Uninstall ni-switch LV 5.1 win 98

Hello,
  We were having a problem with not being able to initialize a SCXI 1127 hooked to a PCI 4060 card.  The short story is that the card worked in a different machine with 7.1 but did not work in the 5.1 machine.  The DMM software has a uninstall program but NI-Switch does not.  Uninstalling and reinstalling DMM 1.6 fixed the problem, but I also wanted to reinstall the NI-Switch program (before the problem was fixed).
  So I guess my question is how could I remove software that can not be uninstalled?  When I tried to reinstall I just got the message saying 1.1 or higher already exists and the program stops.  I was trying to avoid going to a higher version and having something else go funny because it was upgraded.  I tried MSI Blast, but it did not report any installers for NI.
Bryan

Hi again Bryan,
You can find all these drivers, which are free to download, here:
Drivers and Updates
http://joule.ni.com/nidu/cds/fn/p/lang/en
I understand your desire to keep the driver software as is.  You mentioned that reinstalling the NI-DMM driver fixed the issue with the chassis configuration.  Does this mean your application is running properly?  Also, you said you were moving this application from a machine with LabVIEW 7.1 to a machine with LabVIEW 5.1.  The two different LabVIEW versions will require different drivers and you would need to downgrade the application somehow as well.  There must have been some other steps taken when moving this application, so understanding some of them could help us diagnose the problem. 
If you are running an executable, then you would only need to download the LabVIEW 7.1 run-time engine and appropriate drivers to run the application on the other machine.
Were LabVIEW 5.1 and the drivers already installed on the machine you moved the application to, or did you do this at the same time?
Regards,
John Bongaarts
AE Specialist - Test Products

Similar Messages

  • Uninstall CS3 on XP Reinstall on Win 7

    I have recently install Win 7 on my computer as a second OS. I have CS3 install on the Win XP OS on the same computer, can I uninstall from XP and reinstall on Win 7,so when i upgrade to CS5.5 everything will be in Win7 ? ?  I have all my DVD and Adobe have my purchase history and serial numbers etc . . .
    Thanks - hap

    I'm sure that you can.  But you MUST DEACTIVATE CS3 on XP FIRST.
    The other thing to watch out for is that CS3 may not function properly under Windows 7.  However the workaround for that is to use Windows XP Mode within Windows 7 which is basically a virtual machine that allows Windows XP programs to run within Windows 7.  You must CHECK your hardware specifications to see that XP Mode can run on your computer.  It has to do with hyperthreading within the BIOS of your computer for beginners and there may be other considerations as well such as how much hard disk space you have available and the RAM of your computer.  Do some research BEFORE you take the plunge and convert your CS3 installation over to Windows 7.  In all actuality, if you can run XP Mode you won't need to have the Windows XP OS installed on your computer at all, in my opinion.
    Also, is your Windows 7 a 32-bit or 64-bit OS?  In actuality it is probably 32-bit which means that upgrading CS3 to CS5 and beyond will not make much sense on your hardware because CS5 is built to take advantage of 64-bit operating systems, especially as far as After Effects, Premiere Pro, and Photoshop are concerned, as well as Adobe Media Encoder.

  • Uninstall Dreamweaver 6.0 on a Win 98 SE PC

    How do I uninstall Dreamweaver 6.0 on a Win 98 SE Notebook
    PC? Under Add/Remove Programs in the Control Panel, there are two
    entries: Macromedia Dreamweaver MX and Macromedia Extension
    Manager. Which one do I highlight first?
    Thanks,
    David

    I doubt it matters.
    "[email protected]" <[email protected]>
    wrote in message
    news:e4ni44$p7j$[email protected]..
    > How do I uninstall Dreamweaver 6.0 on a Win 98 SE
    Notebook PC? Under
    > Add/Remove
    > Programs in the Control Panel, there are two entries:
    Macromedia
    > Dreamweaver MX
    > and Macromedia Extension Manager. Which one do I
    highlight first?
    > Thanks,
    > David
    >

  • How do I UNINSTALL my CS4(Vista) from my WIN 8 NEW PC? It wont INSTALL, and NOW wants me to PAY TO UPGRADE to UNINSTALL.

    I purchased CS4 back when. And I never had any problems running it on my laptop (Vista). I finally used up all my 250gb hard drive and my husband just bought me a new WIN 8 desktop. I tried INSTALLING using my CD but WIN 8 wouldnt allow me to install. Adobe said I had to PAY TO UPGRADE so that I could finish INSTALLING. Well NOW since I am unable to do so, I tried going to the CONTROL PANEL and UNINSTALLING. But Adobe REFUSES to UNINSTALL since I do not have the UPGRADE version to allow to do so.
    SO NOW.............I am unable to INSTALL my iCloud program or any other program because my WIN 8 is "currently installing Adobe" and refuses to allow me install another program or Uninstall Adobe.
    HELP!!!

