Uninstall NVIDIA IDE drivers--how?

I've read a lot about how the NVIDIA IDE drivers are causing problems.  How do I uninstall them?  Is it just from the driver tab for the NVIDIA PATA drivers in Device Manager or do I uninstall the NVIDIA drivers from Add/Remove programs?
Thanks!
Bruce

hansh,
Thanks for the info.  I found "NVIDIA drivers" located in my Add/Remove programs, but when I clicked "Change/Remove", I did not see the NVIDIA IDE drivers listed.  I'll have to double check what drivers are actually being used for the NVIDIA PATA controller.
Bruce

Similar Messages

  • Using Linux with Nvidia binary drivers, how do I enable WebGL in Firefox 8?

    I've heard it is possible to use WebGL in firefox 8 for linux if using Nvidia binary drivers, but I haven't found a succinct recipe. can someone point me to a working recipe?
    thanks!

    You have a WebGL renderer listed on the Help > Troubleshooting Information page:
    WebGL Renderer: NVIDIA Corporation -- GeForce 9800 GT/PCI/SSE2/3DNOW! -- 3.3.0 NVIDIA 280.13
    You can check the values of the webgl prefs on the about:config page via the location bar.
    *http://kb.mozillazine.org/about:config

  • NVIDIA IDE drivers won´t install

    Hi.
    I have K8N Neo2-FX AMD 64 3000+ and the IDE/sata drivers don´t install from cd in any way. Anyone know what folder to look in at the cd. I know Promise and I tried Nvidia/System/CK84/IDE.
    Now I have as follows in devicemanager
    NVIDIA nForce3 250 Paralell ATA Controller (v2.6)
    NVIDIA nForce3 250 Serial ATA Controller (v2.6)
    NVIDIA nForce3 250 Serial ATA Controller (v2.6)
    guess it should be something else instead of the second serial ata.
    TIA ericolsen

    Ok... this is what I found out;
    Device manager -> Update drivers (for SATA controller & RAID) -> No boot !
    Not trying that again 
    Used the .inf files from MSI website
    EDIT: Found this:
         Single SATA or Multiple Drive Array Setup FAQ
    https://forum-en.msi.com/index.php?topic=54484.0

  • NEO4-IDE Drivers

    hi
    i am building new pc and i would like to know from neo4 users what experience you got from nvidia ide drivers. is it necessary to install them or not. i heard that they are causing probs. in my case i will have only my dvd burner on ide ports (no hd) so i assume the win xp ide drivers could manage it.
    thanks

    there is no problem with ide drivers in 6.39 forceware kit.
    and you may return to windows drivers anytime you want.

  • Uninstalling JUST IDE SW drivers

    New system, decided to install IDE SW driver without knowing what they really were. Many have had problems, Can i uninstall just the SW IDE driver? How do i uninstall all of the 5.1 drivers? Will it revert to the original drivers?  If i can just uninstall SW IDE, will it revert to the windows drivers?
    Thanks
    -Chris

    start menu-----> run----->devmgmt.msc
    IDE/ATA Controlers
    if you want to disable ID SW just run instalation of drivers again and when asked for confirmation to enable or disable it answer with no.

  • Win x64 K8N Neo4 SLI--How do I uninstall Nvidia Network Access Manager?

    I'm trying to get completely out of the Nvidia firewall I made the mistake of installing.  I uninstalled all Nvidia drivers, but control program/add-delete programs shows a Nvidia Network Access Manager and a Nvidia Mixer.  Clicking on remove does nothing.  Just ignores me.  I turned off virus, Windows Firewall, closed all programs but I can't get rid of the dumb thing.
    Anybody figure out how to do it?

