Uninstall tool for VC2 and VC3 ?

I had VC2 and VC3 installed on my system and am having problems installing Web Design CS4.  Adobe support told me to uninstall all Adobe products.  I have uninstalled VC from the control panel but is there another tool to make sure all registry entries are cleared up, or any documentation on this?

Thanks.  I am desperate
Miri van Straaten
Tel:  +27 34-3250052
Fax:  +27 34-3250069
+27 82 491 2730
E-mail:  [email protected]
Van Straaten & Assosiates is an authorised Financial Services Provider (FSP
No. 1811) licensed with the Financial Services Board.  The information
contained in this communication, including attachments, is not to be
construed as advice in terms of the Financial Advisory and Intermediary
Services Act 37 of 2002 unless specifically referred to as Advice.
This e-mail and any accompanying attachments may contain confidential and
proprietary information. This information is private and protected by law
and, accordingly, if you are not the intended recipient, you are requested
to delete this entire communication immediately and are hereby notified that
any disclosure, copying or distribution of or taking any action based on
this information is prohibited.

Similar Messages

  • A year or so ago I had turned on a toolbar that sat at the top with the other toolbar, and had many tools for development and checking of websites. You could tu

    A year or so ago I had turned on a toolbar that sat at the top with the other toolbar, and had many tools for development and checking of websites. You could turn Java on/off, javascript on/off, turn on source view, and many other things. Now I cant find that toolbar. All that I can find now turns on a panel in the lower half of the window that probably does all the same stuff, but it takes up much more room. Where did that toolbar go? or was it an add-on or plug-in?

    It sounds like you may be referring to the Web Developer add-on.
    * https://addons.mozilla.org/firefox/addon/web-developer/

  • Wrapping Tool for Windows and Android Platform in Microsoft Intune

    Hi,
    I know that there is wrapping tool for iOS.
    Is there any similar tool for Windows and Android platform?
    I hearad that the one tool "XapSignTool" for Windows. can we use this toll in intune?
    Regards,
    Venkatesh

    First, the plist is a by product of the Apple development process just like the plist is, thus you need to get this from the developer.
    Second, you don't have a choice. Getting ipas for Apple store apps is nearly impossible -- you can't just download them from the Apple store and use them. You can try to ask the developer for them but developers are very reluctant to do this. I can guarantee
    you that you won't get the ipa for Outlook from Microsoft and nearly all other developers have the same reluctance. There is no reason for them to give them to you -- the store offers many, many advantages for developers/publishers of the apps that go away
    completely if they give out the ipa.
    Why don't you want to install apps from the store?
    Regardless, as mentioned, you really don't have a choice.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Does EBS license include tools for reporting and extracting data (queries)

    Hello,
    I'm recommending Oracle EBS to a customer and I need to mention what tools for reporting and extracting data (queries) are included in a Oracle EBS license.
    I hope you can help me with that information, or at least with providing me the place where I can get the info.
    Thanks in advance,
    A/P Sergio Maestri

    Hi,
    Thanks, I think the same ... but the customer asked me about it ... I supose my answer will be that he can use Reports Builder for reporting and Toad or PLSQL Developer to access to the database and make queries ...
    What about XML Publisher ? ...it can be used to make reports against an Oracle EBS database and integrate them into the EBS Application ?I believe you need a developer license to use Oracle Developer (Forms/Reports) for customizing/creating reports.
    Global Pricing and Licensing
    http://www.oracle.com/corporate/pricing/index.html
    And IINM, the same thing applied to XML Publisher -- See this thread for a similar discussion.
    eBiz & XML Publisher - Confusion
    http://forums.oracle.com/forums/thread.jspa?messageID=3834445
    Please contact your Oracle sales representative, he/she is the best one to answer such questions.
    Thanks,
    Hussein

  • Tools for monitoring and Statistic.

    Hi there
    I am looking for a tool that help me to monitoring and take some statistic from ASA 5500 series, for example:
    monitor the number of connections in use
    monitor the number of tunnels in use
    monitor the number of sessions in use
    monitor throughput, packets and errors on all interfaces of the Cisco ASA
    monitor encrypted traffic throughput
    monitor your firewall’s uptime
    monitor statistics for TCP and UD
    Looking at on the internet I found this tool LogicMonitor somebody knows if this tool is good and reliable???
    Thanks everybody

    Hi,
    You didn't mention if you're looking for a free or licensed tool.
    We use ManageEngine/OpManager as our main monitoring and reporting (NetFlow) tool for our ASAs.
    Sent from Cisco Technical Support iPhone App

