Uninstalled Trial version of Elements 7 (Trial Version) Now Computer won't boot

Hi All,
Thanks for reading......
I installed Elements 7 Yesterday (Trial) to await my purchased version, so I could get the 'feel' of the program .......
Today my software arrived, read the booklet (Getting Started) which say's "it's a good idea to uninstall the trial version first", this I did and re-booted the computer but it will not start as normal, left with a blank screen with flashing cursor at the top left of the screen.....
Win XP Pro SP3
Any advice, help please

There have been many users here in the forum who have been successfully been able to uninstall PSE 7 trial from the Windows XP SP3 machine without running into such kind of error. I believe this problem is not related with PSE7.
May be you can do some troubleshooting with Ms
Regards,
Ankush

Similar Messages

  • Installed new bios and now computer won't boot

    I just installed the new bios for my  HP Pavilion dv6704nr Entertainment Notebook PC laptop off the hp website and now my computer won't boot.  I tried removing all power (including the 3 volt battery) and it still won't turn on.  I Then tried the windows + B keys at boot and still nothing.  I have windows7 64 bit OS and installed the vista 64 bit bios (the only 64 bit bios they had).  Any help would be greatly appreciated.
    Thanks

    try runnng system restore from recovery manager, if the OS is changed then run recovery
    ***Click on “Kudos” STAR to say thanks!***

  • Installed os X Mountain Lion and now computer won't boot (first had keyboard issues-reverse caps)

    Hi all,
    I just updated my macbook air to osX mountain lion and now it will not boot at all.. At first I was having issues with the keyboard and keys typying weird characters.. and the caps lock was stuck on reverse.  Now I have nothing.. Can someone help.

    What happens when you try to boot?

  • Added new memory, now computer won't boot at all

    Hello
    I added a new pair of 2*8GB Coursair memory along with my old memory which was 2*2GB, for a total of 20GB Ram. It was working fine for a day (except one random restart), but got steadily worse. Yesterday iMac was shutting and restarting more frequently. I decided to remove the old pair thinking the   different brands may be causing a disturbance. I did, but the restarting didn't stop. I removed them again to try put it back more firmly or something, that was the last time my iMac booted. It will show the apple logo, then some short loading bar will come up, then it would promprtly shut down.
    I tried putting back my original RAM and it still wouldn't boot. Tried them individually, new old, different slots, nothing worked.
    So I guess I damaged my memory slots or all my RAM modules stopped working. Any ideas what to do next? I've already requested a replacement for the new RAM.
    Some extra info:
    -Old ram was running at 1333Hz and new one was 1666Hz, I tried them together .
    -First time I tried to remove RAM, I tried to pluck them out with my hands by leveraging the sides with a small screw driver. Realised I had to pull the black thing later on. Don't think I applied too much force though.

    Well, you should not mix different specs RAM. And, it's best to purchase RAM for the very finicky Macs from either OWC (macsales.com) or Crucial which guarantee the RAM to be Mac compatible and offer a lifetime warranty.
    I would guess that the new incorrect spec RAM is the problem. Additionally, you might have damaged the slots inadvertantly.
    You might need to take it to your nearest Genius Bar for a free evaluation. Additionally, I would return the RAM as not being compatible.

  • I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation

    I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation of 12, which I am removing. How do I correctly unstall the old Elements 12, and install the new elements 12 from disk, and retain all albums and libraries from the old Elements 12?

    You're welcome.  It was not an answer, it was a question, and it could lead to being helpful if you explain why you think you need to uninstall.
    As far as uninstalling goes, you will uninstall it like you do for any program, which depends on what kind of operating system you have.  If you wish to retain albums and whatnot, maybe the following link can provide some guidance.
    Photoshop Elements Help / Use Backup, Restore to move catalog | Organizer | Elements 6 or later
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html#ma in_Special_notes_if_you_restore_a_catalog_from_a_previous_version_of_Photoshop_Elements

  • I just downloaded the new version of iTunes 10 and now it won't let me drag and drop any files from my computer.

