Uninstall RDSH role on Win2K12 server

Hi,
Now that after seeing the RDS and TS CAL Interoperability Matrix, i understand that 2012 RDSH server cannot connect to a 2008R2 licensing server. I have a TS environment with RD Licensing Manager running on Win2K8 R2 and have recently added RDSH role running
on Win2K12 server. I am now worried that my 2012 RDSH server will stop accepting the connections after the grace period is over. If i now remove the RDSH role on Win2K12, will it revert back to the old setting of honoring only 2 RDS sessions? Please suggest!
Koushik

Hi,
Yes, if you uninstall RDSH Role Service it will allow 2 sessions for administrative purposes.
If you want you can install RD Licensing Role Service on your 2012 server, install your 2012 RDS CALs, and use it for your 2012 RDSH. You can leave your 2008 R2 RDSH and RD Licensing server the way they are now and the two environments will be independent
of each other.
-TP

Similar Messages

W2012R2 RDSH role installation stuck indefinitely on W2003 AD)

hi there
i'm setting up a fresh W2012R2 for RDSH roles
the server is joined to a W2003 AD succesfully
i had use full domain admin rights to install RDSH roles
the installation of RDSH roles under QuickStart will stop at about 30% of the progress bar, giving the following errors at the event log
error 1202 scecli
error 1002 aplication hang
if used standard deployment for rdsh, the progress will also stop when installating RDCB roles, at about 40% roles
on the same server, i had install rdsh roles on a test W2008 AD environment , working perfectly.
i had also tried using different Domain Admin and Domain Local Admin accoutns to try reinstalling the roles. but it still stuck at 30% of the installation progress

Hi,
Please note that you must use a domain functional level of at least Windows 2000 Server native mode. The functional levels Windows 2000 Server mixed mode and Windows Server 2003 interim mode
are not supported.
If issue persists, please collect the CBS.log under C:\Windows\Logs\CBS after reproduce the issue for further research.
Thanks.
Jeremy Wu
TechNet Community Support

How to use security roles in Weblogic server?

Hello Gurus,
I am new to Weblogic server and I am trying to investigate how to make
use of security roles in weblogic server (5.1.0). Can anyone point me
to some documentation. Specifically, I am looking for instance level,
and method level security and how to use it.
Thanks for taking your time to read this e-mail.
Thank You all in advance,
Hari.

You should read the security information in the Servlet 2.2 specification
that WL 5.1 implements:
http://java.sun.com/products/servlet/download.html
Chapter 11 deals with declarative and programmatic security, and includes a
section on roles:
11.4 Roles
A role is an abstract logical grouping of users that is defined by the
Application Developer or
Assembler. When the application is deployed, these roles are mapped by a
Deployer to security
identities, such as principals or groups, in the runtime environment.
A servlet container enforces declarative or programmatic security for the
principal associated with
an incoming request based on the security attributes of that calling
principal. For example,
1. When a deployer has mapped a security role to a user group in the
operational environment. The
user group to which the calling principal belongs is retrieved from its
security attributes. If the
principal's user group matches the user group in the operational environment
that the security
role has been mapped to, the principal is in the security role.
2. When a deployer has mapped a security role to a principal name in a
security policy domain, the
principal name of the calling principal is retrieved from its security
attributes. If the principal is
the same as the principal to which the security role was mapped, the calling
principal is in the
security role.
Cameron Purdy
http://www.tangosol.com
"Hari" <[email protected]> wrote in message
news:[email protected]..
Hello Gurus,
I am new to Weblogic server and I am trying to investigate how to make
use of security roles in weblogic server (5.1.0). Can anyone point me
to some documentation. Specifically, I am looking for instance level,
and method level security and how to use it.
Thanks for taking your time to read this e-mail.
Thank You all in advance,
Hari.

How to check if a user has a particular role in sql server

Is it possible to check to see if a user has a particular role in sql server? For instance, I need to check to see if the user logging in has wite ability to the database. Thanks in advance.

To answer your question from a Java-perspective, since this is a Java-forum: No.
The JDBC 3.0 specification does not state that the driver has to implement a user credential mechanism.
However, the DriverManager will throw an SQLException if user credentials are not met at all and the Connection should throw you a SQLException when trying to create or execute a statement that you are not alowed to do.

Unable to install Essentials Role on Windows Server Technical Preview (VHD)?

Hi
Having a problem trying to install Essentials Role on Windows Server Technical Preview (VHD)
After reboots, AD installs, I get Configuration encountered some issues in Results wizard.
Updating an preparing your server... 68% completed then it fails with following error.
"An error occurred while configuring Windows Server Essentials. Please try again."
Trying again same error.
Anyone able to get this installed?
TIA

Hi,
I did the same test without any problem.
You could try it again to check the result.
If it does not help, please refer to this kb article:
http://support.microsoft.com/kb/2914651
Regards.
Vivian Wang

What is the role of BIS server in blackberry?

