Uninstalled bunlde not getting re-installed
I just came across this problem today that if I manually hit delete on a bundle in osgi console, and try to reinstall it by dropping it into an install folder, it does not get reinstalled.
If I rename the bundle jar from for example jdbc.jar to jdbc2.jar (anything other than the old name) and drop it into same install folder, it reinstalls.
Same is true for a bundle I built inside crxde lite, if I uninstall the bundle jar from console, rebuilding the bundle does not reinstall it.
Any idea what could be causing this? and How to avoid it.
How to avoid it.
-- Try to avoid deleting bundle from felix console. Use install folder to add or remove bundle.
Yogesh
Similar Messages
-
Reloaded Machines Not Getting Client Installed
We recently moved our FCS/MOM solution over to a new FEP/SCCM solution. Everything was going great until we started reloading some workstations. In the past with MOM a reloaded workstation (from scratch) would automatically have the MOM client
as well as the FCS client reinstalled.
However, in our new scenario, the reloaded workstations are not getting anything. The SCCM server continues to believe the SCCM client and FEP client are still install on those workstations and continue to report a very old "last communicated"
date.
What do I need to setup to get SCCM to reinstall clients as needed? So far manually deleting the machine from SCCM and having it rediscover is the only thing I can get to work. However, there must be an automated route?
I'd appreciate any help!Once again Jason, you are wrong. MOM pushes out it's own agent. As I already mentioned WSUS pushes out FCS.
So lets go down the list of your concerns, shall we?
proper permissions - As I already mentioned, had you bothered to read, it comes preconfigured.
configuration - As I already mentioned, had you bothered to read, it comes preconfigured.
firewall exclusions - Part of the setup is handling your own firewall as is true with 99% of all software solutions. Not sure what your point is here.
DNS resolution - You'll have to explain yourself here. DNS is typically already up and running in an active AD environment.
I'm not really sure what the hell your problem is anyway. 1. SCCM can autoinstall the client on any machine you want through discovery. 2. SCCM can inventory software/services on any machine you want. 3. If SCCM had the capability to auto-inventory,
see the service isn't running and then autoinstall (which you have it doing anyway)....that would be just one of many solutions. So you're little security freakout is way out of line.
I'm not sure if you just enjoy trolling but your attitude isn't appreciated and I would greatly appreciate it if you would just stop. Do everyone a favor and at least install FCS ONCE before you continue commenting on it. I really don't need
someone who is completely ignorant on the topic explaining to me how it works. I've been running it since day 1 and beta tested it prior to that.
EDIT:
Also, I've already through your little link a long time ago. So you're comment about me not reading it is not only out of line, it's down right childish. Nothing in that link discusses SCCM RE-pushing out the client. If I wanted to roll
out the client via GP or script then I wouldn't need discovery in SCCM to being with.
Also, you're second link doesn't even work.
You need to stop. -
I just updraded my iPod touch (4th gen) to IOS6.1.3 and thought I would get Facetime installed with it, but i do not see the app at all. is there something i need to do to get it ? My iPOD Model number is MC544LL/A. Is Facetime not supported on this ?
It is supported on the 4th generation.
Is FaceTime restricted in Settings > General > Restrictions? -
Endeca 7.5.1.1 is not getting properly installed
Hi,
can anyone please help in this regard. I am trying to setup Endeca 7.5.1.1 on win7 enterprise 64 bit. I have executed the Endeca Server installer which created a folder named 'EndecaServer7.5.1_1' in Middleware folder(C:\Oracle\Middleware) .While creating a new domain in weblogic for Endeca Server, I'm not getting any options for selecting 'Oracle Endeca server' however getting option to select 'Oracle JRF'.
I can see under C:\Oracle\Middleware\EndecaServer7.5.1_1 common/templates folder is not generated which is perhaps must. However the whole installation goes smooth and no error occurs but at time of domain creation Endecca doesn't come up as an option. Please some one help in this regard.
AKPI've tryied it before, but don't understand plug and other things how it's working and didn't get sound output at all
EDIT: As I know, speaker test is working with 5.1, because it's said by command. But applications use only 1 output. I mean card ca0106 and device 0 (default) is front speakers and other output 3.5mm jacks are likely "disabled".
So I'm asking, is it possible to set default device with multiple output 3.5mm jacks?
pcm.!default {
type hw
card CA0106
device 2
ctl.!default {
type hw
card CA0106
This uses my my center and subwoofer. Without mentioning device it's default is front left and right. And I thought, that just stereo works. But works just one output. And as I said, speaker test works fine as 5.1, but that's just a test, where are outputs defined in /usr/share/alsa/pcm or /cards... There is ca0106.
I'm tired of this, so is it possible to use all jacks? Whole card? In /usr/share/alsa/cards and in ca0106.conf I've seen IEC958 defined at the bottom of the file. But cards doesn't have any IEC958 on it.
I want all 3.5mm outputs and not only one defined. And true surround, not copied from one output to others. Can you help me please?
EDIT: For example this is not working via Firefox or MPD: http://www.mysurround.com/en/info-test OGG file Hear left speaker and when he says center, it comes from right speaker.
Last edited by Zemtriz (2013-02-26 09:26:39) -
Using windows vista I can not get the install to complete and work properly with a usb connection.
I am running Vista (32 bit) and I was trying to update to new HP software. Tried using full software install from file on HP website (release 14.0 full version). When I try to install, it will not recognize the usb connection of the software. I tried going back to version that came with the printer and had a similar problem. Now I am stuck not being able to get either version 12 (which came with the system) or version 14 (new update on website).