    I just downloaded the new version of iTunes 10 and now it won't let me drag and drop any files from my computer into my iTunes. It lets me play the song from the folder in my computer and then it opens with iTunes and plays the song all the way through, but then if I try to play it again, it says the file cannot be located. So then I go to locate and go to the folder and all that and select it and nothing happens.

    Not sure whether for instance you initially had a Yahoo optimised version of Firefox, and have now overwritten it with an official Mozilla version. Although the Mozilla version should NOT add unwanted features, but the Yahoo version may well do.
    If you merely need to find the Yahoo emails page quickly just add it as a bookmark or as a bookmark on the Bookmarks toolbar and make sure that is visible.
    Clicking the star icon on the location bar whilst looking at your emails will bookmark the page.
    * [[How to use bookmarks to save and organize your favorite websites]]
    * [[Bookmarks Toolbar - Display your favorite websites at the top of the Firefox window]]
    I do not use Yahoo myself,and am not sure what add-ons are available. You could search yourself using
    * FirefoxButton -> add-ons
    ** see [[Find and install add-ons to add features to Firefox]]
    ** examples [https://addons.mozilla.org/en-us/firefox/addon/yahoo-toolbar/ yahoo toolbar] & [https://addons.mozilla.org/en-us/firefox/addon/yahoo-mail-notifier/ mail notifier]
    * also look at Yahoo's own information such as http://help.yahoo.com/tutorials/toolbar/cl3/c3_ff_toolbar1.html

  • I updated my iPhone 4 to version 7.0.3 and now it won't turn on

    I updated my iPhone 4 to version 7.0.3 and now it won't turn on

    Are you sure the update is done?
    You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • Performed Jukebox Driver Upgrade version 1.30.03 now computer won't connect to Zen To

    I installed "Creative Zen and Jukebox Driver Upgrade version .30.03" and now computer won't connect to Zen Touch
    Any thoughts or ideas on why this happened or how to fix it's

    I've seen someone else mention this also.
    Do you still have your install CD? You can try installing the drivers from here.

  • Set sharing on system to read only now computer wlll not boot up

    set sharing on system to read only now computer wlll not boot up

    Hello skiboat2, 
    Because the permissions have been changed, you will need to put them back to what they were before. One of the ways to do that is to reinstall your OS X to make sure that everything permission wise gets put back to what it needs to be to work properly. Based of to the operating system that you say you have, I have provided the steps for reinstalling Snow Leopard. When doing this, it does not overwrite your personal data; it only touches the operating system. 
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.  

  • My hard drive failed, has been replaced, and now it won't boot to CD.

    My hard drive failed, has been replaced, and now it won't boot to CD to install the OS package. It would boot for a while, get through the first cd of install and would stop randomly in the next install. I found out that the installation disk was cracked so I went out and purchased the Mac Box Set which includes Mac OS X Snow Leopard, iLife '09 and iWork '09 under advisement from an associate at the local apple store. Now, I try installing this new OS disk and all I get is the apple logo without a spinning wheel for about 10 minutes and the computer restarts and does it again. I have tried booting from disk, holding c while starting up, and in safemode, holding shift while booting. Please help save my poor poor macbook!!!

    These errors look like corrupt or missing files that leopard requires. It sound like you need to start from scratch: format your drive, reload Leopard. I realize that this is probably what you are trying to do.
    If you cannot boot from install DVD and cannot successfully get into Safemode or Single usermode (due to a corrupt or incomplete install) then you will need another computer to assist you.
    If you can get it into Target Disk Mode and have another Mac you could plug it into that Mac and reformat it.
    If it will not go into TDM then you may need to take it out and put it into an external enclosure to plug into another Mac to format it.

  • Please Help: Installed new CPU (i7) now system won't boot.

