Uninstall or remove the exsisting SID's
hiiiiiiiii
i have had a existing SID's. hw do i remove it
i deleted a the oracle unzipped file and at the home directory i deleted a couple of files but couldn't delete all the files, because its saying the file is open when everything is closed
so hw do i remove the remove the existing SID's.
it says this file cannot be completed (deletion)
becsuse this file is open in another programIf you have a file open using a program, you can not delete it. Remember that Notepad, Wordpad and Windows Exploder are also programs that could cause this to occur.
If you have already deleted most things, especially the ORACLE_HOME/bin, then it is probably something in Windows, not Oracle holding it open. Try going into 'safe mode' to attempt the deletion - assuming there is such a thing in whichever version of Vista you are using.
Similar Messages
-
I descarguei these new versions adobe creative Cloud, y uninstalled for removing the trash, why did not interest me, then appearing me sigue to update something that I have not already installed, how do I solve this problem?
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
As above. I can not find any were to close the right side page?
Opening in the side bar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the side bar" is not selected.<br /> -
I have been using VM Fusion for over a year to run a Windows-only graphics-intensive program and it just doesn't work well in the virtual environment--lots of bugs and quirks. It's been suggested that I switch to Bootcamp. Do I have to uninstall Windows 7 from the virtual machine side (and my other program) before setting up Bootcamp, or can Bootcamp find the windows installation I did through Fusion? Any other tips for an easy transition would be greatly appreciated.
You need to reinstall Windows using Boot Camp Assistant. If you had a Boot Camp installation of Windows and wanted Fusion to use it there would be no problem doing so. But a Fusion installation of Windows can not be used by a Boot Camp partition.
-
Why have you removed the bookmarks side panel button? This is THE most important feature of firefox.
Since last update of firefox, the button to open the side bar bookmarks have been removed (ctrl+B) equivalent.
I don't want to do a ctrl+B command in a graphical interface that I use so often. There is no good enough extension for that task.
This is THE reason I used firefox since the begining.
I have gazillions of bookmarks cleanly ordered since YEARS of web browsing. This is the way I use internet. If I have a project I create a folder and I put every interesting links I want to remember in it. There is no way to do that in a dropdown menu which close at every click.
I know people who use chrome and keep up to 60 tab open just to remember what they need.
I just spent half a day searching for proper extension in chrome and opera.
I feel so frustrated and powerless in front of browser developpement, I have to tell it. I would gladly pay 20$ per year to keep that function there, a single button sending ctrl+B command, so simple and already coded.
Firefox was my only browser for years, I leave you with that. Now I'm going to download and try the new internet explorer.You can find the link to open the bookmarks in the sidebar at the top of the bookmark menu button list that opens if you click the folder button (Show your bookmarks) next to the bookmarks star on the Navigation Toolbar.
You can look at the Classic Theme Restorer extension to restore some functionality that was lost with the arrival of the Australis style in Firefox 29.
*Classic Theme Restorer: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
*You can check out the settings of the CTR extension via its Options/Preferences button on the "Firefox/Tools > Add-ons > Extensions" page.
*You can find extra toolbar buttons and more toolbar settings in Customize (3-bar Firefox menu button > Customize)
In current Firefox releases (29 and later), that have have the Australis user interface, the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox -
Uninstalling addin removes the "Excel" entry in the registry
I have VSTO addin and on uninstall, in registry HKLM->Wow6432->Software->Microsoft->office->excel->addin, both excel and addin is removed from the registry. Because of this the other addins also get destroyed. How to fix this?
Registry entries are mentioned below. The properties of everything is "DeleteAtUninstall" is set to false and transitive to true and MyAddin properties are is set to "DeleteAtUninstall" to true. But even then, the "Excel" entry
only is removed. How to make this work?
RoopiniHi Roopini,
I guess that you use Click-Once. If that is the case, please ask in ClickOnce and Setup & Deployment Projects forum.
https://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winformssetup
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do I uninstall or remove the trial Aperture 3 software?
I installed the trial version of Aperture 3 but don't want it. How do I properly uninstall it?
Drag the application to the trash.
Delete the following folders and files:
~/Library/Preferences/com.apple.Aperture.plist
~/Library/Caches/Aperture
~/Library/Application Support/Aperture
/Library/Application Support/ProApps/Aperture System ID
~/ is your Home folder. -
How do I permanently REMOVE the Face Recognition program in Windows 8.1?
I want to Uninstall, permanently REMOVE, the Face Recognition program from Windows 8.1. When I select this program from the list of all programs displayed, I am not given an "uninstall" option, only the option to "change", which
then begins to install. I was able to uninstall once before, but somehow the program was placed back onto my computer and now the "uninstall" option is no longer available. Thanks!Hello DePaix,
What is your current situation?
Have you tried the solution as MVP Cyber_Defend_Team mentioned?
Do this program preinstalled? If yes, we need to contact the manufacturer to receive better support.
If my understanding is right, you uninstalled it once, but the program was back and only the option to ‘change’.
Could you please provide us a screenshot to avoid misunderstanding if you willing to?
Can you run the program? If the program runs in the startup, we could use the tool System Configuration (msconfig) to disable apps or services that normally run at startup.
For more information, please take a look at the following article about using system configuration.
http://windows.microsoft.com/en-hk/windows/using-system-configuration#1TC=windows-8
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Photosmart 8230. How do you Remove the print heads for cleaning?
Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
This question was solved.
View Solution.I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET. You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them. The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
----- Original Message ----- -
How to remove the installed JDeveloper Update causing error
Hello there,
I install some webcenter available updates this morning...after restarting the JDeveloper11gR1 I am experiening error.