    Ctl Program/Add remove programs & going to Uninstall Nvidia drivers gives the option to uninstall components, but either checking all or just the ethernet componenet still leaves Nvidia Network Access Manager remaining. Clicking on uninstall does nothing; apparently there's no way to get rid of it
    Regards, Ron

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

  • Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but th

    Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but the Mac would not open it. This system has an ATI Radeon HD 2600 XT 256 MB graphics card. What do I need to do. Do I need a new Card?
    David Rosenblatt
    <Email Edited By Host>

    Vista Ultimate 64-bit recognizes 8 cores. 32-bit recognizes one physical cpu.
    I've had very little trouble in two years. And now I do like Windows 7 but also eager for the RC.
    I've been using the latest Nvidia. There is a method to the madness of how to uninstall/delete and install graphics drivers, or madness in the method. The W7 drivers are easier.
    Nope. Something else. More sensitive to disk errors. You aren't running a program to boost fans. Something.
    And some AV software is more prone to causing trouble. But all you need is a good AV/malware program, and even Norton AV 2009 is acceptable, or Avast or one of the others.
    http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0

  • Nvidia-Beta drivers crash with Kernel 3.18.2

    After the upgrade to kernel 3.18.2 I recompiled the NVIDIA-Beta drivers to discover that crashes in the kernel.  Has anyone got any ideas on how to rectify this issue or have had similar problems?
    Log is at the following link - http://pastebin.com/frfMi9qJ
    And below is a tiny snippet
    [ 15.933352] ------------[ cut here ]------------
    [ 15.933363] WARNING: CPU: 0 PID: 663 at drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x17e/0x190 [drm]()
    [ 15.933393] No drm_driver.set_busid() implementation provided by nvidia_frontend_exit_module [nvidia]. Use drm_dev_set_unique() to set the unique name explicitly.
    [ 15.933394] Modules linked in:
    [ 15.933395] arc4 ecb md4 md5 hmac nls_utf8 cifs dns_resolver fscache tda18271 tda10048 cfg80211 rfkill snd_hda_codec_hdmi xpad ff_memless led_class mousedev joydev nvidia(PO) coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul saa7164(+) iTCO_wdt crc32_pclmul crc32c_intel iTCO_vendor_support ghash_clmulni_intel mxm_wmi evdev aesni_intel mac_hid tveeprom aes_x86_64 lrw dvb_core gf128mul alx glue_helper v4l2_common ablk_helper videodev cryptd drm psmouse tpm_tis media nuvoton_cir mdio tpm serio_raw rc_core battery video processor snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer mei_me snd i2c_i801 mei i2c_core soundcore lpc_ich shpchp wmi pcspkr button sch_fq_codel vboxdrv(O) sg ext4 crc16
    [ 15.933420] mbcache jbd2 uvesafb hid_generic usbhid hid sr_mod cdrom sd_mod atkbd libps2 ahci libahci libata ehci_pci xhci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
    [ 15.933429] CPU: 0 PID: 663 Comm: Xorg.bin Tainted: P O 3.18.2-2-ARCH #1
    [ 15.933430] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z87 Killer, BIOS P1.00 09/16/2013
    [ 15.933431] 0000000000000000 00000000aa63387f ffff8807eb967c98 ffffffff8154f134
    [ 15.933432] 0000000000000000 ffff8807eb967cf0 ffff8807eb967cd8 ffffffff81072bc1
    [ 15.933433] ffff8807eb967f1c ffff8807eb967df0 ffff8807eb990000 ffff8807f295a780
    [ 15.933435] Call Trace:
    [ 15.933439] [<ffffffff8154f134>] dump_stack+0x4e/0x71
    [ 15.933442] [<ffffffff81072bc1>] warn_slowpath_common+0x81/0xa0
    [ 15.933444] [<ffffffff81072c35>] warn_slowpath_fmt+0x55/0x70
    [ 15.933449] [<ffffffffa03f037e>] drm_setversion+0x17e/0x190 [drm]
    [ 15.933451] [<ffffffff811de6b2>] ? path_openat+0xc2/0x6e0
    [ 15.933455] [<ffffffffa03efe0c>] drm_ioctl+0x2cc/0x680 [drm]
    [ 15.933458] [<ffffffffa03f0200>] ? drm_noop+0x40/0x40 [drm]
    [ 15.933460] [<ffffffff811dfd59>] ? do_filp_open+0x49/0xd0
    [ 15.933462] [<ffffffff811e23e0>] do_vfs_ioctl+0x2d0/0x4b0
    [ 15.933463] [<ffffffff811df196>] ? final_putname+0x26/0x50
    [ 15.933465] [<ffffffff811e2641>] SyS_ioctl+0x81/0xa0
    [ 15.933468] [<ffffffff81554ca9>] system_call_fastpath+0x12/0x17
    [ 15.933469] ---[ end trace 1f206c9a64b932eb ]---
    [ 17.257683] ------------[ cut here ]------------

