Uninstall snow leopard and go back to tiger 10.4.11

On apparently bad advice I installed snow leopard. Now my Nikon software does not work. I want to go back to 10.4.11. Do I have to erase the disk? I put the original 10.4.3 disk in, but the computer wanted to start it using rosetta.

Yes, you will need to erase the drive and install Tiger from scratch. You may want to make a backup of your current drive just in case. I suggest cloning it to an external drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external drive.
Source means the internal startup drive.
Since I assume your iMac is an Intel model you will have to use the original installer discs that came with the computer. You cannot use a retail copy of Tiger. To start:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Extended Hard Drive Preparation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
After formatting has completed quit DU and return to the installer. Complete your installation.

Similar Messages

Uninstalled snow leopard and went back to leopard. happy again!!!!!

battery life is much better. macbook not getting hot and fan doesnt come on anymore. no more spinning wheel.
dont think i will be updating to snow leopard in a while

I had a MBP and iMac running Leopard and after upgrading to SL I too am have a litany of problems (it's not in my imagination and I'm not interested in trying a bunch of different things to try to fix them; doing so may only create more problems as new updates come out to fix those... then I have to potentially unfix my fixes to let Apple's fix fix things, get it?) and I would like to go back to Leopard.
I have Time Machine backups for both systems (MBP on 10.6 and iMac on 10.6.1) from BEFORE the upgrade to SL. I have backups on the TMs AFTER the upgrade to SL. I have no other backups (no bootable images.)
So, my actual question is: has anyone been in a similar position and successfully gone back to Leopard AND restored the TM backup to get them (at least from a user-data perspective) back to a current state?
I know I can't completely restore a post-upgrade backup (that would bring me back to SL), but I would like to go back to Leopard and get back all user data (email, itunes, iphoto, browser settings/bookmarks, etc.)
Has anyone actually done this and can recommend a path of least resistance to get there?
My wife, who was just about sold on going all-out Mac is now considering going back to WinXP and this is screwing with my grand all-Mac strategy... (I was very happy with the stability and trouble-free nature of OS X... not now)

Help deinstalling Snow leopard and going back to Tiger OSX10.4.11

I have just reinstalled Tiger OSX 10.4.11 on my IMac as snow leopard made my machine to slow and crash too often. Now that I have, I cannot seem to open Iphoto. I know my photos of in the memory as I can see them on the previous system file. But I cannot open Iphoto? Can anyone help me with this please?

Hi twosparks, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions. (Well, the Installer actually uses superuser Permissions to do it's work, but after reboot it doesn't guarantee communication with other existing needed files Permissions.)
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

How do I uninstall snow leopard and re-install OSX leopard?

How do I uninstall snow leopard and re-install OSX leopard?

Sorry to hear that, Snow Leopard runs as fast or faster than either Tiger and Leopard did on my Jan 2006 Early Intel iMac on 2GB of RAM?
Before you blame Snow Leopard, run the Extended Apple Hardware Test and check the SMART status of your Hard Drive to make sure that you do not have another problem.
http://support.apple.com/kb/HT1509
http://www.macupdate.com/app/mac/14825/smartreporter

Uninstall Snow Leopard and reinstall Leopard

Any advice on how to uninstall Snow Leopard and reinstall Leopard. My Epson 3800 Printer just wont work with Snow Leopard. Thanks

Hello Anthony:
There is no "uninstall." If you have a backup (hopefully you do) made before you moved to OS X 10.6, restore that.
If you do not, this article gives you the options:
http://support.apple.com/kb/HT1545
Barry

I GIVE UP! Is it possible to uninstall Leopard and go back to Tiger?

I am ready to give up for now. Is it possible to uninstall and go back to Tiger?

If you were wise you would consider other options just besides getting rid of Leopard and throwing it away. First, you could wait until Apple releases OS 10.5.1, then install and update to it. This might help take care of some problems. You could dual boot OS 10.4.10 and 10.5 as long as you have the OS 10.4 full install Disk and the OS 10.5 full install disk. I personally will wait until at least Christmas time before I install Leopard. New OS's are always full of bugs. On the Microsoft side, I've read where Windows Vista is still having major problems and is taking a long time to become widely used. These problems take time to fix. When Windows XP came out nobody would upgrade to it because of all it's bugs, now Windows XP is considered the standard on PCs. Mac OS 10.4 was also full of bugs at first, but now we talk about how rock solid it is. Simply give Apple time to fix these problems.