Can someone tell me how to remove the newly installed update so that I do not experience this errors again?As the last resort you can rename the systemxx.x.x.x.x. folder and restart jdev again. When you are asked if you like to migrate, answer no as the error is likely to be migrated too.
If this does not help you can uninstall jdev, remove the whole installation folder and reinstall jdev.
Timo -
When I try to uninstall my itunes I go to my control panel to remove the Apple "Application, Mobile Device, software support" then i get a pop up saying that "the feature you are trying to use is on a network resource that is unavailable" I cant find it. Its preventing me from re installing the new itunes.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time? -
How do I remove the coloured bars from running down the side of my emails.
How do I remove the coloured bars from running down the side of my emails.
Hi
The setting I have in Composing are-
Composing
Message Format - Rich Text
In addressingonly have tick in When sending to a group
Responding - tick only the first two boxes
Last only the bullet for Include selected text
Hope htis helps -
I just did the iTunes update to 10.4 (80) from 10.3 on a MacPro OS X 10.6.8 . I am extremely nervous and saddened by a subtle change to the smart playlist editing features. I have 178.26gb of music, and a very extensive array of playlists and smart playlists taking full advantage of all the wonderful features and complexity someone has taken the time to develop. I have taken years of time developing my library, and this one little change will set me back substantially. The change? Removing the ellipse as the 3rd button option along side the adding or removing a parameter. The button allowed one to create levels or groups of parameters within the dialogue window that could act independently within one smart playlist. For example, songs from artist "A" needs at least 2 stars to be included, while songs from artist "B" need three stars, and they both can be in the same smart playlist which has its first level of complexity. I have lists that go dozens of layers beyond. And dozens more that cross reference. Is there any way we can get the hierarchy back, ie. Reintroduce the ellipse button? Or is there something new I do not know about? Thanks!
I would like to second this.
This subtle yet life-changing removal is a total loss for advanced users that (used to) take full advantage of "logical and hierarchical" playlists. It tremendously impairs the "smartness" of the feature, effectively removing the possibility of mixing "and" & "if" parameters—which was the real beauty of the whole concept of "smart playlists" à la iTunes.
Here's a simple example. I would like to create a playlist combining two genres (rock and electronic) with only songs that have a rating higher than 3. I cannot do that anymore. I need to create two playlists:
a first playlist (A) that displays [Rock] OR [Electronic] (note that this playlist will never be played, it's an intermediary step required for B)
then a second playlist (B) that displays [songs from playlist "A"] AND [with a rating higher than 3].
It's a pain. And it clutters up browsing lists on my iPad/iPhone a lot.
Smart playlists should get the ellipse button back!
Moreover, the possibility of creating / editing smart playlists on iOS via a nice menu would be just… awesome. I would have thought Apple was going in that "smart" direction with iTunes. In hoping it's just a delay… until iOS 5 maybe? -
I'm using firefox 3.6.11, and windows xp. I've manually searched the uninstall prompts in the firefox folder, but they do not work.
I need to uninstall firefox as it uses more of my memory, especially with the new plug-in bin container, and my little netbook just can't handle it. (Hence why I tried installing the portable version, but whenever I try to use it the main firefox starts up as well - even though I have uninstalled it).
Thanks for any help!!The following link shows you what files/folders to remove if the uninstaller does not work - http://kb.mozillazine.org/Uninstalling_Firefox
-
Auto remove of log files on the client-side is not working
Hi,
I have a setup for one-to-one client/server replication database. Everything is replicated ok.
But on the client side, I see the log.00000000xx files are not removing at all,
while the server has only 2 last log.00000000xx files left. But if I switch the role of the client/server,
the newly server will eventually removed the unused log.00000000xx file, and have two last log file left.
Both client and server database environment setup has called dbenvp->log_set_config(dbenvp, DB_LOG_AUTO_REMOVE, 1).
Is there any additional setting for the client-side to auto remove the unused log files?
Thanks,
SandraHi.
First, what version are you running? We created a test to confirm that this feature is
working as expected on both a master and a client site. What flags do you have set
for replication? I think we need to have you run with replication verbose messages
set on the client site and possibly other diagnostics in order to determine what is different
about your setup. We should take that level offline. Verbose messages can generate
a large amount of output.
You can contact me at the typical [email protected] and we'll move it
forward that way. Thanks.
Sue LoVerso
Oracle
Maybe you are looking for
-
Material Master replication ... ECC to CRM
I have a requirement to replicate a material master record from ECC to CRM, based upon an 'external event' (i.e. an event other than the change of the material master record itself, in ECC). The event is the change in status of a record in a z-tab
-
I have iWorks 9 that includes Pages 4.3. I created a document and saved it as a "pages" file. When I tried to open the document the next day, a dialogue box told me I needed a newer version to open the file. The information provided stated the new
-
Problem trying to Catalog/Move with PSE 7.
I'm running PSE 7 on Windows XP with SP3. I want to move my catalog from the current location (my internal hard drive) to a new location (an external hard drive). I did a Help/System Info to get the current catalog directory. I checked that directory
-
I imported a 110 minute event (real time analog to digital conversion) into iMovie '08. I was in process of rejecting footage and marking other footage for project when I decided to "move rejected clips to trash". This was taking way longer than I wa
-
Price Date Control in purchase order
Hi All, In ME21N transaction, while creating a PO where can i give the price date control. The PO is created with reference to contract, and in contract the price date control is changed. Now we need to change the same in corresponding POs. I am