    ok, that worked.
    but my x server will not start after downgrading linux kernel, nvidia and nvidia-utils. oO
    looks like the known problem with the kernel and nvidia freeze. are there more packages that i have to downgrade?

  • My Iphone 5 won't show up in itunes on my computer? Any idea on how to fix this problem?

    My Iphone 5 won't show up in itunes when i plug it into my windows 8 laptop but it shows up on my computer under devices and drivers as an iphone. Any idea on how to fix this problem so I can use my phone in itunes?

    http://support.apple.com/kb/ts1538

  • CS6 Photoshop crashes when trying to use type tool or opening up .psd files. Any ideas on how to fix it???

    I have Adobe CS6 Design Standard (MAC). I have had it about a year and a half and use it a ton! Just yesterday while I was using Photoshop, I clicked to use the type tool, the "initializing type tool" box popped up then a few seconds later the whole program crashed. I tried opening it back up and every time I did it just kept crashing. I restarted and shut down my computer, but still no solution. I even uninstalled the program then reinstalled. Same thing. All of my other tools work just fine (brush tool, eraser, crop, etc.). Also, when I try to open up a .psd file the program crashes as well.
    I tried searching the internet for solutions, but couldn't find much. One suggestion was to delete the Adobe Photoshop program settings file, I did that but it still didn't work. After each crash a report would be sent to Adobe, then another window would pop up saying that Adobe has found a solution for the recent crash. There is a link that says "please CLICK HERE for further details" but the link doesn't take me anywhere. It just doesn't work!
    Has anyone had this happen to them? Any ideas on how to fix it? I really need to get this up and running again!!!

    This is a user to user forum and Adobe Staff does drop by.
    First thing to try is Reset the Type Tool by right-clicking on its' icon in the Options bar.
    If you still have problems, it could be related to fonts. Here is a step by step troubleshooting help doc for that.
    Troubleshoot fonts | Photoshop CC 2014, CC, CS6, CS5
    And basic troubleshooting: Photoshop: Basic Troubleshooting steps to fix most issues
    Gene

  • WinProducer2 start error, won't run with nVidia Capture drivers

    I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128.
    If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18)  installed, or the 1.22 version from nVidia's website (as of 2-20-03),  and then try to start WinProducer, I get the same start-error every time:
    "WinProducer.exe has generated errors and will be closed by Windows....need to restart program...an error log is being generated."
    If I look at the Dr. Watson log, it says WinProducer 2 generated  "Exception Violation c00005."
    If I uninstall the nVidia capture-drivers, WinProducer2 opens right up just fine, but, of course, with no capture capability.
    I downloaded and tried (after uninstalling v.2) WinProducer3 from InterVideo's website yesterday (2/20/03), with the exact same results!   ???
    Anybody else having this problem?
    This is under Win2k, w/SP2,  then added SP3, with no improvement.
    Stenn

    After I made the original post, I tried a lot more things that didn't help:
    I booted in safe mode and tried it but PSP gave an error message that it wouldn't run with the screen resolution that low (800x600); so it did try to run. So I booted normally and set the screen rez to 800x600 manually, then tried to run PSP and got the same error message.
    I did a clean boot with all start-up programs and all services disabled; PSP still wouldn't run.
    I disabled my anti-virus and PSP still wouldn't run.
    Disabled my video card in the device manager and booted with my on-board video; PSP still wouldn't run.
    There's never an error message as long as the screen rez is high enough; when I try to run it, it looks like it's starting to run but nothing ever happens.