How to uninstall Snow Leopard? major font problems in iWork, iLife

All iWork and iLife apps have shocking font problems... so much so that I need to uninstall Snow Leopard and wait for Apple to sort it out. Does anyone know the best way? And how is it possible that these problems are occurring with Apple's inhouse software? Other stuff seems to be working OK so far for the most part. For a bit more detail on my problems, including sample images:
http://bit.ly/309G0o

Snow lizard cost me $27.000.00 in unusable fonts. We installed snow lizards (what I'm calling it now) and lost 934 fonts. Say 40 were bad fonts and 896 were type 1 postscript. When I explained to the tech person how big this was to the print community, he had no clue. - I'm still waiting to hear back. I have a case number but now I read from another post they knew Snow Lizard would do this. At 30.00 per font that is almost $27,000 to replace what they thought wasn't important. But in the print world of design this is huge. Every layout and ad that needs an update - which take a few minutes is a whole rework. They have no clue what business a mac computer is in or they don't see us as important.
I did find if I load those fonts or the font missing into the InDesign font folder I can get the old ad to make it to pdf. But photoshop and illustrator, I'm screwed. And if I didn't outline the type in illustrator - it's gone. I asked the tech guy if I can go back, and undo this slimy lizard and he said probably not if we do backups. We do backups every hour - this is the print business. I feel forsaken. I've been with apple for so many years.

Snow Leopard and MS Exchange 2003 -USING OWA-

I have a new 27" iMac with Snow Leopard. I am trying to connect to my company's MS Exchange 2003 via OWA NOT IMAP or POP, OWA. I dont like mail.app or like using iCal for calendering. So I like OWA using Safari or FF.
I also have several other machines in my home office: 8 Macs (Dual G5 - Leopard, 27" iMac - Snow Leopard, G4 Mini - Leopard, 15" Powerbook - Leopard, 15" MacBook Pro - Snow Leopard, 24" iMacs - Snow Leopard, and quad Intel XServe - Tiger) and a couple of Dells one with XP and one with Vista. I'm a geek, can you tell?
On every machine using Leopard and Snow Leopard, I cannot connect to Exchange 2003 OWA using Safari or FF. It takes forever and then once I get the login dialog it eventually times out.
HOWEVER, on Tiger no mater if on Quad Intel XServe or the Dual G5 (I can boot Leopard or Tiger), there are no problems. There are no problems conecting or logging into Exchange via Safari or FF.
Also, to reiterate, XP and Vista on a Dell have no issues, nor does XP on Fusion 3.0 int the 27" iMac.
So it HAS to be related to Leopard and Snow Leopard. Remember it is not an issue of time outs after logging in as some posts on ArsTechnica suggests, here we cant even get to the exchange server in a timely manor. When I ping the server it just sits there.
Ping results
PING chilcoinc.com (72.215.225.9): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
And it just keeps going.
Frankly, I am ****** and don't know what I am to do. I need this access and dread having to be forced into using imap or pop.
Microsoft was been useless. Their solution is Exchange 2007, But they cant seem to understand that I do not want to use mail.app and ical. I want to use the OWA!
Thanks for any help you guys can provide.
Mark

From my MBP with 10.6.2 I can connect using OWA both to a hosted service running Exchange 2007 and an internal service running Exchange 2003.
It sounds as if there is a problem with the network configuration. Is there any firewall between your client system and your company server? Are you using the same IP information (DNS, GW, etc) on the client as on the other systems which work for you?

Help - upgrading from Tiger to Snow Leopard AND new larger hard drive, MBP

Howdy!
My iPhone has finally demanded that I upgrade my MBP from Tiger. And as if by coincidence, my now puny 100GB internal drive is packed full with less than a gig free most of the time. (10% free is the MINIMUM free allowance, I know!!) I run old copies of Adobe CS2, Quark, Quickbooks, Microsoft Office... would love to keep them working without purchasing upgrades, but probably isn't a realistic hope. None of it is mission critical at this point.
So I've purchased the $29 Snow Leopard DVD (from a reseller - it says CPU Drop-In DVD Version 10.6 on the disk), and a new 750GB internal drive (same reseller - The drive is a 2.5" SATA 5400RPM 8MB-Buffer Hard Drive (9MM Slim) (RoHS Green Friendly)), to get with the times.
My other resources include:
- two 1TB LaCie external drives with FW and USB2 ports
- one other LaCie external drive - I think 360GB?
- Retrospect 5.0 (most of my backups are encrypted Retrospect files on those three LaCie external drives, but there's some room on them)
- a $22 USB 2.0 to SATA/IDE adapter with AC power, to access whatever laptop drive might be without an enclosure temporarily
- a copy of Carbon Copy Cloner software
- I just ordered an upgrade to my ancient (OS9) copy of DiskWarrior
- A monster UPS battery backup and line conditioner that everything plugs into for this process
It has been a long time since I've DIY'd any undertaking this complex, and I'm looking for advice on what to do first, how to go about this.
Here's my setup:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
I'm guessing I should do it like this, PLEASE EDIT or make suggestions or tell me what I forgot to do before I do it!!
1. Back up everything to at least two external locations! Also, make a bootable copy of my current internal drive in its own volume, to at least one external drive that is formatted in HFS+ GUID partition style, with Carbon Copy Cloner (would Retrospect work well for this instead?).
2. Free up at least 20GB on the current internal drive (100GB). Hopefully 30GB.
3. Run Disk Utility on the current internal drive. Fix any problems. (Should I hit it with DiskWarrior instead?)
4. Format the new 750GB drive to HFS+, GUID partitions. (How long will that take? Can I do it with the USB-SATA cable adapter, sitting on my desk, or does it have to be in an enclosure? The adapter has AC power)
5. Run Disk Utility (or DiskWarrior?) on the new internal drive in its temporarily external position. Fix any problems.
6. Boot off the Snow Leopard CPU Drop-In DVD and install onto both drives. (Will this version of the DVD I have wipe all files when it installs to a disk???)
7. See how they run. Boot off the old 100GB internal drive, boot off the new to-be-internal 750GB drive. Panic if it's not going well.
8. If the current internal 100GB drive is rocking Snow Leopard and my familiar files and apps seem somewhat functional, use Carbon Copy Cloner to recreate the volume on the new larger drive. Then swap the drives physically. (Links to good step-by-step instructions on this part would be much appreciated here!!)
9. If the Snow Leopard DVD overwrote or snuffed out my familiar files and apps on the old internal drive, sigh deeply, then swap the drives physically. Use CCC (or Retrospect? or Migration Assistant?) to fetch my junk from the old internal drive's backup and plunk it on the new bigger internal drive (now installed).
10. See how it runs. Shake my fist at the sky over the planned obsolescence of technology paired with the seductive power of my iPhone. Grumpily upgrade the software that I actually create income with.
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
Thanks!