I need help trying to figure out how to get the software to go through and connect properly using usb and having the scan function working.......
Any ideas.Hi,
Have you tried plugging the USB into a differnt port at the back of your PC?
IS the USB directly connected to your PC and not through any USB hub or extention?
Do you see any response while plugging the USB to your computer?
If yes, please clarify.
I would also suggest trying a different USB cord, not longer than 2-3 meters long and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Why can't I get the "Install App" button in the app store to work for OX Mavericks?
I am trying to install OS Mavericks and I can not get the "Install App" button to work in the App store. When I double click it runs for 2 seconds and then stops. I am running OS Lion 10.7.5 now so I should be able to install and run OS Mavericks. What am I doing wrong or can anyone tell me what I need to do? Thanks!
gwen168 wrote:
... When I double click it runs for 2 seconds and then stops.
Single-click the button. -
Mac does not recognize the install DVD
I can not get the install DVD to work. I am running a G5 1.6 GHZ, 1.5 GB ram and OS X 10.3.9.
Tried just about everything, but it will not open on the desktop. Tried a restart with it in the drive holding down the C key but it just ejects the DVD.
What y'all think?
Thanks.Reply to all;
I can open other DvD's with the drive. It is OK. I purchased this from macmall in Dec, just got enough nerve to install it. It does have a few little scratches on it though. Could they have sold me a used one? -
Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the serial number. Is it because it wasn't uninstalled on the previous laptop? What to do now?? Thx!
Maybe this can help someone else... I simply had to properly uninstall CS3 and reinstall it again after that. I think that sorted it! I also remember having a similar issue with Macs at work a couple of years back. Not sure whether the same applies to CS5/CS6. Here's a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS. I'm on OS X 10.9.2 but it worked just fine. Remove Creative Suite 3 and CS3 products
-
When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Hello I have lost my serial number for adobe photoshop elements 13. Bought from John Lewis last month. I did have it installed but had to uninstall but cannot find the any of the packaging etc plus did not register. What is the best way of getting it installed again/replacement? Thanks
Do you have the receipt? If you have proof of ownership, you _may_ be able to persuade Customer Support to help you out. I imagine you would need to scan and email that proof if it works at all.
-
i can not get itunes to install and open on my new laptop i am so frustrated i uninstalled and reinstalled at least a dozen times in the last month
i got a error 7 this time but have had diff ones befpre please helpWill iTunes open in safe mode? Hold down CTRL+SHIFT as, or immediately after, you click the icon that starts iTunes and keep holding until you see this prompt.
Click Continue.
Assuming iTunes has opened, enable the menu bar, if necessary, with CTRL+B. Then go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Press OK, close iTunes, wait until it has had a chance to fully close then reopen.
Will iTunes open normally now?
If not, see Troubleshooting issues with iTunes for Windows updates for genral advice.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
tt2
Message was edited by: turingtest2 -
I have just recently updated my Firefox and now when I try to get on firefox it just keeps trying to load and then says it has stopped responding. I have uninstalled it and then re-installed it, this didn't help. Now have to use Internet Explore cause firefox wont work!
This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
I purchased a new monthly-paid subscription for 1 year(light room).i uninstall it from my desk top and try to install on my lap top. keep getting error saying trial expired.live chat is not going through and i am struggling to get it install.
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
PS - you did not need to uninstall from your desktop to install on your laptop
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both computer Cloud subscription activations may not be in use at the same time -
I am getting error 205 while trying to install Creative Cloud. I already had chated with support, Uninstalled CC and tried to install it again. From the Adobe site, the page keeps loading eternally, from the previous installer, it gives me error 205. What to do? Give up on CC?
This is not the first time I get it, and it seems a recurring problem.Milliet are you on a managed network? If not then please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve error 205.
-
Numerous attempts at a clean install of iTunes have failed. I am running Win7 64 bit on a Toshiba L series Satellite w/8G RAM and 100 G HDD space. Error message was (-42404), but following a complete (recommended) uninstall am now getting "Error 7". The prior uninstall included the establishment of administrator rights to files and folders left in the Apple folder after running the uninstaller, and successfully removing ALL visible and hidden Apple files and folders.
Any other suggestions out there folks?On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
Sorry
8(
Hope this helps
Maybe you are looking for
-
How do I reset trackpad gestures to defaults?
Morning, I have a new rMBP and I've restored my user account, files etc from a Time Machine backup of a 2007 MBP, also running Mavericks. I've found that forward/backward (two-finger) swipes don't work very well in programs like Safari, iPhoto etc. I
-
ORA-00932 Error using 11g and the SDO_RELATE function. Works fine in 10g
Hello, If I run this query in Oracle 11g: SELECT M.FID, MAX(M.VERSION) AS VERSION FROM SW_PB.A_ROADNODEINFORMATION M, SW_PB.ROADNODE N WHERE M.REFERENCETOROADNODE = N.FID AND M.NODEVERSION = N.VERSION AND M.CATALOGUEID <= 477 AND MDSYS.SDO_RELATE( N.
-
How do I remove the dead "white space" when printing?
I'd like to print something from Safari and would like the image to be completely borderless...but Safari seems to insist on adding padding/margin around the image. Example: http://share.shpigford.com/images/print_margin-20090524-161723.png I've trie
-
Adding different images to different panels
If I am having a class which is extending Applet not JApplet and in that I am having CardLayout with 4 different panels. If I want to add 4 different images 2 these Panels what is the solution? Can anyone please help?
-
How do I eliminate the iPhone passcode
How do I eliminate the iPhone passcode?