  • Blackberry tools for repairing and unlocking by rudifast

    hi,
    i am one of blackberry engineering trainers in indonesia
    this is one of our created tools for blackberry repair software
    if this usefull for blackberry repair development
    i will post the link of this software...
    regards,
    rudifast
    BlackBerry Service Point Support Indonesia

    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Single sourcing tools for paper and html help

    Hi
    Today I started a new job where html help is made in RoboHelp
    and the paper manual is made in Word. Both are translated to 5
    languages, so the translators also use Word and RoboHelp.
    Unfortunately there is no single sourcing at all.
    I want to introduce single-sourcing so that I use the same
    source for output to html help and paper.
    I am used to FrameMaker for paper output and the WebWorks
    Publisher plugin for the html help output.
    If I were alone I might use FrameMaker and Madcap Blaze. I
    think however that I can introduce one but not two new tools for
    the 5 translators.
    What Is your suggestion? Which tools should I use? Word
    hasn't the conditional text feature I need. I don't belive that
    RoboHelp can create a Word output which lives up to the Company
    design standards. Besides, will Robohelp live, does it works under
    Window Vista?

    Hi Polle2. First of all there are many users on these forums
    who use RH to single source with no problems. Sure RH single
    sourcing requires a little thought and set-up - just like most our
    "true single source" tools. There's a new version of RH planned
    (version X6) and currently in beta test but we won't know what
    included in it until it's formally released.
    As far as product comparisons are concerned, I've not used
    Madcap Blaze and neither has anyone else as I believe it's not
    released yet. My two penneth worth is you are right to go down the
    single sourcing line and that RH - and other tools - could all fit
    the bill. It all depends on which one fits your specific
    needs.

  • Tools for Variant and Batch Schedule

    Dear all,
    do you know wehther there is tools with following functionality
    - create variant with a input file (information for report names, variant names, variant parameter names and values)
    - schedule SAP jobs with a input file (information about job name, job class, server which the batch should excuted, Steps with batch user name, program name and variant name)
    - tools for mass download and upload variant.
    Thanks and regards
    Tao

    Hi kiran,
    Pl check,
    http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
    http://www.sap-img.com/sap-sd/some-light-on-batch-determination.htm
    https://websmp207.sap-ag.de/~sapidp/011000358700003276182004
    Regards,
    SDS

  • GUI Based tool for search and replace using regular expression

    Hi,
    I have developed this small tool which can be used for search and replace in multiple files using reqular expressions.
    Features:
    1. Full regular expression
    2. GUI based with Highlighted results
    3. Preview for replace available
    4. Pure Java based.
    5. Its like unix sed and grep
    Please visit below site for download/more information :
    http://sourceforge.net/projects/regexsearchrepl/
    Thanks,
    Hitesh Viseria

    I agree with you, it cannot compete grep/sed/awk combination. I couldnt find anything even close to grep/sed for windows which will also have a preview and most important, free. That is what made me write this tool. I am trying to
    improve its performance and more features like history etc.
    Any suggestions on additional features are most welcome.

  • Security tools for audit and penetration testing weblogic server 10.3.5.0 and other

    hi all
    is it possible please introduce me the best softwares for auditing and penetration testing on weblogic server 10.3.5 (scan the machine for finding vulnerabilities and unsecured configuration in web logic server)
    thanks for your attention
    good luck

    This is a good one
    IBM developerWorks : Download : IBM Security AppScan V8.8

  • Feature request: better tools for commenting and editing text

    We currently use a comments-enabled Acrobat workflow with InDesign to track changes to our large catalog project. Was hoping to move our team over to CS Live, but currently the commenting tools are sub-par, and not accurate enough for extensive text editing. My request would be to imitate the text editing functionality of Acrobat:
    In CS Live online:
    - allow users to be able to copy selected text. (This is useful when a reviewer wants to be able to modify a sentence or paragraph. It's a headache now to have to retype the sentence prior to making modifications)
    - Ability to highlight text and hit "delete" to mark text as deleted, or highlight and type over to indicate replaced text
    - Ability to click to insert text, and have the comment appear with the inserted text designation (little blue carat like in Acrobat)
    - ability to highlight a section of text
    In InDesign:
    - ability to copy the text in a comment and NOT copy all the other extraneous meta data. (Currently, if you click "copy text", it will copy the comment along with all the details about the comment. For example, "- Amy Stewart [10.06.11 at 12:56 PM]"
    - ability to see in InDesign the EXACT part of the text that needs to be modified. Right now, the red box outlines the general area. The CS Review panel shows a tiny thumbnail with black highlight over the area of text that needs to be changed, but unfortunately, there's no way to zoom in on it, so you're stuck having to toggle between InDesign and the online review, where it's possible to zoom. (This diminishes the utility of the CS Review panel.)
    If you were able to incoroprate all the commenting functionality of Acrobat, I think you'll have a winner. But right now, we're going to have to stick with Acrobat as it's the only way to easily modify text.