Howdy slowpoke43, and a warm welcome to the forums!
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
LOL, if your faking it you're the best!
1. Yes, absolutely... no CCC would be best in my experience/opinion.
2. Yes, the more he better... Free Space is no longer our Free Space, but OSX's.
3. Indeed, & if you have the correct version of DW, do that.
4. Yes, not long, A/C power is great.
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
6. Yes, boot off the 10.6 DVD, & no Snow Leopard does by default what we used to call an Archive & Install, saves & updates all your info, APPs, Music, etc., it may quarantine a few things or not but will tell you.
7. Absolutely, but Panic won't be needed with your great preparation & Bootable Backups!
8. Not quite sure I understand, but run SL for a few days before you do anything.
9. Yeah, but again with you doing everything right from the gitgo, I can't picture that happening.
10. Yes indeed, the hangup with yours is that it only holds 2GB of RAM... a pain in 10.5 & up IME.
Again let me say... GONGRATS, I've never ever seen anybody so well prepared & informed despite your diffidence!

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on. The Tech told me to

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

Am using Macbook pro mid 2010 running on OSX 10.9.5. It does not read my old Seagate back up plus ITB ext hard disk which opens and works on snow leopard. The back ups were made on snow leopard and mountain lion. How do I make it work on Mavericks?

I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

I can not get Time Machine to back up an external WD Passport 2 TB drive! Has anyone else had this problem? The drive is new and I was running Snow Leopard and upgraded to Lion and it still won't do it. Time Machine backs up the internal drive fine.

I bought 2 2TB WD Passport Drives with the intention of housing my iTunes/iPhoto libraries off my older MacBook. I have successfully transferred the Libraries to one and am using the other one for Time Machine. In Snow Leopard I could back up my computer to Time Machine no problem but when I did not exclude the iTunes/iPhoto drive the back up fails. Both drives have been reformatted, permissions repaired and checked in Disk Utility and one was replaced. I have been to the Genius Bar now 5 times. I have tried using USB drive and FireWire. Both drives are recognized and are working properly otherwise regardless how they are connected. Finally yesterday the Apple store installed Lion to see if that fixed the issue and it did not. Time Machine successfully backed up a USB Flash drive, and today I will try an older external drive. Any ideas on what else to try??? Do I have to resort to third party software like Carbon Copy Cloned to get this done? Any ideas why this wont work? I am using a FireWire converter but as I said, both drives are working normally otherwise (libraries working, time machine working for the computer's hard drive. Any ideas would be appreciated!!?

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

How do I make a back up system disk. I wish to run snow leopard and Lion on 1 drive.

I wish to run Snow Leopard and Lion on 1 Hard Drive. I need to back up snow leopard and then install Lion. Any suggestions on how to do this?

Too follow up on this topic - I have recently upgraded to 10.8.2. I have a complete backup HD with SL inclluding some SL-only programs on it. What I want is to make a small size, just SL and my few programs, hard drive with which I can boot when needed. Is it possible to trash all the many programs I have on the SL drive and just keep certain ones? How?
Thanks you for any advice,
John

Can I back up computer with time machine on lion then reinstall snow leopard and restore from backup safely

Can I back up computer with time machine on lion then reinstall snow leopard and restore from backup safely?

If your machine came with Snow Leopard or earlier and you have your install disks, yes, you can reinstall SL. However, you will need to erase the entire hard drive so you will lose all your files. Also note that there are some apps (such as Mail) which can't be downgraded "automatically" such as with a restore from Time Machine. Here is some info on TM:
http://pondini.org/TM/14.html

I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Uninstall snow leopard and go back to tiger 10.4.11

Similar Messages

Maybe you are looking for