    Current is the Cloud... several monthly/annual plans... stop paying and it stops working
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
    About 2 years old (so no longer updated) is the perpetual license for CS6 for a one time cost Creative Suite 6

  • How can I uninstall if reader is not in Win 8 Programs and Features

    I am running Win 8.1
    Adobe reader is installed, but not showing up in Programs and Feature
    How do I uninstall it if it does not show up there

    http://labs.adobe.com/downloads/acrobatcleaner.html

  • Err MSG Firefox already running even after uninstall & restart, incl x64 version on Win 7x54. Nothing running in Task Manager.

    Error message on Win7 x64 system, new install. First installed FF4 but error message on starting "Firefox is already running but not responding etc (Restart) Same result after restart. Uninstalled, installed 3.0.1 same result. Uninstalled, found and installed 3.6.6 64 bit. Same result. Total inability to open at all. I have 32bit 3.6.6 on this machine - also Win 7 x64 & quite OK.

    You will need to get to the bottom of this problem and try to prevent it happening in the future
    # First of all create and use a new additional Firefox profile. I am hoping that will result in at least a Firefox that you can close-down.<br /> [[Use the Profile Manager to create and remove Firefox profiles#w_creating-a-profile]]_creating-a-profile
    # Note that normally the method of closing down Firefox is to use the Firefox menus | Firefox-button. (Using other methods may create problems, & there are some current / recent bugs <sub>Bug 845681 & 8537799 </sub>)
    #* By default on XP ''File -> Quit'' , (Other systems use the Firefox button options)
    #What you are experiencing appears to be a Firefox hang, although they may often be terminated by killing the Firefox process. <br /> [[Firefox hangs or is not responding - How to fix]]
    #Sometimes after multiple problems Firefox will have multiple copies of the restore files, and although you could loose some information | tabs deleting these non functional copies may be required to resolve the matter
    #* see http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files <br /> and http://kb.mozillazine.org/Sessionstore.js <br /> Note numbered additional copies may exist.

  • Serialnumber disabled after switching to Mac from Win and back to Win.

    Hello,
    i first bought CS6 for Windows, than i switched to Mac.
    I bought a new notebook today and wanted to install CS6 on Windows again, but the serialnumber is disabled.
    Unfortunately, i didnt deactivate the serialnumber on my old PC and Mac. I just deleted it.
    There is no chance to reinstall, because i sold them.
    I was looking for some contact mail or whatever but there is only the chat, which is offline now.
    Is there any contact mail or number for germany?
    What is the problem with this company? I payed money for this and there is no chance to activate this in time?!

    You could contact Adobe thru chat (it does work and is not offline) and ask them to reset your activations.
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache.  If it fails to connect try using a different browser.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Blurry font after switching from WinXP to Win 7 (Was:Schrift im Dreamweaver CS 3  verschwommen)

    <Preran> For the benefit of moderators here, I used Google to translate your content into English:
    Good day,
    I have problems with blurry font in Dreamweaver CS3 after switching from Windows XP to Windows 7
    I have already tried the following:
    In "Edit" Preferences "change font size" - unfortunately that does not work. (which had worked fine in the previous changeover to Windows XP)
    Then I got in the forum www. office-loesungen.de the tip, sometimes seen on the control panel display, which percentage is set.
    When I got the set to the mean value, the writing was not so blurry, but still not really readable.
    Experiments with Clear adjust TypeText were not successful.
    There is a trick, so the font is larger
    If I have to "small" hinders the size that was at 0.75 in the previous pages, it is readable for me, so I could enter the text and read it.
    However, the text is then when uploading larger.
    What can I do now?
    For speedy help I would be grateful
    Best regards
    Guten Tag,
    ich habe Probleme mit verschwommener Schrift im Dreamweaver CS3 nach der Umstellung von Windows XP auf Windows 7.
    Ich habe folgendes schon probiert:
    Bei „Bearbeiten“ und Voreinstellungen „Schriftgröße ändern“- das funktioniert leider nicht. (das  hatte bei der letzten Umstellung auf Windows XP wunderbar geklappt)
    Dann bekam ich im Forum www. office-loesungen.de den Tipp, mal über die Systemsteuerung-Anzeige zu sehen, welcher   Prozentwert eingestellt ist.
    Als ich den auf den mittleren Wert eingestellt habe, war die Schrift schon nicht mehr ganz so verschwommen, aber immer noch nicht richtig lesbar.
    Auch Versuche mit Clear Type Text anpassen waren nicht erfolgreich.
    Einen Trick gibt es, wodurch die Schrift größer wird
    Wenn ich die Größe, die bei den bisherigen Seiten bei 0,75 lag , auf „klein“ verstelle, ist es für mich lesbar, ich  könnte den Text so eingeben und auch lesen.
    Allerdings wird der  Text dann beim Hochladen auch größer.
    Was kann ich jetzt tun?
    Für baldige Hilfe wäre ich dankbar
    Mit freundlichem Gruss
    Renate Gundel