What is the role of BIS server in blackberry?
i need the answer in detail?
Thanks in advance
Solved!
Go to Solution.

intisar wrote:
BIS refer to blackberry internet service ..it is just like an ISP = internet service provider...
Hello,
Actually, not quite "just like". An ISP provides primary internet connectivity to a computer/network, along with often other services (email, web, and other hostings). Most more recent BBs can, with no BIS-level service and using WiFi only, access the Internet just fine for web browsing and some other services. Further, many can, with just a generic data plan, access the same things via the Carrier Data Network. But, in neither case will any of the BB-proprietary services (e.g., BBM, email, BB Protect, etc.) function at all...all BB proprietary services require subscription to an adequate data plan from the mobile service provider.
There further are many different levels of BIS plans...there are hundreds of carriers in the world, some with dozens of different BB data plans available. Some provide email and social networking only, but no web browsing. Others provide web and internet, but no social networking. And there can be quite a large number of variations given all of the different BB proprietary services. But, in all cases, they are provided by BIS...so BIS itself is the overall umbrella of BB-proprietary services, with the different carrier data plans enabling different mixes of those various available services...it all depends on what the user subscribes to from their mobile service provider.
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

2 Clients with Production Role in Production server , possible ?

My company has implemented 2 Systems SAP Landscape with one development and one production server. So far , we have one client in Production server been configured with Production role and one more is configured with customizing role.
If possible to configure the client with customizing role in production server to production role ? I tried but the syatem always tell me that a client with production role is already exist.
Kindly advise .
Thanks.
Leon

Hi, Rohit :
Once again . Thanks for your input .But , I really can't try what you are suggesting here as my production system is running 24 hours per day and I can't really take the risk by just trying open and close the existing client with production role . Based on your 1st reply , you said that Production system is possible to have 2 clients with production role . If it is so , there should be settings that I could configure to achieve this rather than trying to reconfigure the existing client with production role.
Thanks.
Leon
Edited by: Leon Wong on Apr 27, 2009 11:49 AM

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

WSUS server role on Windows Server 2012 R2 - Supported SQL Configurations

According to
this page the supported SQL configurations for WSUS on Windows Server 2012/2012 R2 stop at SQL Server 2012 SP1, but there is no mention of SQL Server 2012 SP2 being supported.
However, both the SCCM 2012 R2
supported configuration page and this announcement state that SQL Server 2012 SP2 is fully supported on SCCM 2012 R2 with no
known limitations. Bearing in mind a big part of SCCM is to perform software updates which in turn requires WSUS to be installed...
... Is SQL Server 2012 SP2 supported on WSUS 4.0 (aka WSUS server role on Windows Server 2012 R2)?

The only thing that mattered for the versions mentioned on TechNet probably is the date the articles are published. I'm no Microsoft employee so I cannot guarantee you support even if I trace back some Microsoft article that explains the lifecycle of MS
products and support.
Fact is that MDT uses a database, SQL is a database server. SQL server has all kinds of compatibility modes to support databases dating multiple versions back.
Another fact is that a Service pack is an
update to the software (be it a large one) Microsoft will not break compatibility with their own products (and may others that relay on SQL server) by an update.
And a last fact is that in general, updates are required when you need support. After all, updates fix issues, and engineers generally don't like ghosthunting a bug that has already been patched.
MCP/MCSA/MCTS/MCITP

Adding Printer as a scanner in print service role (Distributed scan server), would it be possible in windows server 2008 r2 !!

Hello All
I have a sharp printer that support scanniing as well and my question is :
I want to getting use from manage scanner service role that is belonging to the print service role in windows server 2008 , which has the feature of passing the scanned document to users shared folders which are exist in the same server.
but when i try to add my printer as a scanner it did not accept .. so i cant proceed with my objective, which is allowing users to pass their scanned docs to their shared folder
Any idea ?

Can i scan to network shared folder without adding the used credentials, i am looking for this distributed scan features for this issue.
now each time new user will come i will create for him a shared folder with his username and password then i will go to the printer web base page and add this shared folder to the address book, but i need the user to come to add his password. how i can tell
the printer to authenticate him and directt his scan to his shared folder without asking him to enter his password to be able to create an address book for him ?? any help
Thanks in advance !

Service 'MSExchangeADTopology' failed to reach status 'Running' while installing Hub transport role of exchnage server 2010 sp1 on Window Server 2008 r2

Hi
Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
          if ($exsSid -eq $null -or $exsSid -eq "")
          $exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
          start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
        " was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:25:35
Sandeep Gupta

Hi,
It might be a permission issue.
1 :
Add Manage auditing and security log Properties
Administative Tools > Local Security Policy > Local Policies > User Rights
Assignment > Manage auditing and security
Add
Exchance Servers.
2. Check Exchange Trusted Subsystem
1)Open Active Directory Users and Computers
2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
the right hand side select the Administrator group,goto the properties
3)Click members tab and add Exchange Trusted Subsystem
4)Click ok twice
5)Reboot the Exchange server
6)Rerun the Exchange setup
Best Regards!

Do I have to disable DHCP in router and configure DHCP role in essential server to make connection with internet

hi,
'do I have to enable DHCP role on essential server just like sbs server to configure internet and domain name , or that is not really necessary , the router dhcp is enough toconfigure essential server!
thanks
johan
h.david

The router DHCP is enough to use Essentials server. Essentials is designed to work with router dhcp out of the box, but you can choose to install DHCP role on server if you like. If you decide to do that, check the blog post from
here: http://blogs.technet.com/b/sbs/archive/2013/04/22/running-dhcp-server-on-windows-server-2012-essentials.aspx
Also check the Essentials documentation for more details from here:
http://technet.microsoft.com/en-us/library/cc514417.aspx

Home Role in Development server not appearing

Hi Experts,
I found a role called "Home" in my production server and I would like to have the same role in development server as well. I assigned same roles to my user id which availabe in the production server to my user id in development server. But ! I don't find that role in my development server .
Can anybody tell me what could be the reason ?
Thanks in advance
Suresh

Hi goto user admin, select the user and then clcik on assign role and search for eu_role & eu_core_role
add these role to your user.
You will get HOME
Cheers!!
SJ.

Uninstall Sun Java System Messaging Server

Hi, I need Uninstall Sun Java System Messaging Server, but I not find a command to uninstall. Where is it? Any documentation?
Thanks

The uninstall program is located in:
/var/sadm/prod/entsys

Uninstall RDSH role on Win2K12 server

Similar Messages

Maybe you are looking for