    I'm hoping someone can help.
    I have an MSI H55M-P31 (MS-7636) motherboard, and I updated the BIOS to 1.A0.
    But when I installed the new CPU, I get 3 Long beeps, and then my computer won't boot.
    I have 4Gigs of Memory
    Current CPU: (working 100%)
    3.07 gigahertz Intel Core i3 540
    64 kilobyte primary memory cache
    256 kilobyte secondary memory cache
    4096 kilobyte tertiary memory cache
    64-bit ready
    Multi-core (2 total)
    Hyper-threaded (4 total)
    500watt PSU
    Please Help, I don't know what to do now. (did check CPU compatibility on website - i7870)

    What PSU is that and what are the ratings of that PSU ? See the label on the side.
    Are you trying to use the onboard graphics?
    That CPU does not have integrated graphics.  http://ark.intel.com/products/41315

  • Changed access permissions now machine won't boot. Utilising deep breathing techniques until help appears.

    Maybe a brain snap but I changed the access permissions on the hardrive to everyone-no access, what do I need to do. After  20 minutes of beachballing I pmowered down, and now it won't boot up, gets stuck on the apple boot up screen. There also exists in permissions another access setting  admin-readwrite. Would appreciate some heads up on what I can do (trying not to panic). 

    See this User Tip by Niel: I accidentally set a disk's permissions to No Access ...
    https://discussions.apple.com/docs/DOC-2240

  • I replaced the screen on my late 2007 laptop, now it won't boot. It Bongs and the wheel turns and then it turns off. I have tried a tech tool pro 3 disk, no results tried the osX tiger disk no results but bong and wheel. any ideas?

    I replaced the screen on my late 2007 laptop, now it won't boot. It Bongs and the wheel turns and then it turns off. I have tried a tech tool pro 3 disk, no results tried the osX tiger disk no results but bong and wheel. any ideas?
    I have not tried disk warrior yet,but will. I had it stored until I could get screen, battery is dead, and to be honest I forgot which OS I have in it, If I can Get screen up maybe I can get my info.
    sbckr

    Hi there sbckr,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    -Griff W. 

  • Trial Version of Elements 12 Froze My Computer When Uploading

    I am trying to use the trial version of Elements 12, and it froze my computer when I tried to upload photos.  What do I do?

    This forum is only to discuss how the forums operate, not products
    If you go to the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the Adobe product(s) you use
    When you find the correct forum (Photoshop Elements or Premiere Elements ???) you need to provide a lot more information for someone to help
    Windows or Mac and hardware details, to start

  • Downloaded 4.o firefox, my mac even tho it is osx,is not compatible,replaced the older version with new...now new won't run, old is gone.. want my older version back,bookmarks,etc...how can i restore ,or at least download the 3.6 i had before?

    have tried to recover files from hard drive,folders..etc...figuring the older version must be somewhere on my computer....but i haven't been able to locate it,or successfully download my old version

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    You can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

Maybe you are looking for

  • PO message output type

    HI, I have configured one document type and configured all the settings for message output type. But while creatin PO for one plant it is coming for another Plant it is not coming. pls advice regards sp

  • HT4972 Will I lose everything in my iPad if I upgrade it

    Will I lose everything in my iPad if I upgrade I've never hooked my iPad up to my desk top

  • MOV files audio

    Using PE11 and importing a video via SD card into the organizer, when played in the organizer panel, all audio/video sync up and look and sound great. However, when I attempt to add the same file to edit Premiere Elements, I have a 48 second video th

  • How to use CASE.

    I am trying to use the function case but not sure what I am missing. Can someone please let me know where im going wrong with the following query? SELECT location_id,      CASE      WHEN  cost < 1 THEN count(target_id) ELSE 0      END  '< 1'      CAS

  • How to create a subform with several initialized rows?

    I have a repeating subform in my form that should start with several initialized rows. I can create several empty rows by setting the binding to "repeat subform for each data item" and setting the "min count", but I'd like to have values in one of th