    I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

  • Uninstalling Acrobat 8 pro from a Win XP SP 3 machine I get an error 1324

    I am trying to uninstall Acrobat 8 pro to install 10 pro on a machine. I believe the user may have installed Acrobat 8 pro from a creative Suites install, I can not remove, fix or modify the software, I receive the error 1324 any ideas?

    Acrobat Cleaner Tool
    Mylenium

  • Can not Uninstall Reader 11.0.03 from WIN XP

    Why can't my computer uninstall Reader? I am trying to uninstall because I can not open any PDF files. When I try to install fresh it just says it already exists. Error message does not allow system to even access Reader. Says There is an invalid Pack??? or something.

    You can try using this tool:
    http://labs.adobe.com/downloads/acrobatcleaner.html

  • Satellite L500-13W: How to switch on Wlan with Win 7 - hotkeys don't work

    Hi there,
    i recently acquired this laptop, and i installed win7 64 bits prof. The first problem was that wireless card was not installed, but i go to toshib website and downloaded the new one, next to that i can't activate the card with the fn + f8 key, thats the only way to activate the card,
    i already downloaded some drivers and utilities and i can't activate the card, the hotkey don't work and there's not another switch, software won't work either
    Any help will be welcome
    Thanks

    Hallo Tito
    In front of me I have Satellite L500-154. This laptop has no WLAN switch and in preinstalled Vista you can enable WLAN card using FN+F8 only. I have searched a way to enable WLAN card without FN+F8 key combination. No way.
    So if you have OS without working FN+F8 key combination you will not be able to enable WLAN card.
    I really don't understand why do you think it can be because of laptop.
    Install supported operating system and you will see everything will be OK.
    So it has nothing to do with faulty hardware.

  • But I can not uninstall it  ADOBE ILUSTRATOR CS6 - in WIN XP

    have to uninstall the ADOBE ILUSTRATOR CS6 for disposing of LICNCIA that I reformat the computer, but when I go aControl CONTROL - Programs - UNINSTALL: Me to appear a sale with two buttons, the first button says out and the second I send to a page ADOBE CC (in the CLOUD) but I can not uninstall it.
    So the question is how to uninstall the license debaja me ????

    is correct, so I want to uninstall, in fact they sent me a guide where they come uninstallation photos, but when I tell them I REMOVE PROGRAMS window appears with 2 lie buttons:
    1 boton.- EXIT
    2 boton.- go to CC (url in the CLOUD), and the URL in the cloud does not say anything only promotes the CC in the cloud.
    But do not let me uninstall it as there that ???

  • Switch between applications in Win Taskbar

    We are developing an java application (Servlets) which requires to switch between 2 running applications in windowsXP. We could not find the right code to automate to alternate between two applications in WindowsXP . Anyone please tell us how to do this or atleast where we could find the right resources to help us do this.

    There is more to hardware than the disk... Try the hardware test: Using Apple Hardware Test - Apple Support

  • Operating system: how to switch CS6, LR from Win to Mac?

    i have bought both cs6 and Lightroom in window environment , recently I plan to switch to Mac system.  Please advice how to proceed with the migration. Thank you

    CS6 for Windows requires a platform swap: Order product | Platform, language swap
    You'll be issued a new Mac serial number and you won't be able to use your Windows serial number any more.
    The serial number for Lightroom is multi-platform. Just download the Mac installer onto your Mac and enter your existing serial number.

  • Lightroom 5.3 editting brush doesn't restrict edits to the selection. Win 7 uninstall didn't help

    lightroom 5.3 developed an error when using the brush edit tool: the edit (eg, exposure) was not limited to the selection. I upgraded to 5.4 and then uninstalled (via programs and features in Win 7) / rebooted / reinstalled / rebooted a couple of times, the behaviour remained.  Am I missing a bad setting and if not, how do I do a more complete uninstall?

    Thank-you Elie-D,
    I had a good look at panels on the right.  I found that I must have clicked on the arrow in the ‘effect:’ panel, thus collapsing it’s options.  So, yes, I was using the global slider.
    Way to go!

Maybe you are looking for