7.
Can print from Outlook, Firefox although it takes about 10 seconds to bring up the print dialog box.
Can't save or print from Illustrator, Photoshop or Indesign.
Does anyone know what is clashing? When I uninstall the printer driver I can save files again.
Thanks for your help.
K :-)

Hi,
You should install windows 7 compatible printer driver therefore go to Epson - Select your location from the map, find the > Drivers & Support link in the top menu, enter the product name into the > Product Finder field or visually browse by category and device.
Get more information to install windows 7 compatible printer drivers :
http://printers.iyogi.com/driver-support/windows-7-printer-drivers.html
http://www.makeuseof.com/tag/3-resources-windows-7-printer-drivers-printer-working/
Hope this helps you.

My Lexmark X2670 printer doesn't work right since I reinstalled the Firefox 3,6 version. I keep getting the alignment page to print over and over. Is there a problem between the two? Do I need a new printer driver? What?Daisynew66

I had to change my hrowser to Firefox because Internet Explorer 9 doesn't work with my ancestry.com program. I can't uninstall Internet Explorer 9. I got Firefox 4 and it didn't work either. I started having problems with my printer working at all then. l was told to go to Firefox 3.x. I looked and there is no 3.x it is 3.5 or 3.6. I downloaded 3.6. Now I keep getting a alignment page and end up having to shut off my printer. I'm using way too much ink. I'm almost out with no hope of getting more ink until I get paid. I can't find anyplace that says to update a driver or that I need a plug-in or what might be I've done everything I know to do.wrong. It has new port cables. Do you have any idea what could be wrong? Do I need to uninstall the printer and reinstall it again? daisy

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

New iMac, can't get Lexmark printer to print pdf files. Is it the driver?

just purchased my first iMac. trying to get pdf files to print-- not working. Other docs will print. Is it the printer driver? The printer is a Lexmark

Might be a driver update available from the Lexmark site for Lion v10.7

Does Mac OS 10.8.5 support a Lexmark X73 print driver?

Does Mac OS 10.8.5 support a print driver for a Lexmark X73 inkjet printer?
There is a printdriver on the Lexmark site that supports Mac OS 10.3.XX will that work?

Wow.....that's fantastic! I couldn't understand a word from my supplier before. Now it works, thanks Tom!

Printer driver for lexmark x6570 does not appear in printer setup utility

Hi
I have just bought a lexmark x6570 wireless printer and have installed the driver on my powerbook, set up the printer (using a usb lead as instructed) but am unable to print anything as the printer driver does not appear in the printer setup utility. I have even tried to move the folder that was created on the desktop to the printer folder in the library folder but still no joy.
Someone help me please!

@YDNA1958
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

[Request] Lexmark 08z printer driver (deb or rpm packages)

Good evening! I have been trying and trying to get either Lexmark's 08z Printer Driver .deb or .rpm to convert to a tar.xz or tar.gz to install with pacman.
Here is a link to Lexmark's support page. (You can navigate to either the .deb or .rpm from there easily.)
I have a college paper due on monday, so it's not immediately pressing.
Thank you for all of your help in advance!
Leo

Thanks ASOM! That did the trick. Next time I will investigate a little more before picking up a new piece of hardware that just started to support Linux.
I suppose I could see that money spent as an encouragement for Lexmark, since they did take the big leap into the scary waters of open source support.
Perhaps with a little helpful feedback, we can get them to put the drivers in a package like HP uses. I don't care what's in the package that gets my printer to work, just so long as it is fully functional. I know, I know.. "Bad Open Source Advocate!" ...but we can just club these companies to death when they don't do every little thing our way. After all, most of us use nVidia cards, since the nVidia blob is still better than the open source nouveau driver. (For the time being. I still have faith in those devs!)

Cannot print after uninstalling and reinstalling my printer driver

After uninstalling and reinstalling my printer driver I am no longer able to print a document I used to be able to print on the same printer.
Now I get "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing."
I have confirmed the my settings are correct and I am able to print to the printer using other applications.

After uninstalling and reinstalling my printer driver I am no longer able to print a document I used to be able to print on the same printer.
Now I get "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing."
I have confirmed the my settings are correct and I am able to print to the printer using other applications.
It's the same printer driver version. nothing to roll back. I fixed the issue by deleting the %APPDATA%\Adobe\Photoshop Elements\11.0 folder

Accidentally uninstalled kodak easyshare printer driver

Hi there. I have just bought my first Mac so I am somewhat of a novice. I have a kodak digital camera so I installed the software that came with it. However then I realised that I could upload all my photos through iphoto and so didnt need the kodak software. I dont want to clog up my Macbook with uneccessary stuff so I uninstalled the software. At the end it also asked me if I wanted to uninstall the kodak easyshare printer driver. without thinking i clicked yes. I have been fretting ever since because my mother has a kodak easyshare printer and if for some reason i wanted to use it, i would like to have that option. i dont want to be uninstalling drivers that may come in handy in the future. can someone tell me if this is rectifiable?
thanks
ps i would phone applecare but i dont currently have the leopard installation disc with me as i have just moved house and my things are split between 2 houses 100 miles apart

Hello s:
Welcome to Apple discussions.
Just reinstall the Kodak software and then let it alone. With today's hard drives, it is not necessary to be particularly careful about "cleaning up."
Barry

Uninstall Lexmark Printer Driver

Similar Messages

Maybe you are looking for