    Sorry if I might be stating the obvious (but at least I was such a *dummy* once that I needed this explicitely):
    In order to move the sequence of images per drag&drop in grid view you need to
    Put the sort order in the bottom toolbar to "user order" (toggle visibility with letter T if not displayed)
    Grab an image from within its thumbnail, not from its border-cell.
    When you move around you see a vertical black thick line wandering in between images where you would be able to drop it
    Put the images first into a collection in case they should be spread across multiple folders.
    This is the reason why most often from a filter result you cannot re-arrange.
    Still sometimes it does not work as I want, but can *be persuaded*, i.e. I repeat the same trial after first moving to another collection, then return back. I can't nail it down sufficiently to file a bug.
    For an automated sorting according to filename (chosse that setting finally in toolbar) you could rename the photos in place, without exporting & re-importing. Just select them and hit <F2> to bring up the renaming dialog like possible during import.
    +1 vote from me, as I am neither satisfied with the responsiveness of moving folders within LR e.g. from laptop hard disk to NAS.
    Apart from that I try not to build much on my folder structure, just break them into manageable quantities and have a quick "diary-overview" by using naming convention "YYYY-MM-DD description of event" (pictures of up to 4 cameras go inside, unique filenames for Canons achieved by renaming during import). For all the rest I prefer to build (smart) collections.

  • Silverlight Tool for debugging and inspecting UI created dynamically from Styles

    We have a Silverlight grid. In the grid style xaml, in row header style, I am creating a custom grid column header with an arrow on the click of which it renders a list box control with columns name and check boxes to select. This
    list is populated from a ColumnViewModel. The listbox on opening overlays the grid. I have to convert it to WPF grid.
    In this case,How to debug and trace visual tree so that I can port the similar tree to WPF.
    Any tool to inspect run time bindings value with Styles and inspect the rendered UI in Silverlight ? 

    Hi,
    Here is a user convert silverlight to wpf successfully and wrote a blog:
    http://robertsmyth.blogspot.com/2011/12/migrating-from-silverlight-to-wpf.html
    Besides, below article talks about code reuse in wpf and silverlight:
    https://msdn.microsoft.com/en-us/magazine/cc895632.aspx
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Source Code Analysis tool for BPEL (and BPMN) 11g

    Hi,
    We are checking for the availablility of 'source code analysis' tools (analogy like findbug, checkstyle) for BPEL / BPMN Orchestrations.
    Any information/pointers to it is really valuable and appreciated.
    Thanks,
    Pavan.

    Hi AnujaMoharir,
    Welcome to MSDN.
    I am afraid that as Renee Culver said, these forums donot support VB6, you could refer to this thread:
    Where to post your VB 6 questions
    You could consider posting this issue in these forums below:
    These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
    VB Forums
    VB City
    Thanks for your understanding.
    Best Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Free tool for tuning and generating alternative quwry

    Can anyone pls guide me as to which FREE software is available for tuning the complex sql queries. Also it will be helpful if it provides alternate ways to design the query in different ways.

    It seems obvious to say so, but the best tool is a well-informed prefessional.
    http://tahiti.oracle.com
    http://asktom.oracle.com
    Concepts Guide, Performance and Tuning Guide, SQL Reference etc

  • Software tools for extraction and transformation from legacy..

    Hi,
    Any conversion process consist of typical three steps :
    1) Extraction: Using custom program for legacy or third party tools
    2) Transformation: Third party tools
    3) Loadting: SAP provided techniques, in mycase I am using LSMW.
    Q1 ) What are the third party tools we use typically for doing extarction and transformation ?
    Q2 ) At what step <b>data cleansing and data staging</b> takes place in above Three steps.
    Thanks.
    Regards,
    Rajesh.

    Q2 ) At what step data cleansing and data staging takes place in above Three steps
    I would say that data cleansing could begin before the data is actually extracted from the source system, if needed.  In some home-grown systems,  you may have obselete data or plain corrupted records which you do not want to bring to the other system,  obviously you can simply delete these records from the source DB.  You could also do some data cleansing when converting the legacy data to SAP data. 
    Regards,
    Rich Heilman

Maybe you are looking for