  • Any ideas on how to install clx-3185fw on macbook pro

    any idea on how to install samsung clx-3185fw on macbook pro?

    So I'm guessing that this is a printer. Have you checked the Samsung web site for drivers, manuals, etc....? What have you done?

  • After effects instantly crashes while using opengl with nvidias new drivers 178.24

    Since I installed nvidias new drivers 178.24, after effects instantly crashes while using opengl. Anyone else experienced this?
    I have Geforce 8600 GT.
    As a minor note, I had major problems with the new quicktime 7.5.5 update, both After effects and Premiere got problems with interpreting footage and frames here and there got the "missing frame" look. I also got more problems so I uninstalled it instantly. Is there a major problem with the update or a major problem with me?
    Thanks
    / Olle

    I use Vista (in retroperspective this was probably a mistake, but the company wanted to test the capabilities with Vista when we bought the computer a year ago). And specs are:
    *Graphics: Asus Extreme GeForce 8600GT SILENT 512MB DDR3 TV-out HDTV DUAL DVI RETAIL PCI Express
    *HD: Samsung HD501LJ 500GB 7200rpm 16MB SATA2
    *Audio: Creative Sound Blaster X-Fi Xtreme Audio Retail
    *Mem: Corsair QUAD2X4096-6400C5DHX QuadDHX 4x1024MB (tot. 4096MB) Kit DDR2 XMS2-6400 800MHz
    *Motherboard: Asus P5K iP35 4DDR2-DIMM 3PCI 3PCIe SATA Raid Audio GB-LAN Firewire Socket775 ATX
    *Processor: Intel Core 2 EXTREME QUAD QX6850 3.0GHz 8MB FSB1333 Boxed (with cpu-cooler!) Socket 775
    *Power: Sirtec/Chieftec CFT-750-14C 750W 140mm fan ATX2.0 20/24-pin 4/8-pin 12V Modular
    Sorry not to give more info on the Quicktime problem, I don't remember exactly what more problems there where as we have had extremely much to do these last couple of weeks and I just freaked out and uninstalled it as soon as the problems emerged. I do remember the frame issue however, it was very clear, i imported an image sequence in premiere and everything worked fine, then i updated and frames were suddenly dropped, then i uninstalled and installed 7.5 again and it worked just fine. I also tried to flush the cache, restart and generally search for the source of the problem for a couple of hours.
    / Olle

  • Can not install NVIDIA Display Drivers

    I have a T61 (7664-17U) with XP SP2. 
    For sometime now I've had problems with the NVIDIA display drivers.  Occasionally my NVIDIA drivers disappear and are replaced by VGA .  I notice this when I can't Standby or Hibernate my system, those options are grayed out.  Also, interacting with the display is difficult..
    I've tried several times to update my 12/2007 drivers to the latest ones from the Lenovo site.  The latest drivers appear to be installing (InstallShield?) but I get a message after a few minutes that "The system has not been modified. To install the program at a later time, run the installation again."  No other information.
    I found out early that if I install the old drivers everything was OK, until yesterday.  Yesterday when I tried to install the old drivers I got
    " Error Code: -5004 : 0x80070005 rror InformationSetupDLL\SetupDLL.cpp (1968 PAPP:NVIDIA Display Drivers PVENDOR:NVIDIA Corporation (http://www.nvidia.com/) PGUID:EFB7D050-CAD2-11D4-B34D-00105A1C23DD $9.1.0.429
    @Windows XP Service Pack 2 (2600) IE 6.0.2900.2180."
    I tried several iterations of installing the drivers including downloading the latest ThinkVantage installer.
    How can I solve this problem?  Should I try downloading the latest drivers directly from NVIDIA website?
    I'm very appreciate of any help!  Thanks, Tilly

    "Should I try downloading the latest drivers directly from NVIDIA website?"
    You can't install drivers obtained from the NVidia website. You'll get a "No compatible hardware found" message.
    You're supposed to only install video drivers obtained from Lenovo.
    If your T61 is still under warranty, a request for service is in order.
    Centex

Maybe you are looking for